HP 1280 Operation & User’s Manual

17-inch Color Display 15.7 inch Viewable Image User’s Guide HP Ergo 1280 17-Zoll-Farbbildschirm 15.7 Zoll Bildanzeige Benutzerhandbuch HP Ergo 1280 Moniteur couleur 17 pouces Affichage 15,7 pouces Guide de l’utilisateur HP Ergo 1280 Pantalla de color de 17 pulgadas 15.7 pulgadas de imagen visualizada Manual del Usuario HP Ergo 1280 Video a colori da 17 pollici 15.7 effetivi per l’immagine Manual utente Léase esto primero mykonos.bk : mykfcov.fb4 Page 1 Monday, November 25, 1996 5:41 PM

Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Hewlett- Packard. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. Hinweis Inhaltliche Änderungen vorbehalten. Hewlett-Packard übernimmt keine Garantie welcher Art auch immer für diese Ausrüstung, einschließlich der (doch nicht begrenzt auf die) Qualitätsgarantie und die Garantie bezüglich Eignung für einen bestimmten Zweck. Hewlett-Packard haftet nicht für in dieser Dokumentation enthaltene Fehler oder für unbeabsichtigte oder indirekte Schäden in Verbindung mit der Lieferung, der Leistung oder der Benutzung der Ausrüstung. Hewlett-Packard übernimmt keine Haftung fur den Betrieb oder die Zuverlässigkeit seiner Software, wenn diese auf Hardware benutzt wird, die nicht von Hewlett-Packard geliefert wurde. Dieses Dokument enthalt proprietäre Informationen, die durch das Copyright geschützt sind. Alle Rechte vorbehalten. Dieses Dokument darf ohne vorherige schriftliche Genehmigung der Hewlett-Packard Company weder ganz noch teilweise fotokopiert, reproduziert oder übersetzt werden. Avertissement Les informations contenues dans ce document peuvent être modifiées sans préavis. Hewlett-Packard ne donne aucune garantie de quelque sorte que ce soit concernant, sans que ce soit limitatif, les garanties implicites de qualité commerciale de ce matériel, ou la bonne adaptation de celui-ci à un usage particulier. Hewlett-Packard n’est pas responsable des erreurs pouvant apparaître dans ce manuel et n’est pas non plus responsable des dommages directs ou indirects résultant de l’équipement, des performances et de l’utilisation de ce matériel. Hewlett-Packard ne saurait être tenu pour responsable de l’utilisation et de la fiabilité de son logiciel sur des matériels non fournis par Hewlett-Packard. Les informations contenues dans ce document sont originales et protégées par copyright. Tous droits réservés. L’acheteur s’interdit en conséquence de les photocopier, de les reproduire ou de les traduire dans toute autre langue, sauf accord préalable et écrit de Hewlett-Packard. Aviso La información contenida en este documento está sujeta a cambios sin previo aviso. Hewlett-Packard no ofrece ningún tipo de garantía con respecto a este material, incluyendo, pero sin limitarse a, las garantías implícitas de comerciabilidad e idoneidad para un fin determinado. Hewlett-Packard no asume responsabilidad alguna por los posibles errores contenidos o por los daños casuales o emergentes relacionados con el suministro, funcionamiento o uso de este material. Hewlett-Packard no asume responsabilidad alguna por el uso o fiabilidad de su software en equipos que no hayan sido fabricados por Hewlett-Packard. Este documento contiene información patentada, protegida por las leyes del copyright. Reservados todos los derechos. Ninguna parte de este documento puede ser fotocopiada, reproducida o traducida a otro idioma sin la autorización previa y por escrito de Hewlett-Packard Company. Avviso Le informazioni contenute in questo documento sono soggette a cambiamento senza preavviso. Hewlett-Packard non rilascia garanzie di alcun tipo riguardo a questo materiale, comprese le garanzie implicite di commerciabilità e di idoneità per uno scopo particolare. Hewlett-Packard non sarà ritenuta responsabile per errori contenuti in questo documento, né per danni accidentali o conseguenti alla fornitura, alle prestazioni o all’uso di questo materiale. Hewlett-Packard non si assume alcuna responsabilità riguardo all’uso o all’affidabilità del proprio software su apparecchiature di altri produttori. Questo documento contiene informazioni di proprietà protette da copyright. Tutti i diritti sono riservati. Nessuna parte di questo documento può essere fotocopiata, riprodotta o tradotta in un’altra lingua senza un precedente consenso scritto di Hewlett- Packard Company. Hewlett-Packard France Grenoble Personal Computer Division Technical Marketing 38053 Grenoble Cedex 9 France mykonos.bk : mykfcov.fb4 Page 2 Monday, November 25, 1996 5:41 PM

