Jensen VM9125 Installation Manual
Text of the manual
What’s in the Box
VM9125 Head Unit
Left and Right Double DIN
Mounting Brackets
Double DIN Half Sleeve Install
Bracket
Two Custom Cosmetic Trim Rings
Parking Brake Wire
Hardware Bag
Speaker Output Harness
Power Input Harness
Accessory Harness
Installation Guide
Tools and Supplies
You will need these tools and supplies
to install your VM9125:
• Tor
• Rear Camera
Disconnecting the Battery
• To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery cable prior to
installation.
NOTE: If the VM9125 is to be installed in a car equipped with an on-board drive or navigation computer, do not
disconnect the battery cable. If the cable is disconnec
Installation Using Half-Sleeve
1. Install half-sleeve in the dashboard.
a. Install adapter if necessary (optional).
b. Install half-sleeve into adapter or dashboard (use only
the supplied screws). Do not force the sleeve into the
opening or cause it to bend or bow.
WARNING! Only connect the unit to a 12-volt power
supply with proper grounding.
c.
CAUTION! IMPORTANT: Incorrect wiring connections can damage the unit. Follow the wiring instructions carefully,
or have the installation handled by an experienced technician.
Need Help? For technical assistance, call the Jensen customer support line at 1-800-323-4815.
GPS
DVB-T
GR E E N(+)
GR E E N/BLACK(-)
WHITE (+)
WHITE /BLACK(-)
GR E Y(+)
