KitchenAid KWVU205Y Dimension Manual

OVERALL DIMENSIONS VENTING REQUIREMENTS KWVU205Y KWVU265Y Electrical: 120-volt, 60-Hz, AC-only, 15-amp. electrical supply. Use copper wire only. A time- delay fuse or circuit breaker and separate circuit is recommended. 30" and 36" Slide-out Vent System Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice. Ref. 4360365 Rev. C 08-08-02 ® 3/8" (9.5 mm) BACK OF VENT HOOD FRONT OF VENT HOOD 3-1/4" (8.3 cm) 4-3/8" (11.1 cm) 10" (25.4 cm) 30" (76.2 cm) model: 8" (20.3 cm) 36" (91.4 cm) model: 11" (27.9 cm) 30" (76.2 cm) model: 26" (66.0 cm) 36" (91.4 cm) model: 32" (81.3 cm) 30" (76.2 cm) model: 29-7/8" (75.9 cm) 36" (91.4 cm) model: 35-7/8" (91.1 cm) 66" (167.6 cm) maximum distance from upper cabinet hood mounting surface to floor 24" (61 cm) minimum distance from underside of range hood to cooking surface or countertop 15" (38.1 cm) minimum upper cabinet height 13" (33 cm) upper cabinet depth 30" (76.2 cm) model: 13" (33.0 cm) 36" (91.4 cm) model: 16" (40.6 cm) 9-1/2" (24.1 cm) glass shelf extends 7" (17.8 cm) 8" (20.3 cm) 9-1/8" (23.2 cm) 11" (27.9 cm) 1" (25.4 mm) 1-5/8” (41.3 mm) 1-1/4" (31.8 mm) 1-7/16" (3.6 cm) 1/4" (6.4 mm) 2" (5.1 cm) 5/8" to 2-1/8" (1.6 cm to 5.4 cm) 2" (5.1 cm) 2-3/8" (6.0 cm) Roof venting 3-1/4" x 10" (8.3 cm x 25 cm) vent through the roof Wall venting 3-1/4" x 10" (8.3 cm x 25 cm) vent through the wall wall cap 3-1/4" x 10” (8.3 cm x 25 cm) 90° elbow wall cap Maximum length = 26 ft. (8 m) 1 — 90° elbow = 5 ft. (1.5 m) 9 ft. (2.8 m) straight = 9 ft. (2.8 m) 1 — wall cap = 0 ft. (0 m) Length of 3-1/4" x 10" (8.3 cm x 25 cm) system = 14 ft. (4.3 m) 6 ft. (1.8 m) 3 ft. (0.93 m) 3-1/4" x 10" (8.3 cm x 25 cm) vent system Recommended vent system length Use 3 1/4" x 10" (8.3 cm x 25 cm) vent with maximum length of 26 feet (8 m) for vent system. For best performance, use no more than three 90° elbows. To calculate the length of system you need, add the equivalent feet (meters) for each vent piece used in the system. See the following example. Recommended standard fittings 3-1/4" x 10" (8.3 cm x 25 cm) 90° elbow = 5 ft. (1.5 m) 3-1/4" x 10" (8.3 cm x 25 cm) flat elbow = 12 ft. (3.7 m) 3-1/4" x 10" (8.3 cm x 25 cm) wall cap = 0 ft. (0 m)