JVC KD-DV7306 Instructions Manual

For installation and connections, refer to the separate manual. INSTRUCTIONS GET0449-005A [A] KD-DV7306/KD-DV7305 DVD/CD RECEIVER Cover_KD-DV7306_005A_f.indd 1 Cover_KD-DV7306_005A_f.indd 1 2/6/07 12:14:59 PM 2/6/07 12:14:59 PM

The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended. Caution on volume setting Discs and the connected USB devices produce very little noise compared with other sources. Lower the volume before playing to avoid damaging the speakers by the sudden increase of the output level. Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments. 4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. [European Union only] EN02-07_DV7306_005A_f.indd 2 EN02-07_DV7306_005A_f.indd 2 2/9/07 1:48:41 PM 2/9/07 1:48:41 PM

• DO NOT install any unit in locations where; – it may obstruct the steering wheel and gearshift lever operations. – it may obstruct the operation of safety devices such as air bags. – it may obstruct visibility. • DO NOT operate the unit while driving. • If you need to operate the unit while driving, be sure to look ahead carefully. • The driver must not watch the monitor while driving. If the parking brake is not engaged, “DRIVER MUST NOT WATCH THE MONITOR WHILE DRIVING.” appears on the monitor, and no playback picture will be shown. – This warning appears only when the parking brake wire is connected to the parking brake system built in the car (refer to the Installation/Connection Manual). How to reset your unit • Your preset adjustments will also be erased (except the registered Bluetooth device, see page 29). How to forcibly eject a disc “PLEASE” and “EJECT” appear alternately on the display. • Be careful not to drop the disc when it ejects. • If this does not work, reset your unit. How to use functions mode If you press M MODE, the unit goes into functions mode, then the number buttons (except “1”) and 5/∞ buttons work as different function buttons. [Within 5 seconds...] EN02-07_DV7306_005A_f.indd 3 EN02-07_DV7306_005A_f.indd 3 2/9/07 1:48:44 PM 2/9/07 1:48:44 PM

Attaching the control panel For safety... • Do not raise the volume level too much, as this will block outside sounds, making driving dangerous. • Stop the car before performing any complicated operations. Temperature inside the car... If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit. CAUTION: The lever comes out if you pressed the 0 button while the panel is detached. If this happens, push the lever back into lock position before attaching the panel. Lever Indication language: In this manual, English indications are used for purposes of explanation. You can select the indication language on the monitor on the “LANGUAGE” setting (see page 42). EN02-07_DV7306_005A_f.indd 4 EN02-07_DV7306_005A_f.indd 4 2/9/07 1:48:44 PM 2/9/07 1:48:44 PM

6 Preparation ....................................................................................................... 7 OPERATIONS Basic operations ................................................................................................. 8 • Using the control panel ................................................................................. 8 • Using the remote controller (RM-RK241) ........................................................ 9 Listening to the radio .......................................................................................... 12 Disc operations ................................................................................................... 13 Listening to the USB device .................................................................................. 26 Dual Zone operations .......................................................................................... 28 EXTERNAL DEVICES Using the Bluetooth ® devices .............................................................................. 29 • Using the Bluetooth cellular phone ................................................................ 31 • Using the Bluetooth audio player ................................................................... 33 Listening to the CD changer ................................................................................. 34 Listening to the iPod / D. player ........................................................................... 35 Listening to the other external components .......................................................... 36 SETTINGS Selecting a preset sound mode ............................................................................. 38 General settings — PSM ...................................................................................... 39 Setup menu ........................................................................................................ 42 Bluetooth settings .............................................................................................. 44 Assigning titles ................................................................................................... 45 REFERENCES Maintenance ...................................................................................................... 46 More about this unit ........................................................................................... 47 Troubleshooting ................................................................................................. 53 Specifications ..................................................................................................... 57 EN02-07_DV7306_005A_f.indd 5 EN02-07_DV7306_005A_f.indd 5 2/9/07 1:48:45 PM 2/9/07 1:48:45 PM

Disc type Recording format, file type, etc Playable DVD DVD-Video (Region Code numbers include “4”) *1 DVD-Audio DVD-ROM DVD Recordable/Rewritable (DVD-R *2/-RW, +R/+RW *3) • DVD Video: UDF bridge • DVD-VR: UDF 201 • DivX/MPEG-1/MPEG-2/MP3/ WMA/WAV: Compliant to ISO 9660 level 1, level 2, Romeo, Joliet DVD-Video DVD-VR (non-CPRM only) DivX/MPEG-1/MPEG-2 Video MP3/WMA/WAV DVD+VR JPEG/MPEG4 DVD-RAM All Dual Disc DVD side Non-DVD side CD/VCD Audio CD/CD Text (CD-DA)/DTS-CD *4 VCD (Video CD) CD-ROM CD-I (CD-I Ready) CD Recordable/Rewritable (CD-R/-RW) • Compliant to ISO 9660 level 1, level 2, Romeo, Joliet CD-DA DivX/MPEG-1/MPEG-2 Video MP3/WMA/WAV JPEG/MPEG4 *1 If you insert a DVD Video disc of an incorrect Region Code, “REGION CODE ERROR!” appears on the monitor. *2 DVD-R recorded in multi-border format is also playable (except for dual layer discs). *3 It is possible to play back finalized +R/+RW (Video format only) discs. However, the use of +R double layer disc on this unit is not recommended. *4 To reproduce DTS sound, use the DIGITAL OUT terminal (see also pages 43, 50, and 51). EN02-07_DV7306_005A_f.indd 6 EN02-07_DV7306_005A_f.indd 6 2/9/07 1:48:45 PM 2/9/07 1:48:45 PM

• See also page 40. ~ Turn on the power. Ÿ Enter the PSM settings. ! ] ⁄ Cancel the display demonstrations Select “DEMO,” then “DEMO OFF.” Set the clock Select “CLOCK H” (hour), then adjust the hour. Select “CLOCK M” (minute), then adjust the minute. @ Finish the procedure. When the power is turned off: Check the current clock time When the power is turned on: Change the display information EN02-07_DV7306_005A_f.indd 7 EN02-07_DV7306_005A_f.indd 7 2/9/07 1:48:46 PM 2/9/07 1:48:46 PM

1 Select the source. FM/AM = DISC * = USB = CD-CH */IPOD */ D.PLAYER * (or EXT IN) = BT-PHONE (Bluetooth Phone) * = BT-AUDIO (Bluetooth Audio) * = LINE IN = (back to the beginning) * You cannot select these sources if they are not ready or not connected. 2 • FM/AM: Select the bands. • DISC/USB: Start playback. 3 • Turn on the power. • Turn off the power [Hold]. • Attenuate the sound (if the power is on). • Volume control [Turn]. 4 • Adjust the sound mode. • Enter the PSM settings [Hold]. 5 Display window 6 Select the sound mode. 7 Eject disc. 8 USB (Universal Serial Bus) input terminal 9 Detach the panel. p Change the display information. q Enter functions mode. Press M MODE, then one of the following buttons (within 5 seconds)... MO : Turn on/off monaural reception. SSM : Automatic station presetting [Hold]. DUAL : Activate/deactivate Dual Zone. RPT : Select repeat play. RND : Select random play. 5 / ∞ : Skip 10 chapters/tracks. w • FM/AM: Select preset station. • DISC/USB: Select chapter/title/program/folder/ track/disc (for CD changer). • BT-PHONE: Select preset phone number. e • FM/AM: Search for station. • DISC/USB: Select chapter/track. • IPOD/D.PLAYER: Select track. • BT-PHONE/BT-AUDIO: Select setting item/ Select a registered device. r • FM/AM: Select preset station. • DISC/USB: Select title/program/playlist/folder. • IPOD/D.PLAYER: Enter the main menu/Pause or stop playback/Confirm selection. • BT-PHONE/BT-AUDIO: Pause or start playback/ Enter setting menu/Confirm selection. EN08-15_DV7306_005A_f.indd 8 EN08-15_DV7306_005A_f.indd 8 2/9/07 1:49:04 PM 2/9/07 1:49:04 PM

• Aim the remote controller directly at the remote sensor on the unit. • DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting). Display window Using the remote controller (RM-RK241) Installing the lithium coin battery (CR2025) Continued on the next page Remote sensor 1 Playback source indicators 2 Loudness indicator 3 Track information indicators 4 Sound mode indicators • lights up for the selected item. 5 Tuner reception indicators 6 Playback mode/item indicators (Random/Repeat) 7 Equalizer indicator 8 Bluetooth indicator 9 Dual Zone indicator p Main display (Time, menu, playback information) q Track indicator w Source display/Preset No./Track No./Folder No./ Disc No./Chapter No. e Status of Bluetooth device (Device number, [1 – 5]; signal strength, [0 – 3]*; battery reminder, [0 – 3]*) * As the number increases, the signal/battery strength becomes stronger. EN08-15_DV7306_005A_f.indd 9 EN08-15_DV7306_005A_f.indd 9 2/9/07 1:49:06 PM 2/9/07 1:49:06 PM

• Do not install any battery other than CR2025 or its equivalent. • Do not leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time. • Store the battery in a place where children cannot reach. • Do not recharge, short, disassemble, heat the battery, or dispose of it in a fire. • Do not leave the battery with other metallic materials. • Do not poke the battery with tweezers or similar tools. • Wrap the battery with tape and insulate when throwing away or saving it. IMPORTANT: If Dual Zone is activated (see page 28), the remote controller only functions for operating the DVD/CD player. EXTRA MONITOR 1 Monitor control buttons • Used for a JVC monitor—KV-MR9010, KV-MH6510, KV-M706, or KV-M705. DVD/RECEIVER 2 • Turns the power on if pressed briefly or attenuates the sound when the power is on. • Turns the power off if pressed and held. 3 Selects the source. 4 Selects the FM/AM bands. 5 Not applicable for this unit. 6 Activates or deactivates Dual Zone. 7 Adjusts the volume level. • Also functions as 2nd VOL button when pressed with SHIFT button (see page 28). 8 *1 • DVD-Video/DivX: Shows disc menu. • DVD-VR: Shows the ORIGINAL PROGRAM screen. • VCD: Starts PBC playback. 9 *1 Enters disc setup menu. p SHIFT button q For disc/USB operations: • 7 : Stops playback. • 3 : Starts playback. • 8 : Pauses. For Bluetooth operations: • 7 : Ends the call for phone operations. • 3 : Answers the incoming call for phone operations. • 3 also function as ZOOM button when pressed with SHIFT button (see page 21). • Not applicable for CD changer/iPod/D. player operations. EN08-15_DV7306_005A_f.indd 10 EN08-15_DV7306_005A_f.indd 10 2/9/07 1:49:06 PM 2/9/07 1:49:06 PM

