HP USB Media Docking Station Operation & User’s Manual

Understanding the Basics 1-9 2. Plug the power cord into the ac adapter, then into a grounded ac outlet. Plug ac adapter connector into the port on the back of the docking system. C A U T I O N Use only an HP F1140A ac adapter (the type shipped with the Docking System) —do not use an ac adapter from the OmniBook or another product. Using an improper adapter could damage the OmniBook and will make your warranty invalid. 3. Place the cable cover on the docking system. ...

Making Connections 1-22 2. Move the speaker switch to the up position to enable both the OmniBook’s internal speakers and the external speakers. –or– Move the speaker switch to the down position to disable the internal speaker. Microphone or external audio source (such as a CD player) • Attach an amplified microphone to the line-in (1) connector. • Attach an external audio source to the audio-in (2) connector. To connect SCSI devices SCSI devices are disabled whenever you turn off the system or undock. 1. Make sure that each SCSI device is set to a unique ...

Understanding the Basics 1-13 To manually undock the OmniBook If for some reason you can’t undock the OmniBook using the Undock button, you can manually undock it. Manual undocking overrides password protection. To secure your OmniBook while docked, keep a Kensington MicroSaver lock attached to the security connector on the docking system. (See the following topic for instructions.) 1. Save your work and, if necessary, exit Windows. If you’re using Windows 95, be sure to use the shut down option from the Start menu. 2. Insert a key or other thin object into the ...

Making Connections 1-25 To remove a device from the undocked configuration When Windows 95 installs a new docking station device, it may include the device in both the docked and undocked configuration. To prevent problems when undocking, remove the device from the undocked configuration. 1. Double-click My Computer, Control Panel, System. 2. Click the Device Manager tab and find the card you installed in the list—if it is a network card, it will be under Network Adapters. 3. Select the card, then click Remove. 4. When the Confirm Device Removal box appears, sele ...

Making Connections 1-18 To connect a serial mouse 1. If you’re using Windows 95, go to step 2. –or– If you’re using Windows for Workgroups, save your work and exit Windows. You’ll be rebooting the OmniBook. 2. Attach the serial mouse to the docking system. 3. Dock the OmniBook. 4. If you’re using Windows 95, go to step 5. –or– If you’re using Windows for Workgroups, reboot the OmniBook. 5. If you’re using Windows 95 • Click Start, Settings, Control Panel, Mouse, General. • Click Change, then select Standard Serial Mouse. –or– If you� ...