TECHVIEW QV-3048 Operation & User’s Manual

SAFETY INSTRUCTION .................................................................................................................................................... 3 CHAPTER 1 FEATURES AND FUNCTIONS ................................................................................................................... 1 CHAPTER 2: OVERVIEW .................................................................................................................................................. 2 2.1 FRONT PANEL ........................................................................................................................................................................... 2 2.1、4-CH DVR Front Panel ............................................................................................................................................. 2 2.2REAR PANEL ............................................................................................................................................................................. 2 2.2、4-CH DVR Rear Panel ........................................................................................................................................... 2 2.3 4CH REMOTE CONTROLLER ...................................................................................................................................................... 3 CHAPTER 3 DVRCONNECTION ...................................................................................................................................... 5 3.1 HDD INSTALLATION ................................................................................................................................................................... 5 3.2 CAMERA AND MONITOR CONNECTION .......................................................................................................................................... 5 3.3 POWER SUPPLY CONNECTION ...................................................................................................................................................... 5 CHAPTER 4: DVR BOOT UP ............................................................................................................................................ 5 4.1 SYSTEM INITIALIZATION .............................................................................................................................................................. 5 4.2 LIVE INTERFACE ........................................................................................................................................................................ 6 CHAPTER 5: DVR MENU .................................................................................................................................................. 6 5.1MAIN MENU GUIDE .................................................................................................................................................................. 7 5.2MAIN MENU ............................................................................................................................................................................ 8 5.2.1. Display ....................................................................................................................................................................... 8 5.2.1.1 Live mode................................................................................................................................................................................... 8 5.2.1.2 Output mode ............................................................................................................................................................................. 8 5.2.1.3 Privacy Zone ............................................................................................................................................................................. 10 5.2.2 Record set ................................................................................................................................................................ 10 5.2.2.1 Record parameters ................................................................................................................................................................... 10 5.2.2.2 Schedule .................................................................................................................................................................................. 10 5.2.2.3 Main Stream ............................................................................................................................................................................ 11 5.2.3 Search ...................................................................................................................................................................... 11 5.2.3.1 Record Search .......................................................................................................................................................................... 11 5.2.3.2 Channel Select ......................................................................................................................................................................... 12 5.2.3.3 Time Axis setup, file clip and zoom in/out ............................................................................................................................... 12 5.2.3.4Event Search ............................................................................................................................................................................. 13 5.2.3.5 Log Search ................................................................................................................................................................................ 14 5.2.4 Network .................................................................................................................................................................... 14 5.2.4.1 Network set ............................................................................................................................................................................. 14 5.2.4.2 Mobile Set ................................................................................................................................................................................ 15 5.2.4.3Router’s Port Forwarding .......................................................................................................................................................... 16 5.2.4.4 Sub stream ............................................................................................................................................................................... 16 5.2.4.5 Email set .................................................................................................................................................................................. 16 5.2.4.6DDNS Set ................................................................................................................................................................................... 17 5.2.5 Alarm ......................................................................................................................................................................... 17

5.2.6 Device ....................................................................................................................................................................... 18 5.2.6.1 HDD Set .................................................................................................................................................................................... 18 5.2.7 System ...................................................................................................................................................................... 19 5.2.7.1 General .................................................................................................................................................................................... 19 5.2.7.2Users ......................................................................................................................................................................................... 20 5.2.7.3 Information .............................................................................................................................................................................. 21 5.2.8 Advanced ................................................................................................................................................................. 21 5.2.8.1 Maintain ................................................................................................................................................................................... 21 5.2.8.2 Event ........................................................................................................................................................................................ 21 5.3MENU LOCK ........................................................................................................................................................................... 22 5.4SPLIT MODE ............................................................................................................................................................................ 22 5.5 PIP MODE ............................................................................................................................................................................ 22 5.6 RECORD SEARCH ..................................................................................................................................................................... 22 5.7 MUTE ................................................................................................................................................................................... 22 5.8 MANUAL RECORD ................................................................................................................................................................... 22 5.9 STOP RECORD ......................................................................................................................................................................... 22 5.10 START SEQUENCE .................................................................................................................................................................. 22 CHAPTER 6: WEB APPLICATION MANAGER .......................................................................................................................... 23 6.1ACTIVEX CONTROL DOWNLOAD AND INSTALLATION ......................................................................................................................... 23 6.2 WEB APPLICATION MANAGER LOG-IN......................................................................................................................................... 24 6.3 LIVE INTERFACE ....................................................................................................................................................................... 24 6.3.1 Menu Bar .................................................................................................................................................................. 24 6.3.1.1 Live Display .............................................................................................................................................................................. 24 6.3.1.2 Video control ........................................................................................................................................................................... 25 6.3.2 Playback ................................................................................................................................................................... 26 6.3.2.1 Record search .......................................................................................................................................................................... 26 6.3.2.2 Playback control ....................................................................................................................................................................... 27 6.3.3 Configuration ........................................................................................................................................................... 28 6.3.3.1 Display Configuration ............................................................................................................................................................... 28 6.3.3.2 Record ...................................................................................................................................................................................... 29 6.3.3.3 Network Parameters ................................................................................................................................................................ 29 6.3.3.4Alarn ......................................................................................................................................................................................... 30 6.3.3.5 Device ...................................................................................................................................................................................... 31 6.3.3.6 System...................................................................................................................................................................................... 31 6.3.3.7 Advanced ................................................................................................................................................................................. 32 6.3.4 Local setting............................................................................................................................................................. 33 6.3.5 Logout ....................................................................................................................................................................... 33 CHAPTER 7: APPENDIX ................................................................................................................................................. 34 7.1 TROUBLESHOOTING ................................................................................................................................................................. 34 7.2USAGE MAINTENANCE ............................................................................................................................................................. 34 7.3ACCESSORIES .......................................................................................................................................................................... 35

All the safety and operating instruction should be read before the equipment is operated. 2. Power sources This equipment should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power, please consult your equipment dealer. 3. Objects and Liquid Never push objects of any kind through openings of this equipment and / or spill liquid of any kind on the equipment as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. 4. Water and / or Moisture Do not use this equipment near water or in contact with water. 5. Heat sources Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifier) that produce heat. 6. Dusty field Never use this equipment near dusty or intense magnetic field. 7. Cleaning Unplug this equipment from the wall outlet before cleaning it. Do not use liquid aerosol cleaners. Use a damp soft cloth for cleaning. 8. Lightning Unplug this equipment during lightning storm or when unused for long periods of time. 9. Accessories Do not place this equipment on an unstable cart, stand or table. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over. 10. Moving Disconnect the power before moving the equipment. And the equipment should be moved with care. 11. Attachment Never add any attachments and/or equipment without the approval of the manufacturer as such additions may result in the risk of fire, electric shock and other personal injury. 12. Correct Batteries Risk of explosion occurs if battery is replaced by an incorrect type. Therefore you must use the same type of battery as the one being used in the product. 13. Ventilation. Do not block any ventilation openings, installation of the equipment in the rack should be such that the amount of airflow required for safe operation of the equipment is not compromised. 14. Overloading Do not overload wall outlets and extension cords to avoid the risk of fire or electric shock. 15. Reliable Earthlings (Grounding) Reliable grounding of rack mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit.

Features：
H. 264 video compression format; supports 1080P resolution;
G.711 audio compression format; Windows Graphical interface; embedded real-time Linux2.6 operation system;
Friendly Menu reminder;
Multiple operation modes (Preview, record, playback, backup, network surveillance and mobile phone monitoring);
Supports Double Streaming network transmission;
Supports remote live surveillance via smart mobile phone;
Supports Zoom in/out and sequence function;
The video package time is adjustable;
Multiple alarm record modes;
Rear USB2.0 ports for back-up, recorder, upgrade and mouse operation;
With IR remote control operation;
Multiple language OSD;
Support auto-maintain. Function Brief and Description Real time monitoring Double video output; with monitor, VGA virtual output port or HDMI Output; Support net-viewer and MP live surveillance and also support zoom in/out, auto sequence and PIP display. Record H.264 video compression format; record quality/resolution/frame rate adjustable, multiple record modes (Always, Scheduled, Manual, Alarm, Motion detection and remote record) Record storage Support SATA large capacity HDD and save real-time record image to HDD. Playback Support DVR single CH and multiple CH Search/Playback of recorded files. Backup Support DVR backup via USB flash drive, removable drive, Recorder and network. Alarm Setting Supports HDD & video input alarm management and external alarm signal inputs. Network operation Supports remote surveillance by authority users to increase system security. Mouse Operation Supports Mouse operation for faster menu navigation. List 1-1

2.1 Front Panel Reminder: DVR is the abbreviation of Digital Video Recorder Equipment. 2.1、 、 、 、4-CH DVR Front Panel 2.2Rear Panel 2.2、 、 、 、4-CH DVR Rear Panel Item Physical port Connection method 1 Video input Connect CH1-4 (Virtual) video input device（BNC interface） 2 Audio Output Audio output (RCA interface）; 3 Audio Input audio input (RCA interface）; 4 Video output Connect monitor output(BNC interface) 5 VGA Port Connect to VGA monitor, such as PC monitor (Optional) 6 HDMI Port Connect to HDMI monitor 7 USB Port Connect USB device (Flash Drive, Hard Drive and Recorder etc) 8 Power Port Connect power supply - DC12V 2A 9 Ethernet: Port Connect LAN, Ethernet (RJ45 interface) Item Key title or Indicator Remark Function & Description 1 IR Receiver PWR If the “Green” indicator is on the system is getting power normally. 2 Power Indicator Receives IR signal from Remote Controller 3 HDD Indicator HDD When the “Red” indicator flashes it means the hard drive is being read or written to.