• DVD-VR: Shows the PLAY LIST screen. • VCD: Starts PBC playback. t *1 • Makes selection/settings. • @ / # : DivX/MPEG Video: Searches for index during play. • DISC +/–: Changes discs when the source is “CD-CH.” y *1 RETURN button u • DVD-Video: Selects audio language ( ), subtitles ( )*1, angle ( )*5. • DVD-VR: Selects audio language ( ) and subtitles ( )*1. • DivX: Selects audio language ( ), subtitles ( )*1. • VCD: Selects audio channel ( ). *1 Functions as number buttons when pressed with SHIFT button. – FM/AM: Selects preset stations (1 – 6). – DISC/USB: Selects chapter/title/folder/track after entering search mode by pressing SHIFT and DIRECT. – BT-PHONE: Dials preset phone number (1 – 6). *2 Not applicable for CD changer operations. *3 5 : Returns to the previous menu. ∞ : Confirms the selection. *4 You can directly select title/chapter/program/playlist/ folder/track using the number buttons (see pages 18 – 20). *5 Functions as SURROUND button when pressed with SHIFT button (not applicable for this unit). w For FM/AM tuner operations: • 5 / ∞ : Changes the preset stations. • 4 / ¢ : – Searches for stations automatically if pressed briefly. – Searches for stations manually if pressed and held. For advanced disc/USB operations: • 5 / ∞ : DVD-Video: Selects the titles. DVD-VR: Selects the programs. USB/other discs (except VCD/CD): Selects the folders if included. • 4 / ¢ : – Reverse skip/forward skip if pressed briefly. – Reverse search/forward search if pressed and held. • 1 / ¡ : Reverse search/forward search. *2 For Bluetooth operations: • 4 / ¢ : Reverse skip/forward skip (for audio operation). For Apple iPod/JVC D. player operations: • ∞ : Pauses/stops or resumes playback. 5 : Enters the main menu. (Now 5/∞/4 / ¢ work as the menu selecting buttons.) *3 • 4 / ¢ (in menu selecting mode): – Selects an item if pressed briefly. (Then, press ∞ to confirm the selection.) – Skips 10 items at a time if pressed and held. • 4 / ¢ : – Reverse skip/forward skip if pressed briefly. – Reverse search/forward search if pressed and held. e Shows the on-screen bar. • Also functions as DIRECT button when pressed with SHIFT button. *4 EN08-15_DV7306_005A_f.indd 11 EN08-15_DV7306_005A_f.indd 11 2/14/07 5:53:26 PM 2/14/07 5:53:26 PM

to receive 1 2 Reception improves, but stereo effect will be lost. • MO indicator lights up. FM station automatic presetting — SSM (Strong-station Sequential Memory) You can preset up to six stations for each band. 1 2 Listening to the radio Change the display information ~ Select “FM/AM.” Ÿ Select the bands. ! Search for a station to listen—Auto Search. Manual Search: Hold either one of the buttons until “M” flashes on the display, then press it repeatedly. * If no name is assigned to a station, “NO NAME” appears. To assign a name to a station, see page 45. Select preset station. 3 Local FM stations with the strongest signals are searched and stored automatically in the FM band. Manual presetting Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. 1 2 3 Lights up when receiving an FM stereo broadcast with sufficient signal strength. EN08-15_DV7306_005A_f.indd 12 EN08-15_DV7306_005A_f.indd 12 2/9/07 1:49:08 PM 2/9/07 1:49:08 PM

• Press SRC to listen to another playback source. Prohibiting disc ejection To cancel the prohibition, repeat the same procedure. Disc operations Before performing any operations... Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control the playback by referring to the monitor screen. (See pages 21 – 25.) The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its internal program). If the current disc does not have any disc menu, all tracks will be played repeatedly until you change the source or eject the disc. • See pages 42 and 43 for more settings. If “ ” appears on the monitor when pressing a button, the unit cannot accept the operation you have tried to do. • In some cases, without showing “ ,” operations will not be accepted. Open the control panel and insert the disc. Playback starts automatically. Start playback if necessary. Change the display information. Continued on the next page EN08-15_DV7306_005A_f.indd 13 EN08-15_DV7306_005A_f.indd 13 2/9/07 1:49:09 PM 2/9/07 1:49:09 PM

Elapsed playing time = Clock = Current title and chapter number = (back to the beginning) *1 During stop: Locate title *1 During play/pause: Locate chapter Select title Press: Select chapter Hold: Reverse/fast-forward chapter *2 Elapsed playing time = Clock = Current program (or playlist) number and chapter number = (back to the beginning) *1 During stop: Locate program *1 During play/pause: Locate chapter Select program number/ playlist number Press: Select chapter Hold: Reverse/fast-forward chapter *2 *1 Press to select number 1 to 6; hold to select number 7 to 12. *2 Search speed changes to × 2 ] × 10 on the monitor. EN08-15_DV7306_005A_f.indd 14 EN08-15_DV7306_005A_f.indd 14 2/9/07 1:49:10 PM 2/9/07 1:49:10 PM

= Track title = (back to the beginning) *1 Locate particular folder directly Select folder Press: Select track Hold: Reverse/fast-forward track *2 *1 Press to select number 1 to 6; hold to select number 7 to 12. *2 Search speed changes 1 ] 2 on the monitor. *3 Search speed changes to × 2 ] × 10 on the monitor. Elapsed playing time and Current track number = Clock and Current track number = (back to the beginning) *1 Locate particular track directly (PBC not in use) Press: Select track Hold: Reverse/fast-forward track *3 Continued on the next page EN08-15_DV7306_005A_f.indd 15 EN08-15_DV7306_005A_f.indd 15 2/9/07 1:49:10 PM 2/9/07 1:49:10 PM

= Clock and Current track number = Album name/performer (folder name *2) = Track title (file name *2) = (back to the beginning) *1 Locate particular folder directly Select folder Press: Select track Hold: Reverse/fast-forward track *3 *1 Press to select number 1 to 6; hold to select number 7 to 12. *2 If the file does not have Tag information or “TAG DISP” is set to “TAG OFF” (see page 41), folder name and file name appear. TAG indicator will not light up. *3 Search speed changes to × 2 ] × 10 on the monitor. *4 “NO NAME” appears for an audio CD. Elapsed playing time and Current track number = Clock and Current track number = Disc title/performer *4 = Track title *4 = (back to the beginning) *1 Locate particular track directly Press: Select track Hold: Reverse/fast-forward track *3 EN16-21_DV7306_005A_f.indd 16 EN16-21_DV7306_005A_f.indd 16 2/9/07 1:51:54 PM 2/9/07 1:51:54 PM

Disc type Skip 10 chapters * CHP RPT: Repeat current chapter TIT RPT: Repeat current title — Skip 10 chapters * CHP RPT: Repeat current chapter PRG RPT: Repeat current program (not available for Playlist playback) — Skip 10 tracks (within the same folder) TRK RPT: Repeat current track FLDR RPT: Repeat current folder — Skip 10 tracks (PBC not in use) TRK RPT: Repeat current track (PBC not in use) DISC RND: Randomly play all tracks (PBC not in use) Skip 10 tracks (within the same folder) TRK RPT: Repeat current track FLDR RPT: Repeat current folder FLDR RND: Randomly play all tracks of current folder, then tracks of next folders DISC RND: Randomly play all tracks Skip 10 tracks TRK RPT: Repeat current track DISC RND: Randomly play all tracks • To cancel repeat play or random play, select “RPT OFF” or “RND OFF.” * During play or pause EN16-21_DV7306_005A_f.indd 17 EN16-21_DV7306_005A_f.indd 17 2/9/07 1:51:56 PM 2/9/07 1:51:56 PM

1 Select chapter/title search. + 2 Enter the desired number. + 3 Operations using the remote controller—RM-RK241 : Stop play : Pause (Frame by frame playback if pressed during pause.) : Start play : Reverse/forward chapter search *1 • Slow motion *2 during pause. No sound can be heard. : Press: Select chapter *3 Hold: Reverse/fast-forward chapter search *4 : Select title : Select audio language : Select subtitle language : Select view angle Using menu driven features... 1 / 2 Select an item you want to start play. 3 *1 Search speed changes to × 2 ] × 5 ] × 10 ] × 20 ] × 60 on the monitor if pressed repeatedly. *2 Slow motion speed changes to 1/32 ] 1/16 ] 1/8 ] 1/4 ] 1/2 on the monitor if pressed repeatedly. *3 During play or pause *4 Search speed changes to × 2 ] × 10 on the monitor. EN16-21_DV7306_005A_f.indd 18 EN16-21_DV7306_005A_f.indd 18 2/9/07 1:51:57 PM 2/9/07 1:51:57 PM