15.7-inch Viewable Image User’s Guide On/Off switch Full scan screen that gives an edge to edge image Sony Trinitron aperture grill tube with 0.25 stripe pitch for excellent graphics Non-glare, anti-static screen coating Control buttons used to adjust the display’s settings Status indicator mykonos.bk : mykon-us.fb4 Page 1 Monday, November 25, 1996 5:41 PM

Important Safety Instructions 2 English Important Safety Instructions Before you plug in your new display, read these important safety instructions. WARNING Connect the display only to a grounded power outlet. Use the power cord supplied with the display or one with a properly grounded plug. Ensure the cable meets your country’s standards for safety. This display operates on all power systems, including “IT” power systems. To completely disconnect power at the display, remove the power cord from the power outlet. Ensure that the power outlet is easily accessible. To avoid electric shock and harm to your eyes by laser light, do not open the display cover. The display should be serviced by service personnel only. This HP display is a class I laser product. Do not attempt to make any adjustments to any laser source inside this display. The display is quite heavy (the weight is shown in the technical specifications). We recommend you ask the assistance of a second person when lifting or moving it. USA and Canada If the power cord is not supplied with your display, select the proper power cord according to your national electric safety codes. • USA: use a UL Listeddetachable power cord. • Canada: use a CSA certified detachable power cord. Si le cordon secteur n’est pas livré avec votre moniteur, utiliser un cordon secteur en accord avec votre code èlectrique national. • USA: utiliser un cordon secteur UL Liste. • Canada: utiliser un cordon secteur certifié CSA. mykonos.bk : mykon-us.fb4 Page 2 Monday, November 25, 1996 5:41 PM

What Your New Display Offers What Your New Display Offers The HP D2840A Ergo 1280 Display is a 17-inch, high resolution, multi-synchronous color display. Multi-synchronous means that the display supports a range of video modes. It can be used with Hewlett-Packard personal computers (or equivalent). Your HP D2840A color display has the following features: • A 17-inch Sony Trinitron1 tube, with a 15.7-inch viewable image, with a 0.25 mm stripe pitch for excellent graphics. It has a non-glare, antistatic screen coating. • Support of video modes up to Ultra VGA 1600 at high refresh rates. • Image adjustment using onscreen menus. Includes color adjustment and image rotation controls to optimize the quality and position of the image. • Display power management system (VESA2 standard) controlled from suitably equipped HP Vectra PCs to automatically reduce the power consumption of the display. Complies with the Energy Star Computers Program initiated by the US EPA3, and with the Swedish NUTEK4 specification for energy efficient displays. • Display Plug and Play capability (VESA DDC1/2B standard) that enables the display to identify itself to suitably equipped HP Vectra PCs. • Uses the latest VESA DDC 2B+ standard. This enables you to control the displayed image via the PC by using appropriate software (when available). • Compliance with ISO 9241-3 and ZH1/618 ergonomic standards. • Your HP D2840A complies with MPRII guidelines for upper limits of electrical and electrostatic emissions, from the Swedish National Board for Measurement and Testing. • Your HP D2840A complies with the TCO-925 and TCO-95 guidelines for low frequency electrical and magnetic fields, which require an even lower level of emissions than the MPR-II recommendations. • Complies with Blue Angel and the E2000 environmental requirements. 1. Trinitron is a trademark of Sony. 2. VESA is the Video Electronics Standards Association 3. The US EPA is the United States Environmental Protection Agency 4. NUTEK is the Swedish National Board for Industrial and Technical Development 5. Swedish Confederation of Professional Employees mykonos.bk : mykon-us.fb4 Page 3 Monday, November 25, 1996 5:41 PM

