Ikegami HC-D57 Brochure & Specs

HC-D57W AIT CCD Chip, 4:3 / 16:9 switchable aspect ratio. The two models are available: Ikegami portable cameras have entered upon a new stage in broadcast technology. Ikegami has introduced a new digital processing camera, the HC-D57 / HC-D57W, which employs a new 12-bit digital processing IC. Compatible with the TA/BS-45 triax system, the HC-D57 / HC-D57W maintains flexibility for studio and field productions. This professional camera offers both broadcast grade picture quality and studio system expansion. General

conversion is employed (internally up to 30bit conversion). All the process after pre-knee is digitized, providing stable and hi-quality pictures. Processes such as Gamma and DTL signals are performed digitally with up to 30-bit internal quantization, achieving superb picture quality with good S/N in actual operation. AIT Lower Smear-CCD (HC-D57W) The HC-D57 employs high-performance 2/3" IT CCD with 410,000 pixels(NTSC) / 470,000 pixels(PAL). The HC-D57W employs 2/3" AIT CCDs with 520,000 pixels(NTSC) / 600,000 pixels(PAL). The AIT CCD sensor has less smear characteristics. It guarantees closer performance to FIT chip. F11 Sensitivity The sensitivity of F11 at 2000lux is realized. A greater depth-of-field facilitates simple focusing. Also vivid images can be acquired even when the camera is used under low light condition. Normal Black Stretch On (7%) DTL function Various DTL functions are incorporated such as Diagonal DTL, Soft DTL and Skin DTL. Back-Light Compensation The back light compensation function is incorporated in Auto-Iris mode. It guarantees proper operation of the iris even in case of high contrast situation. Black Stretch The Black Stretch function improves the luminance reproduction shadow areas of the scene by raising the video level only for low-brightness portion. The stretch level is variable in 3%, 5% and 7% Features Digital-Specific Versatile Videography

+36dB Gain up 36dB of gain allows for minimum illumination of 0.5 lux at F1.4. Because enhanced sensitivity is achived electronically, loss of the resolution is minimized. Supports Various Video Output Signals The HC-D57/D57W can output composite video, Y/C, component, and RGB signals. Memory Card (HC-D57W) The HC-D57W incorporates memory card slot so that camera operating status can be stored into Smart Media memory card. Thus, camera setup, color matching and identical DTL setting for several cameras have been greatly simplified. Shutter function In addition to six preset shutters (1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000), The camera incorporates variable shutter function that can be set from 1/60.3 to 1/201 sec (NTSC) or 1/50.3 to1/200 sec (PAL) variably. Menu Switch Shutter speed and Super-V can be set with a menu switch located on the switch panel. Various camera settings can be made on screen in a menu-driven manner, thereby substantially improving ease of operation. VF character button By pressing VF character button on the right side of HC-D57 / HC-D57W, various camera conditions are displayed by character display in viewfinder instantly. The VF character button and Menu rotary encoder facilities navigation of the camera menu for setting various camera. Initialize SW Selection of INITIALIZE in MENU mode sets the camera to the at the factory setting (condition when delivered) Shoulder Pad A Non-slip material is used for the shoulder pad. Pad position can readily be adjusted to the front and rear as left and right side. High-Resolution Viewfinder The HC-D57/ HC-D57W comes standard with a 1.5-inch high-resolution viewfinder that delivers a horizontal resolution of 600TV lines. This ensures clarity and consistently high image quality. Various accessories Various accessories for HC-series cameras can be used.

existing TA/BS/OCP-40. Remote control and high-res video transmission can be implemented. And also, a newly developed triax system (TA/BS/OCP- 45) is now available. Moreover, because a 5-inch or 6- inch VF can be mounted, the HC-D57/D57W can be configured as a studio camera. Combination with various dockable VTR The HC-D57 / HC-D57W can be directly docked with various VTRs such as DVCAM, Betacam SP and DVC Pro etc. TA-45 ¡Equipped with a pivoting type TRIAX connector. ¡INCOM facilities. ¡Q-TV output available as an option. BS-45 ¡Compact Size(4U half-rack size) and lightweight(13.2 lbs) ¡SDI(D1) output and Q-TV(max. 300m with 8.8mm diameter TRIAX cable) available as options. ¡DC operation available as an option. Control Panel ¡Three types of control panels available; (1) OCP-45 ¡Joystick operational remote control for HL- 45/45W and BS-45. ¡Various set-up controls available by the remote function of the camera menu. (2) RM-45 ¡Compact control panel equipped with basic operating controls. ¡Can be attached to the front of the BS-45. (3) RCP-50 ¡Full control of camera functionality. ¡Can be attached to the front of the BS-45. Main Features of New Triax System With Triax Adaptor (TA-45) With Betacam SP VCR (BVV-5) With DVCAM VCR (DSR-1) With DVCPRO50 VCR(IR-D90/AJ-D90) Quest for Further Improvement in Operability

