Leaf Valeo 17Wi Installation Manual

No copying, distribution, publication, modification, or incorporation of this document, in whole or part, is permitted without the express written permission of Creo. In the event of any permitted copying, distribution, publication, modification, or incorporation of this document, no changes in or deletion of author attribution, trademark legend, or copyright notice shall be made. No part of this document may be reproduced, stored in a retrieval system, published, used for commercial exploitation, or transmitted, in any form by any means, electronic, mechanical, photocopying, recording, or otherwise, without the express written permission of Creo Inc. This document is also distributed in Adobe Systems Incorporated's PDF (Portable Document Format). You may reproduce the document from the PDF file for internal use. Copies produced from the PDF file must be reproduced in whole. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks The Creo wordmark, Creo logo, and the names of the Creo products and services referred to in this document are trademarks of Creo Inc. Adobe, Acrobat, and the Acrobat logo are registered trademarks of Adobe Systems Incorporated, and are registered in the U.S. Patents and Trademark Office and may be registered in other jurisdictions. Apple, AppleTalk, AppleShare, EtherTalk, LocalTalk, Macintosh, and LaserWriter are trademarks of Apple Computer, Inc. Microsoft, Windows, Windows 2000, and Windows NT are trademarks or registered trademarks of Microsoft Corp. Other brand or product names are the trademarks or registered trademarks of their respective owners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FCC Compliance The Creo equipment referred to in this document complies with the requirements in Part 15 of FCC Rules for a Class A computing device. Operation of the Creo equipment in a residential area may cause unacceptable interference to radio and TV reception, requiring the operator to take whatever steps are necessary to correct the interference. Operation is subject to the following two conditions: (1) this device may not cause harmful intereferenec, and (2) this device must accept any interference received, including interference that may cause undesired operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limitation of Liability The product, software or services are being provided on an "as is" and "as available" basis. Except as may be stated specifically in your contract, Creo Inc. expressly disclaims all warranties of any kind, whether express or implied, including, but not limited to, any implied warranties of merchantability, fitness for a particular purpose and non- infringement. You understand and agree that Creo Inc. shall not be liable for any direct, indirect, incidental, special, consequential or exemplary damages, including but not limited to, damages for loss of profits, goodwill, use, data or other intangible losses (even if Creo has been advised of the possibility of such damages), resulting from: (i) the use or the inability to use the product or software; (ii) the cost of procurement of substitute goods and services resulting from any products, goods, data, software, information or services purchased; (iii) unauthorized

other matter relating to the product, software, or services. The text and drawings herein are for illustration and reference only. The specifications on which they are based are subject to change. Creo Inc. may, at any time and without notice, make changes to this document. Creo Inc., for itself and on behalf of its subsidiaries, assumes no liability for technical or editorial errors or omissions made herein, and shall not be liable for incidental, consequential, indirect, or special damages, including, without limitation, loss of use, loss or alteration of data, delays, or lost profits or savings arising from the use of this document. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Patents This product is covered by one or more of the following U.S. patents: .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Creo Inc. 3700 Gilmore Way Burnaby, B.C., Canada V5G 4M1 Tel: +1.604.451.2700 Fax: +1.604.437.9891 http://www.creo.com .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 653-00683B-EN Rev A Revised March 2004 RE37,376 4,558,302 4,743,091 4,992,864 5,049,901 5,079,721 5,103,407 5,111,308 5,113,249 5,122,871 5,124,547 5,132,723 5,150,225 5,153,769 5,155,782 5,157,516 5,208,818 5,208,888 5,247,174 5,249,067 5,283,140 5,291,273 5,323,248 5,325,217 5,339,176 5,343,059 5,355,446 5,359,451 5,359,458 5,367,360 5,384,648 5,384,899 5,412,491 5,412,737 5,420,702 5,420,722 5,459,505 5,473,733 5,481,379 5,488,906 5,497,252 5,508,828 5,509,561 5,517,359 5,519,852 5,526,143 5,532,728 5,561,691 5,568,595 5,576,754 5,579,115 5,592,309 5,594,556 5,600,448 5,608,822 5,615,282 5,625,766 5,636,330 5,649,220 5,650,076 5,652,804 5,680,129 5,691,823 5,691,828 5,696,393 5,699,174 5,699,740 5,708,736 5,713,287 5,742,743 5,764,374 5,764,381 5,771,794 5,785,309 5,813,346 5,818,498 5,854,883 5,861,904 5,861,992 5,875,288 5,894,342 5,900,981 5,934,196 5,942,137 5,946,426 5,947,028 5,958,647 5,966,504 5,969,872 5,973,801 5,986,819 5,995,475 5,996,499 5,998,067 6,003,442 6,014,471 6,016,752 6,031,932 6,043,865 6,060,208 6,063,528 6,063,546 6,072,518 6,090,529 6,096,461 6,098,544 6,107,011 6,112,663 6,115,056 6,121,996 6,130,702 6,134,393 6,136,509 6,137,580 6,147,789 6,158,345 6,159,659 6,164,637 6,180,325 6,181,362 6,181,439 6,186,068 6,189,452 6,191,882 6,204,874 6,208,369 6,214,276 6,217,965 6,260,482 6,266,080 6,266,134 6,267,054 6,268,948 6,283,589 6,295,076 6,299,572 6,318,266 6,352,816 6,353,216 6,366,339 6,371,026 6,377,739 6,387,597 6,396,422 6,396,618 6,407,849 6,414,755 6,422,801 6,435,091 6,441,914 6,450,092 6,456,396 6,476,931 6,477,955 6,509,903 6,541,181 6,545,772 6,564,018

Warranty Coverage Leaf warrants the Leaf product against defects in materials and workmanship for a period of one (1) year from the date of original retail purchase. Should you discover a defect, Leaf will, as its option, repair or exchange the Leaf product at no charge to you provided that you notify Leaf during the warranty period. Obtaining Warranty Service In the event that you believe the Leaf product requires service, please call your Leaf product specialist first. Often a Leaf product specialist can resolve technical issues over the phone, thereby avoiding a return. If service is required, your Leaf product specialist will provide an approval for that action. To find your local Leaf representative go to: www.creo.com/leafLocator Exclusions and Limitations This warranty does not apply if the Leaf product has been damaged by accident, installation, shipment, abuse, misuse, misapplication, neglect, fire, water, lightning, or other acts of nature; by failure to follow supplied instructions; or by modification or repair by unauthorized personnel. Leaf shall not be liable for any indirect damages, including, without limitation, lost profits, damage to other property caused by any defect in the Leaf digital back, damages based upon inconvenience, loss of use of the Leaf digital back, loss of time, commercial use, incidental and/or consequential damages for the breach of any expressed or implied warranty, including damage to property and, to the extent permitted by law, damages for personal injury, even if Leaf has been advised of the possibility of such damages. The Leaf product may contain refurbished parts. Leaf warrants the refurbished parts in Leaf products for a period of one year from the date of original retail purchase. THIS WARRANTY IS IN LIEU OF ALL WARRANTIES, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. ALL EXPRESSED OR IMPLIED WARRANTIES FOR THIS LEAF DIGITAL BACK, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESSED OR IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. For latest Leaf product news and updates, visit: www.creo.com/Leaf