: Pause (Frame by frame playback if pressed during pause.) : Start play : Reverse/forward track search *6 : Press: Select track *3 Hold: Reverse/fast-forward track search *7 : Select folder : • Return/advance the scenes by about 5 minutes (Index search). • Select chapter. : DivX: Select subtitles language : DivX: Select audio language To search for track (within the same folder)/folder directly 1 Select track/folder search. + 2 Enter the desired number. + 3 Continued on the next page To search for chapter/program/ playlist directly 1 Select chapter/program/playlist search. + 2 Enter the desired number. + 3 Using menu driven features... 1 / 2 Select an item you want to start play. 3 : Stop play : Pause (Frame by frame playback if pressed during pause.) : Start play : Reverse/forward chapter search *1 • Forward slow motion *2 during pause. No sound can be heard. (Reverse slow motion does not work.) : Press: Select chapter *3 Hold: Reverse/fast-forward chapter search *4 : Select program/playlist : Select audio language : Select subtitle language *1 Search speed changes to × 2 ] × 5 ] × 10 ] × 20 ] × 60 on the monitor if pressed repeatedly. *2 Slow motion speed changes to 1/32 ] 1/16 ] 1/8 ] 1/4 ] 1/2 on the monitor if pressed repeatedly. *3 During play or pause *4 Search speed changes to × 2 ] × 10 on the monitor. *5 During Original program playback (PG)/Playlist playback (PL) *6 Search speed changes 1 ] 2 ] 3 on the monitor if pressed repeatedly. *7 Search speed changes 1 ] 2 on the monitor. EN16-21_DV7306_005A_f.indd 19 EN16-21_DV7306_005A_f.indd 19 2/9/07 1:51:58 PM 2/9/07 1:51:58 PM

same folder)/folder directly 1 Select track/folder search. + 2 Enter the desired number. + 3 To select track directly • For VCD with PBC, a list of items is shown on the disc menu. 1 + 2 Enter the desired number. + 3 • To return to the previous menus, press . Canceling the PBC playback... 1 2 + 3 Enter the desired number. + 4 • To resume PBC, press / . : Stop play : Pause (Frame by frame playback if pressed during pause.) : Start play : Reverse/forward track search *1 • Forward slow motion *2 during pause. No sound can be heard. (Reverse slow motion does not work.) : Press: Select track *3 Hold: Reverse/fast-forward track search *4 : Select audio channel (ST: stereo, L: left, R: Right) : Stop play : Pause : Start play : Reverse/forward track search *1 : Press: Select tracks *3 Hold: Reverse/fast-forward track search *4 : Select folder : Stop play : Pause : Start play : Reverse/forward track search *1 : Press: Select tracks *3 Hold: Reverse/fast-forward track search *4 To search for track directly 1 Select track search. + 2 Enter the desired number. + 3 *1 Search speed changes to × 2 ] × 5 ] × 10 ] × 20 ] × 60 on the monitor if pressed repeatedly. *2 Slow motion speed changes to 1/32 ] 1/16 ] 1/8 ] 1/4 ] 1/2 on the monitor if pressed repeatedly. *3 During play or pause *4 Search speed changes to × 2 ] × 10 on the monitor. EN16-21_DV7306_005A_f.indd 20 EN16-21_DV7306_005A_f.indd 20 2/9/07 1:52:00 PM 2/9/07 1:52:00 PM

These operations are possible on the monitor using the remote controller. ~ Show the on-screen bar (see page 22). (twice) Ÿ Select an item. ! Make a selection. If pop-up menu appears... • To cancel pop-up menu, press . • For entering time/numbers, see the following. ⁄ Remove the on-screen bar. Enlarging the view—Zoom in (DVD/DVD-VR/DivX/MPEG Video/VCD) During play or pause... 1 While holding , press repeatedly. 2 Move the enlarged portion. • To cancel zoom, select “ZOOM OFF.” Entering time/numbers Press to change the number, then press to move to the next entry. • Each time you press , the number increases/decreases by one value. • After entering the numbers, press . • It is not required to enter the zero and tailing zeros (the last two digits in the example below). Ex.: Time search DVD: _:_ _:_ _ (Ex.: 1:02:00) Press once, then twice to go to the third entry, twice, then press ENTER. Continued on the next page EN16-21_DV7306_005A_f.indd 21 EN16-21_DV7306_005A_f.indd 21 2/9/07 1:52:01 PM 2/9/07 1:52:01 PM

2 • DVD-Video/DVD-VR/DTS-CD: Audio signal format type and channel • VCD: PBC 3 Playback mode *1 DVD-Video: T. RPT: Title repeat C. RPT: Chapter repeat DVD-VR: C. RPT: Chapter repeat PG. RPT: Program repeat DivX/MPEG Video: T. RPT: Track repeat F. RPT: Folder repeat VCD *2: T. RPT: Track repeat A. RND: All random T. INT: Track intro *3 4 Playback information Current title/chapter Current program/chapter Current playlist/chapter Current track Current folder/track 5 Time indication Elapsed playing time of the disc (For DVD-Video, elapsed playing time of the current title.) DVD-Video/DVD-VR: Remaining title/program time VCD: Remaining disc time Elapsed playing time of the current chapter/track *4 Remaining time of the current chapter/track *4 6 Playback status Play Forward/reverse search Forward/reverse slow-motion Pause Stop 7 Operation icons Change time indication (see 5) Time Search (Enter the elapsed playing time of the current title or of the disc.) Title Search (by its number) Chapter Search (by its number) Track Search (by its number) Change the audio language or audio channel Change the subtitle language Change the view angle Repeat play *1 Intro play *3 Random play *1 *1 For repeat play/random play, see also page 17. *2 While PBC is not in use. *3 Plays the beginning 15 seconds of... TRACK INTRO : All tracks of the current disc. FOLDER INTRO : First tracks of all folders of the current disc (for MP3/WMA/ WAV only). *4 Not applicable for DVD-VR. EN22-29_DV7306_005A_f.indd 22 EN22-29_DV7306_005A_f.indd 22 2/9/07 1:50:11 PM 2/9/07 1:50:11 PM

2 Folder list with the current folder selected 3 Selected playback mode 4 Elapsed playing time of the current track 5 Operation mode icon ( 3, 7, 8, ¡, 1 ) 6 Current track number/total number of tracks in the current folder (total number of tracks on the disc) 7 Track information 8 Track list with the current track selected To select a playback mode 1 While control screen is displayed... Playback mode selection screen appears on the folder list section of the control screen. 2 Select a playback mode. 3 Select an item. REPEAT/INTRO: RANDOM: 4 Confirm the selection. *1 Not selectable for DivX/MPEG Video *2 FOLDER INTRO/RANDOM: For MP3/WMA/WAV only Operations using the control screen (DivX/MPEG Video/MP3/WMA/WAV/CD) These operations are possible on the monitor using the remote controller. ~ Show the control screen. DivX/MPEG Video: Press during play. MP3/WMA/WAV/CD: Automatically appear during play. Ÿ Select “Folder” column or “Track” column (except for CD). ! Select a folder or track. ⁄ Start playback. DivX/MPEG Video: Press . MP3/WMA/WAV/CD: Playback starts automatically. Ex.: MP3/WMA/WAV disc Continued on the next page EN22-29_DV7306_005A_f.indd 23 EN22-29_DV7306_005A_f.indd 23 2/9/07 1:50:15 PM 2/9/07 1:50:15 PM

These operations are possible on the monitor using the remote controller. Before playing, you can display the folder list/track list to confirm the contents and start playing a track. ~ Display the folder list while stop. Ÿ Select an item from the folder list. • Track list of the selected folder appears. • To go back to the folder list, press . ! Select a track to start playing. • MP3/WMA/WAV: Control screen appears (see page 23). Operations using the list screen (DVD-VR/DivX/MPEG Video/MP3/WMA/WAV) Ex.: Folder list 1 Current folder number/total folder number 2 Current track number/total number of tracks in the current folder 3 Current page/total number of the pages included in the list 4 Current folder/track (highlighted bar) Mode Playback functions F. RPT (folder repeat): Repeat current folder T. RPT (track repeat): Repeat current track F. INT (folder intro): Plays the beginning 15 seconds of first tracks of all folders of the current disc T. INT (track intro): Plays the beginning 15 seconds of all tracks of the current disc A. RND (all random): Randomly play all tracks F. RND (folder random): Randomly play all tracks of current folder, then tracks of next folders EN22-29_DV7306_005A_f.indd 24 EN22-29_DV7306_005A_f.indd 24 2/9/07 1:50:16 PM 2/9/07 1:50:16 PM

You can use ORIGINAL PROGRAM or PLAY LIST screen anytime while playing DVD-VR with its data recorded. 1 Select a list screen. 2 Select an item from the list. 1 Program/playlist number 2 Recording date 3 Recording source (TV station, the input terminal of the recording equipment, etc.) 4 Start time of recording 5 Title of the program/playlist * 6 Current selection (highlighted bar) 7 Creating date of playlist 8 Number of chapters 9 Playback time * The title of the original program or playlist may not be displayed depending on the recording equipment. EN22-29_DV7306_005A_f.indd 25 EN22-29_DV7306_005A_f.indd 25 2/9/07 1:50:17 PM 2/9/07 1:50:17 PM

• See also pages 15 and 16. To stop play and detach the USB device Straightly pull it out from the unit. • Press SRC to listen to another playback source. To change the source to “USB” while listening to other playback source Press SRC to select “USB” if a USB device is attached. Playback starts automatically. • If no USB device is attached, “NO USB” appears on the display. Press SRC to listen to another playback source. Listening to the USB device You can connect a USB mass storage class device such as a USB memory, Digital Audio Player (USB mass storage class device), portable HDD, etc. to the unit. Attaching a USB memory This unit can play DivX/MPEG Video/MP3/WMA/WAV tracks stored in a USB device. Turn on the monitor to watch the playback picture if you play back a DivX/MPEG file. You can also control playback by referring to the monitor screen. (See also pages 21 – 24.) • See pages 18 – 24 for operation using the remote controller. • See pages 42 and 43 for more settings. If “ ” appears on the monitor when pressing a button, the unit cannot accept the operation you have tried to do. • In some cases, without showing “ ,” operations will not be accepted. USB input terminal USB memory EN22-29_DV7306_005A_f.indd 26 EN22-29_DV7306_005A_f.indd 26 2/9/07 1:50:17 PM 2/9/07 1:50:17 PM

