LENCO DVT-2201 Manual 

Table of Contents Important Safety Instructions .............................................................................2 View of Unit ..........................................................................................................4 Installing the DVD Module...................................................................................7 Disc Information...................................................................................................8 Remote Control....................................................................................................9 System Connections .........................................................................................13 Connecting to Power Supply................................................................................13 Connecting to an External AV Signal Source (Composite/S-Video) .....................13 Connecting to an External AV Signal Source (YPbPr)..........................................14 Connecting to an HDMI Signal Source ................................................................14 Connecting to a PC..............................................................................................15 Connecting to a SCART signal source.................................................................16 Connecting to TV Signal ......................................................................................16 Source Selecting................................................................................................17 TV Function ........................................................................................................18 Preparation ..........................................................................................................18 Video Setting........................................................................................................18 Audio Setting........................................................................................................20 Misc Setting .........................................................................................................21 TV Setting ............................................................................................................23 Geometric Setting (VGA mode only) ....................................................................26 NICAM Function.................................................................................................28 TELETEXT Function ..........................................................................................29 DVD Playback Operation...................................................................................30 USB and SD/MS/MMC Card Function...............................................................35 DVD System Setup.............................................................................................36 Troubleshooting.................................................................................................44 Specifications.....................................................................................................45

Important Safety Instructions Caution: use of any controls, adjustments, or procedures other than those specified herein may result in hazardous radiation exposure. Caution 1. The product contains a low-power device. In order to ensure the safety of the laser device, do not remove any cover and attempt to repair the unit. If any service is needed, please contact the distributor or its authorised service centre. 2. To reduce the risk of electric shock, do not remove the cover (back). No user-serviceable parts inside. Refer servicing to qualified service personnel. Unplug the product from the wall outlet before servicing or when it is unused for a long period of time. 3. The manufacturer will not be held responsible for the damage caused by any substitutions and modification of the product without authorisation from the manufacturer’s or authorised service agent. WARNING The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Copyright Protection This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorised by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorised by Macrovision. Reverse engineering or disassembly is prohibited. This symbol indicates that dangerous voltage instituting a risk of electric shock is present within this unit. This symbol indicates that there are important operation and maintenance instructions in the literature accompanying the appliance. Caution: Laser radiation when open. Do not stare into beam.

Important Safety Instructions 1. Read these instructions 2. Keep these instructions 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. 8. Install according to the manufacturer instructions. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 9. Read, heed and follow all instructions to ensure correct and safe installation and interconnection of the apparatus; 10. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. 11. The mains socket-outlet shall be installed near the apparatus and the mains plug shall remain readily operable. 12. Protect the power cord from being walked on or pinched particularly at plugs, power sockets, and the point where they exit from the apparatus. 13. Only use attachments/accessories specified by the manufacturer. 14. Use only with stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. 15. Unplug the apparatus during lightning storms or when unused for long periods of time. 16. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Note: Do not touch the colour TFT LCD screen directly by hand. The images in this manual are for reference only and may differ from your model. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. DANGER: Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3. CAUTION: Do not open the back cover. There are no user serviceable parts inside the unit. Leave all servicing to qualified service personnel.

View Of Unit Front and Right View 1. Color TFT screen Color TFT screen to clearly show the data. 2. Disc Tray Slot Insert a disc into this slot. 3. USB Port To connect an external USB device. 4. SD/MS/MMC card port Insert an SD/MS/MMC card into this slot. 5. ► PLAY button In DVD mode, press this button to play the disc. 6. � � � � STOP button In DVD mode, press this button once to stop playback, and then press the ► PLAY button to resume normal playback. Press this button twice repeatedly to stop completely. 7. EJECT button In DVD mode, press this button to eject the disc. 8. CH ▲/▼ button In TV mode, press this button to select channels. In setup menu, the same function as the ▲▼ direction buttons.