Caring for the Leaf Valeo Digital Camera Back..........................................................................................ix Battery Label Caution Statement ..............................................................................................................ix Charger Label Warning Statement............................................................................................................ix Safety Precautions in Other Languages xi—xiv 1 Introduction 1 About This Document............................................................................................................................... 2 Product Overview ..................................................................................................................................... 2 2 Connecting the FireWire Cable 3 Connecting the FireWire Cable................................................................................................................. 4 Attaching the Repeater............................................................................................................................. 5 3 Mamiya 645 AF-D 7 Before Getting Started.............................................................................................................................. 8 Items Required for the Installation...................................................................................................... 8 Quick Installation Reference...................................................................................................................... 9 Installation Procedures............................................................................................................................ 10 Installing the Focusing Screen .......................................................................................................... 10 Attaching the Leaf Digital Camera Back to the Camera Body ........................................................... 12 Connecting the Cables .................................................................................................................... 13 Removing the Leaf Digital Camera Back From the Camera Body ...................................................... 14 4 Contax 645 AF 15 Before Getting Started............................................................................................................................ 16 Items Required for the Installation.................................................................................................... 16 Quick Installation Reference.................................................................................................................... 17 Installation Procedures............................................................................................................................ 18 Installing the Focusing Screen .......................................................................................................... 18 Attaching the Leaf Digital Camera Back to the Camera Body ........................................................... 19 Connecting the Cables .................................................................................................................... 20 Removing the Leaf Digital Camera Back From the Camera Body ...................................................... 21

5 Hasselblad H1 23 Before Getting Started ........................................................................................................................... 24 Items Required for the Installation ................................................................................................... 24 Quick Installation Reference ................................................................................................................... 25 Installation Procedures............................................................................................................................ 26 Installing the Focusing Screen.......................................................................................................... 26 Attaching the Leaf Digital Camera Back to the Camera Body ........................................................... 27 Connecting the Cables .................................................................................................................... 28 Removing the Leaf Digital Camera Back From the Camera Body ...................................................... 29 6 Hasselblad (500 Series)/ Horseman DigiFlex II 31 Before Getting Started ........................................................................................................................... 32 Items Required for the Installation ................................................................................................... 32 Quick Installation Reference ................................................................................................................... 33 Installation Procedures............................................................................................................................ 35 Installing the Focusing Screen Mask ................................................................................................ 35 Attaching the Leaf Digital Camera Back to the Camera Body ........................................................... 36 Connecting the Cables .................................................................................................................... 38 Removing the Leaf Digital Camera Back From the Camera Body ...................................................... 41 7 Mamiya RZ67 43 Before Getting Started ........................................................................................................................... 44 Items Required for the Installation ................................................................................................... 44 Quick Installation Reference ................................................................................................................... 45 Installation Procedures............................................................................................................................ 47 Installing the Focusing Screen Mask................................................................................................. 47 Attaching the Leaf Digital Camera Back to the Camera Body ........................................................... 48 Connecting the Cables .................................................................................................................... 50 Removing the Leaf Digital Camera Back From the Camera Body ...................................................... 52 8 Mamiya RB 55 Before Getting Started ........................................................................................................................... 56 Items Required for the Installation ................................................................................................... 56 Quick Installation Reference ................................................................................................................... 57 Installation Procedures............................................................................................................................ 58 Installing the Focusing Screen Mask................................................................................................. 58 Attaching the Leaf Digital Camera Back to the Camera Body ........................................................... 59 Connecting the Cables .................................................................................................................... 62 Removing the Leaf Digital Camera Back from the Camera Body....................................................... 63

Items Required for the Installation.................................................................................................... 66 Quick Installation Reference.................................................................................................................... 67 Leaf Valeo on Large Format Camera with Rollei Electronic Shutter ................................................... 67 Leaf Valeo on Large Format Camera with Mechanical Shutter Lens .................................................. 69 10 Leaf Portable Hardware 71 Before Getting Started............................................................................................................................ 72 Items in the Kit ................................................................................................................................ 72 Charging the Batteries............................................................................................................................ 74 Inserting Batteries into the Leaf Digital Magazine.................................................................................... 76 Attaching Camera Adaptor to Camera Body........................................................................................... 77 Attaching and Removing the Leaf Digital Magazine ................................................................................ 78 Connecting the Leaf DM FireWire Cables................................................................................................ 80 FireWire Cable and Camera Connectivity ......................................................................................... 81 Switching Leaf Digital Magazine ON/OFF ................................................................................................ 81 Connecting Leaf DP-67 (iPAQ) to Leaf Digital Camera Back .................................................................... 82 Using the Tripod U-adaptor .................................................................................................................... 83 Connecting Leaf Digital Magazine to DC Power Supply .......................................................................... 85 11 Diffusion Filter 87 Attaching the Diffusion Filter to the Camera........................................................................................... 88 12 Protective IR Filter Glass 89 Importance of the Protective IR Filter Glass ............................................................................................. 90 Cleaning the Protective IR Filter Glass............................................................................................... 91

Caring for the Leaf Valeo Digital Camera Back ................................... ix Battery Label Caution Statement........................................................ ix Charger Label Warning Statement ..................................................... ix

Connect cables to the ports and jacks on the Leaf Valeo digital camera back, according to the following list: • Camera Control cable to the Camera Control (Remote) jack • FireWire cable to the FireWire port on the Leaf Valeo digital camera back or the Leaf Digital Magazine • DP-67 cable to the AUX port of the Leaf Valeo digital camera back • Flash Sync cable to the Flash Sync jack • Camera-to Back Sync cable to the Camera-to-Back Sync jack CAUTION: To reduce the hazard of electric shock and fire, never connect telephone or telecommunication lines to any of the ports or jacks on the Leaf Valeo digital camera back. Camera-to-Back Flash Sync jack Sync jack [1] [2] AUX. port [3] [5] Camera Control jack [4] FireWire port [1] [2] [3] [4] [5]

ix Caring for the Leaf Valeo Digital Camera Back Protective IR filter glass on underside of Leaf Valeo digital camera back Battery Label Caution Statement The battery label caution statement is located on each battery. Charger Label Warning Statement The charger label warning statement is located on the battery charger. WARNING: Never open or disassemble any of the Leaf digital camera back parts, in particular the protective infrared (IR) filter glass. Note: For information about cleaning the protective IR filter glass, see Protective IR Filter Glass in this document. CAUTION: Battery can explode, leak, or catch on fire if exposed to high temperatures or fire, if opened, or if disassembled. WARNING: Battery may explode if disposed in fire. Use specified power supply and battery only. To prevent injury or burns, do not allow metal objects to contact the charger terminals. There are no user-serviceable parts. Do not disassemble.