• Do not pull out and attach the USB device repeatedly while “READING” is flashing on the display. • Do not start the car engine if a USB device is connected. • Stop play back before disconnecting a USB device. • This unit may not be able to play the files depending on the type of USB device. • You cannot connect a computer to the USB input terminal of the unit. • Make sure all important data has been backed up to avoid losing the data. • Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or cause damages to the device. Pressing (or holding) the following buttons allows you to... File type (Number buttons) *3 Press: Select track Hold: Reverse/fast-forward track *1 Select folder Locate particular folder directly Press: Select track Hold: Reverse/fast-forward track *2 Select folder Locate particular folder directly *1 Search speed changes 1 ] 2 on the monitor. *2 Search speed changes to × 2 ] × 10 on the monitor. *3 Press to select number 1 to 6; hold to select number 7 to 12. After pressing , press the following buttons to... File type Skip 10 tracks (within the same folder) TRK RPT: Repeat current track FLDR RPT: Repeat current folder — Skip 10 tracks (within the same folder) TRK RPT: Repeat current track FLDR RPT: Repeat current folder FLDR RND: Randomly play all tracks of current folder, then tracks of next folders DISC RND: Randomly play all tracks • To cancel repeat play or random play, select “RPT OFF” or “RND OFF.” • To select intro play, see pages 21 and 22 for details. EN22-29_DV7306_005A_f.indd 27 EN22-29_DV7306_005A_f.indd 27 2/9/07 1:50:18 PM 2/9/07 1:50:18 PM

You can also activate and deactivate Dual Zone. 1 2 The source automatically changes to “DISC” when Dual Zone is activated. Dual Zone operations You can connect an external audio equipment to the 2nd AUDIO OUT plug on the rear, and play back a disc separately from the source selected on the unit. You cannot select “AM” or “USB” as the source when Dual Zone is activated. • When Dual Zone is in use, you can only operate the DVD/CD player using the remote controller. On the remote controller: These operations are possible on the monitor using the remote controller. ~ Activate Dual Zone. The source automatically changes to “DISC.” To select a different source to listen through the speakers, press SRC on the control panel. • By using the buttons on the control panel, you can operate the newly selected source without affecting Dual Zone operations. Ÿ Adjust the volume through the 2nd AUDIO OUT plug. ! Operate the DVD/CD player using the remote controller by referring to the monitor screen. • To cancel Dual Zone operations, select “DUAL OFF” in step ~. EN22-29_DV7306_005A_f.indd 28 EN22-29_DV7306_005A_f.indd 28 2/9/07 1:50:19 PM 2/9/07 1:50:19 PM

Use either of the following items in the Bluetooth menu to register and establish the connection with a device. • Select “BT-PHONE” or “BT-AUDIO” as the source to operate the Bluetooth menu. OPEN Make the unit ready to establish a new Bluetooth connection. Connection is established by operating the Bluetooth device. SEARCH Make the unit ready to establish a new Bluetooth connection. Connection is established by operating the unit. Registering using “OPEN” Preparation Operate the device to turn on its Bluetooth function. 1 Select “BT-PHONE” or “BT-AUDIO.” Using the Bluetooth ® devices For Bluetooth operations, it is required to connect the Bluetooth Adapter (KS-BTA200) to the CD changer jack on the rear of this unit. See also page 37. • Refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device. • Refer to the list (included in the box) to see the countries where you may use the Bluetooth® function. To use a Bluetooth device through the unit (“BT-PHONE” and “BT-AUDIO”) for the first time, you need to establish Bluetooth wireless connection between the unit and the device. • Once the connection is established, it is registered in the unit even if you reset your unit. Up to five devices can be registered in total. • Only one device can be connected at a time for each source (“BT-PHONE” and “BT-AUDIO”). Registering a Bluetooth device 2 Select “NEW.” 3 Select “OPEN.” 4 Enter a PIN (Personal Identification Number) code to the unit. • You can enter any number you like (1-digit to 16-digit number). [Initial: 0000] * Some devices have their own PIN code. Enter the specified PIN code to the unit. 1 Move to the next (or previous) number position. 2 Select a number or blank space. 3 Repeat steps 1 and 2 until you finish entering a PIN code. 4 Confirm the entry. “OPEN...” flashes on the display. Continued on the next page EN22-29_DV7306_005A_f.indd 29 EN22-29_DV7306_005A_f.indd 29 2/9/07 1:50:20 PM 2/9/07 1:50:20 PM

3 Use “OPEN” or “SEARCH” to connect. Connecting/disconnecting a registered device 1 Select “BT-PHONE” or “BT-AUDIO.” 2 Select a registered device you want to connect/disconnect. 3 Select “CONNECT” or “DISCNNCT” to connect/ disconnect the selected device. You can set the unit to connect the Bluetooth device automatically when the unit is turned on. (See “AUTO CNT” on page 44.) Deleting a registered device 1 Select “BT-PHONE” or “BT-AUDIO.” 2 Select a registered device you want to delete. 3 Select “DELETE,” then “YES” to delete the selected device. 5 Use the Bluetooth device to search and connect. On the device to be connected, enter the same PIN code you have just entered for this unit. “CONNECT” appears on the display. Now connection is established and you can use the device through the unit. The device remains registered even after you disconnect the device. Use “CONNECT“ (or activate “AUTO CNT”) to connect the same device from next time. (See the following and page 44.) Searching for available devices Perform steps 1 and 2 on page 29, then... 1 Select “SEARCH.” The unit searches and displays the list of the available devices. • If no available device is detected, “UNFOUND” appears. 2 Select a device you want to connect. 3 Enter the specific PIN code of the device to the unit. • Refer to the instructions supplied with the device to check the PIN code. 4 Use the Bluetooth device to connect. Now connection is established and you can use the device through the unit. Connecting a special device Perform steps 1 and 2 on page 29, then... 1 Select “SPECIAL.” The unit displays the list of the preset devices. EN30-37_DV7306_005A_f.indd 30 EN30-37_DV7306_005A_f.indd 30 2/9/07 1:49:38 PM 2/9/07 1:49:38 PM

~ Select “BT-PHONE.” Ÿ Enter Bluetooth menu. ! Make a call or setting using the Bluetooth setting menu. (See pages 32 and 44.) When a call comes in.... The source is automatically changed to “BT-PHONE.” When “AUTO ANS” (answer) is activated.... The unit answers the incoming calls automatically, see page 44. • When “AUTO ANS” (answer) is deactivated, press any button (except /control dial) to answer the incoming call. To end the call Hold any button (except /control dial). • You can adjust the microphone volume level (see page 44). When a text message comes in.... If the cellular phone is compatible with MSG (Message) and “MSG-INFO” (message info) is set to “AUTO” (see page 44), the unit rings and “RCV MSG” (receiving message) appears on the display to inform you the arrival of the message. Change the display information EN30-37_DV7306_005A_f.indd 31 EN30-37_DV7306_005A_f.indd 31 2/9/07 1:49:40 PM 2/9/07 1:49:40 PM

You can make a call using the following methods. Select “BT-PHONE,” then follow the following steps to make a call: 1 2 3 (unless mentioned otherwise) Call history Display the Dial Menu. Select a call history. REDIAL, RECEIVED, MISSED Select a name (if it is acquired) or phone number. Phone book Select “PH BOOK.” The list of phone number appears. Select a name from the list. Direct dialing Select “NUMBER.” Enter the phone number. Voice command 1 “SAY NAME” appears on the display. 2 Speak the name you want to call. • You can also use voice command from the Dial Menu. Select “VOICE” from the Dial Menu. • If your cellular phone does not support the voice recognition system, “ERROR” appears on the display. Preset phone number See page 33 for settings. EN30-37_DV7306_005A_f.indd 32 EN30-37_DV7306_005A_f.indd 32 2/9/07 1:49:41 PM 2/9/07 1:49:41 PM

You can preset up to six phone numbers. 1 Display the Dial Menu. 2 Select “PH BOOK,” “MISSED,” “REDIAL,” or “RECEIVED” whichever you want to use. 3 Select a phone number 4 Using the Bluetooth audio player ~ Select “BT-AUDIO.” If playback did not start automatically, operate the Bluetooth audio player to start playback. • Refer also to page 30 for connecting/disconnecting/deleting a registered device. Bluetooth Information: If you wish to receive more information about Bluetooth, visit our JVC web site. Reverse skip/forward skip Pause/start play back Enter setting menu (Device list) Change the display information EN30-37_DV7306_005A_f.indd 33 EN30-37_DV7306_005A_f.indd 33 2/9/07 1:49:41 PM 2/9/07 1:49:41 PM

Change the display information (see page 16) It is recommended to use a JVC MP3-compatible CD changer with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit. See also page 37. • You can only play conventional CDs (including CD Text) and MP3 discs. Preparation Make sure “CHANGER” is selected for the external input setting, see page 41. ~ Select “CD-CH.” Ÿ Select a disc to start playing. Press: For selecting disc number 1 – 6. Hold: For selecting disc number 7 – 12. Press: Select track Hold: Reverse/fast-forward track MP3: Select folders After pressing , press the following buttons to... Skip 10 tracks (MP3: within the same folder) TRK RPT: Repeat current track FLDR RPT: MP3: Repeat all tracks of current folder DISC RPT: Repeat all tracks of the current disc FLDR RND: MP3: Randomly play all tracks of the current folder, then tracks of the next folder DISC RND: Randomly play all tracks of current disc MAG RND: Randomly play all tracks of the inserted discs • To cancel repeat play or random play, select “RPT OFF” or “RND OFF.” EN30-37_DV7306_005A_f.indd 34 EN30-37_DV7306_005A_f.indd 34 2/9/07 1:49:42 PM 2/9/07 1:49:42 PM

Change the display information Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of the unit. See also page 37. • Interface adapter for iPod—KS-PD100 for controlling an iPod. • D. player interface adapter—KS-PD500 for controlling a D. player. Preparation Make sure “CHANGER” is selected for the external input setting, see page 41. ~ Select “IPOD” or “D. PLAYER.” Ÿ Select a song to start playing. 3 Confirm the selection. • To move back to the previous menu, press 5. • If a track is selected, playback starts automatically. • Holding 4/¢ can skip 10 items at a time. Pause/stop playback • To resume playback, press the button again. Press: Select tracks Hold: Reverse/fast-forward track 1 Enter the main menu. This mode will be canceled if no operations are done for about 5 seconds. 2 Select the desired menu. For iPod: PLAYLIST Ô ARTISTS Ô ALBUMS Ô SONGS Ô GENRES Ô COMPOSER Ô (back to the beginning) For D. player: PLAYLIST Ô ARTIST Ô ALBUM Ô GENRE Ô TRACK Ô (back to the beginning) Selecting a track from the menu Continued on the next page EN30-37_DV7306_005A_f.indd 35 EN30-37_DV7306_005A_f.indd 35 2/9/07 1:49:42 PM 2/9/07 1:49:42 PM

