Icom IC-80AD Operating Manual

Accessed repeater (RPT1) selection (UR) call sign selection Calling a CQ Calling a specific station Push and hold PTT to transmit, release to receive. In the same Area : CQCQCQ (e.g. JG3YMK) (e.g. IKOMA43) To other Area : Repeater name In the same Area : NOT USE In the same Zone : Repeater name (e.g. NARA43) To a different Zone : GW Select the linked repeater. Select the access repeater name. (e.g. HIRANO43) Select the UR call sign. Push to enter the DR mode. Rotate . Rotate . Rotate . Push . Push and hold Push and hold for 1 sec. for 1 sec. Displays the repeater icon RPT1 selection RPT2 selection UR call sign selection Displays the repeater icon Displays the UR call sign icon Display flushes To call CQ in the same zone, or a different zone, the settings are the same. This is a way to copy the call record contents (“CALLER,” “RXRPT1” and “RXRPT2”) into the call sign memory “UR” and the repeater list “R-L” at the same time, or individually. q Enter the RX CAL (RX call sign) mode. MENU ➪ RX CAL q Push [MENU ] to enter the Menu screen. w Rotate [DIAL] to select “RX CAL,” e then push [ ](5). • The RX call sign screen is displayed. w Rotate [DIAL] to select the desired record channel. e Push [ ](5) several times to select the desired call sign from CALLER, / (CALLER’s note), CALLED, RXRPT1 and RXRPT2. r Push [u](6) to enter the copy select mode. • The copy select screen is displayed. t Rotate [DIAL] to select the desired call sign to be copied, between “C ALL,” “C UR01”–“C UR60” and “C R-L.” • The “C ALL” selection won’t appear when either the station call sign memory or the repeater list has no blank channel. C ALL : Copy the caller call sign in “CALLER” into “UR” (station call sign memory) and the repeater call sign in “RXRPT1” / “RXRPT2” into the repeater list. This selection won’t ap­ pear when either the station call sign memory or the re­ peater list has no blank channel. C UR01– C UR60 : Copy the caller call sign in “CALLER” into “UR” (station call sign memory). This selection appears when entering the copy select mode (step r) from only “CALLER.” C R-L : Copy the repeater call sign in “RXRPT1” / “RXRPT2” into the repeater list. This selection appears when entering the copy select mode (step r) from only “RXRPT1” or “RXRPT2.” y Push [ ](5) to copy the selected record’s contents into the appropriate call sign memory or repeater list. u Push [MENU ] to return to the operating display. Displays call record channel Displays the CALLER’s call sign q Push q The previously selected screen appears w e Push e w Rotate ■ Storing Received call sign (UR, RPT1 or RPT2) A-6793-1EX i80AD/E80D DR mode operating guide ■ DR mode operation NOTE: • The access repeater scan is useful to find an accessible repeater. Start : Push and hold for 1 sec. Stop : Push once again. • Group selection is available while selecting UR call sign. Group selection: Push momentarily. “GRP CQ” (CQCQCQ), “GRP RP” (Repeater group) and “GRP UR” (UR call sign memo­ ries) momentarily appear in sequence. A specific station can be selected, or “GRP UR” in the group selection will appear, only when the UR call sign memory has been programmed. • The setting can be confirmed. Confirmation: Push and hold for 1sec. Rotate to display “UR,” “R1,” “R2,” “MY” and “FRQ” in sequence. Push and hold for 1 sec. to toggle the name display and call sign display. Name display is available only for repeater call signs that have programmed repeater names. Push once again to exit the confirmation screen. Erase the call record contents • Select “CLEAR” in step t, then push [ ](5) to erase the selected channel contents. First, program a MY call sign (Instruction manual: p. 36), then set it to the current call sign position (p. 47). Next program the repeater list (p. 40). After that, follow this guide to access a D-STAR repeater The CS-80/880* cloning software (free download software) is helpful for programming call signs or the repeater list. (Icom Global Site http://www.icom.co.jp/world/index.html) *Cloning cable is required.