Insignia NS-42E470A13A Quick Setup Manual

PB PR L R Y / VIDEO PB PR L R Y / VIDEO PB PR L R Video COMPONENT OUT AUDIO/VIDEO OUT Note: Cable is not provided. Note: Cables are not provided. Connect the yellow connector to the green Y/VIDEO jack. Note: Cable is not provided. Front features Installing the stand 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Hook the slot in the base onto the tab on the stand column (A), then push the base into place (B). 3 Secure the base to the stand column with the four short screws (provided). Installing a wall-mount bracket 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Remove the four screws that secure the stand column to the TV screen, then remove the stand. 3 Secure the stand cover to the back of the TV screen using the four screws you just removed. 4 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions that came with the wall-mount bracket for information about how to correctly hang your TV. Connecting a DVD or Blu-ray player, cable box, satellite receiver, camcorder, or game station Using an HDMI cable (best) Using component cables (better) Using a composite cable (good) Connecting to an antenna/cable wall jack Connect a coaxial cable (not included) to the ANT/CABLE IN jack on the back of your TV and to the Antenna/Cable wall jack. 42" 1080p LED HDTV QUICK SETUP GUIDE NS-42E470A13A Thank You for purchasing this fne Insignia television. We hope you enjoy the quality and reliability of this product for years to come. _______________________________ Remote control and 2 AAA batteries Remote control sensor Power indicator TV stand CABLE Note: Cable is not provided. WE ARE GOING GREEN! A copy of your User Guide is not provided in the box but is available online. Go to www.insigniaproducts.com, click Support & Service, enter your model number in the Product Search feld, then click Search. Stand cover Power cord Identifying cables Your TV has several connection types for connecting devices. For the best video quality, connect a device to the best available connection. You can use the HDMI 1/DVI jack to connect a DVI device to your TV. You need to attach an HDMI-to-DVI adapter to the end of the HDMI cable that connects to the DVI device’s jack. Connection type Video quality Cable connector HDMI video/audio Best Component video and analog audio Better Good OR OR This apparatus is intended to be supported by a UL Listed wall mount bracket. Warning Composite video and analog audio M4 (12 mm) screws (4) A B

PB PR L R Programming your remote control To program a universal remote control to work with your new Insignia TV, see the table for common codes. If you have problems programming your remote or need a diferent remote control code, visit www.insigniaproducts.com/remotecodes for the latest remote control code information. Universal remote TV codes 42" 1080p LED HDTV I QUICK SETUP GUIDE I NS-42E470A13A Antenna or cable TV (no box) Blu-ray player/DVD player/VCR Cable or satellite TV box AV receiver Game console or camera USB fash drive Computer OPTICAL AUDIO IN Universal remote TV codes Universal remote controls Cable/Satellite/Set-top boxes One for All Philips RCA Sony Cablevision Charter Comcast Cox Direct TV Dish Network Time Warner Tivo Verizon 0054 0198, 0490 135 1326, 1463 0198, 0490 400, 450, 461, 456, 10463, 1463, 0463 0091 068, 069, 078, 096, 100, 164, 168, 229, 026 2002, 1204, 1423, 1517, 0171, 1963, 0463, 1463, 0842, 1326, 167, 415, 424, 450, 456, 461, 507, 523, 567, 577, 586 10171, 11204, 11326, 11517, 11564, 11641, 11963, 12002 720 068, 069, 078, 096, 100, 164, 168, 229, 026 10171, 11204, 11326, 11463, 11517, 11641, 11780, 11785, 11892, 11963, 12002 Note: Cable is not provided. Note: Cable is not provided. Connecting a Home Theater System Using digital audio Using analog audio Connecting power Plug the AC power cord into the AC IN jack on the back of your TV, then plug the other end of the cord into a power outlet. ENGLISH 12-0535 Connecting a home theater system with multiple devices One-year limited warranty Visit www.insigniaproducts.com for details. Need additional help? See your Online User Guide! This comprehensive guide includes everything from basic how-to steps to more advanced features. A copy of your User Guide is not provided in the box but is available online. Go to www.insigniaproducts.com, click Support & Service, enter your model number in the Product Search feld, then click Search. Check out our online community forum at www.insigniaproducts.com for helpful information from other Insignia TV owners. We’re here for you www.insigniaproducts.com For customer service, call: 877-467-4289 (U.S./Canada markets) Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfeld, MN USA 55423-3645 © 2012 BBY Solutions, Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners. WE ARE GOING GREEN! A copy of your User Guide is not provided in the box but is available online. Go to www.insigniaproducts.com, click Support & Service, enter your model number in the Product Search feld, then click Search. OK ENTER MENU EXIT Picture Picture Mode Brightness Contrast Color Advanced Video Reset Picture Settings Energy Savings 46 50 75 MOVE EXIT PREVIOUS SELECT Adjust settings to affect picture quality Setting up and using your remote control 1 Press the release button on the back of the remote control to remove the battery compartment cover. 