ONE RPT: Functions the same as “Repeat One” of the iPod or “Repeat Mode = One” of the D. player. ALL RPT: Functions the same as “Repeat All” of the iPod or “Repeat Mode = All” of the D. player. ALBM RND*: Functions the same as “Shuffle Albums” of the iPod. SONG RND/RND ON: Functions the same as “Shuffle Songs” of the iPod or “Random Play = On” of the D. player. • To cancel repeat play or random play, select “RPT OFF” or “RND OFF.” * iPod: Functions only if you select “ALL” in “ALBUMS” of the main “MENU.” Listening to the other external components You can connect an external component to: • CD changer jack on the rear of this unit using the following adapters: – Line Input Adapter, KS-U57 – AUX Input Adapter, KS-U58 Make sure “EXT IN” is selected for the external input setting, see page 41. • LINE IN terminals on the rear of this unit. ~ Select “EXT IN” or “LINE IN.” Ÿ Turn on the connected component and start playing the source. ! Adjust the volume. ⁄ Adjust the sound as you want (see pages 38 and 39). Change the display information EN30-37_DV7306_005A_f.indd 36 EN30-37_DV7306_005A_f.indd 36 2/9/07 1:49:43 PM 2/9/07 1:49:43 PM

For connection, see Installation/Connection manual (separate volume). JVC CD changer, [34] Apple iPod, [35] JVC D. player, [35] Unit CD changer jack (see page 41 of the ”EXT IN” setting) (see page 41 of the ”EXT IN” setting) MD player, etc., [36] : Adapter (separately purchased) MD player, etc., [36] MD player, etc., [36] LINE IN terminals with or without (see pages 29 – 33) EN30-37_DV7306_005A_f.indd 37 EN30-37_DV7306_005A_f.indd 37 2/9/07 1:49:43 PM 2/9/07 1:49:43 PM

1 2 Enter the sound adjustment mode. 3 Select a frequency to adjust. 4 Adjust the level. 5 Repeat steps 3 and 4 to adjust the other frequency bands. 6 Store the adjustments in the respective mode. Storing your own sound adjustments Preset frequency level settings: Sound mode Preset equalizing values 60 Hz 150 Hz 400 Hz 1 kHz 2.5 kHz 6.3 kHz 15 kHz USER 00 00 00 00 00 00 00 ROCK +03 +02 00 00 +01 +02 +01 CLASSIC +01 +03 +01 00 00 +02 00 POPS 00 +02 00 00 00 +01 +02 HIP HOP +04 +01 –01 –02 00 +01 00 JAZZ +03 +02 +01 +01 +01 +03 +01 EN38-45_DV7306_005A_f.indd 38 EN38-45_DV7306_005A_f.indd 38 2/9/07 1:51:00 PM 2/9/07 1:51:00 PM

You can change PSM (Preferred Setting Mode) items listed in the table on pages 40 and 41. 1 Enter the PSM settings. 2 Select a PSM item. 3 Select or adjust the selected PSM item. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure. Adjusting the sound 1 2 Adjust the level. FAD *1 (fader) Adjust the front and rear speaker balance. R06 to F06 BAL (balance) Adjust the left and right speaker balance. L06 to R06 LOUD (loudness) Boost low and high frequencies to produce a well-balanced sound at low volume level. LOUD ON or LOUD OFF SUB.W *2 (subwoofer) Adjust subwoofer output balance. 00 to 08; initial: 04 VOL.A *3 (volume adjust) Adjust and store auto-adjustment volume level for each source, comparing to the FM volume level. –05 to +05; initial: 00 VOL (volume) Adjust the volume. 00 to 30 (or 50) *4 *1 If you are using a two-speaker system, set the fader level to “00.” *2 This takes effect only when a subwoofer is connected. *3 You cannot make an adjustment for FM. “FIX” appears. *4 Depending on the amplifier gain control setting. (See page 41 for details.) Continued on the next page EN38-45_DV7306_005A_f.indd 39 EN38-45_DV7306_005A_f.indd 39 2/9/07 1:51:02 PM 2/9/07 1:51:02 PM

Setting, [reference page] DEMO Display demonstration • DEMO ON • DEMO OFF : Display demonstration will be activated automatically if no operation is done for about 20 seconds, [7]. : Cancels. CLK DISP *1 Clock display • ON • OFF : Clock time is shown on the display at all times when the power is turned off. : Cancels; pressing D DISP will show the clock time for about 5 seconds when the power is turned off, [7]. CLOCK H Hour adjustment 1 – 12 : Initial: 1 (1:00), [7]. CLOCK M Minute adjustment 00 – 59 : Initial: 00 (1:00), [7]. DIMMER Dimmer • AUTO • ON • OFF : Dims the display when you turn on the headlights. : Dims the display illumination. : Cancels. TEL Telephone muting • MUTING 1/ MUTING 2 • OFF : Select either one which mutes the sounds while using a cellular phone. : Cancels. SCROLL *2 Scroll • ONCE • AUTO • OFF : Scrolls the track information once. : Repeats scrolling (at 5-second intervals). : Cancels. (Holding D DISP can scroll the display regardless of the setting.) WOOFER Subwoofer cutoff frequency • LOW • MID • HIGH : Frequencies lower than 85 Hz are sent to the subwoofer. : Frequencies lower than 125 Hz are sent to the subwoofer. : Frequencies lower than 165 Hz are sent to the subwoofer. *1 If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select “OFF” to save the car’s battery. *2 Some characters or symbols will not be shown correctly (or will be blanked) on the display. EN38-45_DV7306_005A_f.indd 40 EN38-45_DV7306_005A_f.indd 40 2/9/07 1:51:03 PM 2/9/07 1:51:03 PM

Setting, [reference page] HPF High pass filter • HPF ON • HPF OFF : The cut-off frequency is chosen automatically according to the WOOFER setting (LOW/MID/HIGH) so that you can enjoy the bass sound purely from the subwoofer if it is connected. : Cancels. EXT IN *3 External input • CHANGER • EXT IN : To use a JVC CD changer, [34], or an Apple iPod/a JVC D. player, [35]. : To use any other external component, [36]. TAG DISP Tag display • TAG ON • TAG OFF : Shows the tag while playing MP3/WMA/WAV tracks. : Cancels. VIDEO *4 Video format • PAL • NTSC : Select this if your monitor is of the PAL color system. : Select this if your monitor is of the NTSC color system. REAR SPK *5 Rear speaker output • ON • OFF : Select this to turn on the rear speaker output. : Cancels. AMP GAIN Amplifier gain control • LOW PWR • HIGH PWR : VOL 00 – VOL 30 (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speaker.) : VOL 00 – VOL 50 IF BAND Intermediate frequency band • AUTO • WIDE : Increases the tuner selectivity to reduce interference noises between adjacent stations. (Stereo effect may be lost.) : Subject to interference noises from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. *3 Displayed only when one of the following sources is selected—FM, AM, DISC, USB, Bluetooth, or LINE IN. *4 The newly selected video format takes effect only after you turn on the power again or change the source. *5 Displayed only when Dual Zone is activated (see page 28). EN38-45_DV7306_005A_f.indd 41 EN38-45_DV7306_005A_f.indd 41 2/9/07 1:51:04 PM 2/9/07 1:51:04 PM

AUDIO LANGUAGE Select the initial audio language. Refer also to “Language codes” on page 52. SUBTITLE Select the initial subtitle language or remove the subtitle (OFF). Refer also to “Language codes” on page 52. ON SCREEN LANGUAGE Select the language for the on screen display. Setup menu These operations are possible on the monitor using the remote controller. ~ Enter the setup menu while stop. Ÿ Select a menu. ! Select an item you want to set up. • To cancel pop-up menu, press . ⁄ Select an option. To return to normal screen EN38-45_DV7306_005A_f.indd 42 EN38-45_DV7306_005A_f.indd 42 2/9/07 1:51:04 PM 2/9/07 1:51:04 PM

OSD POSITION Select the on-screen bar position on the monitor. • 1 : Higher position • 2 : Lower position (Guidance below the disc setup menu will disappear.) FILE TYPE (DISC) Select the file type to play. • AUDIO : Play MP3/WMA/WAV files. • VIDEO : Play DivX/MPEG Video files. FILE TYPE (USB) Select the file type to play. • AUDIO : Play MP3/WMA/WAV files. • VIDEO : Play DivX/MPEG Video files. AUDIO DIGITAL AUDIO OUTPUT Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal. • OFF : Cancels. • PCM ONLY : Select for an amplifier or a decoder incompatible with Dolby Digital, DTS, MPEG Audio, or when connecting to a recording device. • DOLBY DIGITAL/PCM : Select for an amplifier or a decoder compatible with Dolby Digital. • STREAM/PCM : Select for an amplifier or a decoder compatible with Dolby Digital, DTS, and MPEG Audio. DOWN MIX When playing back a multi-channel disc, this setting affects the signals reproduced through the LINE OUT jacks (and through the DIGITAL OUT terminal when “PCM ONLY” is selected for “DIGITAL AUDIO OUTPUT”). • SURROUND COMPATIBLE : Select to enjoy multi-channel surround audio by connecting an amplifier compatible with Dolby Surround. • STEREO : Normally select this. D. RANGE COMPRESSION You can enjoy a powerful sound at low or middle volume levels while playing a Dolby Digital software. • AUTO : Select to apply the effect to multi-channel encoded software (excluding 1-channel and 2-channel software). • ON : Select to always use this function. OTHER DivX REGISTRATION This unit has its own Registration Code. Once you have played back a disc in which the Registration Code recorded, this unit’s Registration Code is overwritten for copyright protection. EN38-45_DV7306_005A_f.indd 43 EN38-45_DV7306_005A_f.indd 43 2/9/07 1:51:05 PM 2/9/07 1:51:05 PM