Setting Up Your Display 4 English Setting Up Your Display Where to Place the Display Place your display on a flat sturdy surface. Ensure the operating site is free from excessive heat, moisture, and sources of electromagnetic fields. Sources of electromagnetic fields include transformers, motors, and other displays. Connecting the Cables 1 Before you connect any cables, refer to the safety instructions at the beginning of this manual and make sure your PC and display are switched off. 2 Connect the video cable (it has a 15-pin plug) to the video outlet on your PC. Tighten the thumbscrews on the plug. 3 Connect the power cord to the display. 4 Plug the power cord into the power outlet. Video cable Power cords mykonos.bk : mykon-us.fb4 Page 4 Monday, November 25, 1996 5:41 PM

Setting Up Your Display NOTE The location of your PC’s video outlet may be different to the one shown in the diagram. Refer to the manual that came with your PC, if necessary. Setting the Language used by the On-Screen Menus After connecting the display to your PC, we recommend that you set the language used by the on-screen menus. To do this, follow these steps: 1 Switch on your PC and the display. 2 Press either the or the button on the front panel of the display to make the on-screen menu appear. 3 Use the and the buttons to scroll to TO MAIN MENU. 4 Press the button to select TO MAIN MENU. 5 Use the and the buttons to scroll to LANGUAGE. 6 Press the button to select LANGUAGE. 7 Use the and the buttons to scroll to the language you want. 8 Press the button to select the language. 9 Press at the same time both the or the buttons to close the on-screen menu. mykonos.bk : mykon-us.fb4 Page 5 Monday, November 25, 1996 5:41 PM

Using the Display 6 English Using the Display You can adjust the quality, position, size, and shape of the displayed image by using the on-screen menus. You use the buttons on the front panel of the display to navigate through these menus. The on/off switch is on the front of the display. Buttons to navigate through the on-screen menus On/off switch mykonos.bk : mykon-us.fb4 Page 6 Monday, November 25, 1996 5:41 PM

Using the Display Navigating Through the On-screen Menus Here is how to navigate through the on-screen menus using the buttons on the front panel of the display: To make this happen Press these buttons Directly adjust the default setting without making the on-screen menus appear. (The default setting may be brightness, contrast, or color. See “CREATE DEFAULT ITEM“ on page 9. and Make the on-screen menu appear (basic adjustments). or Scroll between menu items. or Select the highlighted menu item. Adjust the selected value (for example, width of the displayed image). and Exit the on-screen menu. Both and at the same time. Directly adjust the last selected item for up to 20 seconds after the on-screen menu disappears. and mykonos.bk : mykon-us.fb4 Page 7 Monday, November 25, 1996 5:41 PM

Using the Display 8 English A Map of the On-Screen Menus CONTRAST BRIGHTNESS WIDTH HORIZ CENTERING HEIGHT VERTICAL CENTERING DEGAUSSING CREATE DEFAULT ITEM TO MAIN MENU BASIC ADJUSTMENTS 70 Hz LANGUAGE BASIC ADJUSTMENTS GEOMETRY IMAGE MAIN MENU WIDTH HORIZ CENTERING HEIGHT VERTICAL CENTERING PINCUSHION CORRECT HORIZ SYMMETRY TRAPEZOID CORRECT ORTHOGONAL CORRECT TILT CORRECTION FACTORY PRESET SHAPE TO MAIN MENU GEOMETRY ENGLISH DEUTSCH ITALIANO FRANÇAIS ESPAÑOL TO MAIN MENU LANGUAGE CONTRAST BRIGHTNESS COLOR TEMP RED GREEN BLUE MOIRE CREATE CUSTOM IMAGE FACTORY PRESET IMAGE TO MAIN MENU IMAGE CONTRAST BRIGHTNESS RED GREEN BLUE SAVE TO CUSTOM 1 SAVE TO CUSTOM 2 EXIT WITHOUT SAVING CREATE CUSTOM IMAGE mykonos.bk : mykon-us.fb4 Page 8 Monday, November 25, 1996 5:41 PM

