Teac MCDV88 Operation & User’s Manual

Please read the owner’s manual carefully and ensure that you have followed the correct installation and operating procedures. 1. Please read this warranty card. 2. Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service. 3. If you require Warranty Service, please contact the TEAC Customer Support Hotline at 1300 553 315 for assistance. Please ensure that you have the model number, serial number and purchase receipt ready when you call. Please complete the section below and keep this information for your own records. Owner’s Name Owner’s Address Postcode Model Name/No. Serial No. Dealer’s Name Dealer’s Address Postcode Authorised Service Centres in Major Australian Cities NSW 151 Arthur Street Homebush West, NSW 2140 Queensland Unit 1, 320 Curtin Ave West Eagle Farm, QLD 4009 Western Australia Unit 2, 50 Pilbara Street Welshpool, WA 6106 South Australia 11 McInnes Street Ridleyton, SA 5008 Victoria 282 Normanby Road South Melbourne, VIC 3205 Thank you for selecting a TEAC product. If you should require assistance with your product regarding its setup or operation, or if any difficulties arise, please call us directly for advice between Monday to Friday at 8.30AM – 6PM AEST at the TEAC Customer Support Hotline 1300 553 315 [email protected] www.teac.com.au

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Warranty Terms & Conditions 1. TEAC warrants that this product is free from defects in material and workmanship under normal domestic use with reasonable care and skill. Maintenance and cleaning (i.e. laser head) is not covered by this warranty. The TEAC warranty only applies to TEAC products purchased, used and serviced in Australia. 2. The benefits to the consumer given by this Warranty are in addition to other rights and remedies of the consumer under a law in relation to goods or services to which the warranty relates, being the Australian Consumer Law. 3. Refund or replacement via your retailer is available for a period of 14 days after purchase for goods that have been inspected and determined to have a major failure. Refund and exchange is not applicable for change of mind. 4. Subject to the terms herein, this warranty effectively covers the equipment as specified in the Warranty Periods Table below from the date of purchase. TEAC PRODUCT WARRANTY PERIOD LED/LCD TV 32” (80 cm) and above 1 Year (In-Home Service/ Pick up Available)* All other TEAC products 1 Year (Carry-in Service) 5. This service will only be provided as part of this warranty if all the following conditions are met; In Home Service/Pick up* Service a) The product is indicated in the Warranty Period Table. b) The product is within the warranty period. c) The product is located within the normal service area of the local TEAC Authorised Service Centre. If TEAC determines that the product is not repairable on site, TEAC can complete the repair by taking the product to a TEAC Authorised Service Centre. Where In-Home service/Pick up* is not available, the purchaser is required to send the product to the nearest TEAC Authorised Service Centre for repair. In this event, proof of purchase is required to support a warranty claim. After the repair, the product will be available for collection by or return to the purchaser at a fee upon request. TEAC in- home service can be made available at a fee upon request. Carry-in Service 6. A 12-month replacement warranty is applicable to all Accessories such as Remote, Power Adaptors and Cables. 7. TEAC will ensure to the best of its abilities that all required parts are made available for any required service/repair. 8. TEAC Australia Pty Ltd and its Authorised Service Centres will use their best endeavours to complete product repairs within a reasonable period based on available resources and workload during the time when service is requested and performed. 9. Refurbished parts may be used to repair the product. In the case of a replacement, the product may be replaced, with a refurbished unit of the same type or, if one is unavailable, a similar refurbished model with equal or better features & specifications. 10. Please be advised that if the product presented for repair is capable of retaining user-generated data, the data may be lost during servicing. Customers are strongly encouraged to back up all important information/data before sending the product in for service/repair. 11. Service will be provided only during normal business hours and under safety conditions and circumstances. TEAC and its authorised service agents can refuse any repair if safety, in relation to OH&S, becomes a concern to its staff or authorised service agents’ personnel. 12. The warranty is void and warranty claims may be refused, subject to the Australian Consumer Law, if: a) The product was not transported, installed, operated or maintained according to manufacturer instruction, or b) The product was abused, damaged, tampered, altered or repaired by any unauthorised persons, or c) Product failure is due to accidents during use, installation or transit, power surges, use of defective or incompatible external devices, exposure to abnormal conditions such as excessive temperatures or humidity, or entry of liquids, objects or creatures into the product. 13. No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it, in connection with the sale of any equipment other than as stated in this warranty and outlined above. 14. TEAC reserves the right to inspect and verify whether the product is exhibiting a major failure as claimed by customers/retailers. 15. LCD dead pixel policy, please contact TEAC Customer Support Hotline on 1300 553 315 for assistance.

