Kramer TP-102HD Operation & User’s Manual

3 3.2 Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP) 3 3.3 About the TP-102HD 4 3.4 Recommendations for Achieving the Best Performance 4 4 Your TP-102HD XGA / HD Line Transmitter / DA 5 5 Configuring a 1:2 XGA / HD-to-Twisted Pair DA System 7 5.1 Wiring the CAT5 LINE IN / LINE OUT RJ-45 Connectors 9 6 Technical Specifications 10 Figures Figure 1: TP-102HD XGA / HD Line Transmitter / DA 5 Figure 2: TP-102HD (Top Side Panel) 5 Figure 3: TP-102HD (Lower Side Panel) 5 Figure 4: TP-102HD (Underside Panel) 6 Figure 5: Configuring a 1:2 XGA / HD to Twisted Pair Transmitter / Receiver / DA 8 Figure 6: CAT5 PINOUT 9 Tables Table 1: TP-102HD XGA / HD Line Transmitter / DA Features 6 Table 2: TP-102HD (Underside Panel) Features 6 Table 3: CAT5 PINOUT 9 Table 4: Technical Specifications of the TP-102HD (with 100m CAT5 cable) 10

affordable solutions to the infinite range of problems that confront the video, audio and presentation professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 500-plus different models now appear in 8 Groups1, which are clearly defined by function. Congratulations on purchasing your Kramer TOOLS: TP-102HD XGA / HD Line Transmitter / DA, which is ideal for: �� Presentation and multimedia applications �� Long range graphics distribution for schools, hospitals, security, and stores The package includes the following: �� TP-102HD XGA / HD Line Transmitter / DA �� Power adapter (12V DC Input) �� This user manual2 2 Getting Started We recommend that you: �� Unpack the equipment carefully and save the original box and packaging materials for possible future shipment �� Review the contents of this user manual �� Use Kramer high performance high resolution cables3 1 GROUP 1: Distribution Amplifiers; GROUP 2: Video and Audio Switchers, Matrix Switchers and Controllers; GROUP 3: Video, Audio, VGA/XGA Processors; GROUP 4: Interfaces and Sync Processors; GROUP 5: Twisted Pair Interfaces; GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors 2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com 3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com

Getting Started 2 2.1 Quick Start This quick start chart summarizes the basic setup and operation steps.

�� The power connect feature, see section �3.1 �� Using shielded twisted pair (STP) / unshielded twisted pair (UTP), see section �3.2 �� A summary of the TP-102HD, see section �3.3 �� Recommendations for achieving the best performance, see section �3.4 3.1 About the Power Connect Feature The Power Connect feature lets you power a transmitter / receiver system by connecting just one power adapter— to either the transmitter or the receiver. The other unit is fed via the cable connecting between the transmitter/receiver. The Power Connect feature applies as long as the cable can carry power. The distance does not exceed 50 meters on standard CAT5 cable, for longer distances, heavy gauge cable should be used1. For a CAT5 cable exceeding a distance of 50 meters, separate power supplies should be connected to the transmitter and to the receiver simultaneously. 3.2 Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP) The decision whether to use shielded twisted pair (STP) cable or unshielded twisted pair (UTP) cable depends on the nature of the application. It is recommended that in applications with high interference, shielded twisted pair (STP) cable is used. However, the shield itself does create a capacitance that degrades the frequency response of the machines. For shorter distances, of 50m or so, shielded twisted pair (STP) cable is preferred because it provides protection from interference (degradation is not apparent). For long range applications, unshielded twisted pair (UTP) cable is preferred. However, the unshielded twisted pair (UTP) cable should be installed far away from electric cables, motors and so on, which are prone to create electrical interference. 1 CAT5 cable is still suitable for the video/audio transmission, but not for feeding the power at these distances

Overview 4 3.3 About the TP-102HD Your Kramer TOOLS TP-102HD XGA / HD Line Transmitter / DA: �� Receives a computer graphics1 / HD2 signal and transmits it over two CAT5 cables to appropriate receivers3 �� Has a video bandwidth of 150MHz, with a transmission range of more than 300 ft. (more than 100 meters) �� Includes the Power Connect feature �� Is 12VDC fed 3.4 Recommendations for Achieving the Best Performance Achieving the best performance means: �� Connecting only good quality connection cables, thus avoiding interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables) �� Avoiding interference from neighboring electrical appliances that may adversely influence signal quality, and positioning your TP-102HD away from moisture, excessive sunlight and dust Caution – No operator-serviceable parts inside unit. Warning – Use only the Kramer Electronics input power wall adapter that is provided with this unit4. Warning – Disconnect power and unplug unit from wall before installing or removing device or servicing unit. 1 The terminology XGA is used throughout this manual, where this implies any RGBHV signal on an HD15 connector having a resolution from VGA up to UXGA 2 The TP-102HD accepts high definition resolutions: 480p, 576p, 720p, 1080i, and 1080p 3 Note that the CAT5 connectors exclude audio 4 For example: model number AD2512C, part number 2535-000251