Using the Display The Basic Adjustments Sub-Menu Here is what the BASIC ADJUSTMENTS sub-menu contains: CONTRAST To adjust the contrast (image white level), select this menu item. Contrast is the difference in brightness between the dark and light parts of the displayed image. BRIGHTNESS To adjust the overall picture brightness (image black level), select this menu item. Set the brightness so that the dark areas of the display remain black. WIDTH To adjust the width of the displayed image, select this menu item. HORIZ CENTERING To adjust the horizontal position of the displayed image, select this menu item. HEIGHT To adjust the height of the displayed image, select this menu item. VERTICAL CENTERING To adjust the vertical position of the displayed image, select this menu item. DEGAUSSING To degauss the display, select this menu item. If you always leave your display switched on, it is recommended that you degauss at least every week to remove any color impurities. Degaussing is accompanied by brief instability of the displayed image and a brief humming sound. CREATE DEFAULT ITEM To choose which setting is adjusted directly when you use the buttons without displaying the on-screen menus, use this menu item. You can choose from BRIGHTNESS, CONTRAST, and COLOR TEMP. The current default item is indicated with a plus (+) sign next to it. Scroll to the item you want as the the default adjustment and press the button. TO MAIN MENU To make the main menu appear, select this menu item. Geometry Adjustments Sub-Menu Here is what the GEOMETRY sub-menu contains: WIDTH See The Basic Adjustments Sub-Menu. mykonos.bk : mykon-us.fb4 Page 9 Monday, November 25, 1996 5:41 PM

Using the Display 10 English HORIZ CENTERING See The Basic Adjustments Sub-Menu. HEIGHT See The Basic Adjustments Sub-Menu. VERTICAL CENTERING See The Basic Adjustments Sub-Menu. PINCUSHION CORRECT To adjust the displayed image if its vertical edges appear to bow in or out, select this menu item. HORIZ SYMMETRY To adjust the displayed image if its vertical edges appear curved, select this menu item. TRAPEZOID CORRECT To adjust the displayed image if its vertical edges do not appear parallel, select this menu item. ORTHOGONAL CORRECT To adjust the displayed image if its vertical edges appear tilted, select this menu item. TILT CORRECTION To adjust the displayed image if it appears to be rotated, select this menu item. Depending on the orientation of your display, for example, whether it faces north or south, you may experience some rotation of the image. This effect is due to the influence of the earth’s magnetic field and is normal for all displays. FACTORY PRESET SHAPE To return all of the shape settings to those set by the factory, select this menu item. Image Adjustments Sub-Menu Here is what the IMAGE ADJUSTMENTS sub-menu contains: CONTRAST See The Basic Adjustments Sub-Menu. BRIGHTNESS See The Basic Adjustments Sub-Menu. COLOR TEMP To change the factory preset color, select this menu item. The lower the color temperature, the warmer the hue. The higher the color temperature, the colder the hue. For example, choosing 5000 gives a white with a reddish tinge, choosing 6500 gives a white which is close to average daylight, choosing 9300 gives a white with a noticeable bluish tinge. You can also set the color to your own preferences by using the menu items RED, GREEN, BLUE, and CREATE CUSTOM IMAGE. mykonos.bk : mykon-us.fb4 Page 10 Monday, November 25, 1996 5:41 PM