5 Connnection Of DVD and TV 6 Connnection Digital audio output 7 Sysstem connection 8 Panel overview

Cd ripping 22 12 13 12 12 14 15 16 MIC setup 20 Specifiation 24

[email protected] www.teac.com.au 1300553315 SD/MMC/MS 7"TFT PLAY/PAUSE/ AUTO SEARCH OPEN/CLOSE STANDBY DVD DOOR USB JACK SOURCE VOLUME NEXT/CH+ PREV/CH- CARD SLOT HEADPHONE JACK SCREEN User Manual FM Antenna Remote Control 2x AAA Batteries Contact Card AV Cable SOUND SOUND

CAUTION: Always disconnect units from power when making or changing any cable connections to avoid risk of electric shock. Unit Connection 1. Connect the SPEAKERS OUT R+ channel of the DVD player to the jack of the R+ jack on the right speaker, and the R- channel to the R- jack on the right speaker. 2. In the same way, connect the L+ and L- channels to the L+ and L- jacks on the left speaker. Remote Control Battery Installation 1. Open the battery compartment on the back of the remote control. 2. Insert 2x AAA batteries by matching the +/- polarities marked in the compartment. 3. Close the battery compartment. Note: To avoid leaking or cracking cells, install the batteries correctly according to polarity. Use the correct type of batteries. Batteries that look similar may differ in voltage. Always replace both batteries at the same time. Do not expose batteries to heat or flame. Remote Control Operating Range The remote control can be used up to approximately 5 meters straight ahead of the unit. It can also be operated at a horizontal angle up to 30o from the remote control sensor. If the remote control doesn’t operate properly: - Check the polarity of the installed batteries (+/-) - Check if the batteries are drained - Check if the remote control sensor is blocked by obstacles. - Check if there is any flourescent lighting, sunlight or other interferences nearby. Use this connection method to input audio and video from compatible external media players to be played on the DVD player’s LCD screen and its speakers. 1. Use a composite AV cable and connect the Audio L and R plugs to the DVD player’s AUDIO INPUT ML and MR jacks. 2. Connect the Video plug (yellow) to the DVD player’s VIDEO INPUT jack. 3. After connections are complete, turn on the unit and press the SOURCE button on the remote control to select AV input mode. CONNECTING EXTERNAL INPUTS AUDIO INPUT VIDEO INPUT VIDEO

the TV to AV input mode. 2. If your TV or screen has a S-Video jack, you can use 4-pin S-Video connectors to get a better quality picture as shown in . 3. For a more vivid picture, use AV wires to connect the YPbPr jacks according to in the figure below. CAUTION: Ensure that all units are turned off and disconnected from the AC power outlet before making or changing cable connections. 1. When watching discs in different video formats, adjust video format settings so that the formats match. (NTSC/PAL/AUTO) 2. If there are multiple connections between the DVD player and the TV, we recommend that one of them is selected and the rest are unplugged so that image and sound quality is not affected. 3. Do not switch the power on and off quickly in succession, please allow an interval of 3 seconds before switching the power on/off again. Option Option Option 3 CONNECTING VIDEO 6

Dolby Amplifier CONNECTING AUDIO AND FM Audio output Option 1 Audio output Option 2 FM connection CAUTION: Ensure that all units are turned off and disconnected from the AC power outlet before making or changing cable connections.

