Inter-m PP-6214 Operation Manual

and the Caribbean) do not have handles installed due to customer preference.

Features............................................................................................................................................3 Accessories.....................................................................................................................................3 Operation ........................................................................................................................................3 Front Panel ......................................................................................................................................4 Rear Panel .......................................................................................................................................6 Applications ....................................................................................................................................8 Block Diagram ................................................................................................................................9 Specifications ................................................................................................................................10 Service Procedures....................................................................................................................................11 Schematic.....................................................................................................................................11 Parts List .......................................................................................................................................11 Variations and Options ...............................................................................................................11 Warranty .......................................................................................................................................11

All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value and we are delighted you have purchased one of our products. We sincerely trust this product will provide years of satisfactory service, but if anything is not to your comple satisfaction, we will endeavor to make things right. Welcome to Inter-M, and thank you for becoming part of our worldwide extended family! RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. *Do not install this equipment in a confined space such as a book case or similar unit. *The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such vases, shall be placed on the apparatus. *Worded: “WARNING FOR YOUR PROTECTION PLEASE READ THE FOLLOWING-WATER AND MOISTURE: Unit should not be used near water(e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken so than objects do not fall and liquids are not spilled into the enclosure through openings.” This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying the appliance. Caution: To prevent electric shock do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. Attentions: Pour prévenir les chocs électriques ne pas utiliser cette fiche polarisée avec un prolongateur, une prise de courant on une autre sortie de courant, sauf si les lames peuvent étre insérées à fond sans en laisser aucune partie à découvert.

read this brief manual and familiarize yourself with the important information regarding product features, setup and operation. As with most electronic devices, we strongly recommend you retain the original packaging. In the unlikely even the product must be returned for servicing, the original packaging (or reasonable equivalent) is required. Installation Installation Environment Never place this product in an environment which could alter its performance or reduce its service life. Suc environments usually include high levels of heat, dust, moisture, and vibration. Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blade with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wi blade or the third prong are provided for your safety. If the provided plug does not ft into your outlet, con an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specifed by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specifed by the manufacturer, or sold with the apparatu When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualifed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. S3125A S3125A

Flexible mix architecture in a space-saving two RU package. - TWELVE INPUTS AND TWO OUTPUTS Eight mono inputs and two stereo inputs, plus a stereo output. - INPUT AND OUTPUT METERING Peak meters on input channels, plus multi-segment LED metering to monitor your output signal. - THREE-BAND EQ Three-Band EQ control on output section - ON-BOARD PHANTOM POWER Built-in +18VDC phantom power for condenser microphones - AC OR DC OPERATION Runs on 100-120VAC, 220-240VAC, or 24VDC for true portability. Accessories One detachable AC power cord is provided for use with this product. Operation Operation Make certain that speakers and input sources are properly connected before switching on. Keep volume levels turned down before switching on. NOTE: The system’s operation is delayed by approximately three seconds after pressing the power switch. This is due to the built-in protection circuitry, designed to protect speakers and other system components.

These knobs provide continuous control of the gain level for the associated input channel. 2. PEAK INDICATORS 1-8 These LED indicators light when the input signal to the associated channel is 3dB below clipping. If th indicator is lit steadily, reduce the channel’s Trim level (1) to avoid distortion. 3. GAIN SELECT SWITCHES 9/10 – 11/12 These switches select the input gain level for Stereo Channels 9/10 and 11/12. You may select between +4dB, -10dB or –20dB input level, depending on your input source. If the signal is too weak (very low level select a higher setting; if the signal is too hot (overloaded and distorted), select a lower setting. 4. EQ CONTROLS These knobs provide continuous control of equalization for the stereo (master) output. Three bands o equalization are provided: Low: 80Hz, ±12dB, Shelving Mid: 800Hz ±12dB, Shelving High: 8kHz ±12dB, Shelving 5. MAIN OUTPUT LEVEL CONTROLS These sliders provide control of the stereo (master) output level. The output level may be monitored by the Output Level Meters (6). 6. OUTPUT LEVEL METERS These fve-segment LED meters monitor the level of the stereo (master) output signal. 12 12 12 12 12 12 8KHz 800Hz 80Hz 10 0 10 0 60 16 TRIM PEAK 2 1 L E N N A H C L E N N A H C L E N N A H C L E N N A H C L E N N A H C L E N N A H C L E N N A H C L E N N A H C PRIORITY 10 0 PEAK 10 0 PEAK 10 0 PEAK 10 0 PEA 10 0 PEAK 10 0 PEAK 10 0 PEAK 10 0 1 0 0 4dB 10dB 20dB 4dB 10dB 20dB 12 12 12 12 12 12 8KHz 800Hz 80Hz EQ 1 2 10 0 10dB PRE AMPLIFIER PP 9214 2 1 POWER OFF ON 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 TRIM 60 16 30 14 60 16 30 14 60 16 30 14 60 16 30 14 60 16 30 14 60 16 30 14 60 16 30 14 TRIM 6 1 3 1 TRIM TRIM TRIM TRIM TRIM 1 2 MAIN CHANNEL 10 CHANNEL 12 1 0 1 9 8 11 3 7 6 5 4 2