Using the Display RED To adjust the amount of red present in the displayed image, use this menu item. GREEN To adjust the amount of green present in the displayed image, use this menu item. BLUE To adjust the amount of blue present in the displayed image, use this menu item. MOIRE To reduce moire interference with the displayed image, select this menu item. Moire is a visual pattern with ripples and waves that can result from using very high resolutions. CAUTION Overcorrecting for the effects of horizontal or vertical moire may affect the picture quality of your display. CREATE CUSTOM IMAGE You can define two customized image settings. This enables you to create different working environments for applications that require different image settings. Text heavy applications require high color temperatures (9300K); graphics intensive applications require a more natural color setting (6500K). To create and save personal settings for contrast, brightness, and color: 1 Select the CREATE CUSTOM IMAGE menu item. The following menu appears: 2 Set values for each of the items that you want to change. CONTRAST BRIGHTNESS RED GREEN BLUE SAVE TO CUSTOM 1 SAVE TO CUSTOM 2 EXIT WITHOUT SAVING CREATE CUSTOM IMAGE mykonos.bk : mykon-us.fb4 Page 11 Monday, November 25, 1996 5:41 PM

Using the Display 12 English 3 Select SAVE TO CUSTOM 1 or SAVE TO CUSTOM 2. To select the settings saved in CUSTOM 1 and CUSTOM 2, use the COLOR TEMP menu item. FACTORY PRESET IMAGE To return all of the image settings to those set by the factory, select this menu item. Setting the Amount of Displayed Information To set the amount of displayed information, change the screen resolution of your PC. The higher the screen resolution, the more information you can see on the screen. It is recommended that you use a resolution of 1024 × 768 at 85Hz or 1280×1024 at 85Hz. This gives easy-to-read characters, a large amount of displayed information, and a flicker-free image. To find out which resolutions are supported by your display, refer to “Supported Video Modes” on page 15. To change the screen resolution, please refer to the manual that came with your PC or your operating system documentation, if necessary. Your display has a Plug and Play capability (VESA DDC1/2B+ standard) that enables it to identify itself to suitably equipped HP Vectra PCs. This will automatically give you the best refresh rate for the resolution that you have set. Also, by using the appropriate software (when available), you can adjust the display settings directly from your PC. Minimizing Eye Strain To avoid screen flicker and minimize eye strain, use the highest supported image refresh rate for the chosen resolution, for example 85Hz for 1280×1024. The image refresh rate is the number of times per second that the image is refreshed. mykonos.bk : mykon-us.fb4 Page 12 Monday, November 25, 1996 5:41 PM

Using the Display To find out which image refresh rates are supported by your display, refer to “Supported Video Modes” on page 15. To set the image refresh rate (also known as the vertical frequency), refer to the manual that came with your PC or your operating system documentation, if necessary. If your PC supports Plug and Play, it will automatically select the best refresh rate for the screen resolution you have set. Minimizing Energy Consumption If your PC supports VESA display power management (available on many HP Vectra PCs), you can minimize the power consumed by the display. There are two power saving modes: • Standby mode1 (uses less than 30W). In this mode, the display’s front panel indicator light is green. • Sleep mode2 (uses less than 1W). In this mode, the display’s front panel indicator light is green blinking. To set these power saving modes, refer to the manual that came with your PC. If your screen is not displaying an image, check the front panel indicator light first — your display may be in a power saving mode. 1. Standby mode is activated when vertical sync is cut by the video controller. 2. Sleep mode is activated when both vertical and horizontal sync are cut by the video controller. mykonos.bk : mykon-us.fb4 Page 13 Monday, November 25, 1996 5:41 PM

Technical Specifications 14 English Technical Specifications 1. Use the standard image sizes to avoid distortion of the displayed image. PICTURE TUBE Size 17-inch Trinitron/ 15.7-inch viewable image Phosphorous Red, Green, Blue short persistence Stripe pitch 0.25 mm super-fine stripe pitch Face Plate Anti-glare, anti-static coating INPUT SIGNAL Video 0.66 Vp-p analog RGB Synchronization Separated H/V (TTL level), H/V mixed (TTL level sync-on-green) INTERFACE Input Connectors 15-pin mini D-SUB SCANNING FREQUENCY Horizontal 31 to 92kHz Vertical 50 to 150 Hz MAX. RESOLUTION (H × V) 1600 ×1200 mode (60 Hz refresh rate) WARM-UP TIME 30 minutes to reach optimum performance level PIXEL CLOCK 160 MHz Maximum IMAGE SIZE Standard size1: 300(H) × 225(V) mm (for all resolutions) Maximum size: 321(H) × 236.5(V)mm POWER SOURCE AC 90 to 264 V, 47 to 63 Hz, 130 W (max), less than 30W in standby mode, less than 1W in sleep mode. OPERATING ENVIRONMENT Temperature +5 °C to +40 °C (operating) - 40 °C to +65 °C (storage) Humidity 5% RH through 90% (without condensation) CABINET DIMENSIONS 413(H) × 422(W) × 433(D)mm WEIGHT 23 kg TILT/SWIVEL STAND Tilt Angle - 5° to +20° Swivel Angle ±87.5° mykonos.bk : mykon-us.fb4 Page 14 Monday, November 25, 1996 5:41 PM