GOTO GOTO SUBTITLE COPY SUBTITLE/COPY FWD/SCAN+ REV/SCAN- SCAN+ SCAN- SOUND SOUND D Battery Installation 1. Open the battery compartment by taking out the battery cover. 2. Insert a 3V battery cell, making sure to match +/- polarities correctly. 3. Close the battery compartment securely. Note: Remove battery if the remote control is not used for a long time. Do not mix old and new batteries. D

SOURCE button. If you are using video output to a TV, turn on the TV and switch it to the correct input mode according to the connection type being used. DVD a logo (|<<) (>>|) (>>)scan+ (<<)scan- exit the screen saver. .if the screen saver turns on

GOTO title selection menu.The unit beginning of the disc digits or arrow navigation buttons GOTO

zoom options: 2x, 3x, 4x, 1/2x, 1/3, 1/4x, 1x. When zoomed in, use the arrow buttons to move the viewing frame. USB/CARD Press this button in DVD Mode to switch to USB/CARD playback. A compatible USB flash drive or SD/MMC/MS card containing compatible media files must be connected to use this feature. NOTE: Press the SOURCE button to enter DVD Mode. SOUND Press this button for sound balance adjustment. Press it repeatedly to cycle through the following: TREBLE, BASS, VOLUME. Use the volume +/- buttons to increase/decrease the settings. This option is in the PROGRAM menu and enables you to remove a highlighted chapter in the programmed list. playback speed Press this button to cycle through the following input sources: DVD/AV/FM. Note: The programmed list is not saved in memory when the disc is ejected or the unit is powered off

to select a desired (|<>|) Music File When a music data disc is loaded, to select a desired folder folder. file list to select a desired file After a Kodak Picture CD is loaded . to select a desired to select a desired display the current picture file formats After a JPEG CD is loaded .

Angle Mark On Osd L ang ENG Caption Off Screen Saver On Last Memory On Set Tv Display Mode Dolby Video Preference ● ● ● ● PS Wide ● General Audio General setup Page Closed Caplion Dolby Video Preference ● ● ● ● Off General Audio Dolby Video Preference Off Osd L ang Caption Tv Display General setup Page ● ● ● ● PS Angle Mark On ENG Off Screen Saver On On Set Angle Mark General Audio Tv Display Tv Display General setup Page Angle Mark Angle Mark On On Osd L ang Osd L ang ENG ENG Caption Off Screen Saver On Set Osd L anguage Dolby Video Preference ● ● ● ● PS PS English French German Spanish On Normal/Ps Normal/Lb 13 HDCD 1X Last Memory On D H CD 1X a L st Memory On HDCD 1X MP3 Lyric mode On MP3 Lyric mode On Caption Off Screen Saver On Last Memory On D H CD 1X MP3 Lyric mode On MP3 Lyric mode On MENU SETUP

General selup Page Screen Saver Dolby Dolby Video Video Preference Preference ● ● ● ● ● ● ● ● On On Off Off Video Preference Spdif Setup General Audio Audio Setup Page Go To Speaker Setup Page Dolby ● ● ● ● Video Preference Spdif Off General Audio DIGITAL AUDIO SETUP PAGE Spdif Output Setup Spdif Dolby Spdif/Raw Spdif/Pcm Tv Display Tv Display Angle Mark Angle Mark On On Osd L ang Osd L ang ENG ENG Caption Caption Off Off Screen Saver Screen Saver On On Last Momory Last Momory On PS PS 14 When the power is cut off suddenly,DVD player can remember what it is displaying. After DVD player has power again, it can contiune to display beginning from its memory; F.Last Memory Last Memory On HDCD 1X E.HDCD High definition compatible digital cd. 2X General Audio General selup Page Dolby Video Preference ● ● ● ● Tv Display Angle Mark On Osd L ang ENG Caption Off Screen Saver On PS Last Memory On HDCD 1X HDCD HDCD 1X 1X Off MP3 Lyric mode On MP3 Lyric mode On MP3 Lyric mode On K araoke Setup Lpcm Out 48 k