Connexion des cables aux ports et prises femelles ............................. xii Entretien de l’appareil photo numérique Leaf Valeo...........................xiii Etiquette d’avertissement sur la batterie............................................xiii Etiquette d’avertissement sur le chargeur ..........................................xiii

Connexion des cables aux ports et prises femelles La connexion des câbles aux ports et prises femelles de l’appareil photo numérique Leaf Valeo s’effectue selon la liste suivante : • Câble de commande de l’appareil photo à la prise femelle (déporté) ; • Câble FireWire au port FireWire sur le périphérique arrière de l’appareil photo numérique ou sur le Leaf Digital Magazine ; • Câble DP-67 au port AUX du périphérique arrière de l’appareil photo numérique Leaf Valeo ; • Câble Flash Sync à la prise femelle Fash Sync ; • Câble Camera-to-Back Sync à la prise femelle Camera-to-Back Sync. ATTENTION: pour réduire le danger de chocs électriques et d’incendie, ne connectez jamais de lignes de communication ou de téléphone à n’importe quel port ou prise femelle de l’appareil photo numérique Leaf Valeo. Prise femelle Camera-to-Back Prise femelle Flash Sync [1] [2] Port AUX. [3] [5] Prise femelle de commande [4] Port FireWire [1] [2] [3] [4] [5] de l’appareil photo Sync

xiii Entretien de l’appareil photo numérique Leaf Valeo Verre protecteur du filtre infrarouge, sur la face inférieure du périphérique arrière de l’appareil photo numérique Leaf Valeo Etiquette d’avertissement sur la batterie L’étiquette d’avertissement est présente sur chaque batterie. ATTENTION Les batteries peuvent exploser, fuir ou prendre feu si elles sont exposées à des températures élevées ou à des flammes, si elles sont ouvertes ou si elles sont démontées. Etiquette d’avertissement sur le chargeur L’étiquette d’avertissement pour le chargeur se trouve sur le chargeur de batterie. AVERTISSEMENT L’appareil peut exploser s’il est détruit par combustion. N’utiliser que l’alimentation et les piles indiquées. Pour éviter tout risque de blessure ou de brûlure, ne placer aucun object métallique en contact avec les broches du chargeur. Les pièces ne sont pas rempiaçables par l’utilisateur. Ne pas démonter. AVERTISSEMENT: ne jamais ouvrir ni démonter n’importe quelle partie du périphérique arrière de l’appareil photo numérique Leaf, en particuler le verre protecteur du filtre infrarouge. (IR) Remarque: pour de plus amples informations relatives au nettoyage du verre protecteur du filtre infrarouge, référez-vous au chapitre Protective IR Filter Glass, dans ce document.

Pflege für den Leaf Valeo-Digitalkamera-Rückteil..............................xvii Batterieschild-Vorsichterklärung .......................................................xvii Ladegerätschild-Warnungserklärung ................................................xvii

Verbinden Sie Kabel mit den Anschlüssen und Buchsen auf dem Leaf Valeo-Digitalkamera-Rückteil gemäß der folgenden Liste: • Camera Control-Kabel zur (entfernten) Camera Control-Buchse • FireWire-Kabel zum FireWire-Anschluss auf dem Leaf Valeo- Digitalkamera-Rückteil oder auf dem Leaf Digital Magazine. • DP-67-Kabel zum AUX-Anschluss des Leaf Valeo-Digitalkamera- Rückteils • Flash Sync-Kabel zur Flash Sync-Buchse • Camera-to Back Sync-Kabel zur Camera-to-Back Sync-Buchse VORSICHT: Um die Gefahr eines elektrischen Schlags und die Gefahr von Feuer zu verringern, verbinden Sie niemals Telefon- oder Fernmelde-Leitungen mit einem Anschluss oder mit einer Buchse auf dem Leaf Valeo-Digitalkamera- Rückteil. Camera-to-Back Flash Sync-Buchse Sync-Buchse [1] [2] AUX.-Anschluss [3] [5] Camera Control-Buchse [4] FireWire-Anschluss [1] [2] [3] [4] [5]

xvii Pflege für den Leaf Valeo-Digitalkamera-Rückteil Schützendes IR-Filterglas auf der Unterseite des Leaf Valeo-Digitalkamera- Rückteils Batterieschild-Vorsichterklärung Die Batterieschild-Vorsichterkärung befindet sich auf jeder Batterie. VORSICHT Die Batterie kann explodieren, auslaufen oder Feuer fangen. wenn sie hohen Temperaturen oder Feuer ausgesetzt, geoffnet öder zerlegt wird. Ladegerätschild-Warnungserklärung Die Ladegerätschild-Warnungserklärung befindet sich auf dem Batterieladegerät. WARNUNG Nicht ins Feuer werfen - Explosionsgefahr! Verwenden Sie nur das spezifizierte Netzteil und den spezifizierten Akku. Verhindern Sie dem Kontakt von Metallteilen mit den Polen des Ladegeräts, um Verletzungen oder Verbrennungen zu vermeiden. Das Gerät enthält keine Teile, die durch den Benutzer gerwartet werden können. WARNUNG: Öffnen oder zerlegen Sie niemals die Leaf Valeo-Digitalkamera- Rückteile, besonders das schützende infrarote (IR) Filterglas. Hinweis: Informationen über Reinigung des schützenden IR-Filterglases finden Sie in Protective IR Filter Glass in diesem Dokument.

seguridad Conexión de cables a puertos y enchufes hembra ............................. xx Cuidado del respaldo para cámaras digitales Leaf Valeo ....................xxi Etiqueta con instrucción de cuidado de la batería..............................xxi Etiqueta de advertencia del cargador ................................................xxi

Conexión de cables a puertos y enchufes hembra Conecte cables a los puertos y enchufes hembra del respaldo para cámaras digitales Leaf Valeo, de acuerdo a la lista a continuación: • Cable de control de la cámara (Camera Control) al enchufe hembra de control de la cámara (Camera Control) (Remoto) • Cable FireWire al puerto FireWire en el respaldo para cámaras digitales Leaf Valeo o en el Leaf Digital Magazine • Cable DP-67 al puerto AUX en el respaldo para cámaras digitales Leaf Valeo • Cable de sincronización del flash (Flash Sync) al enchufe hembra Flash Sync • Cable de sincronización de la cámara al respaldo para cámaras digitales (Camera-to Back Sync) al enchufe hembra Camera-to-Back Sync CUIDADO: Para reducir el peligro de electrochoque y fuego, no se debe conectar líneas de teléfonos o de telecomunicaciones a ninguno de los puertos o enchufes hembra del respaldo para cámaras digitales Leaf Valeo. Enchufe hembra Camera-to-Back Enchufe hembra Flash Sync Sync [1] [2] Puerto AUX. [3] [5] Enchufe hembra Camera Control [4] Puerto FireWire [1] [2] [3] [4] [5]

xxi Cuidado del respaldo para cámaras digitales Leaf Valeo Vidrio del filtro protector contra IR en la parte inferior del respaldo para cámaras digitales Leaf Valeo Etiqueta con instrucción de cuidado de la batería La etiqueta con la instrucción de cuidado de la batería se encuentra en todas las baterías. PRECAUCIÓN La batería podría explotar o arder y su contenido podría derramarse si se expusiera a una temperatura elevada o a fiego, así como si se abriera o se desmontara. Etiqueta de advertencia del cargador La etiqueta de advertencia del cargador está ubicada en el cargador de la batería. ADVERTENCIA Podría explotar si se arrojaraal fuego. Utilice sólo el sistema de alimentación y la bateria especificada. Para evitar heridas o quemaduras, impida que entren en contacto objetos metálicos con los terminales del cargador. No contiene piezas que deba reemplazar el usuario. ADVERTENCIA: No se debe abrir o desmontar nunca ninguna de las partes del respaldo para cámaras digitales de Leaf, especialmente el vidrio del filtro protector contra infrarrojo (IR). Nota: Para información acerca del procedimiento para limpiar el vidrio del filtro protector contra IR, vea Protective IR Filter Glass en este documento.