AUTO CNT (connect) When the unit is turned on, the connection is established automatically with.... OFF: No Bluetooth device. LAST: The last connected Bluetooth device. ORDER: The available registered Bluetooth device found at first. AUTO ANS (answer) Only for the device being connected for “BT-PHONE.” ON: The unit answers the incoming calls automatically. OFF: The unit does not answer the calls automatically. Answer the calls manually. REJECT: The unit rejects all incoming calls. MSG-INFO (message info) Only for the device being connected for “BT-PHONE.” AUTO: The unit informs you of the arrival of a message by ringing and displaying “RCV MSG” (receiving message). MANUAL: The unit does not inform you of the arrival of a message. MIC SET (microphone setting) Only for the device being connected for “BT-PHONE.” Adjust microphone volume connected to the Bluetooth adapter, [LEVEL 01/02/03]. VERSION The Bluetooth software and hardware versions are shown. You can change the settings listed on the right column according to your preference. 1 Select “BT-PHONE” or “BT-AUDIO.” 2 Enter the Bluetooth menu. 3 Select “SETTING.” 4 Select a setting item. 5 Change the setting accordingly. Bluetooth settings EN38-45_DV7306_005A_f.indd 44 EN38-45_DV7306_005A_f.indd 44 2/9/07 1:51:05 PM 2/9/07 1:51:05 PM

AM) and up to 8 characters for each title. ~ Select FM/AM. Ÿ Show the title entry screen. ! Assign a title. 1 Select a character. 2 Move to the next (or previous) character position. 3 Repeat steps 1 and 2 until you finish entering the title. ⁄ Finish the procedure. To erase the entire title In step Ÿ on the left... Available characters EN38-45_DV7306_005A_f.indd 45 EN38-45_DV7306_005A_f.indd 45 2/9/07 1:51:06 PM 2/9/07 1:51:06 PM

Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Moisture condensation Moisture may condense on the lens inside the unit in the following cases: • After starting the heater in the car. • If it becomes very humid inside the car. Should this occur, the unit may malfunction. In this case, eject the disc and leave the unit turned on for a few hours until the moisture evaporates. How to handle discs When removing a disc from its case, press down the center holder of the case and lift the disc out, holding it by the edges. • Always hold the disc by the edges. Do not touch its recording surface. When storing a disc into its case, gently insert the disc around the center holder (with the printed surface facing up). • Make sure to store discs into the cases after use. Center holder To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs. To play new discs New discs may have some rough spots around the inner and outer edges. If such a disc is used, this unit may reject the disc. To remove these rough spots, rub the edges with a pencil or ball-point pen, etc. Warped disc Sticker Sticker residue Stick-on label Do not use the following discs: Connector Unusual shape Maintenance EN46-53_DV7306_005A_f.indd 46 EN46-53_DV7306_005A_f.indd 46 2/9/07 1:51:23 PM 2/9/07 1:51:23 PM

• By pressing SRC on the unit, you can also turn on the power. If the source is ready, playback also starts. FM/AM Storing stations in memory • During SSM search... – Received stations are preset in No. 1 (lowest frequency) to No. 6 (highest frequency). – When SSM is over, the station stored in No. 1 will be automatically tuned in. • When storing stations, the previously preset stations are erased and stations are stored newly. Disc/USB General • In this manual, words “track” and “file” are interchangeably used. • This unit can also play back 8 cm discs. • This unit can only play back audio CD (CD-DA) files if different type of files are recorded in the same disc. • This unit can display only one-byte characters. No other characters can be correctly displayed. • When a disc is inserted upside down, “PLEASE” and “EJECT” appear alternately on the display. Press 0 to eject the disc. • If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. Playback starts automatically. • After ejecting a disc or removing a USB device, “NO DISC” or “NO USB” appears and you cannot operate some of the buttons. Insert another disc, reattach a USB device, or press SRC to select another playback source. • If you change the source, playback also stops. Next time you select the same source again, playback starts from where it has been stopped previously. More about this unit • While playing from a USB device, the playback order may differ from other players. • This unit is compatible with the USB Full-Speed. • Depending on the shape of the USB devices and connection ports, some USB devices may not be attached properly or the connection might be loose. • When connecting a USB device, refer also to its instructions. • Connect one USB device to the unit at a time. Do not use a USB hub. • If the connected USB device does not have the correct files, “NO FILE” appears. • This unit may be unable to play back some USB devices or some files due to their characteristics or recording conditions. • The unit cannot recognize a USB mass storage class device whose rating is other than 5 V and does not exceed 500 mA. • This unit may not recognized a USB device connected through a USB card reader. • This unit may not play back files in a USB device properly when using a USB extension cord. • This unit cannot assure proper functions or supply power to all types of USB devices. Playing Recordable/Rewritable discs • This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder). • This unit can recognize a total 25 characters for file/ folder names. • Use only “finalized” discs. • This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing. • Some discs or files may not be played back due to their characteristics or recording conditions. • Rewritable discs may require a longer readout time. Continued on the next page EN46-53_DV7306_005A_f.indd 47 EN46-53_DV7306_005A_f.indd 47 2/9/07 1:51:25 PM 2/9/07 1:51:25 PM

for Recordable Media) protected files. • For details about DVD-VR format and playlist, refer to the instructions supplied with the recording equipment. Playing DivX files • This unit can play back DivX files with the extension code <.divx>, <.div>, <.avi> (regardless of the letter case—upper/lower). • This unit supports DivX 6.x, 5.x, 4.x, and 3.11. • This unit can display a unique registration code— DivX Video-on-Demand (VOD—a kind of Digital Rights Management). For activation and more details, visit . • Audio stream should conform to MP3 or Dolby Digital. • Index Search: • This unit does not support GMC (Global Motion Compression). • The file encoded in the interlaced scanning mode may not be played back correctly. • This unit cannot play back the following files: – Files encoded in Codec (Compressor-decompressor) other than DivX Codec. • The maximum bit rate for video signals (average) is as follow: DVD: 4 Mbps; USB: 2 Mbps • If you want to know more about DivX, visit . Playing MPEG Video files • This unit can play back MPEG Video files with the extension code <.mpg>, <.mpeg>, or <.mod>*. * <.mod> is an extension code used for the MPEG-2 files recorded by JVC Everio camcorders. • The stream format should conform to MPEG system/ program stream. • The file format should be MP@ML (Main Profile at Main Level)/SP@ML (Simple Profile at Main Level)/ MP@LL (Main Profile at Low Level). • Audio stream should conform to MPEG1 Audio Layer 2. • This unit cannot playback the following files: – WMV (Windows Media Video) files – RM (Real Media) format files • The maximum bit rate for video signals (average) is as follow: DVD: 4 Mbps; USB: 2 Mbps Playing MP3/WMA/WAV files • This unit can play back files with the extension code <.mp3>, <.wma>, or <.wav> (regardless of the letter case—upper/lower). • This unit can play back MP3/WMA/WAV files meeting the conditions below: MP3: – Bit rate: 32 kbps — 320 kbps – Sampling frequency: 48 kHz, 44.1 kHz, 32 kHz (for MPEG-1) 24 kHz, 22.05 kHz, 16 kHz (for MPEG-2) WMA: – Bit rate: 32 kbps — 320 kbps – Sampling frequency: 48 kHz, 44.1 kHz, 32 kHz, 22.05 kHz – Channel: Mono/stereo WAV: – Sampling frequency: 44.1 kHz – Channel: 1 ch/2 ch • This unit can recognize a total of 5 000 files and 250 folders (999 files per folder). • The maximum number of characters for folder and file names is 25 characters; 128 characters for MP3/ WAV Tag, 64 characters for WMA Tag. • This unit can show ID3 Tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for MP3 and show WMA/WAV Tag. • This unit can play back files recorded in VBR (variable bit rate). Files recorded in VBR have a discrepancy in elapsed time indication. • This unit cannot play back the following files: – MP3 files encoded with MP3i and MP3 PRO format. – MP3 files encoded with Layer 1/2. – WMA files encoded with lossless, professional, and voice format. EN46-53_DV7306_005A_f.indd 48 EN46-53_DV7306_005A_f.indd 48 2/14/07 5:54:24 PM 2/14/07 5:54:24 PM

iPod or D. player • When you turn on this unit, the iPod or D. player is charged through this unit. • While the iPod or D. player is connected, all operations from the iPod or D. player are disabled. Perform all operations from this unit. • The text information may not be displayed correctly. • If the text information includes more than 8 characters, it scrolls on the display. This unit can display up to 40 characters. Notice: When operating an iPod or a D. player, some operations may not be performed correctly or as intended. In this case, visit the following JVC web site: For iPod users: For D. player users: Title assignment • If you try to assign titles to more than 30 station frequencies, “NAMEFULL” appears. Delete unwanted titles before assignment. General settings—PSM • “AUTO” setting for “DIMMER” may not work correctly on some vehicles, particularly on those having a control dial for dimming. In this case, change the “DIMMER” setting to any other than “AUTO.” • If you change the “AMP GAIN” setting from “HIGH PWR” to “LOW PWR” while the volume level is set higher than “VOL 30,” the unit automatically changes the volume level to “VOL 30.” – WMA files which are not based upon Windows Media® Audio. – WAV files encoded using MS-ADPCM. – Files which have the data such as AIFF, ATRAC3, etc. Bluetooth operations General • While driving, do not perform complicated operation such as dialing the numbers, using phone book, etc. When you perform these operations, stop your car in a safe place. • Some Bluetooth devices may not be connected to this unit depending on the Bluetooth version of the device. • This unit may not work for some Bluetooth devices. • Connecting condition may vary depending on the circumstances around you. • When the unit is turned off, the device is disconnected. Warning messages for Bluetooth operations ERR CNCT (Error Connection) The device is registered but the connection has failed. Use “CONNECT” to connect the device again. (See page 30.) ERROR Try the operation again. If “ERROR” appears again, check if the device supports the function you have tried. UNFOUND No available Bluetooth device is detected by “SEARCH.” LOADING The unit is updating the phone book and/or text messages. WAIT The unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and turn on the unit, then connect the device again (or reset the unit). RESET 8 Check the connection between the adapter and this unit. EN46-53_DV7306_005A_f.indd 49 EN46-53_DV7306_005A_f.indd 49 2/9/07 1:51:26 PM 2/9/07 1:51:26 PM