Dolby ● ● ● Dolby Digital Setup Dual Mono Dynamic Stereo L-Mono R-Mono Mix-Mono ● ● ● ● Dolby Digital Setup Video Preference General Audio Dynamic Set Drc Off Dolby Dual Mono FULL 3/4 1/2 1/4 Off 15 Preference General Audio Sharpness Dolby ● ● ● ● Video High Middle Low Preference General Audio Brighhtness Dolby ● ● ● ● Video Preference General Audio Tv Mode Dolby ● ● ● ● Video P-Scen I NTE RFACE Preference General Audio Brightness Brightness Component Dolby ● ● ● ● Video Video Setup Page Video Setup Page Video Setup Page Video Setup Page Component Component TV Mode TV Mode TV Mode Shar pness Sharpness Contrast Contrast 00 00 Mid YUV YUV S-video Quality Quality Camma Hue Saruration None 00 00 00 00 Camma Hue Saruration None 00 00 S-video Mid

Brightness Shar Pness Contrast OO OO Low Contrast ● ● ● ● Video Setup Page General Audio Dolby Preference Video General Audio Brightness Dolby Preference Video Brightness 0 General Audio Dolby Preference Video Contrast 0 Contrast 16 Camma Hue Saruration None 00 00 Preference General Audio Dolby ● ● ● ● Video High Middle Low Brightness Video Setup Page Shar pness Contrast Low Camma Hue Saruration None 00 00 00 00 F Camma Camma None Camma Brightness Shar Pness Contrast OO OO Low Contrast ● ● ● ● Video Setup Page General Audio Dolby Preference Video General Audio Dolby Preference Video Camma Hue Saruration None 00 00 G Hue Hue Hue 0 Hue H.Saruration Saruration operating to regulate the operation and HUE

Password Page Dolby Preference Video English French Spanish Chinese Japanese K orean Portuguese ● ● ● ● General Preferred Menu L anguage Password Page Audio Dolby Preference Video ● ● ● ● General Preferred Subtitle Language Password Page Audio Dolby Preference Video ● ● ● ● General Set Tv Standard Password Page Audio Dolby Preference Video PAL Multi NTSC Disc Menu Disc Menu Disc Menu Disc Menu TV Type TV Type TV Type TV Type Audio Audio Audio Audio Subtitle Subtitle Subtitle Subtitle Password Password Password Password Default Default Default Default Parental Parental Parental Parental ENG ENG ENG ENG ENG ENG ENG ENG ENG ENG ENG ENG PAL PAL PAL PAL English French Spanish Chinese Japanese English French Spanish Chinese Japanese 17 R ussian K orean Portuguese R ussian K orean Portuguese R ussian

5 Pgr 6 R 7 Nc 17 8 Adutl ● ● ● ● General Set Parental Control Password Page Audio Dolby Preference Video 1 Kid Saf 2 G 3 Pg ● ● ● ● General Change Possword Password Page Audio Dolby Preference Video ● ● ● ● General Load Factory Setting Password Page Audio Dolby Preference Video Reset General Audio Dolby Preference Video Old Password New Password Confirm Pwd ok Disc Menu Disc Menu Disc Menu TV Type TV Type TV Type Audio Audio Audio Subtitle Subtitle Subtitle Password Password Password Default Default Default Parental Parental Parental ENG ENG ENG ENG ENG ENG ENG ENG ENG PAL PAL PAL 18 ● ● ● ● General Password Mode Password Setup Page . . Audio Dolby Preference Video Password Mode On Off Password

1. The source CD (Audio CD, AVI,XVID) must be in good condition and not scratched or warped. The DVD player should be able to play it smoothly. 2. The destination USB flash drive must be compatible with the DVD player (up to 16GB, formatted in FAT/FAT32 file system). 1. In DVD Mode, load and play the CD. 2. Plug the destination USB flash drive into the unit. 3. Press the COPY button on the remote control to display the CD ripping menu on the screen. (FIGURE 1) 4. Adjust your CD ripping preferences by using the arrow buttons and ENTER button: - Speed: Ripping speed. FAST mode rips quicker but the audio will not be played. - Bitrate: Higher bitrate gives better quality audio but larger files. - Create ID3: Choose whether to have ID3 tags attached to the ripped files. - Device: Displays the connected memory device. 5. Highlight and press ENTER to select the desired tracks. "Select All" will select all the tracks. "Select None" will uncheck all the tracks. 6. After the track selection, select the "Start" option to start ripping. The ripping progress screen will display. (FIGURE 2) 7. After ripping is complete, select "Exit" to quit the CD ripping menu. 8.To stop ripping while it is in progress, select the "Cancel" option. VIDEO FILE COPY 1. In DVD Mode, load and play the AVI/XVID CD. 2. Plug the destination USB flash drive into the unit. 3. Press the COPY button on the remote control to display the video copy menu on the screen. (FIGURE 3) 4 or deselect all tracks select 5. After the track selection, select the "Copy" option to proceed. Adjust settings if needed, then proceed again to start the copy function. (FIGURE 4 & 5) 6. To stop copying while it is in progress, select the "Cancel" option. if needed to view further down the track list. 19 Move the cursor to the video file you'd like to copy and