5 4 Your TP-102HD XGA / HD Line Transmitter / DA Figure 1, Figure 2, Figure 3 and Table 1 define the TP-102HD: Figure 1: TP-102HD XGA / HD Line Transmitter / DA Figure 2: TP-102HD (Top Side Panel) Figure 3: TP-102HD (Lower Side Panel)

Your TP-102HD XGA / HD Line Transmitter / DA 6 Table 1: TP-102HD XGA / HD Line Transmitter / DA Features # Feature Function 1 12V DC +12V DC connector for powering the unit 2 LINE OUT 2 RJ-45 Connector Connects to1 the LINE IN RJ-45 connector on the (second) TP-120 XGA Line Receiver2 3 LINE OUT 1 RJ-45 Connector Connects to1 the LINE IN RJ-45 connector on the (first) TP-120 XGA Line Receiver2 4 XGA IN HD15F Connector Connect to the XGA source 5 ON LED Illuminates when receiving power Figure 4 and Table 2 define the TP-102HD underside panel: Figure 4: TP-102HD (Underside Panel) Table 2: TP-102HD (Underside Panel) Features # Feature Function 1 VS Switch Slide the switch to the left (to NORMAL) to retain the polarity; slide the switch to the right3 to change the VS polarity to NEGATIVE polarity4 2 HS Switch Slide the switch to the left (to NORMAL) to retain the polarity; slide the switch to the right3 to change the HS polarity to NEGATIVE polarity4 1 Using a UTP CAT5 cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 3 and Figure 6) 2 Refer to the separate user manual: PT-110, PT-120, TP-120, WP-110, which can be downloaded from the Internet at this URL: http://www.kramerelectronics.com. Also, see the example illustrated in Figure 5 3 By default, both switches are set to the left 4 Downgoing syncs

7 5 Configuring a 1:2 XGA / HD-to-Twisted Pair DA System You can use the TP-102HD XGA / HD Line Transmitter / DA with two TP-120 XGA Line Receiver units1 to configure a 1:2 XGA / HD-to-Twisted Pair DA system. This will let you transmit a computer graphics / HD signal to two displays via long line CAT5 UTP cabling. To connect the TP-102HD to two TP-120 units, as the example in Figure 5 illustrates, do the following: 1. On the TP-102HD, connect the XGA / HD source (for example, a computer graphics / HD source) to the XGA IN HD15F connector, and connect the line output RJ-45 connector2: �� OUT 1 connector to the LINE IN RJ-45 connector on the first TP-120 �� OUT 2 connector to the LINE IN RJ-45 connector on the second TP-120 2. On the two TP-120 units, connect the: �� XGA OUT HD15F connector of the first TP-120 unit to the XGA / HD acceptor (for example, Display 1) �� XGA OUT HD15F connector of the second TP-120 unit to the XGA / HD acceptor (for example, Display 2) 3. On each of the three Kramer TOOLS, connect the 12V DC power adapter to the power socket and connect the adapter to the mains electricity. The signal from the XGA source is transmitted via the two CAT5 cables, decoded and converted at the each of the XGA OUT HD15F connectors to the XGA acceptors. 4. On the TP-120 units, if necessary: �� Set the H SYNC and V SYNC switches3 on the underside �� Adjust4 the video output signal level and/or cable compensation equalization level 5. On the TP-102HD, if necessary, set the VS and HS switches5 on the underside 1 Refer to the separate user manual: PT-110, PT-120, TP-120, WP-110, which can be downloaded from the Internet at this URL: http://www.kramerelectronics.com 2 Via UTP cabling (with a range of more than 300ft (>100m)). For details of how to wire a CAT5 LINE IN / LINE OUT RJ-45 connector, see section �5.1 3 By default, both switches are set down (for negative V SYNC and H SYNC polarity) 4 Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level 5 By default, both switches are set to the left (to NORMAL) to retain the V SYNC and H SYNC polarity