on a file, the original language is automatically used as the initial language. In addition, the initial languages settings will not work as you set due to their internal programming. • When you select “16:9” for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width. • Even if “4:3 PAN SCAN” is selected, the screen size may become “4:3 LETTERBOX” for some files. On-screen guide icons During playback, the following guide icons may appear for a while on the monitor. : Playback : Pause : DVD-Video/DVD-VR/VCD: Forward slow motion : DVD-Video: Reverse slow motion : Forward search : Reverse search DVD: The following icons appear at the beginning of a scene containing: : Multi-subtitle languages : Multi-audio languages : Multi-angle views About sounds reproduced through the rear terminals • Through the analog terminals (Speaker out/ LINE OUT/2nd AUDIO OUT): 2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed. DTS sound cannot be reproduced. (AUDIO—DOWN MIX: see page 43.) • Through DIGITAL OUT (optical): Digital signals (Linear PCM, Dolby Digital, DTS, MPEG Audio) are emitted through this terminal. (For more details, see table on page 51.) To reproduce multi-channel sounds such as Dolby Digital, DTS, and MPEG Audio, connect an amplifier or a decoder compatible with these multi-channel sources to this terminal, and set “DIGITAL AUDIO OUTPUT” correctly. (See page 43.) • About Dual Zone: Through the 2nd AUDIO OUT, 2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed. (See page 28.) EN46-53_DV7306_005A_f.indd 50 EN46-53_DV7306_005A_f.indd 50 2/9/07 1:51:26 PM 2/9/07 1:51:26 PM

Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page 43). Playback Disc Output Signal STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY OFF DVD-Video 48 kHz, 16/20/24 bits Linear PCM 48 kHz, 16 bits stereo Linear PCM * OFF 96 kHz, Linear PCM 48 kHz, 16 bits stereo Linear PCM Dolby Digital Dolby Digital bitstream 48 kHz, 16 bits stereo Linear PCM DTS DTS bitstream MPEG Audio MPEG bitstream 48 kHz, 16 bits stereo Linear PCM Audio CD, Video CD 44.1 kHz, 16 bits stereo Linear PCM / 48 kHz, 16 bits stereo Linear PCM Audio CD with DTS DTS bitstream DivX/MPEG Dolby Digital Dolby Digital bitstream 48 kHz, 16 bits stereo Linear PCM MPEG Audio 32/44.1/48 kHz, 16 bits Linear PCM MP3/WMA 32/44.1/48 kHz, 16 bits Linear PCM WAV 44.1 kHz, 16 bits stereo Linear PCM * Digital signals may be emitted at 20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal if the discs are not copy-protected. Continued on the next page EN46-53_DV7306_005A_f.indd 51 EN46-53_DV7306_005A_f.indd 51 2/9/07 1:51:27 PM 2/9/07 1:51:27 PM

Tajik AY Aymara GD Scots Gaelic KY Kirghiz PT Portuguese TH Thai AZ Azerbaijani GL Galician LA Latin QU Quechua TI Tigrinya BA Bashkir GN Guarani LN Lingala RM Rhaeto- Romance TK Turkmen BE Byelorussian GU Gujarati LO Laothian RN Kirundi TL Tagalog BG Bulgarian HA Hausa LT Lithuanian RO Rumanian TN Setswana BH Bihari HI Hindi LV Latvian, Lettish RW Kinyarwanda TO Tonga BI Bislama HR Croatian MG Malagasy SA Sanskrit TR Turkish BN Bengali, Bangla HU Hungarian MI Maori SD Sindhi TS Tsonga BO Tibetan HY Armenian MK Macedonian SG Sangho TT Tatar BR Breton IA Interlingua ML Malayalam SH Serbo-Croatian TW Twi CA Catalan IE Interlingue MN Mongolian SI Singhalese UK Ukrainian CO Corsican IK Inupiak MO Moldavian SK Slovak UR Urdu CS Czech IN Indonesian MR Marathi SL Slovenian UZ Uzbek CY Welsh IS Icelandic MS Malay (MAY) SM Samoan VI Vietnamese DZ Bhutani IW Hebrew MT Maltese SN Shona VO Volapuk EL Greek JI Yiddish MY Burmese SO Somali WO Wolof EO Esperanto JW Javanese NA Nauru SQ Albanian XH Xhosa ET Estonian KA Georgian NE Nepali SR Serbian YO Yoruba EU Basque KK Kazakh NO Norwegian SS Siswati ZU Zulu EN46-53_DV7306_005A_f.indd 52 EN46-53_DV7306_005A_f.indd 52 2/9/07 1:51:27 PM 2/9/07 1:51:27 PM

Symptom Remedy/Cause General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 3). FM/AM • SSM automatic presetting does not work. Store stations manually. • Static noise while listening to the radio. Connect the antenna firmly. Discs in general • Disc cannot be played back. Insert the disc correctly. • Disc can be neither played back nor ejected. • Unlock the disc (see page 13). • Eject the disc forcibly (see page 3). • Recordable/Rewritable discs cannot be played back. • Tracks on the Recordable/Rewritable discs cannot be skipped. • Insert a finalized disc. • Finalize the discs with the component which you have used for recording. • Disc cannot be recognized. Eject the disc forcibly (see page 3). • Sound and pictures are sometimes interrupted or distorted. • Stop playback while driving on rough roads. • Change the disc. • Check the cords and connections. • No playback picture (DVD-Video/DVD-VR/ DivX/MPEG/VCD) appears on the monitor. Parking brake wire is not connected properly. (See Installation/Connection Manual.) • No picture appears on the monitor at all. • Connect the video cord correctly. • Select a correct input on the monitor. • The monitor shows black and white wavy pictures (DVD-Video/DVD-VR/DivX/MPEG/ VCD). Select an appropriate video format (PAL/NTSC) for your monitor (see page 41). • The left and right edges of the picture are missing on the monitor. Select “4:3 LETTERBOX” (see page 43). Continued on the next page EN46-53_DV7306_005A_f.indd 53 EN46-53_DV7306_005A_f.indd 53 2/9/07 1:51:28 PM 2/9/07 1:51:28 PM

• Tracks cannot be played back. • Record the tracks using a compliant application in the appropriate discs (see page 6). • Add the extension code <.divx>, <.div>, <.avi>, <.mpg>, <.mpeg>, <.mp3>, <.wma>, or <.wav> to the file names. • Noise is generated. The track played back is not an MP3/WMA/WAV track. Skip to another track. (Do not add the extension code <.mp3>, <.wma>, or <.wav> to non-MP3/WMA/WAV tracks.) • While playing a track, sound is sometimes interrupted while listening to a USB device. MP3/WMA/WAV tracks have not been properly copied into the USB device. Copy MP3/WMA/WAV tracks again into the USB device, and try again. • Longer readout time is required. • “READING” keeps flashing on the display while listening to a USB device. • Readout time varies due to the complexity of the folder/ file configuration. • Readout time varies depending on the USB device. • Do not use too many hierarchy, folders, and empty folders*. • Turn off the power then on again. * Folder that is physically empty or folder that contains data but does not contain valid MP3/WMA/WAV track. • Tracks cannot play back as you have intended them to play. Playback order is determined when files are recorded. • No sound can be heard when picture is displayed while playing a DivX/MPEG Video file. • Record the audio track using MP3 or Dolby Digital as the audio stream of DivX files. • Record the audio track using MPEG1 Audio Layer 2 as the audio stream for MPEG Video files. • Elapsed playing time is not correct. This sometimes occurs during playback. This is caused by how the tracks are recorded. • “PLEASE” and “EJECT” appear alternately on the display while listening to a disc. • “NO FILE” or “NO USB” appears on the display while listening to a USB device. • Insert a disc that contains tracks encoded in an appropriate format. • Connect a USB device that contains tracks encoded in an appropriate format. • The total number of tracks recorded on the USB device could not be accessed properly. • Correct characters are not displayed (e.g. album name). This unit can only display letters (upper case), numbers, and a limited number of symbols. EN54-59_DV7306_005A_f.indd 54 EN54-59_DV7306_005A_f.indd 54 2/9/07 1:50:36 PM 2/9/07 1:50:36 PM

The unit can be connected with one Bluetooth cellular phone and one Bluetooth audio device at a time. While connecting a device, this unit cannot be detected from another device. Disconnect currently connected device and search again. • The unit does not detect the Bluetooth device. • Check the Bluetooth setting of the device. • Search from the Bluetooth device. After the device detects the unit, select “OPEN” on the unit to connect the device. (See page 29.) • The unit does not make pairing with the Bluetooth device. • Enter the same PIN code for both the unit and target device. • Select the device name from “SPECIAL,” then try to connect again. (See page 30.) • Echo or noise occurs. Adjust the microphone unit position. • Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth audio device. • Move the car to a place where you can get a better signal reception. • The sound is interrupted or skipped during playback of a Bluetooth audio device. • Reduce the distance between the unit and the Bluetooth audio device. • Disconnect the device connected for “BT-PHONE.” • Turn off, then turn on the unit. • (When the sound is not yet restored,) connect the device again. • The connected audio device cannot be controlled. Check whether the connected audio device supports AVRCP (Audio Video Remote Control Profile). * For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter. Continued on the next page EN54-59_DV7306_005A_f.indd 55 EN54-59_DV7306_005A_f.indd 55 2/9/07 1:50:38 PM 2/9/07 1:50:38 PM