Item Key title Key function 1 1-8 Channel select 1-8; Numeric key 2 9、0 Numeric key; Clicking numeric “0” allow you switch to output device 3 ALL Multiple display mode 4 Menu Enter into Main menu/Exit 5 ▲ Up arrow key, Volume adjust 6 ▼ Down arrow key, Volume adjust 7 ◄/ Left/Down key, Decrease/increase parameter value of control bar 8 SEL Select key/Edit key; selected operation. 9 Rewind key 10 Enter into record search menu; Play key 11 Forward key 12 ● Record key 13 Pause/Sequence key 14 ■ Stop manual record; stop playing 15 Audio Testing 16 Mute Mute on/off

operation. TYPE Function Click left key of Mouse In menu lock mode, Enter into pop-up menu and clicking any sub menu to pop up Log-in window; on menu unlock mode, enter into pop-up menu, and then clicking left key to enter into any sub menu directly. After entering into main menu, clicking left key could enter into any sub menu; On [Detailed file] menu mode, clicking left key could playback one recording file. Change the status of check box and motion detection area. Clicking combo box to access pull-down menu; Click left key to stop dwell time display when dwell time display is activated. By clicking left key you can adjust Color control bar and volume control bar. Clicking combo box to access pull-down menu By clicking left key you can select values in edit boxes or pull-down menu and supports Chinese word input, special symbol, numeric and character input, use instead of [Enter- ] or [Backspace ] Click right key of Mouse In live display mode, clicking right key will display pop-up menu (shown as Picture 5-1). In Main menu or sub menu mode, clicking right key will exit current menu. Double-click Left key of Mouse In live display or playback mode, double-clicking left key will maximize the screen. Moving Mouse Select menu item Sliding Mouse On motion mode, sliding mouse will select motion area; On [Color set] menu mode, sliding mouse will adjust color control bar and volume control bar.

3.1 HDD Installation Caution： ： ： ： Please do not Install or take out hard drive when DVR is running! HDD Installation:： (1) Cut power firstly, and then remove screws and open DVR upper cover carefully; (2) Insert Power Cord and data cable into Pin of hard drive securely; (3) Remove the screws on the HDD bracket; fix the HDD to the bracket and then fix the bracket with HDD to DVR body; (4) Put the upper cover back carefully, re-attach screws. Note: If user requires higher performance HDD, strongly recommend you use special hard driver for security and protection. 3.2 Camera and Monitor Connection Connect camera cable to video input of DVR, and from video output of DVR to Monitor via BNC connector (Refer to section2.2-Rear Panel); or 3.3 Power Supply connection After power on please make sure the video I/O connection well, audio device with BNC cable. Chapter 4: DVR Boot up 4.1 System Initialization After connecting the Power cable of DVR to wall outlet and pressing the Power button on the front panel, you will enter into the system initializing screen shown as Picture 4-1 Picture 4-1

After finishing initialization the system will enter into Once there are video inputs, the screen mouse to double-click the live image of any channel, the image will be maximized to full screen, by double-clicking again, image will be come back to will enter into Pop-up Menu;clicking the left button of themouse anyarea outside the menu allows you Note:When internal HDD is not connected or an error occurs, the character “H” will appear on the first channel of the live screen and accompany buzzer alarm. If you want to close the buzzer alarm, please enter into [Main menuAlarm] to set HDD loss, HDD space not enough and alarm output to “off” Pop-up Menu Picture 5-1 6 After finishing initialization the system will enter into screen. which is showing no video input status. screen will display live images from the cameras.In click the live image of any channel, the image will be maximized to full screen, by ill be come back to 16-split displaymode; clicking the right button of the mouse Menu;clicking the left button of themouse allows you select menu items; allows you exit the Pop-up menu. When internal HDD is not connected or an error occurs, the character “H” will appear on the first the live screen and accompany buzzer alarm. If you want to close the buzzer alarm, please enter Alarm] to set HDD loss, HDD space not enough and alarm output to “off” Chapter 5: DVR Menu After finishing system initialization, click right key of mouse on main interface mode to enter into Pop-up Menu. Now you could perform setting and operate on Main Menu, Multi Zoom in/out, Rec. Search,Manual record, Sequence, PIP, and Vo Switch etc. Clicking [0] key on the remote controller or holding press [Esc] key on the front panel could switch system to other output device. User Manual . which is showing no video input status. will display live images from the cameras.In Live mode, if you use the click the live image of any channel, the image will be maximized to full screen, by ; clicking the right button of the mouse you select menu items; and clicking When internal HDD is not connected or an error occurs, the character “H” will appear on the first the live screen and accompany buzzer alarm. If you want to close the buzzer alarm, please enter Alarm] to set HDD loss, HDD space not enough and alarm output to “off” After finishing system initialization, click right key of mouse on main interface mode to enter into perform parameter Main Menu, Multi-Pics,, Search,Manual record, etc. Clicking [0] key on the remote controller or holding press [Esc] key on the front panel could switch system to other output device.

Record Playback Search Record Search Event Search Backup Log search Display Output Set Main Menu Live set Privacy Zone Clip Set Record Parameters Schedule Main Stream Record Sub stream Network Set Email Set Mobile Set DDNS Set Network Maintain Advanced Event System Users System Information General Device HDD Motion Detection Alarm

Go to

option and enter into the The modifications will be available after clicking [APPLY] button on the bottom of the sub windows and being prompted to save and then clicking [ok] button. If you want to cancel the modification, click [Exit] button to exit the menu. ] button, all system default values will be reset to default value System default value indicates the value pre-set at the factory. Output] to enter into the output set interface shown as Picture 5 On mode, click [Menu] button on the front panel or Remote controller to enter into Main menu interface shown as Picture 5 can click [ ] icon to enter the main menu screen. In Main Menu mode, you can control device management settings, such as Record, Network, Search, Device, System and Advanced setting etc.  Channel: allow you setup the channel you  Name: allow you setup the channel name, and system support up to eight characters or four characters.  Position: allow you setup the display position of each channel.  Color:Click [Setup] option to enter into the [Color setup] interface shown as Picture 5-4.  Covert: allow you enable [Live] surveillance screen  Show time: allow you enable system time appear in the screen.  Record time: When set to “Enable record system time into the recordhistory.  Copy: allow you copy all data of one channel to any one Above picture 5-4 is the Color Menu where you can adjust image brightness, saturation, contrast and hue parameters of each channel. User Manual Live> option and enter into the setting interface shown as The modifications will be available after clicking [APPLY] button on the bottom of the sub-menu ] button to exit the menu. reset to default value. Output] to enter into the output set interface shown as Picture 5-5. On mode, click [Menu] button on the front panel or Remote controller to enter into Main menu interface shown as Picture 5-2. And also you ] icon to enter the main menu In Main Menu mode, you can control device management settings, such as Display, Device, System and allow you setup the channel you desired. allow you setup the channel name, and system support up to eight characters or four Chinese allow you setup the display position of each Click [Setup] option to enter into the [Color setup] 4. allow you enable [Live] surveillance screen allow you enable system time appear in the Enable”, you are allowed to record system time into the recordhistory. of one channel to any other is the Color Menu where you can adjust image brightness, saturation, contrast and hue

