Intermec CK30 Installation Manual

Corporate Headquarters 6001 36th Ave. W. Everett, WA 98203 U.S.A. www.intermec.com The information contained herein is proprietary and is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without w ...

MobileLAN™ access WA22 and MobileLAN power bridge Collects data from your wireless CK30s and sends it to your EasyADC PC through your Ethernet network. Powered over Ethernet by the MobileLAN power bridge. To Your Network EasyCoder® PM4i Prints custom bar code labels you design with LabelShop PRO software. EasyADC PC Manages the dat ...

materials you may need include:  Ladder to reach the permanent mounting location for the WA22  Six mounting screws for the WA22 mounting bracket if you wish to use it. Type and size of the screws depends on the materials at the installation location.  Drill and bit  ...

 CK30 computer  Rechargeable AB1 battery  Packet including documentation and labels For a complete list of the packet contents, see the CK30 Handheld Computer Quick Start Guide in the packet. Accessories box Includes the accessories specific to your EasyADC System components. For a complete list, see the EasyADC Access ...

If you are not using the mounting bracket, continue with Step 8. To use the mounting bracket, continue with Step 4. Insert one shoulder screw into each of the four brass inserts and tighten them securely. Using the bracket as a template, mar ...

the power bridge. Connect an Ethernet cable from the Data In port on the power bridge to a port on an Ethernet hub or switch connected to your LAN. Connect the A ...

Insert the EasyADC CD into the CD drive on your designated EasyADC PC. This is the same PC that is currently running the Microsoft Great Plains Client. The installation begins and you are prompted to install components of the Microsoft .NET Compact Framework. Follow the onscreen instructions to install .NET com ...

selected and then click Next. Additional installations begin and a DOS window appears. When this part of the installation is complete, a setup complete message appears. Click Open. Progress screens appear showing you the status of the installation. When this part is done, the S ...

Wavelink Avalanche. Follow the onscreen instructions to install Avalanche and accept default settings. A message appears asking if you want to add a desktop shortcut. Click No. A dialog box appears asking if you want to launch Avalanche Enabler. Do not choose this option. The install ...