Connettere cavi a porte e prese jack................................................xxiv Cura del camera back Leaf Valeo digitale .........................................xxv Etichetta di precauzione sulla batteria ..............................................xxv Etichetta di precauzione sul caricabatteria ........................................xxv

Connettere cavi a porte e prese jack Connettete cavi alle porte e prese jack del camera back Leaf Valeo digitale , in base alla lista seguente: • Cavo Camera Control alla presa jack Camera Control (Remote) • Cavo FireWire alla porta FireWire sul camera back Leaf Valeo digitale o al Leaf Digital Magazine • Cavo DP-67 alla porta AUX del camera back Leaf Valeo digitale • Cavo Flash Sync alla presa jack Flash Sync • Cavo Camera-to Back Sync alla presa jack Camera-to-Back Sync AVVERTENZA: Per ridurre il rischio di shock elettrici e incendio, non connettere mai telefono o linee telecommunicazioni ad alcuna delle porte o prese jack del camera back Leaf Valeo digitale. Presa jack Camera-to-Back Sync Presa jack Flash Sync [1] [2] Porta AUX. [3] [5] Presa jack Camera Control [4] Porta FireWire [1] [2] [3] [4] [5]

xxv Cura del camera back Leaf Valeo digitale Vetro di protezione del filtro infrarossi IR sulla parte inferiore del camera back Leaf Valeo digitale Etichetta di precauzione sulla batteria L’etichetta di precauzione è posizionata su ogni batteria. ATTENZIONE La batteria potrebbe esplodere, presentare delle perdite o incendiarsi nel caso venga esposta ad alte temperature o a fiamme, aperta o disassemblata. Etichetta di precauzione sul caricabatteria L’etichetta di precauzione è posizionata su ogni caricabatteria. ATTENZIONE Non esporre alle fiamme, pericolo di esplosione. Utilizzare esclusivamente l’alimentatore e la batteria specificati. Per prevenire bruciature o lesioni alle persone, evitare di porre oggetti metallici a contatto dei terminali in tensione. Nessuna parte può essere riparata e/o sostituita dall’utente. AVVERTENZA: Non aprire mai né smontare alcuna parte del camera back Leaf digitale, in particolare il vetro di protezione del filtro infrarossi (IR). Nota: Per informazioni sulla pulizia del vetro di protezione del filtro infrarossi IR, vedere Protective IR Filter Glass in questo documento.

Cuidados ao back da câmera digital Leaf Valeo ...............................xxix Etiqueta com instrução de cuidado da bateria .................................xxix Etiqueta de advertência do caregador .............................................xxix

Conectando cabos à portas e à jacks Conecte os cabos às portas no back da câmera digital de acordo com a seguinte lista: • Cabo de controle da câmera (Camera Control) no jack do controle da câmera (Camera Control) (remoto) • Cabo FireWireà porta FireWire port no back da câmera digital Leaf Valeo ou no Leaf Digital Magazine • Cabo DP-67 à porta AUX do back da câmera digital Leaf Valeo • Cabo Flash Sync ao jack Flash Sync • Cabo Camera-to Back Sync ao jack Camera-to-Back Sync CUIDADO: Para reduzir o perigo de choque eléctrico e fogo, nunca conecte linhas telefónicas ou de telecomunicações a qualquer porta ou jacks no back da câmera digital Leaf Valeo. Jack Camera-to-Back Jack Flash Sync Sync [1] [2] Porta AUX. [3] [5] Jack Camera Control [4] Porta FireWire [1] [2] [3] [4] [5]

xxix Cuidados ao back da câmera digital Leaf Valeo Vidro de filtro protetor contra infravermelho na parte inferior do back da câmera digital Leaf Valeo. Etiqueta com instrução de cuidado da bateria A etiqueta com instrução de cuidado da bateria está localizada em cada bateria. CUIDADO A bateria poderá explodir, vazar ou pegar fogo se for exposta a atlas temperaturas ou ao fogo, ou se for aberta ou desmontada. Etiqueta de advertência do caregador A etiqueta de advertência do carregador está localizada no carregador da bateria. AVISO Existe a possibilidade de explosão se exposto ao fogo. Use somente cabos de energia e baterias especificas. Para evitar ferimentos ou queimaduras, evite o contato de objetos metálicos com os terminais do carregador. A manutenção das peças não deve ser feita pelo usuário. Náo desmotar. AVISO: Nunca abra ou desmonte nenhuma parte do back da câmera digital, principalmente o vidro do filtro protetor contra infravermelho (IV ). Nota: Para informações sobre como limpar o vidro de filtro protetor contra infravermelho, consulte Protective IR Filter Glass neste documento.

De Leaf Valeo digitale camera achterwand veilig gebruiken ........... xxxiii Waarschuwingslabel voor de batterij ............................................. xxxiii Waarschuwingslabel voor de batterijlader......................................xxxiii

Kabels worden volgens onderstaande lijst aan de poorten en jacks aan de Leaf Valeo digitale camera achterwand aangesloten: • De camera control kabel met de (afgelegen) jack van de camera control • De FireWire kabel met de FireWire poort van de Leaf Valeo digitale camera achterwand of van de Leaf Digital Magazine • De DP-67 kabel met de AUX poort van de Leaf Valeo digitale camera achterwand • De Flash Sync kabel met de Flash Sync jack • De Camera-to Back Sync kabel met de Camera-to-Back Sync jack VOORZICHTIG: om elektrische schokken en vuurgevaar te voorkomen wordt aanbevolen om nooit telefoon of telecommunicatie leidingen aan de poorten of jacks van de Leaf Valeo digitale camera achterwand aan te sluiten. Camera-to-Back Flash Sync jack Sync jack [1] [2] AUX. poort [3] [5] Camera Control jack [4] FireWire poort [1] [2] [3] [4] [5]

xxxiii De Leaf Valeo digitale camera achterwand veilig gebruiken Het IR beschermglas onderaan de Leaf Valeo digitale camera achterwand Waarschuwingslabel voor de batterij Op iedere batterij is het volgende waarschuwingslabel aangebracht. LET OP De batterij kan ontploffen, gaan lekken of vuur vatten wanneer deze word blootgesteld aan vuur of hoge temperaturen, of wordt geopend of uit elkaar wordt gehaald. Waarschuwingslabel voor de batterijlader Op de batterijlader is het volgende waarschuwingsetiket aangebracht. WAARSCHUWING Niet weggooien in vuur. Hierbij bestaat gevaar voor ontploffing. Gebruik alleen met gespecificeerde stroomvoorziening en accu. Ter voorkoming van verwonding of brandwonden, metalen objecten niet in aanraking laten komen met de aansluitcontacten. Geen onderdelen die door de gebruiker kunnen worden onderhouden. Niet demonteren. WAARSCHUWING: open of haal de onderdelen van de Leaf digitale camera achterwand, in het bijzonder het infrarode (IR) beschermglas, nooit uit elkaar. Opmerking: zie voor meer informatie om het IR filterglas te reinigen, Protective IR Filter Glass in dit document.