View Of Unit Front and Right View 9. VOL ▲/▼ button Press this button to decrease or increase the volume. In setup menu, the same function as the ◄/►direction buttons. 10. POWER button Press this button to enter or exit the standby mode. 11. MENU button Press this button to enter or exit system setup menu. 12. SOURCE button Press this button repeatedly to select the input mode, choose from: TV, SCART, Composite, S-Video, YpbPr, VGA, HDMI and DVD. 13. Remote Sensor 14. Power Indicator The light is blue while the system is active and red while the system is in standby. 15. Speakers NOTE: The “� STOP”, “► PLAY”, “ EJECT” buttons are only available when the DVD module is installed.

View Of Unit Rear View Open the back cover on the right side of the unit’s rear panel and all the connecting jacks will appear, as shown on the below figure: 1. VIDEO/S-VIDEO and L/R audio Input Jacks To connect an audio and video/S-Video signal source in Composite/S-Video mode. Video and S-Video share L/R audio jacks and S-Video has the priority. 2. SCART Jack To connect a SCART signal source. 3. Y/Pr(Cr)/Pb(Cb) and L/R audio Input Jacks To connect a Y/Pr(Cr)/Pb(Cb) signal source in YPbPr mode. 4. Power Supply Cord To connect the power supply. 5. VGA Input Jack To connect a VGA signal source in VGA mode. 6. TV Signal Input Jack To connect a TV antenna or analog cable in TV mode. 7. HDMI Jack To connect an HDMI signal source.

Installing the DVD Module This TV set comes equipped with a removable DVD module. Please follow the procedures below to remove or install the DVD module, this is for service purpose only. Note: Before removing or installing the DVD module, ensure that the television is turned off and that the main plug is removed from the wall socket. DVD module removal: Refer to the illustration below and follow the procedures below to remove the DVD module from the unit: 1. Loosen the screw on the DVD module. 2. Carefully slide the DVD module along the rails and unplug the connecting cord from the LCD TV. 3. Slide the DVD module along the rails to fully remove the DVD module. DVD module installation: 1. Plug the connecting cord into the DVD module. 2. Carefully slide the module into the desired position and lock the module with one screw.

Disc Information Discs Supported DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) 242min(SS-DL) 266min(DS-SL) DVD Audio+Video (active picture) 12cm 484min(DS-DL) CD Audio 12cm 74min JPEG Still high resolution 12cm MP3 Audio 12cm MPEG 4 Audio+Video (active picture) 12cm � Operating systems and features of individual DVD discs are specified by the software maker. Please refer to the instructions accompanying the disc. About Disc Terms Titles A DVD disc is often divided into TITLES. A title can be a separate item or a segment of a film. On many discs the ROOT menu and the TITLE menu are the same. Chapters Each TITLE is subdivided into CHAPTERS and each chapter is numbered for easy searching. So by knowing the right command, you can play the whole disc, or any part of the disc. Tracks Picture and music CDs are divided into TRACKS. Each track is numbered for searching.

Remote Control Preparation of the Remote Control Softly push the clip of the back cover to open the battery compartment. Insert two batteries (1.5V, size AAA), please make sure the polarity matches the marks inside the compartment. Softly press the back cover to close it. � Under normal use the battery will last for six months. � Take out the batteries when the remote is not in use for a long time. Using of the Remote control Point the remote control unit from no more than about 7m from the remote control sensor and within about 60 degrees of the front of the unit. • The operating distance may vary depending on the brightness around. Notes: • Do not point bright lights directly at the remote control sensor. • Do not place objects between the remote control unit and the remote control sensor. • Do not use this remote control unit while simultaneously operating the remote control unit of any other equipment.

Remote Control Remote Control Drawing 1. POWER button Press to enter or exit the standby mode. 2. TV button Press to enter TV mode. 3. DVD button Press to enter DVD mode. 4. ASPECT button Press to select the picture size: choose from Auto, Full and 4:3. 5. SLEEP button Press repeatedly to select the sleep time and Off. 6. 0~9 Number buttons Press to select numbers. 7. button In TV mode, press to return to the channel last viewed. 8. PICTURE button Press to select the video display mode: choose from User, Cinema, Normal, Vivid, and Hi-Bright. 9. VOL +/- button Press to increase or decrease the volume. 10. MUTE button Press to turn on or off the speaker output. 11. INPUT button Press repeatedly to select the input source, choose from: TV, SCART, Composite, S-Video, YPbPr, VGA, HDMI and DVD. 12. Direction buttons (▲▼◄►) In the setup menu, press the ▲▼button to select the desired items, press the ◄► button to adjust or set. 13. OK button Press to confirm selection in setup menu. 14. AUTO ADJUST button In VGA mode, press to start auto-adjusting. 15. � � � � PLAY button In DVD mode, press to play the disc. 16. � � � �PAUSE button In DVD mode, press to pause the playback. Press it again to resume normal playback.