Spot output: display window will include Single, Quad and 9  Transparency: allow you adjust menu’s transparency, and its range is 1~128  Margin: allow you adjust the whole screen’s margin. De Volume: allow you adjust the DVR volume shown as Picture 5 Picture 5-5 Go to [Main menuDisplayOutput] to enter into the output set interface shown as Picture 5-5. Click [Spot output] option and set relative parameters shown as Picture 5-7.  Video output: Support CVBS output Live and Spot mode simultaneously, and Live is main output, and Spot is auxiliary output.  CH Sequence: the option is defaulted to “Off” and sequence time is 5 second. User can activate the option as per request.  Rotate time: allow you set sequence time, and minimum time can be set to 3 seconds.  VGA/HDMI Resolution: allow you select VGA or HDMI output, including 800x600, 1024x768, 1280x1024, 1440x900 and 1920 x1080. Picture 5-10 9 Live output: display window will include Single, Quad, 9-split and 16 Spot output: display window will include Single, Quad and 9-split mode. allow you adjust menu’s transparency, and its range is 1~128 allow you adjust the whole screen’s margin. Details operations please refer to the Picture 5 allow you adjust the DVR volume shown as Picture 5-11. Picture 5-6 Output] enter into the output set interface Click [Live] to pop up the interface shown as Picture 5-6. Now you could perform channel sequence setting. Click [Spot output] option and set relative 7. Picture 5-7 Support CVBS output Live simultaneously, and Live is main output, and Spot is auxiliary output. the option is defaulted to “Off” and sequence time is 5 second. User can activate the option as per request. allow you set sequence time, be set to 3 seconds. allow you select VGA or HDMI output, including 800x600, 40x900 and Picture 5-8 Picture 5-11 Picture 5-9 User Manual split and 16-split mode; allow you adjust menu’s transparency, and its range is 1~128，shown as Picture 5-9. tails operations please refer to the Picture 5-10. Click [Live] to pop up the interface 6. Now you could perform channel sequence setting.

The function Allow you setup privacy zone up to four privacy zones, and please follow below steps to set: 1. Select the area (Area 1 ~ Area 4); 2. Click [Setup] to adjust position of mask area; 3. After finishing position adjust, click right key 4. Click [Apply] to save the above setting. 5.2.2 Record set 5.2.2.1 Record parameters 5.2.2.2 Schedule Picture 5-14 Picture 5-15 Picture 5- 10 The function Allow you setup privacy zone parameters according to Picture 5 up to four privacy zones, and please follow below steps to set: (Area 1 ~ Area 4); Click [Setup] to adjust position of mask area; After finishing position adjust, click right key of mouse to return back [Privacy zone] interface; Click [Apply] to save the above setting. Click [Main MenuRecord the interface shown as Picture 5 [Channel] option allows you select one channel desired. To setup weekly schedules, tick record status you want (Alarm, General, or No Record) and then click on each box in the schedule time line that you want this method to apply to. You can use the [Copy – To] pull-down menus and Copy button to copy sett from one day to another day or all days. Click [Main menuRecord into the interface shown as  Channel: allow you setup the channel you desired.  Record: allows you status(Enable/Disable  Pack Duration: indicates maximum continuous record time (15, 30, 45 and 60 min).  Pre-record: Motion detection Pre-record function. Picture 5 -12 User Manual parameters according to Picture 5-12. Each channel could set of mouse to return back [Privacy zone] interface; RecordSchedule] to enter into the interface shown as Picture 5-15. allows you select one channel you schedules, tick-select the box of the record status you want (Alarm, General, or No Record) and then click on each box in the schedule time line that you want this method to apply to. You can use the [Copy down menus and Copy button to copy settings from one day to another day or all days. RecordRecord Para] to enter into the interface shown as Picture 5-14. allow you setup the channel you allows you set up record Enable/Disable) of each channel indicates maximum continuous record time (15, 30, 45 and 60 min). Motion detectionrecord support Picture 5-13

You can also click on the Default button to use the system defaults. Explanation: Under the for alarm record, “yellow” stands for Motion record and 5.2.2.3 Main Stream Go to [Main menuRecordMain Stream] to enter into the interface shown 5.2.3 Search 5.2.3.1 Record Search Click [Main MenuSearchRecord Search] to enter into the interface shown as Picture 5  Time Search: In the view it in Playback mode. This is useful for hunting a specific recording of an incident if you know the date and time it occurred.  File List: click [File List] button to enter into the [E records for the time quantum will appear in the screen.  Playback Mode: You can use the Playback Control bar to operate the Fast Forward (X2, X4 and X8), Slow play (1/2, 1/4 and 1/8 speed), Play, Pause/Fr DVR will return back to previous menu shown as Picture 5  Play control Bar: the play control bar will display current playing processing shown as Picture 5 When user click any time at the control bar and this point have not any record file, system will auto return back to previous menu. Picture 5-16 Picture 5-17 11 After you complete the schedule you activate it by clicking the [Apply] button. You can also click on the Default button to use the system defaults. menu and menu, original color stands for no record, “Red” stands , “yellow” stands for Motion record and “Green” stands for normal record Main Stream] to enter into the interface shown as Picture 5 Record Search] to enter into the interface shown as Picture 5 In the , user can search for a specific date and time for a recording and view it in Playback mode. This is useful for hunting a specific recording of an incident if you know the date click [File List] button to enter into the [Event Search] screen shown as Picture 5 records for the time quantum will appear in the screen. You can use the Playback Control bar to operate the Fast Forward (X2, X4 and X8), Slow play (1/2, 1/4 and 1/8 speed), Play, Pause/Frame, Rewind(X2, X4 and X8). When ending playback, DVR will return back to previous menu shown as Picture 5-20. the play control bar will display current playing processing shown as Picture 5 When user click any time at the control bar and this point have not any record file, system will auto return  Resolution: support D1, HD1 and CIF  Frame rate: PAL: 1-25 f/s ; NTSC: 1  Bit rate: user could select the relative value by pull-down menu.  Audio: When tick-selecting the option, system will record video stream with audio simultaneously.  Channel: allows you select the channel(s) you desire to search.  Date Search: In the Video Search screen, user can search for all the records in a specific date. To execute a video search, highlight and select the date numeric field and then click a detailed time quantum of the specific date, system will start the playback from the first record of the time quantum. User Manual menu, original color stands for no record, “Red” stands “Green” stands for normal record. as Picture 5-16. Record Search] to enter into the interface shown as Picture 5-17. , user can search for a specific date and time for a recording and view it in Playback mode. This is useful for hunting a specific recording of an incident if you know the date vent Search] screen shown as Picture 5-19, the video You can use the Playback Control bar to operate the Fast Forward (X2, X4 and X8), ame, Rewind(X2, X4 and X8). When ending playback, the play control bar will display current playing processing shown as Picture 5-20. When user click any time at the control bar and this point have not any record file, system will auto return D1, HD1 and CIF 25 f/s ; NTSC: 1-30 f/s. user could select the relative value by selecting the option, system will record video stream with audio allows you select the channel(s) In the Video Search screen, user can search for all the records in a specific date. To execute a video search, highlight and select the date numeric field， and then click a detailed time quantum of the specific date, system will start the first record of the time

5.2.3.3 Time Axis setup, file clip and zoom in/out 1) The DVR supports the processing control bar function when playing back record files shown as Picture5-19A (Up to 4 CH is available). 2) Click [ ] icon beside the processing bar to pop up the interface shown as
Time Axis: defaulted to 24hours, and allow user select 2hours, 1hour, 30minutes or user-defined. Detailed operation is as follows: Detailed operation is as follows: Detailed operation is as follows: Detailed operation is as follows: （ （ （ （1） ） ） ） Fixed time axis: If you select [ ] option, that means the processing control bar cover two video content. （ （ （ （2） ） ） ） User-defined: select [ ]option and move the cursor to processing bar to select start time and/or end time (that is to say Now, the whole time axis equals the time quantum you j Click [Main MenuSearchRecord search] to enter into the interface shown as Picture 5-18 Then tick-select the channel you want to playback; and click [Play] button to enter into the playback mode 。 Picture 5 Picture 5-19A 12 Time Axis setup, file clip and zoom in/out supports the processing control bar function when playing back record files shown as 19A (Up to 4 CH is available). Click [ ] icon beside the processing bar to pop up the interface shown as Time Axis: defaulted to 24hours, and allow user select 2hours, 1hour, 30minutes or Detailed operation is as follows: Detailed operation is as follows: Detailed operation is as follows: Detailed operation is as follows: : If you select [ ] option, that means the processing control bar cover two elect [ ]option and move the cursor to processing bar to select start time that is to say, click any points of the processing bar as start time and/or end time Now, the whole time axis equals the time quantum you just selected (shown as Picture Picture 5-18 Record search] to enter into the interface shown as Picture select the channel you want to playback; and click [Play] button to enter Picture 5-19A Picture 5-19A-1 19A-2 Picture 5-19B User Manual supports the processing control bar function when playing back record files shown as Click [ ] icon beside the processing bar to pop up the interface shown as Picture 5-19A-1. Time Axis: defaulted to 24hours, and allow user select 2hours, 1hour, 30minutes or : If you select [ ] option, that means the processing control bar cover two-hours elect [ ]option and move the cursor to processing bar to select start time essing bar as start time and/or end time), ust selected (shown as Picture5-19B-1. 1 -1