Pressing this switch activates the +18VDC phantom power supply to the Mic Inputs 1-8, for use wit condenser mics requiring external power. When Phantom Power is active, the LED indicator lights. Push this switch again to turn of Phantom Power. 8. CHANNEL SELECTOR SWITCHES 1-8 These buttons assign the channel’s input signal to one or both of the stereo outputs. 9. CHANNEL OUTPUT LEVELS 1-8 These knobs provide continuous control of the associated channel’s output level. 10. PRIORITY LEVEL CONTROL This knob provides continuous control of the volume of the input signal of the chime, siren, or other au source connected to the Priority Input jacks on the rear panel. When signal is present at the Priority Inp jacks, all other signals except Channel 1 are muted. 11. POWER SWITCH Pressing this switch turns the unit on, as indicated by the Power LED in the switch. Pressing it again turns the unit of.

This holder contains the AC overload protection fuse. If the fuse has blown out, replace it with a fuse of same type and rating. If the fuse continues to blow, refer servicing to a qualifed service technician. 2. INSERTS These unbalanced 1/4” TRS jacks are provided for input of an audio source before the master fader. The input signal is unafected by the Channel Input levels. 3. LINE INPUTS 9-12 Line-level inputs on unbalanced RCA and 1/4” phone connectors. These are provided as two sets of stereo inputs (9/10 and 11/12). 4. REC OUTPUT These two unbalanced 1/4” line-level inputs are provided for connecting to an external recording device. 5. PRIORITY INPUT These two unbalanced 1/4” line-level inputs are provided for priority connection of chime/siren equipment. When input signal is present on these inputs, all other audio inputs except Channel 1 are automatically muted. 6. MUTE SWITCH When this switch is pressed, priority muting is activated, and all signals except Channel 1 and Priority Inpu are muted. 7. AC POWER INPUT Connect the supplied standard AC input cable here. DC INPUT 24V LINE INSERT INSERT REC OUTPUT PRIORITY INPUT MIC MIC MIC MIC MIC MIC MIC MIC CH 2 OUTPUT OUTPUT MUTE ON OFF LINE LINE LINE LINE LINE LINE CH 5 CH 4 CH 3 CH 2 CH 1 CH 8 CH 7 CH 6 CH 1 CH 12 CH 10 CH 11 CH 9 FUSE T400mAL/250V ~ AC INPUT 230V 50Hz S N 6 5 4 3 2 1 0 1 9 8 7 11

These are balanced XLR output jacks for connecting to the input of a power amp. 9. DC INPUT TERMINALS These terminals are provided for the connection of backup battery. Connect a 24VDC battery source to these terminals. Make certain the red terminal is connected to the battery’s positive (+) side, and the black termin to the battery’s negative (–) side. 10. MIC INPUTS 1-8 Mic-level inputs on balanced three-pin XLR connectors. 11. LINE INPUTS 2-8 Line-level inputs on balanced 1/4” phone connectors.

