Epson 875DCS - Stylus Photo Color Inkjet Printer Printer Basics Manual

Be sure you have a new ink cartridge before you begin. Once you start the ink cartridge replacement procedure, you must complete all the steps in one session. Follow these steps to replace ink cartridges: 1. Make sure the printer is turned on and not printing (the Ppower light should be on, but not flashing). 2. Check the B black and A color ink out lights to see which ink cartridge you need to replace. 3. Open the printer cover and press the orange ink cartridge replacement button. The print head moves left and the Ppower light begins flashing. 4. The ...

3. Click OK. Copying Photos to Your Computer To correct or print photos using Image Expert, you need to copy them to your hard drive. You can copy all the pictures on your Memory Stick, or just selected pictures. Follow these steps: 1. To copy all the pictures on your Memory Stick, click the Get Images button, or select Get All Images from the Camera menu. (You don’t have to view the pictures first.) To copy selected pictures, view them first and click the thumbnail for each picture you want to copy while holding down the Ctrl key (Windows) or O ...

appear in the Image Expert work area, but you can’t print them. You have to copy the photos to an album on your hard drive before you can print them (see page 36 for instructions). If PC Card appears on a filmstrip’s titlebar, the images displayed are on the Memory Stick, not in an album on your hard drive. EPSON USB RW Switcher doesn’t toggle between read-only mode and write-to-disk mode. Make sure EPSON Stylus Photo 875DCS is selected as the default printer in the Printers utility (Windows), or SP 875DCS is selected in the Chooser (Macintosh). You can ...

After you open your application program and create your document, you’re ready to select your printer software settings. From the File menu, click Print. You see your application’s Print window: Make the following selections on the Print window (your window may look slightly different): I Make sure your EPSON Stylus Photo 875DCS printer model is selected. I Click the Properties button. (If you see a Setup, Printer, or Options button, click it. Then click Properties on the next screen.) If you click the print icon on your application’s toolbar instead of sel ...

When the B black or A color ink out light flashes, the indicated cartridge is low on ink. This is a good time to make sure you have a new cartridge. When the light stays on, the cartridge is empty and you need to replace it. When an installed ink cartridge is more than six months old, you may also need to replace it if you notice that your printouts don’t look as good as they used to. If print quality doesn’t improve after cleaning and aligning the print head, you can replace one or both cartridges. To check the level of ink you have left, see the graphic in t ...

damaged by improper disconnection of the USB cable, then you: I Turned off the printer or disconnected the USB cable without first ejecting the Memory Stick I Pressed one of the eject levers without first clicking the Memory Stick icon on your desktop and selecting Eject from the Special menu. If this happens, turn your printer back on, reconnect the USB cable, or reinsert the Memory Stick, whichever is necessary. Go through the correct procedure to eject the Memory Stick, and then restart your Macintosh. If You Don’t Want to ...