 Clip and backup: When one channel is playing shown as Picture 5-19B-1. Click the icon to start video clip function, click it again to end the function and pop up the dialog shown as Picture 5  Zoom Function: When one channel is playing Click the icon to zoom in one area of the pl 5.2.3.4Event Search Click [Main MenuSearchEvent Search] to enter into the interface shown as Picture 5 You could highlight and double you want to view based on date, time, and channel and record mode search. (Last page): go to the last page. Clicking the [last] button will make you enter into last page quickly. ALL (Select all): Allows you to select all the events on the current page. Inverse (Select Invert): Allows you to selected. Backup： ： ： ：You can back-up the record files Picture 5-20 Picture 5-19B-2 13 Record Clip and backup function and Zoom in/out function Clip and backup: When one channel is playing-back, the [ ] icon will appear in the [Play con . Click the icon to start video clip function, click it again to end the function and dialog shown as Picture 5-19B-2. Now, allow you select if you will save the clipped video file. Zoom Function: When one channel is playing-back, the [ ] icon will appear in the [Play control] bar. Click the icon to zoom in one area of the playback screen shown as Picture 5 Event Search] to enter into the interface shown as Picture 5 You could highlight and double-click the desired record for playback. And you also can filter the records you want to view based on date, time, and channel go to the last page. Clicking the [last] button will make you enter into last page quickly. : Allows you to select all the events on the current page. : Allows you to select other events on the current page except those you have currently up the record files used USB。 (First Page): go to the first page on the list. When you view other pages, clicking [First] button brings you back to Page one. (Previous page): go to the previous ones of current page. Clicking [Pre] button will take you back the previous ones of current page first page). (Next page):go to the next ones of current page. Clicking the [Next] button will take you to the next ones of current page (except the last page) Picture 5 User Manual will appear in the [Play control] bar . Click the icon to start video clip function, click it again to end the function and ow, allow you select if you will save the clipped video file. back, the [ ] icon will appear in the [Play control] bar. 5-19C. Event Search] to enter into the interface shown as Picture 5-20. click the desired record for playback. And you also can filter the records go to the last page. Clicking the [last] button will make you enter into last page quickly. select other events on the current page except those you have currently go to the first page on the list. When you view other pages, clicking [First] button brings you back to Page one. go to the previous ones of current page. Clicking [Pre] button will take you back the previous ones of current page (except the go to the next ones of current page. ] button will take you to the next (except the last page) Picture 5-19C

5.2.4 Network 5.2.4.1 Network set Click [Main menu Network DNS: DNS server is generally provided by local ISP. Herein please enter the IP address of your DNS 4 Set IP address captured by 5 Visit a remote DVR http: // public net IP: HTTP http: //intranet IP: HTTP 6 Input the IP address of your domain name server Picture 5-30 Picture 5-31 Goto [Main menuSearch enter into the Log search interface shown as Picture 5-28. Picture 5-28 14 NetworkNetwork] to enter into the below interface shown as Picture 5 : DNS server is generally provided by local ISP. Herein please enter the IP address of your DNS Set IP address captured by DVR and HTTP port to a router HTTP port (such as: 19010) HTTP port (such as: 19010 - only use for Intranet) Input the IP address of your domain name server After selecting network mode - such as staticallocation- and setting up web ports remotely through a network or internet. UPnP (Universal Plug and Play) function: supports UPnP function and set to will automatically forward port to router. Log] option to enter into the Log search interface shown as Herein allow you preview the log information you have searched. And click [Backup] to export all the log information which is listed. For other button functions please refer to previous section 5.3.4.3-Event Search Picture 5 When selecting DHCP from will automatically allocate IP address for your DVR. After restarting each time, the IP address captured by your DVR may be different.So, port forwarding is required when you visit a remote DVR. 1. Select DHCP and click [Apply] button; 2. Exit and restart DVR; 3. Input media port and HTTP User Manual Network] to enter into the below interface shown as Picture 5-30. : DNS server is generally provided by local ISP. Herein please enter the IP address of your DNS such as DHCP, PPPOE or and setting up web ports，you can visit DVR a network or internet. UPnP (Universal Plug and Play) function: If router P function and set to “Enable”, system will automatically forward port to router. Herein allow you preview the log information you have searched. And click [Backup] to export all the log information which is listed. For other button functions please refer to previous section Picture 5-29 rom the Type, A router will automatically allocate IP address for your DVR. After restarting each time, the IP address captured by your DVR may be different.So, port forwarding is required when you visit a remote DVR. lick [Apply] button; Input media port and HTTP port

restarted. User need to change MAC address when there are multiple DVRs at the same local area network. Details please refer to section 5.6.2.5 5. The Subnet Mask, gateway and DNS server should be consistent with your router’s configurations. 6. Input DNS address. Please check router firstly. The setting should be consistent with 7. Click [Apply] button Now you could remotely visit the http: // public net IP: HTTP port (such as: http: //intranet IP: HTTP port (such as: Under the above four net mode, you from the websites: www.3322.org 5.2.4.2 Mobile Set The DVR is currently compatible with mobile networks. Please follow below steps: 1、 Configure network parameters, details please refer to section 5.2.4.1. 2、 Configure mobile port no (such as 19011); Picture 5-32 Picture 5-33 Picture 5-34 15 All the parameters you set are available only when you click [Apply] and after system are User need to change MAC address when there are multiple DVRs at the same local area network. section 5.6.2.5 -System Information. The Subnet Mask, gateway and DNS server should be consistent with your router’s configurations. 6. Input DNS address. Please check router firstly. The setting should be consistent with Now you could remotely visit the DVR via IP port (such as: 19010) port (such as: 19010 - only use for Intranet) （4）When selecting 3G from the Type. Details please follow below steps: 1、Input Mobile Port(China Telecom:#777;Others: *99#) 2、Click . System will automatically capture IP. 3、Enter IP address:web port to visit DVR remotely. you can visit your remote DVR via DDNS and apply for free DDNS account www.3322.org or www.dyndns.org. The DVR is currently compatible with mobile phones runningAndriod, Iphone and Black berry Configure network parameters, details please refer to section 5.2.4.1. uch as 19011); and the port need forward to router. Details please re When selecting PPPoE from can input user name and password provided by ISP and set Media and HTTP can visit your remote DVR by using the IP address captured after registering a domain name and HTTP port and connect to your DVR via public network. When selecting Static from the Type, user can directly input IP address, Subnet Mask, Gateway and picture 5-32. 1. Set your net type to Static; 2. Set Client port number (such as need to be forwarded to a router. 3. Input HTTP port number (such as need to be forwarded to a router; 4. Input a specified IP address User Manual All the parameters you set are available only when you click [Apply] and after system are User need to change MAC address when there are multiple DVRs at the same local area network. The Subnet Mask, gateway and DNS server should be consistent with your router’s configurations. 6. Input DNS address. Please check router firstly. The setting should be consistent with routers When selecting 3G from the Type. Details please follow Input Mobile Port(China Telecom:#777;Others: *99#) Click . System will automatically capture IP. Enter IP address:web port to visit DVR remotely. can visit your remote DVR via DDNS and apply for free DDNS account Andriod, Iphone and Black berry on 3G and the port need forward to router. Details please refer to rom the Type, user can input user name and password provided by Media and HTTP port. And now you can visit your remote DVR by using the IP address captured after registering a domain rt and connect to your DVR When selecting Static from the Type, user can directly input IP address, Subnet Mask, Gateway and DNS shown as below port number (such as 19009), and the port ed to be forwarded to a router. t number (such as 19010), and the port need to be forwarded to a router; Input a specified IP address to [IP address] column;