Supported Video Modes Supported Video Modes Your display supports the video modes shown in the table below. CAUTION Selecting a screen resolution/vertical frequency combination higher than 1600×1200 at 60Hz can damage your display. Screen Resolution Image Refresh Rate Video Solution 640×480 60 Hz VGA 640×480 75 Hz Ergonomic VGA 640×480 85 Hz Ergonomic VGA 800×600 75 Hz Ergonomic Super VGA 800×600 85Hz Ergonomic Super VGA 1024×768 75 Hz Ergonomic Ultra VGA 1024 1024×768 85Hz Ergonomic Ultra VGA 1024 1280×1024 75 Hz Ergonomic Ultra VGA 1280 1280×1024 85 Hz Ergonomic Ultra VGA 1280 1600×1200 60 Hz Ultra VGA 1600 mykonos.bk : mykon-us.fb4 Page 15 Monday, November 25, 1996 5:41 PM

Care and Cleaning 16 English Care and Cleaning Do not place anything on top of the display. Doing so may block the display vents and cause damage to the display due to overheating. Do not let liquid get on or into the display. To maximize screen life and prevent damage to the picture tube (such as burned phosphor due to leaving the same image on the screen for a long time), it is recommended that you: • Use the display power management system (on HP Vectra PCs) or a screen saver program. • Avoid setting contrast and brightness to their maximum levels for prolonged periods. • If you do not have a power management system or a screen saver program, switch the display off or reduce the brightness and contrast to minimum levels when the display is not in use. Your display is automatically demagnetized each time it is switched on. This ensures color quality. To maintain color quality during use or after turning or moving your display, use the degauss option. Refer to “DEGAUSSING“ on page 9. Your display has an anti-glare, anti-static screen coating. To prevent damage to the display screen’s coating, use a regular household glass cleaner when cleaning the screen. To clean the screen: 1 Switch the display off and remove the power plug (pull the plug, not the cable). 2 Wet a soft cotton cloth with the cleaning solution and gently wipe the screen. Do not spray cleaner onto the screen because the cleaner may drip inside the display. 3 Dry with a clean, soft cotton cloth. Do not use cleaning solutions containing fluoride, acids, or alkalis. mykonos.bk : mykon-us.fb4 Page 16 Monday, November 25, 1996 5:41 PM

Hardware Warranty Hardware Warranty This HP display is covered by a limited hardware warranty for a period of three years from the date of purchase by the original end-user. The service provided includes on-site service during the first year of purchase, and for the following two years, return to an HP or repair-authorized reseller service-center. The above warranty shall not apply to defects resulting from: misuse (including “burned” screens); unauthorized modification; operation or storage outside the environmental specifications for the product; or in-transit damage. A defective display will be — at HP’s option — either repaired or replaced with a new or as-new unit of the same or equivalent model. Please refer to the warranty statement provided with your HP Vectra personal computer for customer responsibilities and other terms and conditions. Environmental Information HP has a strong commitment toward the environment. Your HP display has been designed to respect the environment as much as possible. HP can also take back your old display for recycling when it reaches the end of its useful life. In fact, HP has a product take-back program in several countries. The collected equipment is sent to of HP’s recycling facilities in Europe or the USA. As many parts as possible are reused. The remainder is recycled. Special care is taken for batteries and other potentially toxic substances, which are reduced to non-harmful components through a special chemical process. If you require more details about HP’s product take-back program, contact your dealer or your nearest HP Sales Office. The cathode ray tube used in this display does not contain cadmium. mykonos.bk : mykon-us.fb4 Page 17 Monday, November 25, 1996 5:41 PM

