Legacy LR-180D Instruction Manual

WITH AM/FM TUNING RADIO SPECIFICATION GENERAL Power Supply Requirements............................DC 12 Volts. Negative Ground Chassis Dimensions.................................................181(W)X147(D)X53(H) FM SECTION Frequency Range...............................................................88MHz-108MHz AM SECTION Frequency Range............................................................530KHz-1700KHz LR-180D INSTRUCTION MANUAL LEGACY + - - + ANTENNA JACK LEFT SPEAKER GREEN GROUND GREY RIGHT SPEAKER RED PINK B+ MEMORY FUSE 3A FUSE 0.5A TO +12V BATTERY WIRING CONNECTION BLACK RED RCA LINE OUT R L WHITE

13.LED INDICATORS 11.LCD( LIQUID CRYSTAL DISPLAY) 12.CD IN JACK 9.BAND BUTTON Press it to select you desired radio band and the word which is selected will be indicated on LCD. 10.CLOCK ADJUSTMENT BUTTON When the time appeared on LCD, press the S button and the H button together at the same time to adjust hour, when adjustment is completed release both buttons. When the time displayed on LCD, press the S button and the M button together at the same time to adjust minute. When adjustment is completed, release both buttons. 1. SELECT BUTTON Press it can select VOL/BAS/TRE/BAL. And with the +/- to adjust volume, treble, bass,balance. And the word which function it is selected will be indicated. 2. LOUDNESS BUTTON Press it to get the best loudness quality during it is for bass. And LOUD (lamp) which will be indicated. 3.EJECT BUTTONS Push it half way in to fast forward the tape, and fully in to eject the tape. 5. TUNING KNOB Rotate this knob to get your desired broadcasting station. 4. LO/DX BUTTON Press this button for distance reception when you are located at weak signal location. Depress this button for stronger signal. 6. RELEASE BUTTON Press it to eject the front panel from the unit. 7. POWER BUTTON Press it to turn on or off the unit. 8. MONO/STEREO BUTTON Press it to change sound effect.( MONO KEEP REMAIN) INSTALLATION