Configuring a 1:2 XGA / HD-to-Twisted Pair DA System 8 Figure 5: Configuring a 1:2 XGA / HD to Twisted Pair Transmitter / Receiver / DA

9 5.1 Wiring the CAT5 LINE IN / LINE OUT RJ-45 Connectors Table 3 and Figure 6 define the UTP CAT5 PINOUT, using a straight pin to pin cable with RJ-45 connectors: Table 3: CAT5 PINOUT EIA /TIA 568A EIA /TIA 568B PIN Wire Color PIN Wire Color 1 Green / White 1 Orange / White 2 Green 2 Orange 3 Orange / White 3 Green / White 4 Blue 4 Blue 5 Blue / White 5 Blue / White 6 Orange 6 Green 7 Brown / White 7 Brown / White 8 Brown 8 Brown Pair 1 4 and 5 Pair 1 4 and 5 Pair 2 3 and 6 Pair 2 1 and 2 Pair 3 1 and 2 Pair 3 3 and 6 Pair 4 7 and 8 Pair 4 7 and 8 Figure 6: CAT5 PINOUT

Technical Specifications 10 6 Technical Specifications Table 4 includes the technical specifications1 of the TP-102HD. Table 4: Technical Specifications of the TP-102HD (with 100m CAT5 cable) INPUT: 1 XGA / HD on an HD15F connector OUTPUTS: 2 RJ-45 OUT connectors MAX. OUTPUT LEVEL: 1.7Vpp HIGHEST RESOLUTION2: UXGA, 1080P DIFF. GAIN2: 0.75% DIFF. PHASE2: 0.05 Deg. K-FACTOR2: 0.1% S/N RATIO2: 73dB CONTROLS2: 2 switches for sync inversion COUPLING2: AC POWER SOURCE: 12 VDC 447mA3 DIMENSIONS: 12cm x 7.15cm x 2.76cm (4.7" x 2.8" x 1.08"), W, D, H WEIGHT: 0.3 kg. (0.67 lbs.) approx. ACCESSORIES: Power supply 1 Specifications are subject to change without notice 2 For the TP-102HD Transmitter/ TP-120 Receiver SETUP 3 Sufficient for feeding two receivers via CAT5

following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered by the warranty: 1. Any product which is not distributed by Kramer, or which is not purchased from an authorized Kramer dealer. If you are uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the web site www.kramerelectronics.com. 2. Any product, on which the serial number has been defaced, modified or removed. 3. Damage, deterioration or malfunction resulting from: i) Accident, misuse, abuse, neglect, fire, water, lightning or other acts of nature ii) Product modification, or failure to follow instructions supplied with the product iii) Repair or attempted repair by anyone not authorized by Kramer iv) Any shipment of the product (claims must be presented to the carrier) v) Removal or installation of the product vi) Any other cause, which does not relate to a product defect vii) Cartons, equipment enclosures, cables or accessories used in conjunction with the product WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR We will pay labor and material expenses for covered items. We will not pay for the following: 1. Removal or installations charges. 2. Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are the responsibility of the Kramer dealer from whom the product was purchased. 3. Shipping charges. HOW YOU CAN GET WARRANTY SERVICE 1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center. 2. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty coverage, and should be included in any shipment of the product. Please also include in any mailing a contact name, company, address, and a description of the problem(s). 3. For the name of the nearest Kramer authorized service center, consult your authorized dealer. LIMITATION OF IMPLIED WARRANTIES All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to the length of this warranty. EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: 1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss; or: 2. Any other damages, whether incidental, consequential or otherwise. Some countries may not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from place to place. NOTE: All products returned to Kramer for service must have prior approval. This may be obtained from your dealer. This equipment has been tested to determine compliance with the requirements of: EN-50081: "Electromagnetic compatibility (EMC); generic emission standard. Part 1: Residential, commercial and light industry" EN-50082: "Electromagnetic compatibility (EMC) generic immunity standard. Part 1: Residential, commercial and light industry environment". CFR-47: FCC Rules and Regulations: Part 15: “Radio frequency devices Subpart B – Unintentional radiators” CAUTION! ��Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the equipment. ��Use the supplied DC power supply to feed power to the machine. ��Please use recommended interconnection cables to connect the machine to other components.

Web site: www.kramerelectronics.com E-mail: [email protected] P/N: 2900-000235 REV 1 For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Caution Safety Warning: Disconnect the unit from the power supply before opening/servicing.