Remote Control 17. � � � �/� � � � button In DVD mode, press to search fast forward or backward. In teletext mode, press to select red/green option. In the setup menu, use the red button to swap program and the green button to insert program in TV mode (Please see P24 or details). 18. MENU button (in DVD mode) In DVD mode, press to enter or exit the disc menu. In TV, Composite, S-Video or SCART-Composite mode, press to display or close the teletext. 19. SETUP button In DVD mode, press to enter or exit the DVD setup menu. In teletext mode, press to display or close the teletext/display mixed. 20. TITLE button In DVD mode, during a DVD disc playback, press to enter or exit the title menu if the disc contains. In teletext mode, press to display the index page. 21. AUDIO button In DVD mode, press to select the audio language or audio track. In teletext mode, press once to display the concealed information, such as solution of riddles or puzzles; press again to remove the riddles answers from the display. 22. SET CALL button In TV mode, press to select your favorite channels. 23. SET FAV button In TV mode, press to set the current channel as your favourite channel. 24. INFO. button Press to display the reference information. 25. SAVE button Press to close the screen display but not the sound. It can economize power. Press again to resume. 26. -/-- /+10 button In TV mode, press this button select one digit channel number, two digit channel number or three digit channel number. Then press the number buttons to select the desired channel. In DVD mode, press to select number greater than 10. 27. SOUND button Press repeatedly to select the sound mode: choose from User, Normal, News, Cinema and Concert. 28. CH � � � �/� � � � button In TV mode, press to select channels. 29. STEREO button Press to select sound track in TV mode (please see P28 for details). 30. MENU button Press to enter the setup menu. 31. EXIT button Press to exit the menu in the setup menu. 32. EJECT button In DVD mode, press to eject the disc. 33. ■ STOP button In DVD mode, press once to stop playback, and then press the �PLAY button to resume normal playback. Press this button twice repeatedly to stop completely.

Remote Control Remote Control Drawing 34. � � � �/� � � � button In DVD mode, press to skip to the previous or next chapter/track. For some discs, press the � button once to skip to the beginning of the current chapter/track; press twice repeatedly to skip to the previous chapter/track. In teletext mode, press to select the yellow/blue option. In the setup menu, use the yellow button to copy program and the blue button to delete program in TV mode (Please see P24 for details). 35. SUBTITLE button In DVD mode, press to select different subtitle languages during a multiple language DVD disc playback. In teletext mode, press to hold the current page and press again to resume. 36. REPEAT button In DVD mode, press to repeat a chapter, track, title, or all content. In teletext mode, press the button first time to double the size of the teletext letters in the upper half of the screen, second time to double size of the teletext letters in the lower half of the screen and third time to resume to the normal status. 37. CARD button In DVD mode, press to enter SD or MS/MMC card mode. It is priority for the U disk input. In TV, Composite, S-Video or SCART-Composite mode, press to show/hide the teletext list. 38. ANGLE button In DVD mode, press to access various camera angles (if the DVD disc contains multiple camera angles). In teletext mode, press to display the subpage of the teletext.

System Connections • Do not connect the power cord until all other connections have been made. • Ensure that you observe the colour cord when connecting audio and video cables. • Before connecting, open the cover on the right side of the unit’s rear panel. Connecting to Power Supply Plug the power supply cord to the wall AC outlet. Connecting to an External AV Signal Source (Composite/S-Video) Use audio cables to connect an external signal source to the audio input jacks on the jack panel of the unit. Use either composite video or S-Video cables for the video connection to the input jack on the jack panel of the unit. After connection, turn on the power of the unit and the external AV signal source. Press the INPUT button on the remote control or the SOURCE button on the TV set to select the Composite or S-video mode. Note: S-Video signals typically provide better image quality than composite video signals.

