Intermec 751G Instructions

from dust, dirt, and rain. The clear material of the dust cover allows you to use the touch screen and the keypad with the dust cover installed. You cannot install a dust cover if you are using a serial adapter, CAC reader, or holster accessory. To install the dust cover 1 If you have a CK31G, CN2, or 751G, remove the serial port cover. 2 Insert the top of the CK31, CK31G, CN2, 751G, or CK61G into the dust cover. 3 Pull the dust cover over the bottom of the handheld computer. Installing the Dust Cover: Each Intermec computer has a unique dust cover made specifically for it. This illustration shows the CK31 with a 52-key keypad dust cover for reference. Note: Remove the dust cover before inserting your computer into a charging or communications dock. Dust Cover Instructions A B

Installing the Serial Port Cover Note: On the CK61G you may also need to insert the head phone plug into the jack as shown in the following illustration. Dust cover Dust cover Dust cover CK31 serial port cover (CK31G only) CN2 serial port cover 751G serial port cover

*074130-003* P/N 074130-003 Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2007 Intermec Technologies Corporation. All rights reserved.