4、 System auto restart; 5、 User name and password of mobile is consistent 5.2.4.3Router’s Port Forwarding Port forwarding is required when you want to access the DVR connected to the router’s network. If PPPoE is selected, port forwarding is not required. 1. Input router’s IP address from IE Picture 5-35; 2. Click [Transmittal rule] option to take yo 3. The DVR IP address for the intranet should be <192.168.1.101>, you should forward (19009) and HTTP port (19010 4. Now user can visit the DVR remotely. 5.2.4.4 Sub stream Go to [Main menuNetwork 5.2.4.5 Email set Click [Main MenuNetwork Picture 5-36 Picture 5-37 Picture 5-35 16 Save the parameters and exit Main Menu; User name and password of mobile is consistent with DVR Router’s Port Forwarding Port forwarding is required when you want to access the DVR connected to the router’s network. If PPPoE is selected, port forwarding is not required. Input router’s IP address from IE-based browser to open the Router configuration Click [Transmittal rule] option to take you to the port forwarding instructions for your router; The DVR IP address for the intranet should be <192.168.1.101>, you should forward 19010) to this IP address respectively. Now user can visit the DVR remotely. NetworkSub Stream] to enter into the interface shown Email] option to enter into the email set interface shown as Picture 5 SSL: is a security link transport protocol. You can encrypt your communication info (including your email) using SSL to prevent hackers from email or communication info and even your password. Please set SSL to “On” via Gmail.com server, and set to “Off” via other mail server.  Video: allow you open or close the sub stream output. If you select “Enable” system will select sub and guarantee image quality once network is unstable.  Frame rate: allow you set net transmittal frame rate. User could select the relative value b  Bit rate: allow you set net transmittal bit rate. User could select the relative value by pull  Audio: When tick-selecting the option, system will record video and audio simultaneously. Friendly Reminder: The router’s port forwarding interface may be different, however, when entering into virtual server, user will always need forward port 1025~65535) of router to IP address of DVR allocated or automatically captured, and select [All] or [Both] in corresponding protocol column and save the above setting. Above steps may differ from the router device depending on the manufacturer. User Manual Port forwarding is required when you want to access the DVR connected to the router from outside of the based browser to open the Router configuration interface shown as u to the port forwarding instructions for your router; The DVR IP address for the intranet should be <192.168.1.101>, you should forward Media port Sub Stream] to enter into the interface shown as Picture 5-36 interface shown as Picture 5-37 SSL: is a security link transport protocol. You can encrypt your communication info (including your email) using SSL to prevent hackers from monitoring your email or communication info and even your password. Please set SSL to “On” via Gmail.com server, and set allow you open or close the sub stream output. If you select “Enable” system will select sub-stream preview and guarantee image quality once network is unstable. allow you set net transmittal frame rate. User could select the relative value by pull-down menu. allow you set net transmittal bit rate. User could select the relative value by pull-down menu. selecting the option, system will record video and audio simultaneously. The router’s port forwarding interface may be different, however, when entering into need forward port (range: of router to IP address of DVR allocated or automatically captured, and select [All] or [Both] in corresponding protocol column and save the above Above steps may differ from the router device depending on the manufacturer.

(SMTP). The port number for most mails is 25 except such as Gmail server (Port No.: 465).  SMTP server: indicates server address you used. 5.2.4.6DDNS Set Click [Apply] button and restart the DVR; and then enter the domain name (such as: http://superdvr.3322.org:8080) to visit your remote DVR. 5.2.5 Alarm 5.2.5.1 Motion Click [Main menuAlarmMotion] to enter into the interface shown as Picture 5 Picture 5-42 Picture 5-38 Picture5-41 17 SMTP Port: indicate one kind of mail transmittal port opened by Simple Message (SMTP). The port number for most mails is 25 except such as Gmail server (Port No.: 465). SMTP server: indicates server address you used.  Sender address: indicates sender’s email address. The email address should be consistent with the That is to say, when you use email address [email protected], the according server should be smtp.gmail.com.  Receiver address: indicates receiver’s email address. The email address is used to receive image transmitted from DVR alarm. Please clear the images you have received as soon as possible to avoid overloading your email account. Click [Apply] button and restart the DVR; and then enter the domain name (such as: ) to visit your remote DVR. Motion] to enter into the interface shown as Picture 5  Server: select DDNS provider  Host name: input the host domain name you have registered at dynamic domain name system, such as: DVR2009.3322.org;  User Name: Input a user name registered before applying for a domain name;  Password: Input a password you set when registering a user name.  Channel: allow you enable/disable the motion function for any channel.  Area: Click the [Setup] button to enter into area setup interface shown as Picture 5-43.  Sensitivity: allow you to set sensitivity level of motion detection from low with 8 being the most sensitive.  Alarm out:allow you connect external alarm sensor. User Manual SMTP Port: indicate one kind of mail transmittal port opened by Simple Message Transfer Protocol (SMTP). The port number for most mails is 25 except such as Gmail server (Port No.: 465). indicates sender’s email address. The email address should be consistent with the server you use. That is to say, when you use email address – , the according server should be indicates receiver’s email address. The email address is used to receive image transmitted from DVR alarm. Please clear the images you have received as soon as possible to avoid overloading your email account. Click [Apply] button and restart the DVR; and then enter the domain name (such as: Motion] to enter into the interface shown as Picture 5-42. select DDNS provider input the host domain name you have registered at dynamic domain name system, such as: DVR2009.3322.org; Input a user name registered before applying for a domain name; Input a password you set when istering a user name. allow you enable/disable the motion function for any channel. Click the [Setup] button to enter into area setup interface shown as allow you to set sensitivity level of motion detection from higher to being the most sensitive. allow you connect external

60s);  Show Message: You can set show message on the screen when motion alarm is detected.  Buzzer time: you can set how long the buzzer will sound when motion is detected(off, 10s, 30s, 40s, 60s);  Send Email：Allows you set the alarm images is issued to a specified email.  Full screen Alarm: The function is defaulted to “On". When the motion is detected, the channel will be switched to the full screen mode.  Record Channel: the record channel will be activated when the object move is detected.  Post Recording: you can set how long alarm record will last when alarm ends (30s, 1 5minutes).  Copy: allow you copy current channel parameters to any other channel or all channels. 5.2.6 Device 5.2.6.1 HDD Set Click [Main menuDevice When DVR is connected to a HDD, the system will automatically detect if HDD is If the cable connected to HDD If HDD need to be formatted, status will be shown as “no format”, o “Normal”  NO: indicate HDD no pre-seted by system.  Status:：It will be available only when HDD have been formatted.  Total Space – Total size of the hard drive currently installed.  Free Space – Total amount of free space available on the hard drive currently installed.  Useable Rec. Time – Free space currently available in  Auto-overwrite – When set to ENABLE the DVR will record over the oldest files on the hard drive. The Picture 5-43 Picture5-45 18 you can set how long the buzzer will sound when object move is detected(10s, You can set show message on the screen when motion alarm is detected. you can set how long the buzzer will sound when motion is detected(off, 10s, 30s, 40s, 60s); Allows you set the alarm images is issued to a specified email. The function is defaulted to “On". When the motion is detected, the channel will be switched to the full screen mode. the record channel will be activated when the object move is detected. you can set how long alarm record will last when alarm ends (30s, 1 allow you copy current channel parameters to any other channel or all channels. HDD] to enter into the interface shown as Picture 5 a HDD, the system will automatically detect if HDD is HDD is loosen or HDD is abnormal, HDD status will be shown as “No If HDD need to be formatted, status will be shown as “no format”, otherwise, the HDD status will be shown as seted by system. available only when HDD have been formatted. Total size of the hard drive currently installed. Total amount of free space available on the hard drive currently installed. Free space currently available in hours. When set to ENABLE the DVR will record over the oldest files on the hard drive. The The channel will be separated into a (PAL/NTSC mode). When any object moves into the motion detection area, and the area where the object is located is displayed in red and motion detection be triggered. In the semi-transparent area the motion detection is not activated. After configuring the above parameters, click to save it. 45 Picture5 User Manual you can set how long the buzzer will sound when object move is detected(10s, 30s, 40s, You can set show message on the screen when motion alarm is detected. you can set how long the buzzer will sound when motion is detected(off, 10s, 30s, 40s, 60s); Allows you set the alarm images is issued to a specified email. The function is defaulted to “On". When the motion is detected, the corresponding the record channel will be activated when the object move is detected. you can set how long alarm record will last when alarm ends (30s, 1minutes，2minutes， allow you copy current channel parameters to any other channel or all channels. HDD] to enter into the interface shown as Picture 5-45. a HDD, the system will automatically detect if HDD is normal or not; HDD status will be shown as “No Disk”, or, therwise, the HDD status will be shown as Total amount of free space available on the hard drive currently installed. When set to ENABLE the DVR will record over the oldest files on the hard drive. The separated into a 44x36 grids When any object moves into the motion detection area, and the area where the object and motion detection will transparent area the motion After configuring the above parameters, click to Picture5-46