Karaoke setup General Audio Speaker Setup Page Go t o k araoke setup p age Dolby ● ● ● ● Video Preference MIC setup MIC Threshold General Audio Karaoke Setup Page Go t o MIC setup p age Dolby ● ● ● ● Video Video Video Video Preference Preference Preference Preference MIC on MIC on MIC on MIC on MIC VOL 1 15 MIC VOL 1 15 MIC VOL 1 15 MIC VOL 1 15 Echo L evel 15 Echo L evel 15 Echo L evel 15 Echo L evel 15 General General General General Audio Audio Audio Audio Micphone Setup Micphone Setup Micphone Setup Micphone Setup MIC VOL 1 MIC VOL 1 Echo L evel Echo L evel Dolby Dolby Dolby Dolby ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Video Preference MIC off MIC VOL 1 15 Echo L evel 15 General Audio Micphone Setup MIC Dolby ● ● ● ● on off MIC SETUP

SCAN+/- buttons to tune manually. 1.The FM receiving frequency range of this unit is 87.5MHz-108MHz 2.When the unit is in the DVD mode,press the source key to switch to the FM mode,Press the AUTO SEARCH key on the remote control,then the system automatically searches and stores 1 to 20 channels one by one . NOTE: This unit stores FM channels during auto tune only. AUTO TUNE MANUAL TUNE FINE POSITION 1 90.80 FM TV SETUP FUNCTION Image Adjustment Up and down arrow keys to move the option to reverse left and right keys to adjust the option The proportion of video output and reset options Up and down arrow keys to move the option to reverse left and right keys to adjust the option The regulation of the TV norm Up and down arrow keys to move the option to reverse left and right keys to adjust the option Time adjustment Up and down arrow keys to move the option to reverse left and right keys to adjust the option

Dimensions Main unit: 190 x 210 x 275 mm Speaker: 140 x 215 x 260 mm Weight Net: 7 kg Gross: 8 kg INPUT DVD Player Supports DVD, DVD+RW, VCD, CD, CD-R, CD-RW, MP3, HDCD, WMA, JPEG Frequency response: 20Hz – 20kHz (±3dB) Audio S/N: >80dB Horizontal definition: 500(TV) Video type: DVD (MPEG2), VCD (MPEG1) Audio Type: MPEG1, MPEG2, PCM, Stereo Analogue audio output Digital audio output Video output YUV output (Y.Cb.Cr) - Electric level output: 1.0-2.0vp-p - Resistance: 10k - Electric level output: 0.5vp-p - Resistance: 75 - Electric level output: 1.0vp-p - Resistance: 75 - Electric level output: 0.7vp-p - Resistance: 75 FM Tuner Frequency range: 87.5MHz – 108MHz USB Version 2.0, supports AVI, MP3, WMA, JPEG CARD 3 in 1 reader, supports SD/MS/MMC memory cards OUTPUT Amplifier Output power: 20W + 20W Bass: 0dB~+15dB Treble: 0dB~+15dB Frequency response: 20Hz-20KHz ±3dB S/N ratio: >80dB Speaker 2-channel stereo 1x 4” subwoofer, 1x 1.5” treble 2-way shielded Sensitivity: 88dB(±2dB) Impedance: 6 LCD Panel 7” TFT Panel [05CT12] * Specifications are subject to change without notice. * Weight and dimensions are approximate.