System Connections Connecting to an External AV Signal Source(YPbPr) Use the audio and video cables to connect the Y/Pb(Cb)/Pr(Cr) input Jacks on the right side of the unit’s rear panel to the external AV signal source. After connection, turn on the power of the unit and the external AV signal source. Press the INPUT button on the remote control or the SOURCE button on the TV set to select YPbPr mode. Connecting an HDMI Signal Source Follow the figure below to connect an HDMI signal source to the HDMI jack on the rear panel of the unit. After connection, turn on the power of the television and the external HDMI device and use the Input button on the remote control or the SOURCE button on the TV set to select HDMI mode. Note: HDMI provides both audio and video signals and typically provides superior image quality to component, S-Video or composite.

System Connections Connecting to a PC The unit can be connected to a PC (personal computer) via the VGA cable. Follow the steps and the figure below to connect. 1. Connect one end of the VGA cable to the VGA input jack on the right side of the unit’s rear panel and the other end to the PC. 2. Connect one end of the audio cables to the PC audio input jack on the right side of the unit’s rear panel and the other end to the PC audio output jack. 3. Set the PC’s resolution at 1440×900@60Hz for best results. After connection, turn on the unit and the PC. Press the INPUT button on the remote control or the SOURCE button on the TV set to select VGA mode.

System Connections Connecting to a SCART signal source Follow the figure below to connect a SCART signal source to the SCART jack on the rear panel of the unit. After connection, turn on the power to the television and the external AV signal source. Use the INPUT button on the remote control or the SOURCE button on the TV set to select SCART mode. Note: When there is a SCART signal provided, the TV will enter SCART mode automatically; when the SCART cable is pulled out or the external AV signal source is turned off, the TV will return to the previous mode. Connecting to TV Signal This unit can be connected to the TV signal input source via the 75Ω antenna jack on the rear panel. After connection, turn on the power of the unit. Then press the INPUT button on the remote control or the SOURCE button on the TV set to select TV mode and conduct program selection.

Source Selecting The TV set incorporates multiple video modes, you can select the video mode according to the input signal. Press the INPUT button on the remote control or the SOURCE button on the right side panel of the TV repeatedly, and you can select the video mode in the following order: TV => SCART => Composite => S-Video => YPbPr => VGA => HDMI => DVD If you remove the removable DVD module and press the INPUT button on the remote control or the SOURCE button on the right side panel of the TV repeatedly, then you can select the video mode in the following order: TV => SCART => Composite => S-Video => YPbPr => VGA => HDMI NOTE: � If there is no signal provided in VGA mode, the unit will enter the standby mode 1 minute later and it will enter work state once there is a VGA signal provided. � In other modes, if there is no signal provided the unit will enter power-off mode 15 minutes later. You can restart the TV by pressing the POWER button.

TV Function NOTE: In other mode, you can refer to the following instructions in TV mode to go on with some settings. Preparation 1. After connection, press the POWER button to turn on the unit. 2. Press the INPUT button on the remote control or the SOURCE button on the TV set repeatedly to select TV mode. Then you can go on with the following setup: Video Setting Note: the items in the Video Setting menu can be set when there is signal provided. Contrast Press the ▲▼ button to select Contrast and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu. Brightness Press the ▲▼ button to select Brightness and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu. Saturation Press the ▲▼ button to select Saturation and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu. Hue Press the ▲▼ button to select Hue and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu. NOTE: This item is only available under NTSC TV signal mode. Press the MENU button once to enter the main setup menu. Press the ◄► button to select Video, and the screen will display as shown on the right: Press the OK or ▼ button to enter the Video setting menu. Press the ▲▼ button to select an item. Press the EXIT button to exit the menu.