important events off the HDD before they’re record once the DVR is full. Whilst you won’t lose old footage, you run the risk of missing new events as they happen. Be sure you want to do this before selecting it.  HDD Format – Formatting the HDD will erase all data (i.e. footage) which is stored on it, and re FAT (file allocation table).  USB Format - If you have a USB flash drive connected to the DVR, you can format that, too. To do this, click the [USB Format] button and clic Note: Itis an important first step when configuring your DVR to make sure that the hard drive (HDD) options are correctly set. So, strongly suggest that you do format the HDD before start the first record. 5.2.7 System 5.2.7.1 General Click [Main MenuSystem Picture 5-49 19 DVR will always be able to record events as they happen, however, it does means that you’ll need to get important events off the HDD before they’re overwritten; and if overwrite is set to DISABLE the DVR will stop record once the DVR is full. Whilst you won’t lose old footage, you run the risk of missing new events as they happen. Be sure you want to do this before selecting it. g the HDD will erase all data (i.e. footage) which is stored on it, and re If you have a USB flash drive connected to the DVR, you can format that, too. To do this, click the [USB Format] button and click [OK]. Itis an important first step when configuring your DVR to make sure that the hard drive (HDD) options are correctly set. So, strongly suggest that you do format the HDD before start the first record. General] to enter into the interface shown as Picture 5 You will be allowed to modify system date/time, date/time format, time zone, language, video format and menu time out. And click [DST Setup] button to enter into the below interface shown as Picture 5 configure DST status and mode.  Click [NTP setup] to enter into the interface shown as Picture 5-51 and now allow you enable/disable the NTP function. User Manual DVR will always be able to record events as they happen, however, it does means that you’ll need to get overwritten; and if overwrite is set to DISABLE the DVR will stop record once the DVR is full. Whilst you won’t lose old footage, you run the risk of missing new events as they g the HDD will erase all data (i.e. footage) which is stored on it, and re-create the If you have a USB flash drive connected to the DVR, you can format that, too. To do this, Itis an important first step when configuring your DVR to make sure that the hard drive (HDD) options are correctly set. So, strongly suggest that you do format the HDD before start the first record. General] to enter into the interface shown as Picture 5-49 You will be allowed to modify system date/time, date/time format, time zone, language, video format and And click [DST Setup] button to enter into the below e shown as Picture 5-50, and you are allow to configure DST status and mode. Click [NTP setup] to enter into the interface shown 51 and now allow you enable/disable

When NTP function is set to “Enable”, system will calibrate the time at every 00:07:50 and every start 5.2.7.2Users Click [Main MenuSystem The model supports up to seven users with one Admin and six users. Click [Edit] button to enter into the [User Edit] interface shown as Picture 5- Select one and click Picture 5-54. [Admin] is authorized to set common user’s authority.  Live: Tick-select the option and the user is allowed to view all the live images for all the channels.  Playback: Tick-select the option and the user is allowed to playback the record you selected. Picture 5-52 Picture 5-54 Picture 5-50 20 The above [NTP function] change will be available only when system connected to internet. And When NTP function is set to “Enable”, system will calibrate the time at every 00:07:50 and every start users] option and then enter into the interface shown as Picture 5 The model supports up to seven users with one Admin and six users. Click [Edit] button to enter into the [User -53. And input user name and password. Select one and click , and then enter into interface shown as 54. [Admin] is authorized to set common user’s authority. select the option and the user is allowed to view all the live images for all the channels. select the option and the user is allowed to playback the record you selected. Picture 5  Log Search: allow you check all the system logs.  Parameter: allow you set all the parameters.  Maintain: allow you update version, recover ex-factory value, device reboot and shut down.  Disk Manage: allow you manage and control the HDDs.  Remote Login: allow you remote  Rotate Control: allow you sequence live screens for all the channels.  Manual record: allow you manually start/stop record.  Backup: Tick-select the option, the user is allowed to backup the record of all the channels. Picture 5 User Manual The above [NTP function] change will be available only when system connected to internet. And When NTP function is set to “Enable”, system will calibrate the time at every 00:07:50 and every start-up. users] option and then enter into the interface shown as Picture 5-51 The model supports up to seven users with one Admin and six users. Click [Edit] button to enter into the [User , and then enter into interface shown as select the option and the user is allowed to view all the live images for all the channels. select the option and the user is allowed to playback the record you selected. Picture 5-53 allow you check all the system logs. allow you set all the parameters. allow you update version, recover factory value, device reboot and shut down. allow you manage and control the allow you remote login DVR. allow you sequence live screens for allow you manually start/stop select the option, the user is allowed to backup the record of all the channels. Picture 5-51

5.2.8 Advanced 5.2.8.1 Maintain Click [Main menuAdvanced  Load Default: If [Load Default] is selected, you can initialize the system to the ex  Reboot: Click [Reboot] button to manually restart DVR system.  Shutdown: Click the [Shutdown] button to shutdown the device.  Load Setting: Load the parameters in the U flash disk to device; after loading successfully, system will auto restart.  Save Setting: Save the parameters of device to a flash disk. Note: 1. Do not take out the USB memory or break the power during the update; 2. When the update is done, system will be automatically restarted; 3. Please manually recovery ex 4. It will be available only when DVR return back to Preview mode and no 5.2.8.2 Event Click [Main menuAdvanced Picture 5-55-1 Picture 5-58 Picture 5-56 21 Info] and then enter into the interface shown as Picture 5 AdvancedMaintain] to enter into the maintain interface shown as Picture 5 If [Load Default] is selected, you can initialize the system to the ex Click [Reboot] button to manually restart DVR system. Click the [Shutdown] button to shutdown the device. Load the parameters in the U flash disk to device; after loading successfully, system will Save the parameters of device to a flash disk. the USB memory or break the power during the update; When the update is done, system will be automatically restarted; Please manually recovery ex-factory default after system rebooting; It will be available only when DVR return back to Preview mode and no any operation. AdvancedEvent] to enter into the interface shown as Picture 5 Now user can check the current Device Device ID, Device type, Device S/N, MAC address, IE version, Software version, Panel version etc.  Auto Reboot: You can enable the auto maintain function regularly as per user’s need.  System Upgrade: After decompressing update file package, copy the file named “dvrupgrade” to root directory of U flash disk; Insert the U flash disk into USB port Click .  Event Type: support the three abnormal types: Disk No Space, Disk Error and Video Loss.  Enable: allow you activate abnormal alarm.  Alarm out: select [Enable] or [Disable]  Latch time:you can set how long the buzzer will sound when external sensor alarm is detected(10s,20,40s,60s); Show Message: You can set show message on the screen when sensor alarm is detected. Picture 5-55 User Manual Info] and then enter into the interface shown as Picture 5-55. Maintain] to enter into the maintain interface shown as Picture 5-56. If [Load Default] is selected, you can initialize the system to the ex-factory default. Load the parameters in the U flash disk to device; after loading successfully, system will any operation. Event] to enter into the interface shown as Picture 5-58. check the current Device name, Device ID, Device type, Device S/N, MAC address, IE version, Software version, Panel ou can enable the auto maintain function regularly as per user’s need. After decompressing update file package, copy the file named “dvrupgrade” to root directory of Insert the U flash disk into USB port of DVR; support the three abnormal types: Disk No Space, Disk Error and Video Loss. activate abnormal alarm. select [Enable] or [Disable] you can set how long the buzzer will sound when external sensor alarm is You can set show message on the screen when sensor alarm is detected. 55-2

you want to login to the DVR again, you would input device code andpassword to unlock the interface shown as Picture 5-59 5.4Split mode The model displays 4/8 live images in the sequence of single, 4-split and 9-split modes. If you enter into 4-split mode, the live images will be displayed in turn CH1~4, CH5~8…and CH13~16. If you enter into 9-split mode, the live images will be displayed in turn CH1~9CH10~16. 5.5 PIP Mode You can display a Picture-in-Picture in live mode. PIP has two display modes, including 1X1 display mode and 1X2 display mode. 5.6 Record search You could enter into [Record Search] menu from Pop-up menu conveniently and quickly and search/playback the record histories. We introduced Record search details previously in Section 5.3.3.1. 5.7 Mute Click the [ ] icon, or press button on the front panel and Remote controller to control the mute of DVR. 5.8 Manual Record You can start manual record function, or you also can click [ ] button on the Front panel or Remote controller to activate manual record. Please stop record manually once you activate manual record. 5.9 Stop record To stop record quickly, please click the icon [ ] or [Stop] button on the front panel or remote controller. 5.10 Start Sequence In the single mode, when entering into [Start sequence] menu, auto-sequence will be conducted at the set interval. Details please refer to section 5.3.1.2. Friendly Reminder: Administrator has full authority over Main Menu operations and has an authority to limit common user’s operation. Picture 5-59