���� ����������� �������������������������������������� �������������������� �������������������������������� �������� �������������������������������������������� ��������� ������������������������������������������

���� ���� ��� ������������������� • � ����� ������������������������ ������ • ����� ����������������������� • � ���������������������� ������������������� ��� ��� ��� ���������������������������������������� ������������� �������������� �������������� �������������� �������������� ������ ������ ������ ������ ����� ����� ����� ����� [1] [2] ����� ����� ����� ������� �� �� �� [3] [5] ������ ������ ������ ������ [4] ��������� ��������� ��������� ����������� �� �� �� [1] [2] [3] [4] [5]

�������������������� xxxvii �������������������� ��������������� �������� ������������������ ��������� ��������������������� ��� ��� ��� ��������������������������������� ����� ���� ��� ��� ��� ���������������������������������� � �����������������������������

������� ���������������� ���������������������������� ���������������������������� ��������������� ���������������� ���������������������������� ����������������� ��������������������������

������������������������ � �������� ���� • ����������� ���������� ������������� ���� ���� • ���������������� ���������� ����� • ������������������������� ������������������� ��� �� �� ���� �� ���� �� ���� �� ����Leaf ����� ������������������������� ���������������������������������� Camera-to-Back Flash Sync�������� ���� ���� ���� Sync ���� ���� ���� ���� [1] [2] AUX.������� ��� ��� ��� [3] [5] Camera Control ���� ���� ���� ���� [4] FireWire ��� ��� ��� ��� [1] [2] [3] [4] [5]

���������������� ��������������������������� ����������������� ���������������������������� �� �� ��� �� ��� �� ��� �� ����������������������������� ���� ����� ��������������������������� � ��� � ��� � ��� � ����� ����������������������������� �Protective IR Filter Glass�����������

Обслуживание цифровой насадки Leaf Valeo Digital Camera Back...........................................................................................xlv Предупреждение на наклейке батареи ..................................xlv Предупреждение на наклейке зарядного устройства ...........xlv

Подключите кабели к портам и разъёмам цифровой насадки Leaf Valeo digital camera back по следующей схеме: • Кабель дистанционного управления камерой Camera Control - к разъёму Camera Control (Remote) • Кабель FireWire - к порту FireWire цифровой насадки Leaf Valeo digital camera back или Leaf Digital Magazine • Кабель DP-67 - к порту AUX цифровой насадки Leaf Valeo digital camera back • Кабель синхронизации вспышки Flash Sync - к разъёму Flash Sync • Кабель синхронизации камеры и насадки Camera-to-Back Sync - к разъёму Camera-to-Back Sync ВНИМАНИЕ: Во избежание удара электрическим током или воспламене- ния никогда не подключайте телефонные или телекоммуникационные кабели к портам и разъёмам цифровой насадки Leaf Valeo digital camera back. Разъём Camera-to-Back Sync Разъём Flash Sync [1] [2] [3] Разъём AUX [5] Разъём Camera Control [4] Разъём FireWire [1] [2] [3] [4] [5]

xlv Обслуживание цифровой насадки Leaf Valeo Digital Camera Back Защитное стекло инфракрасного фильтра с нижней стороны цифровой насадки Leaf Valeo digital camera back Предупреждение на наклейке батареи На каждой батарее имеется наклейка с предупредительной надписью. Предупреждение на наклейке зарядного устройства На зарядном устройстве имеется наклейка с предупредительной надписью. ПРЕДУПРЕЖДЕНИЕ: Не открывайте и не разбирайте частей цифровой насадки Leaf Valeo digital camera back, в особенности защитное стекло инфракрасного (ИК) фильтра. Примечание: Процедура очистки защитного стекла инфракрасного фильтра приведена в разделе Protective IR Filter Glass настоящего документа.

Product Overview................................................................................2

About This Document This document includes general instructions for installing a Leaf Valeo digital camera back on your camera. It includes detailed instructions for each camera type. It also describes how to install and use the contents of the Leaf Portable kit. Product Overview A Leaf Valeo digital camera back, attached to your camera in place of a film back, captures color images in a single exposure under any type of lighting. A Leaf Valeo digital camera back can be tethered to a computer or used portably. And with the latest Bluetooth® technology, the Leaf DP-67 (iPAQ) can communicate remotely with the Leaf Valeo digital camera back, offering you even more freedom of movement. For software installation procedures, see the Leaf Capture V8 and Leaf DP-67 Portable Application Installation Guide. Note: The Leaf Capture V8 application and the Leaf DP-67 Portable application (which are both supplied with your Leaf Valeo digital camera back) enable you to capture, view, and manipulate an image so that you can produce a finished product in a single session.

Attaching the Repeater .......................................................................5

Connecting the FireWire Cable The FireWire cable (IEEE 1394A) links the computer to the Leaf digital camera back. The cable carries both communication signals and electrical power. The cable is a hot-plug cable that can be connected or disconnected without turning the computer off or quitting the application. 1. Connect one end of the FireWire cable to the port at the bottom of the Leaf digital camera back. Make sure that the side of the FireWire cable connector with the silver line faces the silver line on the FireWire port on the Leaf digital camera back. Connecting FireWire cable to Leaf Valeo digital camera back 2. Connect the other end of the cable to the port on the computer. Important: The information in this chapter is relevant to all cameras in this installation guide. Follow the specific installation procedures for the camera you are using. It is important that you connect the FireWire cable correctly in order not to cause unnecessary damage. To avoid connection problems, use only the Leaf FireWire cable and repeater supplied with the Leaf digital camera back. FireWire indication mark Note: When connecting the FireWire cable, make sure that the silver line on the FireWire cable is aligned with the silver line above the FireWire port.

5 Attaching the Repeater 1. Connect one of the FireWire cables from the computer to the single- side connection of the repeater. 2. Connect the other FireWire cable from the Leaf digital camera back to one of the ports on the double-side connection of the repeater. Attaching repeater Tip: When you connect the FireWire cable after you start the Leaf Capture V8 application, the software automatically connects to the Leaf digital camera back and recognizes the connected camera type. Notes: Attaching the repeater is optional. If you want to extend the FireWire cable from 4.5m / 15 ft. to 9m / 30 ft., you can purchase the Leaf Repeater and Cable Kit. Note: To comply with the CE/FCC standard regulations, it is recommended to use the FireWire cables that are supplied by Leaf.

Before Getting Started ........................................................................8 Items Required for the Installation.......................................................8 Quick Installation Reference ................................................................9 Installing the Focusing Screen............................................................10 Attaching the Leaf Digital Camera Back to the Camera Body.............12 Connecting the Cables......................................................................13 Removing the Leaf Digital Camera Back From the Camera Body........14

Before Getting Started This chapter describes the Leaf Valeo digital camera back installation as it applies to the Mamiya 645 AF-D camera. Items Required for the Installation The following table describes what is included in the Leaf Valeo digital camera back kit for the Mamiya 645 AF-D camera and which items in the kit are required for the installation. Important: To avoid installation and operation problems, use only the accessories supplied in the Leaf digital camera back kit. Kit Contents Required for Installation Leaf Valeo digital camera back with Mamiya AF-D mount Yes FireWire cable (4.5 m / 15 ft.) Yes Focusing screen Yes Tweezers for focusing screen handling Yes Leaf DM FireWire cable (15 cm / 6 in.) Yes Leaf Capture V8 software CD Yes Documentation (Leaf documentation CD and printed documentation) Yes Cleaning supplies (isopropyl alcohol, cleaning wipes, tweezers) (keep on hand) Diffusion filter No Gray card (18%) No

9 Quick Installation Reference 1. Install the focusing screen. 2. Remove the protective cover from the Leaf digital camera back and mount the back onto the camera body. 3. Install the Leaf Capture V8 application from the CD. 4. Start the Leaf Capture V8 application. 5. Connect the FireWire cable between the computer and the Leaf digital camera back. After you connect the cable, the application automatically connects to the Leaf digital camera back. When the connection is established, the LED indicator on the Leaf digital camera back turns from orange to green. (left) Leaf Valeo digital camera back ports and jacks (right) Leaf Valeo digital camera back on Mamiya 645 AF-D camera Note: If you want to work with an external flash or strobe, connect the Flash Sync cable between the camera and the flash or strobe unit. Camera-to-Back Flash Sync jack Sync jack [1] [2] AUX. port [3] [5] Camera Control jack [4] FireWire port [1] [2] [3] [4] [5]

Installation Procedures The procedures in this section together constitute the basic installation process. Installing the Focusing Screen The focusing screen enables you to view the exact area that the Leaf digital camera back captures. Before you can install the supplied focusing screen, you must remove the camera’s original focusing screen. To remove the original focusing screen: 1. Remove the lens. 2. Using the supplied tweezers, pull the focusing screen release lever [A] located inside the lens mount (upper center) to release the focusing screen. Pulling focusing screen release lever

by grasping the tab on the edge of the screen with the tweezers, and then gently pulling up and out. Removing original focusing screen To attach the supplied focusing screen: 1. Using the supplied tweezers, hold the focusing screen tab and place the focusing screen on the focusing screen frame. Installing supplied focusing screen Important: Be careful not to touch or damage the mirror.