2 Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries match the + and – symbols in the battery compartment. 3 Replace the cover. RECALL Returns to the previous channel. Arrows Navigate in on-screen menus. HOME Opens the on-screen menu. INFO* Opens a TV status banner. CCD Turns closed captioning on or of. FAVORITE Opens the Favorite Channel List. MUTE Mutes the sound. Channel Changes the TV channels. PICTURE Selects the video mode. MTS/SAP Cycles through mono, stereo, and secondary audio for analog programs. AUDIO Selects the audio mode. Power Turns your TV on or of. Numbers Enter channel numbers. . Enters a digital sub-channel number (e.g. 4.1). ENTER Confrms selections or changes. MENU Opens the on-screen menu. EXIT Closes the on-screen menu. INPUT Opens the Input Source list. CH-LIST Opens the channel list. Volume Changes the volume. SLEEP Sets the sleep timer. ZOOM Changes how the picture displays on the screen. INlink Controls Controls HDMI-CEC devices connected to your TV. Normal: Displays the original 4:3 aspect ratio with vertical black bars on the left and right hand side of the screen. Zoom: Expands the image to fll the screen. The top and bottom of the image may be cropped. Wide: Use this option to view content recorded in a 16:9 (wide-screen) aspect ratio. Cinema: Stretches the image at the edges, but keeps a clear image in the center. Auto: Automatically adjusts the image based on the screen size and the TV program. Note: Auto is only available when Auto Zoom in the CHANNELS menu is set to On. Aspect ratio options We recommend that you connect the AV receiver’s HDMI OUT jack to your TV’s HDMI 2 (ARC) jack. In the following situations, the HDMI cable routes Dolby Digital audio to the AV receiver, so you do not need to connect a separate digital audio cable: • When you have a game console connected to one of your TV’s HDMI jacks. • When you watch a program through an antenna or cable TV connected to the ANT/CABLE jack. Quick Launch Inputs Selects another video source connected to your TV. PICTURE CHANNELS SETTINGS PHOTOS AUDIO INPUT SOURCE TV AV Component VGA USB HDMI1 HDMI2 HDMI3 Turning on your TV for the frst time 1 Connect your TV’s power cord to a power outlet, then press (power). The Choose Your Menu Language screen opens. Press ▲ or ▼ to highlight a language, then press ENTER. 2 Press ◄ or ► to select Auto or Manual, then press ENTER. If you select Auto, the date and time are set automatically from a digital TV signal. If you select Manual, you can manually set the date and time. Press ENTER. 3 Press ▲ or ▼ to highlight Home Mode or Retail Mode, then press ENTER. If you select Retail Mode, a message asks you to confrm your selection. Select Yes or No. Retail mode is not an energy-saving mode. 4 Press ▲ or ▼ to highlight Antenna, Cable, or Satellite Box, then press ENTER. A. If you select Antenna, your TV scans for available channels. The scan may take several minutes. B. If you select Cable, a message asks if you have a cable box. • Select No if no cable box is connected. Your TV scans for available channels. The scan may take several minutes. • Select Yes if a cable box is connected. A message asks how you connected the cable box to your TV: • Select AV, Component, or HDMI if you connected a cable box to your TV using one of these cables. Read the message, then press ENTER to close the wizard. • Select Coaxial if you connected a cable box to your TV using a coaxial cable. Read the message, then press ENTER to start the channel scan (VHF channels only). C. If you select Satellite Box, a message asks how you connected the satellite box to your TV: • Select AV, Component, or HDMI if you connected a satellite box to your TV using one of these cables. Read the message, then press ENTER to close the wizard. • Select Coaxial if you connected a satellite box to your TV using a coaxial cable. Read the message, then press ENTER to start the channel scan (VHF channels only). OK ENTER MENU EXIT MOVE EXIT PREVIOUS SELECT Select if you have a satellite box. Antenna Cable Satellite Box OK ENTER MENU EXIT MOVE EXIT PREVIOUS SELECT Select if you have cable service. Antenna Cable Satellite Box Choose Your TV Source OK ENTER MENU EXIT MOVE EXIT PREVIOUS SELECT Select Antenna if using an antenna for standard or HD TV. Antenna Cable Satellite Box Choose Your TV Source OK ENTER MENU EXIT MOVE EXIT PREVIOUS SELECT Reduces total power consumption. Home Mode Retail Mode Choose Your Picture Mode OK ENTER MENU EXIT If Automatic, options are automatically set by TV source. MOVE EXIT PREVIOUS SELECT Mode Time Zone Daylight Savings Year Month Day Time Choose Your Time Setting Manual Pacific On 2011 Jan 1 12:25 AM OK ENTER MENU EXIT MOVE EXIT PREVIOUS SELECT Set menu language to English, Français, or Español. English Français Español Choose Your Menu Language 3 5A 5B 5C 2 4 OK ENTER MENU EXIT MOVE EXIT PREVIOUS SELECT Select if using an antenna for standard or HD TV. Channel scan may take 20+ minutes. Scanning for Channels Digital Channels 0 Analog Channels 0 OK ENTER MENU EXIT MOVE EXIT PREVIOUS SELECT Yes Do you have a Cable Box? Yes No OK ENTER MENU EXIT MOVE EXIT PREVIOUS SELECT Coaxial AV, Component, or HDMI How did you connect the cable box to the TV? OK ENTER MENU EXIT MOVE EXIT PREVIOUS SELECT Coaxial AV, Component, or HDMI How did you connect the satellite box to the TV? Choose Your TV Source