6.1ActiveX control download and installation Open your web browser and input the IP address and web port of DVR, such as ： http://172.18.6.202:8080/ . If your computer is connected to internet, it will download and install “ActiveX” Plug-in automatically. If your computer system is Vista, you may need to setup the user authority. Details please refer to the below picture: Start →setup→ control panel （Tick “√” use UAC to help protect your computer and confirm OK）. Vista System Vista Win-7 system: Reminder: If the ActiveX control is not downloaded successfully, please check if your browser’s safety level or firewall setting is too advanced. Please run IE →Tools→Internetoptions→Internet Custom level→Enable the options (details please refer to the below Picture 6-1). If running the web application for the first time, you need about one minute to finish download and install the ActiveX controls, please wait patiently. Note: If you want to use the undated webcam at one computer which you already login before, please delete the old IE webcam and click [Start
Run] and then input the command characters: “regsvr32/u HiDvrOcx.ocx”, then login again. WIN7-1 WIN7-2 Picture6-1

After ActiveX controls installation stream> or , and then allow you tick 6.3 Live interface After successful logging-in web manager, you will enter into the Live interface shown as Picture 6 6.3.1 Menu Bar Menu bar include [Live], [Replay], [Configuration], [Path Configuration] and [Logout] options 6.3.1.1 Live Display After running the Web Application Manager on your local PC, system will be defaulted to enter into interface shown as Picture 6-3. You can click [Play] button to Open/close live images and enter into on record and Capture, quad, 9-split or 16 ：Volume switch ： Record icon: record will be saved to a specified position after starting record. : Snapshot function: allow you capture the live images and save it to a specified position. The image should be saved as *.bmp format. ： Clicking the icon will close/open t Picture 6-2 24 Web Application Manager Log-in ActiveX controls installation, please input user name, password and client port; stream> or , and then allow you tick-select ; in web manager, you will enter into the Live interface shown as Picture 6 include [Live], [Replay], [Configuration], [Path Configuration] and [Logout] options After running the Web Application Manager on your local PC, system will be defaulted to enter into You can click [Play] button to Open/close live images and enter into on split or 16-split mode by operating the control bar on the bottom of screen. Record icon: record will be saved to a specified position after starting record. Snapshot function: allow you capture the live images and save it to a specified position. The image Clicking the icon will close/open the current channel’s live mode Picture 6-3 Now you click [Log-in] button, and allowed to access a remote DVR and monitor live video images using Web browser anytime from virtually anywhere. Noted that defaulted password is empty. System allows Administrator to set new password as per instructions in section 6.3.3 - [System set Configuration] menu. User Manual and client port; and select

; in web manager, you will enter into the Live interface shown as Picture 6-3 include [Live], [Replay], [Configuration], [Path Configuration] and [Logout] options After running the Web Application Manager on your local PC, system will be defaulted to enter into You can click [Play] button to Open/close live images and enter into on-spot split mode by operating the control bar on the bottom of screen. Record icon: record will be saved to a specified position after starting record. Snapshot function: allow you capture the live images and save it to a specified position. The image in] button, and then you are allowed to access a remote DVR and monitor live video images using Web browser anytime from Noted that defaulted password is empty. System allows Administrator to set new password as [System setUser

Show bit rate: Right-click the Preview window and tick ：Allow you open all the ：Display previous group of channels ：Click the icon to enlarge current window to full screen; right allow you select ：Toggle between original proportions and 6.3.1.2 Video control Picture 6-6 25 Or click the right key of mouse on each window to pop up the interface shown as Picture 6 click the Preview window and tick-select the option to show current bit rate; Allow you open all the channels； ：Allow you close all the channels. Display previous group of channels； ：Display next group of channels Click the icon to enlarge current window to full screen; right-click to pop screen> Toggle between original proportions and Adaptive Screen Resolution. ：CH Split mode ：Adjust video Hue; ：Adjust video brightness; ：Adjust video Contrast; ：Adjust video saturation; ：Recover ex-factory default value. User Manual Or click the right key of mouse on each window to pop up the interface shown as Picture 6-4. select the option to show current bit rate; Allow you close all the channels. Display next group of channels click to pop-up menu options, now Adaptive Screen Resolution. factory default value.

6.3.2.1 Record search Firstly, select one day you want to check and tick desire to playback shown as Picture 6 Secondly, select record type (Normal record, Alarm record and All) and then click < as Picture 6-9. On the time axis, red part stand for alarm record, yellow part stand for no record during this period. 26 ] icon to enter into interface shown Picture 6-7. Firstly, select one day you want to check and tick-select and the desire to playback shown as Picture 6-8 Secondly, select record type (Normal record, Alarm record and All) and then click < 9. On the time axis, red part stand for alarm record, yellow stand for normal record and original part stand for no record during this period. Picture 6-7 Picture 6-8 Picture 6-9 User Manual select and the channels you Secondly, select record type (Normal record, Alarm record and All) and then click < > button shown stand for normal record and original

otherwise, you could separately control the channels playback. Thirdly, Click [ ] icon to start record playback. When mouse curse is moving on the timeaxis, the current time will appear in the screen. Click [ / ] icon to zoom in/out the time bar display ratio shown as Picture 6 6.3.2.2 Playback control Below Picture 6-10 is playback control bar Detail brief description is shown as below list Key Description Play Pause Stop By frame Clip Snapshot Download Open all the channels Stop all the channels Record file clip After opening playback, click [ function.Record clip file will be saved as *.264 format. Snapshot function Move the mouse curse to the channel you want to capture, and click [ images remotely. After capturing the images successfully, you are allowed to save it to a specified path shown as Picture 6-11. The captured file will be saved as *.bmp format 27 > option, that means the selected channel will playback synchronously; otherwise, you could separately control the channels playback. ] icon to start record playback. When mouse curse is moving on the timeaxis, the current time ] icon to zoom in/out the time bar display ratio shown as Picture 6-9. 10 is playback control bar Detail brief description is shown as below list Description Key Description Play Open/close audio Pause Volume adjust Stop Playback control bar (x1/2,1/4,1/8, normal, x2, x4, x8) By frame Stop all the play Clip Single channel mode Snapshot Quad mode Download Full screen Open all the channels Toggle between original proportions and Adaptive Screen Resolution. Stop all the channels opening playback, click [ ] icon to clip the selected file; and click again to stop the clip function.Record clip file will be saved as *.264 format. Move the mouse curse to the channel you want to capture, and click [ images remotely. After capturing the images successfully, you are allowed to save it to a specified path shown 11. The captured file will be saved as *.bmp format Picture 6-10 Picture:6-11 User Manual > option, that means the selected channel will playback synchronously; ] icon to start record playback. When mouse curse is moving on the timeaxis, the current time 9. Description Open/close audio Volume adjust Playback control bar (x1/2,1/4,1/8, normal, x2, x4, x8) Stop all the play Single channel mode Quad mode Full screen Toggle between original proportions and Adaptive Screen Resolution. ] icon to clip the selected file; and click again to stop the clip Move the mouse curse to the channel you want to capture, and click [ ] icon to capture the live images remotely. After capturing the images successfully, you are allowed to save it to a specified path shown

Click [ ] icon to enter into the below interface shown as Picture 6 Tick-select the record file you want to download and click [Start download] System will download the record file in turn and save to local PC. 6.3.3 Configuration 6.3.3.1 Display Configuration Unfold [Display] option to find its sub Picture 6-13 Picture 6-14 Picture 6-12 28 into the below interface shown as Picture 6-12. select the record file you want to download and click [Start download] System will download the record file in turn and save to local PC.。 Display Configuration Unfold [Display] option to find its sub-options: Live and Privacy zone 1 、Live: Allow you modify channel name, Position, Show time and Record time. If show time is set to not appear on the screen on Live mode; and if record time is set to , system time can’t be found in the record file. 2、Privacy zone: Each channel could set up to four privacy zones shown as Picture 6 parameters please refer to section 5.3.1.3. If you want to delete one privacy zone, please firstly select one zone, and then click button and click on the right User Manual Allow you modify channel name, Position, Show time and Record time. If show time is set to , current system time will not appear on the screen on Live mode; and if record time is set to , system time can’t be Each channel could set up to four privacy zones shown as Picture 6-14. Details parameters please refer to section 5.3.1.3. If you want to delete one privacy zone, please firstly select one zone, and then click button and click on the right corner