TV Function Sharpness Press the ▲▼ button to select Sharpness and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu. Color Temperature Press the ▲▼ button to select Color Temperature and press the ◄► button to select Middle, Cool or Warm. Press the MENU button to return to the previous menu. DNR (Digital Noise Reduction) Press the ▲▼ button to select DNR and press the ◄► button to select Low, Middle, Strong or Off. Press the MENU button to return to the previous menu. Black Level Extender Press the ▲▼ button to select Black Level Extender and press the ◄► button to select On or Off. Press the MENU button to return to the previous menu. CTI (Color Transient Intensity) Press the ▲▼ button to select CTI and press the ◄► button to select On or Off.. Press the MENU button to return to the previous menu. Flesh Tone Press the ▲▼ button to select Flesh Tone and press the ◄► button to select On or Off. Press the MENU button to return to the previous menu. Adaptive Luma Control Press the ▲▼ button to select Adaptive Luma Control and press the ◄► button to select On or Off. Press the MENU button to return to the previous menu. Advanced Picture Adjust Press the ▲▼ button to select Advanced Picture Adjust. Press the OK or ► button to enter the setup, as show on the right: In the menu, press the ▲▼ button to select an item. Press the ◄► button to set. Press the EXIT button to exit the menu.

TV Function Audio Setting Note: the items in the Audio Setting menu can be set when there is signal provided. Bass Press the ▲▼ button to select Bass and press the ◄► button to adjust the level. Press the MENU button to return to the previous menu. Treble Press the ▲▼ button to select Treble and press the ◄► button to adjust the level. Press the MENU button to return to the previous menu. Balance Press the ▲▼ button to select Balance and press the ◄► button to adjust the level. Press the MENU button to return to the previous menu. Surround Press the ▲▼ button to select Surround and press the ◄► button to select On or Off.. Press the MENU button to return to the previous menu. Reverb Press the ▲▼ button to select Reverb and press the ◄► button to select Low, Middle, Strong or Off. Press the MENU button to return to the previous menu. Press the MENU button once to enter the main setup menu. Press the ◄ ► button to select Audio and the screen will display as the figure on the right. In the menu, press the OK or ▼ button to enter the menu. Press the ▲▼ button to select an item. Press the EXIT button to exit the menu.

TV Function Misc Setting Language Press the ▲▼ button to select Language. Press the ◄ ► button to select the desired language. Press the MENU button to return to the previous menu. Blue Mute Press the ▲▼ button to select Blue Mute. Press the ◄ ► button to select On or Off. Press the MENU button to return to the previous menu. Parental Press the ▲▼ button to select Parental. Press the OK or ► button to enter the menu and the screen will display the following: Use the number buttons to enter the password. Press the direction buttons (▲▼◄►) to highlight OK and press the OK button to enter the menu as shown below; highlight Cancel and press the OK button to cancel the operation. The default pin is 0000. Press the MENU button once to enter the main setup menu. Press the ◄► button to select Misc, and the screen will display as the figure on the right. In the menu, press the OK or ▼ button to enter the menu. Press the ▲▼ button to select item. Press the EXIT button to exit the menu. In the menu, press the ▲▼ button to select items. Press the MENU button to return to the previous menu. Press the EXIT button to exit the menu.

TV Function Channel Lock Press the ▲▼ button to select Channel Lock. Press the ◄ ► button to select the channel you want to lock. Press the OK button to lock the selected channel and again to unlock the channel. Press the MENU button to return to the previous menu. NOTE: � The current channel cannot be locked. � If you locked one or more channels, the TV setting page (P23) cannot be used when you enter the system setup menu again. � Please unlock the locked channel and exit the menu completely, then press the MENU button to enter the setup menu again to set the TV Setting page. Video Lock Press the ▲▼ button to select Video Lock. Press the ◄ ► button to select video source and press the OK button to lock the selected video source or cancel. Press the MENU button to return to the previous menu. NOTE: The current source cannot be locked. Clear All Press the ▲▼ button to select Clear All. Press the ◄ ► button to clear all lock settings. Note: the password will return to it’s standard value (0000). Default Press the ▲▼ button to select Default in the Misc Setting menu. Press the ◄ ► button, all the settings will return to their original default status. Note: the password you set can not be returned to it’s original status. Change Password Press the ▲▼ button to select Change Password and press the OK or ► button to enter, the screen is shown: Use the number buttons to enter the old password and press the OK button to confirm. The original pin is 0000. Use the number buttons and the direction buttons to enter a new one and again. Use the direction buttons to select OK and press the OK button to confirm; select Cancel and press the OK button to cancel.

