Infrant Technologies ReadyNAS 600B Installation Manual

Important instruction on how to install hard disks in your ReadyNAS READYNAS 600 version B the components side the connector end ☼Prepare for Installation 2 Install the hard disk mounting brackets 1 Remove the top cover to access disk cage ReadyNAS 600 case (version B) Remove the 3 screws in back. Remove top cover Disk installation Accessories Install the bracket to the new hard disk Prepare SATA hard disk drives
  the Components Side F 4 x 16 x F Read this Guide before you install the disks. Prepare the follows for the disk installation: ReadyNAS 600 disk-less system Disk drive brackets and screw in accessory box Ethernet cable and power cable Hard disk drives (not included) Screw driver (not included)

Refer to the Getting Started Guide for further instruction. 3 Install the hard disks into cage Infrant Technologies Inc. 3065 Skyway Ct., Fremont CA 94539 Phone: (510)4 38-7982 Email: [email protected] Web: www.infrant.com © 2005 Infrant Technologies, Inc. All rights reserved. ReadyNAS, RAIDar, RAIDiator, X-RAID and FrontView are trademarks of Infrant Technologies, Inc. All other product names are the properties of their respective owner. Printed in U.S.A. P/N: IT-05-1-1066-U-01 10/2005 Hard disks with mounting bracket installed System case with easy access disk cage 1) Install the disks into the cage. 2) Push the drives into SATA connector completely, and secure the drives with screws. Re-install top cover and screw on in the back. Done with disk installation. 4 3 2 1 4 3 2 1