6.3.3.3 Network Parameters Unfold option to enter into its sub configuration. 1、Network 2、Sub stream (shown as Picture 6 Picture 6-15 Picture 6-17 Picture 6-18 Picture 6-19 29 Click option to unfold its sub-options: Record parameter, Schedule and Main stream. Unfold option to enter into its sub-options: Network, sub stream, E (shown as Picture 6-21): Relative parameters should be consistent with DVR local setting. 1、 Record Parameters: option, allow you set channel, record enable, pack time and Pre-record status shown as Picture 6 2、 Schedule: Detailed parameters please refer to DVR local setting (shown as Picture 6 Green stand for Normal record; Yellow stands for Motion detection;. 3、 Main Stream: detailed settings please refer to DVR local setting (shown as Picture 6 modifies the resolution, frame rate, Bit rate and audio of the record channel. 1、 The model support three network type, including Static, DHCP and PPPoE. System default as its network type. User could allocate IP and perform Port forwarding for DVR according to different router. When set to “On”, user no needs to perform port forwarding. Once you modify the network parameters successfully, DVR will automatically restart.DVR For details parameters please refer to below Picture 6-18, Picture 6-19 and Picture 6 Picture 6 Picture 6 User Manual options: Record parameter, Schedule and Main stream. options: Network, sub stream, Email, mobile and DDNS 21): Relative parameters should be consistent with DVR local setting. Record Parameters: Under [Record parameters] you set channel, record enable, pack time record status shown as Picture 6-15; Detailed parameters please refer to DVR local setting (shown as Picture 6-16). Green stand for Normal record; Yellow stands for detailed settings please refer to DVR local setting (shown as Picture 6-16). Herein allow user modifies the resolution, frame rate, Bit rate and audio three network type, including Static, DHCP and PPPoE. System default as its network type. User could allocate IP and perform Port forwarding for DVR according to different router. When set to “On”, user no needs to perform Once you modify the network parameters successfully, DVR will automatically For details parameters please refer to below Picture 19 and Picture 6-20. Picture 6-16 Picture 6-20

Picture 6-22. Detailed parameters should be consistent with DVR local setting 4、DDNS Setting： ： ： ：After user applies for function under any one network type mode (Static, DHCP and PPPoE). Now you remotely visit the DVR through domain name (http://domain setting. 6.3.3.4Alarn Motion Detection: allow you configure its , , and etc. Details setting should be consistent with DVR loca 30 Click [Email setting] option to allow you set alarm email configuration parameters shown as 22. Detailed parameters should be consistent with DVR local setting. After user applies for DDNS service shown as Picture 6-24, you could enable function under any one network type mode (Static, DHCP and PPPoE). Now you remotely visit the DVR http://domain name: port No). Details setting should be consistent with DVR local allow you configure its , , and etc. Details setting should be consistent with DVR local setting (Shown as Picture Picture 6-21 Picture 6-22 Picture 6-25 Picture 6-23 User Manual Click [Email setting] option to allow you set alarm email configuration parameters shown as 24, you could enable function under any one network type mode (Static, DHCP and PPPoE). Now you remotely visit the DVR should be consistent with DVR local allow you configure its , , and (Shown as Picture 6-25).

1、HDD: Allow you check out HDD status and overwr consistent with DVR local setting. 6.3.3.6 System Click option to unfold its sub 1、 、 、 、General: User could check DVR’s language and video system, and also set system time, date format, DST and NTP shown as Picture 6- 2、 、 、 、Users: Allow you configure user name an consistent with DVR local setting. 31 ld its sub-options: HDD you check out HDD status and overwritten time shown as Picture 6 unfold its sub-options: General, Users and information. User could check DVR’s language and video system, and also set system time, date format, -29. Details setting should be consistent with DVR local setting. Allow you configure user name and password shown as Picture 6 Picture 6-27 Picture 6-29 Picture 6-30 User Manual e 6-27. Detail setting should be options: General, Users and information. User could check DVR’s language and video system, and also set system time, date format, tails setting should be consistent with DVR local setting. e 6-30. Details setting should be

version and hardware version shown as Picture 6.3.3.7 Advanced 1、 、 、 、Click to unfold its System update: allow you upgrade DVR system remotely shown as Pictur Please follow below steps to upgrade the system: a. Select the upgrade file’s path shown as Picture *.sw. b. Click , now processing bar will display current upgr 32 Allow you check out device name, number, type, MAC address, software version, IE re version shown as Picture 6-31. Click to unfold its sub-options: System update, Load default, Events and system maintain etc. allow you upgrade DVR system remotely shown as Picture 6- Please follow below steps to upgrade the system: ile’s path shown as Picture 6-33. Please note that the format of upgrade file is Click , now processing bar will display current upgrade status shown as Picture Picture 6-31 Picture 6-32 Picture 6-33 Picture6-34 User Manual address, software version, IE options: System update, Load default, Events and system maintain etc. -32. . Please note that the format of upgrade file is ade status shown as Picture 6-34.

setting should be consistent with DVR local setting. 3、 、 、 、Events: Allow you configure abnormal type, buzzer output time, and alarm email and sh as Picture 6-36. Details setting should be consistent with DVR local 4、 、 、 、Maintain: Allow you set auto system maintain for DV be consistent with DVR local setting. 6.3.4 Local setting Under option, user could set record path of record file (Live record and Playback clip file), download path of remote file, Snapshot path, File type (H.264 and AVI) an 6.3.5 Logout Click the [] icon to return back the log 33 allow you recover defaulted parameters of DVR remotely shown as Pic setting should be consistent with DVR local setting. Allow you configure abnormal type, buzzer output time, and alarm email and sh Details setting should be consistent with DVR local setting. Allow you set auto system maintain for DVR remotely shown as Pictu be consistent with DVR local setting. option, user could set record path of record file (Live record and Playback clip file), download path of remote file, Snapshot path, File type (H.264 and AVI) and Internal shown as Pict return back the log-in interface. Picture 6-37 Picture 6-35 Picture 6-36 Picture 6-38 User Manual R remotely shown as Picture 6-35. Details Allow you configure abnormal type, buzzer output time, and alarm email and show message shown R remotely shown as Picture 6-37. Detail setting should option, user could set record path of record file (Live record and Playback clip file), d Internal shown as Picture 6-38.

7.1 Troubleshooting 1. Q: What can I do if the system does not detect the HDD? A: Check if the power supply system is properly connected and data cord and power cables are securely connected. 2. Q: We have changed the password but do not remember the new password, how can we access the system? A: If you forget system password, please consult with the service personnel. 3. Q: We are not getting any video signal on the DVR, what is wrong? A: Check camera video cable and connections; or check monitor video cable and connections; or confirm that the camera has the power and / or check camera lens setting. 4. Q: Why some channels display just a blank screen even if they receive video sources? A: Check if the camera is connected to the system properly displays the image; check if the camera is properly supplied with power. 5. Q: Can the DVR have problems if it gets too hot, how can I prevent this? A: The DVR has a fan to help it dissipate heat while it is running. Please place the DVR in a place where there is good air circulation and away from heat sources to increase stability and life of the DVR. 6. Q: “Record” Can not work normally, how to deal with? A: Check if the current screen is in Play mode, pressing [Stop] button to exit the Play mode and then you can enter into the [Record] function. 7. Q: Why the Remote Controller can’t work normally? A: Check if the battery is power off; or check if the Remote Controller is broken. 8. Q: Can we records whilst playing-back? A: Yeah, you can do it. The system support you records whilst playing-back. 9. Q: Can we erase some recorded file from DVR. A: Considering the safety factor, you can’t delete the recorded file directly from the device. When you actually erase all the recorded files, please select HDD format function 10. Q: Why does the Buzzer keep sounding? A: Please check if motion detection is on and the system has detected motion, make sure the HDD is being detected and has sufficient space available; check if video has lost etc. 11. Q: Why can’t stop [Stop] function? A: Pressing [Stop] button only can stop manual record. If you want to stop Scheduled record, please revise to [No Record] during this period. 7.2Usage Maintenance 1. Please close the [OFF] button on the front panel firstly to avoid any data missing. 2. Please make sure DVR keep away from heating source. 3. Clean the internal dust regularly, keep DVR aeration well and be easy to heat dissipate. 4. Please not plug in RS-232 and RS-485 when power is on to avoid any damage to the port. 5. Please check the HDD cable and data cable to avoid the cable aging. 6. Please avoid other electronics device interfere video/audio signal of DVR a.s.a.p., or static electricity and induced voltage damage to DVR. 7. Suggest user replace BNC cable regularly to keep signal input stable.

Power Adapter Remote Controller 35 User Manual USB Mouse Software CDSoftware CD User Manual USB Mouse

department . No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without our department prior written permission. Our products are under continual improvement and we reserve the right to make changes without notice. But no guarantee is given as to the correctness of its contents. We do not undertake any responsibility for the harms cause by using our product. The model of the products in the user's manual only for recognition, but these names also perhaps are belong to other company's registered trademark or the copyright. The product picture may differ from the actual product, only for your reference. The accessories will probably be different according to the different selling areas. For details of accessories, please refer to your local distributor.




Copyright reserved