2. Using the tweezers, push the focusing screen frame upwards until you hear a click. The focusing screen is now installed. Attaching the Leaf Digital Camera Back to the Camera Body 1. Mount the Mamiya 645 AF-D camera body on a tripod. 2. Remove the protective cover plate from the Leaf digital camera back. 3. Align the groove on the Leaf digital camera back with the holder bracket on the camera body, and then bring the top of the Leaf digital camera back to the camera body. 4. Push the top of the Leaf digital camera back toward the camera body until it locks into place. Attaching Leaf Valeo digital camera back to Mamiya 645 camera body Important: Never apply pressure on other parts as this might affect focus. Handle the focusing screen surfaces with care. They are delicate and easily damaged. Never touch the surface of the focusing screen. If there is dust on the screen, use a blower or soft lens brush to remove it. If the focusing screen needs more thorough cleaning, contact the nearest authorized Mamiya service center. Do not attempt to clean the focusing screen yourself.

Connecting the Flash Sync Cable � If you want to use flash or strobe lighting, connect the Flash Sync cable to the Flash Sync jack of the Mamiya 645 AF-D camera. Connecting the Flash Sync cable to the Mamiya 645 AF-D camera Connecting the FireWire Cable For information about connecting the FireWire cable, see Chapter 2, Connecting the FireWire Cable . Flash Sync jack Flash Sync cable

Removing the Leaf Digital Camera Back From the Camera Body 1. Place the camera on a steady, flat surface. 2. Turn the camera off. 3. Disconnect the FireWire cable. 4. Slide and press the Release button on the Leaf Valeo digital camera back to the left side. Removing Leaf digital camera back from Mamiya 645 AF-D camera 5. Tilt the camera back away from the camera body to remove it. Release button

Before Getting Started ......................................................................16 Quick Installation Reference ..............................................................17 Installation Procedures ......................................................................18 Attaching the Leaf Digital Camera Back to the Camera Body.............19 Connecting the Cables......................................................................20 Removing the Leaf Digital Camera Back From the Camera Body........21

Before Getting Started This chapter describes the Leaf Valeo digital camera back installation as it applies to the Contax 645 AF camera. Items Required for the Installation The following table describes what is included in the Leaf Valeo digital camera back kit for the Contax 645 AF camera and which items in the kit are required for the installation. Important: To avoid installation and operation problems, use only the accessories supplied in the Leaf digital camera back kit. Kit Contents Required for Installation Leaf Valeo digital camera back with Contax 645 AF mount Yes FireWire cable (4.5 m / 15 ft.) Yes Focusing screen Yes Leaf DM FireWire cable (15 cm / 6 in.) Yes Leaf Capture V8 software CD Yes Documentation (Leaf documentation CD and printed documentation) Yes Cleaning supplies (isopropyl alcohol, cleaning wipes, tweezers) (keep on hand) Diffusion filter No Gray card (18%) No

17 Quick Installation Reference 1. Install the focusing screen. 2. Remove the protective cover from the Leaf digital camera back and mount the back onto the camera body. 3. Install the Leaf Capture V8 application from the CD. 4. Start the Leaf Capture V8 application. 5. Connect the FireWire cable between the computer and the Leaf digital camera back. After you connect the cable, the application automatically connects to the Leaf digital camera back. When the connection is established, the LED indicator on the Leaf digital camera back turns from orange to green. (left) Leaf Valeo digital camera back ports and jacks (right) Leaf digital camera back on Contax 645AF camera Note: If you want to work with an external flash or strobe, connect the Flash Sync cable between the camera and the flash or strobe unit. Camera-to-Back Flash Sync jack Sync jack [1] [2] AUX. port [3] [5] Camera Control jack [4] FireWire port [1] [2] [3] [4] [5]

Installation Procedures The procedures in this section together constitute the basic installation process. Installing the Focusing Screen The focusing screen enables you to view the exact area that the Leaf digital camera back captures. Before you can install the supplied focusing screen, you must remove the camera’s original focusing screen. To remove the original focusing screen: 1. Remove the Contax viewfinder. 2. Pick up the screen frame claw with your finger tip, and pull it gently upwards to remove the focusing screen. To install the supplied focusing screen: 1. Insert the edge of the focusing screen underneath the screen pressing spring. Installing focusing screen

click. Attaching the Leaf Digital Camera Back to the Camera Body 1. Mount the Contax 645 AF camera body on a tripod. 2. Remove the protective cover plate from the Leaf digital camera back. 3. Attach the Leaf digital camera back to the camera body by moving the Leaf digital camera back toward the camera body and check that the camera’s support hooks fit into the slots on the Leaf digital camera back. 4. Push the top of the Leaf digital camera back toward the camera body until it locks into place. Attaching Leaf digital camera back to Contax 645 AF camera body Important: Do not press or bend the screen pressing spring directly, it may damage the camera. Never touch the surface of the focusing screen. If there is dust on the screen, use a blower or soft lens brush to remove it. Store unused focusing screens in the screen case according to the instructions on the case.

Connecting the Cables Connecting the Flash Sync Cable � Connect the Flash Sync cable to the Flash Sync jack of the Contax 645 AF. Connecting Flash Sync cable to Contax 645 AF Connecting the FireWire Cable For information about the connecting the FireWire cable, see Chapter 2, Connecting the FireWire Cable. Note: Connecting the Flash Sync cable is optional. Flash Sync cable Flash Sync jack

1. Place the camera on a steady, flat surface. 2. Turn the camera off. 3. Disconnect the FireWire cable. 4. Slide and press the Release button on the Leaf Valeo digital camera back to the left side. Removing Leaf digital camera back from Contax 645 AF camera 5. Tilt the camera back away from the camera body to remove it.

