Kinivo M2 Operation & User’s Manual

8 Installation guide 1. Connect the red satellite cable to the red output port on the subwoofer. Connect the white satellite cable to the white output port on the speaker. 2. “(Optional) If you want to use a wired connection to play music, then connect the included RCA cable to the input ports and connect the 3.5mm input to your computer / phone / tablet. PC and Notebook Tablet Smartphone ...

Troubleshooting 1. Unable to pair to device / device no longer connects to M2 Make sure that the M2 is not connected to another Bluetooth device. Pressing the pairing button will disconnect the Bluetooth connection with the other device and put the M2 speaker in pairing mode. Now open the Bluetooth configuration on the device you are trying to pair to and scan for Bluetooth devices. You should see the Kinivo M2 speaker - proceed to pair and connect the speaker. Please refer to the Operation section for additional Bluetooth Pairing instructions. 2. Spea ...

Features Seamlessly stream music from your iPad, iPhone, Android device or other Bluetooth enabled devices wirelessly Powerful sub-woofer for rich and deep Bass Supports Bluetooth A2DP profile. Note: Does not support the headset/ hands free profile (HSP/HFP) for calling Connect an iPod or other non-Bluetooth devices via the 3.5mm headphone jack (Optional) Operation 1. Turn Unit On/Off Toggle the power switch to power the speaker on and off. 2. Adjust Volume, Bass, and Treble Use the dial on the side of the Subwoofer to adjust the volume. Use the dia ...

5. To Pair with Mac OS X a. After putting the Kinivo M2 Speaker in pairing mode, click the Bluetooth tray icon then select ‘Set Up Bluetooth Device’ from the drop down menu. b. Locate the Kinivo M2 from the devices list and click Continue. c. You should see that the device pairing has successfully completed. Continue by clicking Quit. d. To use the speaker as the default audio device, click the Bluetooth tray icon and hover over the Kinivo M2 option then select ‘Use as Audio Device’. e. The next time you adjust the volume in the menu ...

3.5mm to RCA stereo cable User manual Speaker Overview 1. Volume 2. Treble 3. Bass 4. Audio input 5. Audio output 6. Power switch 7. Power cable 8. Bluetooth status LED 9. Source selector 10. Pairing button 2 1 3 4 5 6 7 8 9 10 ...

Important Safety Instructions Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and ...

6 19. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operat ...