Regulatory Information 18 English Regulatory Information CONFORMITY DECLARATION according to ISO/IEC Guide 22 and EN 45014 Manufacturer’s Name: HEWLETT-PACKARD Manufacturer’s Address: 5, Avenue Raymond Chanas 38320 Eybens, FRANCE declares, that the product: Product Name: HP Ergo 1280 Color Display Model Number: D2840A conforms to the following Product Specifications: SAFETY International: IEC 950:1991 + A1 + A2 + A3 European: EN 60950:1992 + A1 + A2 EMC CISPR 22:1993 / EN 55022:1994 - Class B EN 50082-1:1992 IEC 801-2:1992 / prEN 55024-2:1992 - 4kV CD, 8 kV AD IEC 801-3:1984 - 3V/m IEC 801-4:1988 / prEN 55024-4:1992 - 1 kV Power lines IEC 555-2:1982 + A1:1985 / EN 60555-2:1987 IEC 1000-3-3:1994 / EN 61000-3-3:1995 Supplementary information: the product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC amended by the Directive 93/68/EEC, and carries the CE-marking accordingly. Jean Marc JULIA Grenoble, March 1997 Quality Manager mykonos.bk : mykon-us.fb4 Page 18 Monday, November 25, 1996 5:41 PM

Regulatory Information Notice for the USA: FCC Statement Federal Communications Commission (FCC) Radio Frequency Interference Statement (USA Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protections against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try one of more of the following measures: • Relocate the radio or television antenna. • Move the computer away from the radio or television. • Plug the computer into a different electrical outlet, so that the computer and the radio or television are on separate electrical circuits. • Make sure that all your peripheral devices are also FCC Class B certified. • Make sure you use only shielded cables to connect peripheral devices to your computer. • Consult your computer dealer, Hewlett-Packard, or an experienced radio/television technician for help. WARNING Hewlett-Packard’s system certification tests were conducted with HP-supported peripheral devices and HP shielded cables, such as those you received with your system. Cables used with this computer must be properly shielded to comply with the requirements of the FCC. Changes or modifications not expressly approved by Hewlett-Packard could void the user’s authority to operate the equipment. X-Ray Radiation Notice When operating, this product emits x-rays; however, it is well shielded and meets the safety and health requirements of various countries, such as the Radiation Act of Germany and the Radiation Control for Health and Safety Act of the United States. Radiation emitted by this product is less than 0.1 mR/hr (1uSv/hr) at a distance of 10 centimeters from the surface of the cathode ray tube. The x-ray radiation primarily depends on the characteristics of the cathode ray tube and its associated low voltage and high voltage circuitry. Internal controls have been adjusted to ensure safe operation. Only qualified personnel should perform any internal adjustments as specified in the service manual for this product. Replace the cathode ray tube with an identical CRT only. General Notice The HP D2840A Ergo 1280 Display has been tested according to MPR 1990:8 for Emission properties and meets the guidelines as given by MPR 1990:10 (2.01 - 2.04). It also complies with TCO-92 and TCO-95 specifications for measurement of magnetic fields, power-down and safety. mykonos.bk : mykon-us.fb4 Page 19 Monday, November 25, 1996 5:41 PM

Regulatory Information 20 English Notice for Japan Notice for Canada This Class “B” digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la Classe B respecte toutes les exigences du règlement sur le matériel brouilleur du Canada. Notice for the United Kingdom The HP D2840A 17 inch Color Display is approved under Approval Number NS/G/1234/J/100003 for indirect connection to public telecommunications systems within the United Kingdom. mykonos.bk : mykon-us.fb4 Page 20 Monday, November 25, 1996 5:41 PM

Manual Part Number D2840-90001 Printed in Finland - 11/96 mykonos.bk : mykbcov.fb4 Page xviii Monday, November 25, 1996 5:41 PM