Items Required for the Installation.....................................................24 Quick Installation Reference ..............................................................25 Installation Procedures ......................................................................26 Attaching the Leaf Digital Camera Back to the Camera Body.............27 Connecting the Cables......................................................................28 Removing the Leaf Digital Camera Back From the Camera Body........29

Before Getting Started This chapter describes the Leaf Valeo digital camera back installation as it applies to the Hasselblad H1 camera. Items Required for the Installation The following table describes what is included in the Leaf Valeo digital camera back kit for the Hasselblad H1 camera and which items in the kit are required for the installation. Important: To avoid installation and operation problems, use only the accessories supplied in the Leaf digital camera back kit. Kit Contents Required for Installation Leaf Valeo digital camera back with Hasselblad H1 mount Yes FireWire cable (4.5 m / 15 ft.) Yes Focusing screen Yes Leaf DM FireWire cable (15 cm / 6 in.) Yes Leaf Capture V8 software CD Yes Documentation (Leaf documentation CD and printed documentation) Yes Cleaning supplies (isopropyl alcohol, cleaning wipes, tweezers) (keep on hand) Diffusion filter No Gray card (18%) No

25 Quick Installation Reference 1. Install the focusing screen. 2. Remove the protective cover from the Leaf digital camera back and mount the back onto the camera body. 3. Install the Leaf Capture V8 application from the CD. 4. Start the Leaf Capture V8 application. 5. Connect the FireWire cable between the computer and the Leaf digital camera back. After you connect the cable, the application automatically connects to the Leaf digital camera back. When the connection is established, the LED indicator on the Leaf digital camera back turns from orange to green. (left) Leaf Valeo digital camera back ports and jacks (right) Leaf Valeo digital camera back on Hasselblad H1 camera body Note: If you want to work with an external flash or strobe, connect the Flash Sync cable between the camera and the flash or strobe unit. Camera-to-Back Flash Sync jack Sync jack [1] [2] AUX. port [3] [5] Camera Control jack [4] FireWire port [1] [2] [3] [4] [5]

Installation Procedures The procedures in this section together constitute the basic installation process. Installing the Focusing Screen The focusing screen enables you to view the exact area that the Leaf digital camera back captures. Before you can install the supplied focusing screen, you must remove the camera’s original viewfinder screen. To remove the original viewfinder screen:. 1. Remove the Hasselblad viewfinder. 2. Place a pointed instrument into the viewfinder screen removal lug, and pull upwards to remove the viewfinder screen. To install the focusing screen: 1. Position the right side of the focusing screen so that it sits correctly in the recess. 2. Place the tip of a pointed instrument into the viewfinder screen replacement indentation, and then press downwards until the viewfinder screen snaps into place. Focusing screen installation

1. Mount the camera body on a tripod. 2. Remove the protective cover plate from the Leaf digital camera back. 3. Position the magazine retention groove onto the magazine support on the camera body. 4. Swing the Leaf digital camera back toward the camera body and firmly press it into place until you hear a click. Attaching the Leaf digital camera back to the camera body Important: Never touch the surface of the focusing screen. If there is dust on the screen, use a blower or soft lens brush to remove it. Store unused focusing screens in the screen case according to the instructions on the case.

Connecting the Cables Connecting the Flash Sync Cable � Connect the Flash Sync cable to the Flash Sync jack of the Hasselblad H1 casmera body. Connecting Flash Sync cable to Hasselblad H1 Connecting the FireWire Cable For information about connecting the FireWire cable, see Chapter 2, Connecting the FireWire Cable. Note: Connecting the Flash Sync cable is optional. Flash Sync cable Flash Sync jack

1. Place the camera on a steady, flat surface. 2. Turn the camera off. 3. Disconnect the FireWire cable. 4. Press gently on the center of the magazine release button, twist it clockwise until it stops (1), and then press the button firmly inwards toward the camera body (2) to release the Leaf digital camera back. Removing Leaf digital camera back from Hasselblad H1 camera Important: Make sure to press on the center of the magazine release button, not on the lever. 1 2

Horseman DigiFlex II Before Getting Started ......................................................................32 Items Required for the Installation.....................................................32 Quick Installation Reference ..............................................................33 Installation Procedures ......................................................................35 Installing the Focusing Screen Mask ..................................................35 Attaching the Leaf Digital Camera Back to the Camera Body.............36 Connecting the Cables......................................................................38 Removing the Leaf Digital Camera Back From the Camera Body........41

Before Getting Started This chapter describes the Leaf Valeo digital camera back installation as it applies to Hasselblad (500 series) and Horseman DigiFlex II cameras. Items Required for the Installation The following table describes what is included in the Leaf Valeo digital camera back kit for the Hasselblad (500 series) and for the Horseman Digiflex II cameras and which items in the kit are required for the installation. Important: To avoid installation and operation problems, use only the accessories supplied in the Leaf digital camera back kit. Kit Contents Required for Installation Leaf Valeo digital camera back with Hasselblad mount Yes FireWire cable (4.5 m / 15 ft.) Yes Focusing screen mask Yes Leaf DM FireWire cable (18 cm / 7 in.) Yes Leaf DM FireWire cable (25 cm / 10 in.) Yes Leaf Capture V8 software CD Yes Documentation (Leaf documentation CD and printed documentation) Yes Cleaning supplies (isopropyl alcohol, cleaning wipes, tweezers) (keep on hand) Diffusion filter No Gray card (18%) No

33 Quick Installation Reference 1. Hasselblad (500 series) users—Install the focusing screen mask into the viewfinder. 2. Remove the protective cover from the Leaf digital camera back and mount the back onto the camera body. 3. Hasselblad (500 series) users—Connect the Camera-to-Back Sync cable between the camera lens and Leaf digital camera back. 4. Install the Leaf Capture V8 application from the CD. 5. Start the Leaf Capture V8 application. 6. Connect the FireWire cable between the computer and the Leaf digital camera back. After youconnect the cable, the application automatically connects to the Leaf digital camera back. When the connection is established, the LED indicator on the Leaf digital camera back turns from orange to green. Notes: If you want to work with an external flash or strobe, connect the Flash Sync cable between the camera and the flash or strobe unit. For Hasselblad 553ELX, and 500EL/M, 503CW + winder users—To trigger the camera from the computer, connect the Camera Control cable (not supplied with the camera back) between the camera body and the Leaf digital camera back. For Hasselblad (500 series) users—When working in B-mode, the camera release button must be in Film position.

(left) Leaf Valeo digital camera back ports and jacks (right) Leaf Valeo digital camera back with Hasselblad (500 series) camera Camera-to-Back Flash Sync jack Sync jack [1] [2] AUX. port [3] [5] Camera Control jack [4] FireWire port [1] [2] [3] [4] [5]

process. Installing the Focusing Screen Mask The focusing screen mask enables you to view the exact area that the Leaf digital camera back captures. 1. Remove the viewfinder from the camera body according to the manufacturer’s instructions. 2. Place the focusing screen mask on top of the Hasselblad focusing screen. 3. Reinstall the camera viewfinder. Installing Hasselblad focusing screen mask Note: This procedure is for Hasselblad (500 series) users only.

Attaching the Leaf Digital Camera Back to the Camera Body 1. Mount the Hasselblad or Horseman DigiFlex II camera on a tripod. 2. Remove the protective cover plate from the Leaf digital camera back. 3. Connect the Leaf digital camera back to the camera body in either portrait or landscape orientation. Rest the Leaf digital camera back on the lower supports making sure that the lugs are properly engaged in the recesses. 4. Move the digital back toward the camera body and check that the upper support hooks on the camera fit into the slots on the Leaf digital camera back, and lock it into place. Connecting Leaf digital camera back to camera body Note: The Horseman DigiFlex II supports landscape orientation only.

orientation, remove the Leaf digital camera back and rotate it 90° counterclockwise, then attach it again to the camera body. For Hasselblad 555 ELD users—Insert the Release button into the Dig Release port. Important: For Horseman DigiFlex II users—Set the ID selector at the bottom of the camera to zero (0).

