Laney LV412A Instructions Manual

the LV range of Laney amplification. LV412A Every Laney product is extensively play tested by experienced guitarists to ensure it has the tone and durability to perform at the very highest level, before being shipped to our customers. - or indeed any amplifier in the Laney range. The is a 4 x 12” cabinet rated at 280 watts (8 ohms) and can be used in isolation or combined with other Laney enclosures. Construction features a robust plywood cabinet, with large side mounted bar handles for ease of portability, textured black fret material & steel corner protection. We hope you enjoy using your new extension cabinet as much as we enjoyed designing and making it. It should give you years of trouble-free service, however please take time to read this manual, as it will allow you to get the best from your LV412A Cabinet. Best wishes from all at Laney.

please read this owner's manual carefully, and keep it in a safe place for future reference. 1). Unpacking: On unpacking your product please check carefully for any signs of damage that may have occurred whilst in transit from the Laney factory to your dealer. In the unlikely event that there has been damage, please repack your unit in its original carton and consult your dealer. We strongly advise you to keep your original transit carton, since in the unlikely event that your unit should develop a fault, you will be able to return it to you dealer for rectification securely packed. 2). Amplifier Connection: In order to avoid damage , it is advisable to establish and follow a pattern for turning on and off your system. With all system parts connected, turn on source equipment, tape decks, cd players, mixers, effects processors etc, BEFORE turning on your guitar amplifier. Many products have large transient surges at turn on and off which can cause damage to your speakers. By turning on your guitar amplifier LAST and making sure its level control is set to a minimum, any transients from other equipment should not reach your loud speakers. Wait till all system parts have stabilised, usually a couple of seconds. Similarly when turning off your system always turn down the level controls on your guitar amplifier and then turn off its power before turning off other equipment 3). Cables: Never use shielded or microphone cable for any speaker connections as this will not be substantial enough to handle the amplifier load and could cause damage to your complete system. 4). Servicing: The user should not attempt to service these products. Refer all servicing to qualified service personnel 6

Made In China Power Rating 280W Designed in the UK by Laney Serial Number: 412A Dimensions W 715 x H 728 (over feet) x D 358 Cabinet Design Rugged plywood construction, black metal corners, black textured fret material, comfortable side bar handles and rubber feet. Weight 30Kg Impedance 8 Ohms Drivers 4x12" Custom Designed Drivers LV412A Power RMS 280 Watts Inputs 2 x 6.3 Jack sockets 7