REMOTE C-SW-H GND ( ) ( ) S N SWED 3 (2000W) SWED 2 (2000W) SWED 1 (2000W) SWITCHED DC OUT 24V 5A MAX ( ) ( ) SWITCHED DC OUT 24V (RACK ONLY) (AMP ONLY) AC INPUT 230V/50Hz,217VA ~ www.inter-m.com UNSWED (700W) DC INPUT 24V FUSE T315mAL / 250V UNBAL / 75Ω LOOP ANT. L R STEREO MONO(BAL) MONO(BAL) VARIABLE FIXED S N www.inter-m.com OUTPUT ANT ~AC INPUT 120V 60Hz, 11W RESET FM AM DIGI-LINK PB-9207A AC INPUT : 220V 50Hz, 139VA FUSE : 1A / 250V ~ BATTERY IN ( ) ( ) N S PE-9103A PP-6214 DC INPUT 24V LINE INSERT INSERT REC OUTPUT PRIORITY INPUT MIC MIC MIC MIC MIC MIC MIC MIC CH 2 OUTPUT OUTPUT MUTE ON OFF LINE LINE LINE LINE LINE LINE CH 5 CH 4 CH 3 CH 2 CH 1 CH 8 CH 7 CH 6 CH 1 CH 12 CH 10 CH 11 CH 9 PD-9359E S N AC INPUT BATTERY (DC 24V) PT-9107SD PC-9335 PA-9312 PA-9324 MIC CD-3500 MODEL NO. PE-9103A MADE IN KOREA CHIME/SIREN NO USER SERVICEABLE PARTS INSIDE. RISQUE DE CHOC ELECTRIQUE NE CTRIC SHOCK, DO NOT REMOVE COVER. REFER SERVICING TO QUALIFIED SERVICE CAUTION; AVIS; TO REDUCE THE RISK OF ELE- PERSONNEL. PAS OUVRIR. DC INPUT 24V S N 2 TONE WEST MINSTE OUTPUT REMOTE CHIME AC INPUT 230V 50Hz, 217VA BATTERY INPUT 24V

20Hz-20kHz T.H.D.......................................................................................................................... ...........Less than 0.5% Input Sensitivity/Impedance Mic Input 1-8 ..........................................................................................................-60dB/60 0ΩBalanced Line Input 2-8 ..........................................................................................................-30dB/1 0kΩBalanced Line Inputs 9-12..............................................................................+4dB, -10dB, -20dB/10k ΩUnbalanced Output/Impedance Ch 1-2 (Master)........................................................................................................+4dB/600 ΩBalanced Rec Out ..............................................................................................................-10dB/10k ΩUnbalanced Insert......................................................................................................................0dB /10k ΩUnbalanced Residual Noise All Faders Min................................................................................................................. ..................90dB All Faders Min, Master Fader Max............................................................................................... .......70dB Crosstalk Input to Output ................................................................................................................ ..................70dB Adjacent....................................................................................................................... ....................70dB - GENERAL Power Source.............................................100–120VAC or 220–240VAC; 50/60Hz, 24VDC Auto-Switching .............................................................. (Supplied AC mains transformer depends on country requirements) Power Consumption .............................................................................................................. ...............9.8W Weight......................................................................................................................... .........12.8kg/34.3lb Dimensions................................................................482(W) x 88(H) x 280(D)mm/19(W) x 3.5(H) x 11(D)in * Specifcations and design subject to change without notice.

provided in the troubleshooting portion of this manual may help with this process. Once it is certain that problem is related to the product contact your warranty provider as described in the warranty section of th manual. Schematic A Schematic is available by contacting your warranty provider. Parts List A Parts List is available by contacting your warranty provider. Variations and Options Variations and Options Variations Products supplied through legitimate sources are compatible with local AC power requirements. Options No optional items are available for this product. Wa rranty Wa rranty Warranty terms and conditions vary by country and may not be the same for all products. Terms and condition of warranty for a given product may be determined frst by locating the appropriate country which the produ was purchased in, then by locating the product type. To obtain specifc warranty information and available service locations contact Inter-M directly(in Korea or the USA) or the authorized Inter-M Distributor for your specifc country or region.