Insert a disc into the magazine. • “NO MAG” appears on the display. Insert the magazine. • “RESET 8” appears on the display. Connect this unit and the CD changer correctly and press the reset button of the CD changer. • “RESET 1” – “RESET 7” appears on the display. Press the reset button of the CD changer. • The CD changer does not work at all. Reset the unit (see page 3). iPod/D. player • The iPod or D. player does not turn on or does not work. • Check the connecting cable and its connection. • Update the firmware version. • Charge the battery. • The sound is distorted. Deactivate the equalizer either on this unit or the iPod/D. player. • “NO IPOD” or “NO DP” appears on the display. • Check the connecting cable and its connection. • Charge the battery. • Playback stops. The headphones are disconnected during playback. Restart the playback operation (see page 35). • No sound can be heard when connecting an iPod nano. • Disconnect the headphones from the iPod nano. • Update the firmware version of the iPod nano. • No sound can be heard. • “ERROR 01” appears on the display when connecting a D. player. Disconnect the adapter from the D. player. Then, connect it again. • “NO FILES” or “NO TRACK” appears on the display. No tracks are stored. Import tracks to the iPod or D. player. • “RESET 1” – “RESET 7” appears on the display. Disconnect the adapter from both this unit and iPod/ D. player. Then, connect it again. • “RESET 8” appears on the display. Check the connection between the adapter and this unit. • The iPod’s or D. player’s controls do not work after disconnecting from this unit. Reset the iPod or D. player. EN54-59_DV7306_005A_f.indd 56 EN54-59_DV7306_005A_f.indd 56 2/9/07 1:50:38 PM 2/9/07 1:50:38 PM

Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Range: Frequencies: 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.3 kHz, 15 kHz Level: ±10 dB Signal to Noise Ratio: 70 dB Audio Output Level: Digital (DIGITAL OUT: Optical): Signal wave length: 660 nm Output level: –21 dBm to –15 dBm Line-Out Level/Impedance: 2.5 V/20 kΩ load (full scale) Output Impedance: 1 kΩ Subwoofer-out Level/Impedance: 2.5 V/20 kΩ load (full scale) Color system: PAL/NTSC Video Output (composite): 1 Vp-p/75 Ω Other Terminal: CD changer, LINE IN, 2nd AUDIO OUT TUNER SECTION Frequency Range: FM: 87.5 MHz to 108.0 MHz AM: 531 kHz to 1 602 kHz FM Tuner: Usable Sensitivity: 11.3 dBf (1.0 μV/75 Ω) 50 dB Quieting Sensitivity: 16.3 dBf (1.8 μV/75 Ω) Alternate Channel Selectivity (400 kHz): 65 dB Frequency Response: 40 Hz to 15 000 Hz Stereo Separation: 30 dB AM Tuner: Sensitivity/Selectivity: 20 μV/35 dB Continued on the next page EN54-59_DV7306_005A_f.indd 57 EN54-59_DV7306_005A_f.indd 57 2/9/07 1:50:38 PM 2/9/07 1:50:38 PM

Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: DVD, fs=48 kHz/96 kHz: 16 Hz to 22 000 Hz CD, fs=44.1 kHz: 16 Hz to 20 000 Hz Dynamic Range: 96 dB Signal-to-Noise Ratio: 98 dB Wow and Flutter: Less than measurable limit DivX/MPEG Video: Video: Max. Resolution: 720 × 480 pixels (30 fps) 720 × 576 pixels (25 fps) Audio: Bit Rate: DivX: 32 kbps – 320 kbps MPEG Video: 32 kbps – 320 kbps Sampling Frequency: DivX: MPEG-1: 32 kHz, 44.1 kHz, 48 kHz MPEG-2: 16 kHz, 22.05 kHz, 24 kHz Sampling Frequency: MPEG Video: 32 kHz, 44.1 kHz, 48 kHz MP3: Bit Rate: 32 kbps – 320 kbps Sampling Frequency: MPEG-1: 32 kHz, 44.1 kHz, 48 kHz MPEG-2: 16 kHz, 22.05 kHz, 24 kHz WMA: Bit Rate: 32 kbps – 320 kbps Sampling Frequency: 22.05 kHz, 32 kHz, 44.1 kHz, 48 kHz WAV: Quantization Bit Rate: 16 bit Sampling Frequency: 44.1 kHz EN54-59_DV7306_005A_f.indd 58 EN54-59_DV7306_005A_f.indd 58 2/9/07 1:50:38 PM 2/9/07 1:50:38 PM

Data Transfer Rate: Full Speed: Max. 12 Mbps Low Speed: Max. 1.5 Mbps Compatible Device: Mass storage class Compatible File System: FAT 12/16/32 Playable Audio/Video Format: DivX/MPEG Video/MP3/WMA/WAV Max. Current: 500 mA GENERAL Power Requirement: Operating Voltage: DC 14.4 V (11 V to 16 V allowance) Grounding System: Negative ground Allowable Operating Temperature: 0°C to +40°C Dimensions (W × H × D): Installation Size (approx.): 182 mm × 52 mm × 158 mm Panel Size (approx.): 188 mm × 58 mm × 12 mm Mass (approx.): 1.6 kg (excluding accessories) Design and specifications are subject to change without notice. • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • “DTS” and “DTS Digital Out” are registered trademarks of DTS, Inc. • “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other countries. • DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, inc. and are used under license. • Official DivX® Ultra Certified product • Plays all versions of DivX® video (including DivX® 6) with enhanced playback of DivX® media files and the DivX® Media Format • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • iPod is a trademark of Apple Inc., registered in the U.S. and other countries. • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Victor Company of Japan, Limited (JVC) is under license. Other trademarks and trade names are those of their respective owners. EN54-59_DV7306_005A_f.indd 59 EN54-59_DV7306_005A_f.indd 59 2/9/07 1:50:39 PM 2/9/07 1:50:39 PM

EN 0207DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_KD-DV7306_005A_f.indd 2 Rear_KD-DV7306_005A_f.indd 2 2/6/07 12:15:26 PM 2/6/07 12:15:26 PM

WARNINGS • DO NOT install any unit in locations where; – it may obstruct the steering wheel and gearshift lever operations. – it may obstruct the operation of safety devices such as air bags. – it may obstruct visibility. • DO NOT operate the unit while driving. • If you need to operate the unit while driving, be sure to look ahead carefully. • The driver must not watch the monitor while driving. If the parking brake is not engaged, “DRIVER MUST NOT WATCH THE MONITOR WHILE DRIVING.” appears on the monitor, and no playback picture will be shown – This warning appears only when the parking brake wire is connected to the parking brake system built in the car. To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical connections before installing the unit. • Be sure to ground this unit to the car’s chassis again after installation. Notes: • Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC car audio dealer. • It is recommended to connect to the speakers with maximum power of more than 50 W (both at the rear and at the front, with an impedance of 4 Ω to 8 Ω). If the maximum pow “AMP GAIN” setting to prevent the speakers from being damaged (see page 41 of the INSTRUCTIONS). • To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape. • The heat sink becomes very hot after use. Be careful not to touch it when removing this unit. PRECAUTIONS on power supply and speaker connections: • DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit will be seriously damaged. • BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in your car. © 2007 Victor F Crimp connector G Washer (ø5) Parts list for installation and connection If any item is missing, consult your JVC car audio dealer immediately. A / B Hard case/Control panel C Sleeve D Trim plate E Power cord Heat sink

The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company • If you are not sure how to install this unit correctly, have it installed by a qualified technician. Removing the unit Before removing the unit, release the rear section. Do the required electrical connections. Bend t the sle When installing the unit without using the sleeve In a Toyota car for example, first remove the car radio and install the unit in its place. When using the optional stay Note : When installing the unit on the mounting bracket, make sure to use the 8 m are used, they could damage the unit. Install the unit at an angle of less than 30˚. TROUBLESHOOTING • The fuse blows. * Are the red and black leads connected correctly? Insert the two handles, then pull them as illustrated so that the unit can be removed. Screw (option) Stay (option) Fire wall Dashboard Bracket *2 Flat type scre Pocket Flat type screws (M5 × 8 mm) *2 Bracket *2 *1 When you stand the unit, be careful not to damage the fuse on the rear. *2 Not supplied for this unit.

When installing the monitor in a location where it can be seen by the driver Connect the parking brake wire to the parking brake system built in the car. When installing the monitor in a location where it cannot be seen by the driver Connect the parking brake wire to metallic body or chassis of the car. Connecting the crimp connector C Parking brake wire (light green) To metallic body or chassis of the car Parking brake switch (inside the car) Parking brake Parking brake wire (light green) A Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color. Wire connecting the battery and the parking brake switch. Attach the parking brake wire to this point. Pinch the crimp firmly. Typical connections ELECTRICAL CONNECTIONS To external components (see diagram ) Light green VIDEO (see diagram ) DIGITAL OUT (see diagram ) To parking brake, metallic body o 15 A fuse Black Blue with white stripe Red Yellow *2 To metallic body or chassis of the car To an accessory terminal in the fuse block To the remote lead of other equipment (200 m To a live terminal in the fuse block connecting to the car battery (bypassing the ignition switch) (constant 12 V) LINE OUT (see diagram ) Rear ground terminal Left speaker (front) Right speaker (front) Left speaker (rear) Purple with black stripe Green Green with black stripe Gray Gray with black stripe White White with black stripe LINE IN (see diagram ) To the automatic antenna if any (250 mA max.) Blue 2nd AUDIO OUT (see diagram ) SW (Subwoofer) (see diagram ) Antenna connector Brown To cellular phone system Orange with white stripe To car light control switch D Required connections for DVD playback Video cord *1 or Signal cord *1 1 Connect the colored leads of the power cord in the order specified i 2 Connect the antenna cord. 3 Finally connect the wiring harness to the unit.

Remote lead (blue with white stripe) To the remote lead of oth if any Front speakers JVC Amplifier Front speakers JVC You can connect these components as illustrated below. • All the components, adapters, or signal cords need to be purchased separately. CAUTION: Before connecting the external components, make sure that the unit is turned off. • To use JVC CD changer, Apple iPod or JVC D. player, set the external input setting to “CHANGER” (see page 41 of the INSTRUCTIONS). • To use other external components via KS-U57 or KS-U58, set the external input setting to “EXT IN” (see page 41 of the INSTRUCTIONS). Other external component Connecting the external components F E Connecting the external amplifiers and subwoofer You can connect amplifiers to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit. • Disconnect the speakers from this unit, connect them to the amplifier. Leave the speaker leads of this unit unused. To KS-BTA200 or KD-DV7306/KD-DV7305 JVC CD chan Apple iPo JVC D. pla CD changer jack or or or or External comp External comp with or without iPod is a trademark of Apple Inc., registered in the U.S. and other countries.