OCP-45 Remote Control Box RCP-50 Remote Control Panel RM-45 Remote Control Box RM-11 Camera Control Unit MA-400 5-inch Viewfinder VF5045W 1.5-inch Viewfinder VF15-46 for DVCAM VCR (DSR-1) for Betacam SP VCR (PVV-3) VA-39P for DVCPRO VCR (IR-D90/AJ-D90) VA-39A VCR Adaptor Kit BS-45 (with RCP-50) BS-45 (with RM-45+RMP-45) Triax System Specifications Accessories TA-45 MIC Input Q-TV Out Incom Max. Transmission Distance Power Consumption Weight Dimensions BS-45 Genlock In Q-TV In Composite Video Out Component Video Out RGB Video Out SDI Out Intercom MIC Output Power Power Consumption Dimensions Weight OCP-45 Power Consumption Dimensions Weight 1ch (ch-2: option) 1ch BNC 1.0Vp-p 75Ω (Option) 1ch XLR or 110 type 600m (8.8mm diameter TRIAX cable) *Q-TV : 300mm 7W approx. 2.2kg approx. (4.85 lbs) W110 x H233 x D180mm (4.33 x 9.17 x 7.09 inches) BNC (loop through) VBS/BB 1ch BNC(loop through) VBS 2ch BNC 1.0Vp-p 75Ω 1ch each 75Ω 1ch each BNC 0.7Vp-p 75Ω 2ch BNC 0.8Vp-p 75Ω (Option) 1ch XLR or 110 type 1ch XLR 3pin AC or DC12V 95W W212 x H155 x D291mm (8.35 x 6.10 x 11.46 inches) 6kg approx. (13.23 lbs) 5W approx. W92.2 x H343 x D107.2mm (3.63 x 13.50 x 4.22 inches) 2kg approx. (4.41 lbs)

2/3" IT 3-CCD 2/3" AIT CCD NTSC : 768Hx494V, approx 380,000 NTSC : 948Hx485V, approx 460,000 pixels PAL : 752Hx582V, approx 440,000 pixels PAL : 936Hx575V, approx 540,000 pixels NTSC : 811Hx508V, approx 410,000 pixels NTSC : 1020Hx505V, approx 520,000 pixels PAL : 795Hx596V, approx 470,000 pixels PAL : 1008Hx591V, approx 600,000 pixels NTSC : 2:1 interlace 525TVL 60 fields/30 frame/sec PAL : 2:1 interlace 625TVL 50 fields/25 frame/sec Internal / External (Genlock) 2/3" B4 Bayonet mount 3200K, 5600K+1/16 ND , 5600K, 5600K+1/64 ND Standard F11 at 2000 lux (3200K) Minimum 0.5 lux at F1.4 (+36dB) 800TVL or better at center 750TVL or better at center (4:3/16:9) Standard : 400TVL (NTSC) / 450TVL (PAL) Super-V mode : 480TVL (NTSC) / 570TVL (PAL) NTSC : 63dB PAL : 61dB NTSC : 64dB PAL : 62dB Preset mode : 1/100 ,1/120,1/250,1/500,1/1000,1/2000 Variable mode : NTSC : 1/60.3 to 1/201 sec / PAL : 1/50.3 to 1/200 sec Less than 0.05% In all Zones 4:3 4:3 /16:9 switchable (from MENU) Auto White Balance , Auto Black Balance ,Auto Iris, Auto Shading, Auto Knee -3,0,6,9,12,18,30,36dB External Signal : VBS 1.0p-p 75 Ω BBS 0.45 Vp-p 75 Ω Return Signal : VBS 1.0 Vp-p 75 Ω Microphone : -60dB Balanced, Hi impedance Video signal : 1.0 p-p ,75 Ω Y/C signal : Y 1.0Vp-p 75 Ω C 0.286Vp-p75 Ω Component : Y 1.0V p-p 75 Ω : PB/PR 0.525Vp-p 75 Ω (Betacam SP , MII) RGB : 0.7Vp-p 75 Ω Audio : -20dBm/-60dBm 600 Ω DC+11V to +16V approx.15W (w/o VF) approx. 2.5W (VF15-46) -10 ºC to +40 ºC Approx. 2.6 kg (excluding VF , lens ,Mic) W126xH281xD170 (mm) / W4.96xH11.06xD6.69 (inch) Specifications