Connecting the Cables Connecting the Camera-to-Back Sync Cable 1. Insert one end of the Camera-to-Back Sync cable into the Hasselblad Lens Flash jack. 2. Insert the other end of the cable into the Camera-to-Back Sync jack on the Leaf digital camera back. Connecting Camera-to-Back Sync cable to Leaf Valeo digital camera back Connecting the Flash Sync Cable � Connect the Flash Sync cable to the Flash Sync jack on the Leaf digital camera back. Connecting Flash Sync cable to Leaf Valeo digital camera back Note: This section is for users of Hasselblad 553ELX, 503CW + winder, and 503EL-M cameras only. The Horseman DigiFlex II camera does not require the Camera-to- Back Sync cable.

1. Insert one end of the cable into the Hasselblad Remote Control socket. Connecting Camera Control cable to Hasselblad 553ELX/500 EL-M camera Connecting Camera Control cable to Hasselblad 503CW camera 2. Insert the opposite end of the cable into the Camera Control jack on the Leaf digital camera back. Notes: The Camera Control cable is not required with Hasselblad 555ELD or Horseman DigiFlex II cameras. The Camera Control cable should be used in Remote mode only when capturing with the Leaf digital camera back from the application. The Camera Control cable is not supplied with the Leaf digital camera back. It can be ordered separately.

Connecting Camera Control cable to Leaf Valeo digital camera back Connecting the FireWire Cable For information about connecting the FireWire cable, see Chapter 2, Connecting the FireWire Cable.

1. Place the camera on a flat, steady surface. 2. If any of the following cables are connected, disconnect them: • FireWire cable • Camera-to-Back Sync cable • Flash Sync cable 3. Slide the Release button to the right side. Removing Leaf Valeo digital camera back from Hasselblad camera 4. Tilt the Leaf digital camera back away from the camera body, and then remove it. Release button

Quick Installation Reference ..............................................................45 Installation Procedures ......................................................................47 Installing the Focusing Screen Mask ..................................................47 Attaching the Leaf Digital Camera Back to the Camera Body.............48 Connecting the Cables......................................................................50 Removing the Leaf Digital Camera Back From the Camera Body........52

Before Getting Started This chapter describes the Leaf Valeo digital camera back installation as it applies to the Mamiya RZ67 camera. Items Required for the Installation The following table describes the items you need to install the Leaf Valeo digital camera back on a Mamiya RZ67 camera. The items can be found in the Leaf Valeo with Hasselblad Mount Kit and in the Mamiya RZ Interface Kit. * available in the Mamiya RZ Interface Kit Important: To avoid installation and operation problems, use only the accessories supplied in the Leaf digital camera back kit. Kit Contents Required for Installation Leaf Valeo digital camera back with Hasselblad mount Yes FireWire cable (4.5 m / 15 ft.) Yes Mamiya RZ67 adaptor plate* Yes Focusing screen mask* Yes Leaf DM FireWire cable (25 cm / 10 in.) Yes Leaf Capture V8 software CD Yes Documentation (Leaf documentation CD and printed documentation) Yes Cleaning supplies (isopropyl alcohol, cleaning wipes, tweezers) (keep on hand) Diffusion filter No Gray card (18%) No Note: The Hand Release cable and the Camera Control cable are only supplied in the Mamiya RZ Interface Kit for Valeo 6. The Camera Control cable is sold separately for other Leaf Valeo digital camera backs.

45 Quick Installation Reference 1. Install the focusing screen mask into the viewfinder. 2. Mount the adaptor plate on the camera body. 3. Remove the protective cover from the Leaf digital camera back. 4. Attach the Leaf digital camera back on the adaptor plate. 5. Connect the Camera-to-Back Sync cable between the camera lens and Leaf digital camera back. 6. Install the Leaf Capture V8 application from the CD. 7. Start the Leaf Capture V8 application. 8. Connect the FireWire cable between the computer and the Leaf digital camera back. After you connect the cable, the application automatically connects to the Leaf digital camera back. When the connection is established, the LED indicator on the Leaf digital camera back turns fromorange to green. Notes: If you want to work with external flash or strobe, connect the Flash Sync cable between the Leaf digital camera back and the flash or strobe unit. To trigger the camera from the computer, connect the Camera Control cable (not supplied with the camera back) between the camera body and the Leaf digital camera back. For Valeo 6 users—Connect the Camera Control cable between the camera body and the Leaf digital camera back, and then connect the Hand Release cable to the Hand Release jack in the Mamiya adaptor plate.

(left) Leaf Valeo digital camera back ports and jacks (right) Leaf Valeo digital camera back on Mamiya RZ67 Camera Camera-to-Back Flash Sync jack Sync jack [1] [2] AUX. port [3] [5] Camera Control jack [4] FireWire port [1] [2] [3] [4] [5]

process. Installing the Focusing Screen Mask The focusing screen mask enables you to view the exact area that the Leaf digital camera back captures. 1. Remove the viewfinder from the camera body according to the manufacturer’s instructions. 2. � For Valeo 6 and Valeo 11 users: Place the focusing screen mask on top of the Mamiya RZ67 focusing screen, and make sure the mask is placed under the slots on both sides. � For Valeo 22 users: Remove the Mamiya RZ67 focusing screen, and then replace it with the supplied focusing screen. 3. Reinstall the viewfinder on the camera body according to the manufacturer’s instructions. Installing focusing screen mask to Mamiya RZ67 camera

Attaching the Leaf Digital Camera Back to the Camera Body 1. Mount the Mamiya RZ67 camera on a tripod. 2. Insert the four studs on the Mamiya camera body into the four holes on the Mamiya adaptor. Connecting Leaf Valeo digital camera back to Mamiya RZ67 camera 3. Secure the adaptor plate to the camera body by flipping the locking lever from right to left into the locked position. 4. Remove the protective cover from the Leaf digital camera back. 5. Connect the Leaf digital camera back to the camera body. Rest the Leaf digital camera back on the lower supports making sure that the lugs are properly engaged in the recesses. 6. Move the Leaf digital camera back toward the camera body and check that the camera’s upper support hooks fit into the slots on the Leaf digital camera back, and lock it into place. 7. Lock the Leaf digital camera back into place. Locking lever

To change the orientation of the Leaf digital camera back: 1. Switch the Multiple/Revolving lever on the side of the Mamiya RZ67 camera to R position. 2. To switch from landscape to portrait orientation, gently rotate the Leaf digital camera back 90° clockwise until it snaps into place. Multiple/ Lever Revolving Note: Make sure the Multiple/Revolving lever is set to Manual.

Connecting the Cables This section contains procedures for connecting various cables for use with the Mamiya RZ67 camera. Connecting the Camera Control Cable 1. Insert one end of the Camera Control cable (lever facing down) into the Mamiya release jack on the front of the camera. 2. Turn the lever to the L position to lock it. 3. Insert the opposite end of the cable into the Camera Control socket on the Leaf digital camera back. Connecting Camera Control Cable to Leaf digital camera back Note: Make sure the lever on the Camera Control cable is in O position.

1. Insert one end of the Camera-to-Back Sync cable into the Mamiya Lens Flash jack. 2. Insert the other end of the cable into the Camera-to-Back Sync jack on the adaptor plate. Connecting Camera-to-Back Sync cable to Leaf digital camera back Connecting the Hand Release Cable 1. Insert one end of the Hand Release cable into the Hand Release jack on the Mamiya adaptor plate. Connecting Hand Release cable to Mamiya adaptor plate Notes: This procedure is for Leaf Valeo 6 users only. Do not change the Hand Release mode to the LT mode. Hand Release jack