TV Function TV Setting Region Selection Press the ▲▼ button to select Region Selection. Press the ◄ ► button to select the desired region. Searching Press the ▲▼ button to select Searching. Press the OK or ► button to start auto searching and the screen will display as shown on the right: When auto-searching is over, all searched programs will be stored automatically and it will return to the first searched channel. During searching, press the MENU button to stop searching and return to the previous menu. Manual Scan Press the ▲▼ button to select Manual Scan. Press the OK or ► button to enter the manual scan menu as shown on the right: Press the ▲▼ button to select PR Start or Start From. Press the ◄ ► button to set the start program number or the start frequency. Select Start Search and press the OK button to begin searching. When a program is searched, it will stop searching automatically. Press the MENU button to store and return. Press the MENU button once to enter the main setup menu. Press the ◄ ► button to select TV, and the screen will display as shown on the right: In the menu, press the OK or ▼ button to enter the menu. Press the ▲▼ button to select an item. Press the MENU button to return to the previous menu. Press the EXIT button to exit the menu.

TV Function Update Search When some program is deleted, you can use Update Search to search it again. Press the ▲▼ button to select Update Search. Press the OK or ► button to start update searching and the search progress will display on the screen as shown on the right: Press the MENU button to stop searching and store the searched program to the channel list. Program Edit Press the ▲▼ button to select Program Edit, press the ► button to enter the menu as shown: Use the four colour buttons on the remote control to swap, insert, copy or delete a program. Use the ▲▼buttons to select a program you want to swap, insert, copy or delete. Press a colour button you want and use the ▲▼ button to select the program you want to swap to, insert before or copy to. Press the OK button to confirm. In the menu, Press the ▲▼ button to select the program you want to edit and press the OK button to enter the edit menu. Press the ◄ ► button to go to the previous/next page of the program list. Press the EXIT button to exit the menu. Program Edit Menu In the menu, Press the ▲▼ button to select an item. Press the MENU button to return to the previous menu. Press the EXIT button to exit the menu.

TV Function PR Name In the program Edit Menu, press the ▲▼ button to select PR Name and press the OK button to enter the channel name edit menu. See the figure on the right: In the menu, press the ▲▼◄ ► buttons to select characters or numbers and press the OK button to confirm. You can enter 6 characters at most. After entering characters, select “Cancel” and press the OK button to cancel; select “OK” and press the OK button to confirm. Press the EXIT button to return to the previous menu. Sound System In the program Edit Menu, press the ▲▼ button to select Sound System. Press the ◄► button to select the desired item. Frequency In the program Edit Menu, press the ▲▼ button to select Frequency. Press the ◄► button to select frequency forward or backward and press the OK button to confirm. Fine Tuning When the picture quality and the accompanied sound are not good, you use the fine tuning to improve this. In the program Edit Menu, press the ▲▼ button to select Fine Tuning. Press the OK button to fine tune and again to return. Skip In the program Edit Menu, press the ▲▼ button to select Skip. Press the ◄► button to select On or Off. Decoder In the program Edit Menu, press the ▲▼ button to select Decoder. Press the ◄► button to select On or Off. Store In the program Edit Menu, press the ▲▼ button to select Store. Press the OK button to store the settings and return to the previous menu.

TV Function Geometric Setting (VGA mode) Note: the items in the Geometric Setting menu can be set when there is a VGA signal provided. Contrast Press the ▲▼ button to select Contrast and press the ◄► button to adjust the value. Brightness Press the ▲▼ button to select Brightness and press the ◄► button to adjust the value. Auto Setting Press the ▲▼ button to select Auto Setting and press the ◄► button to activate auto setting. Phase Press the ▲▼ button to select Phase and press the ◄► button to adjust the value. Manual Clock Press the ▲▼ button to select Manual Clock and press the ◄► button to adjust the value. Press the MENU button once to enter the main setup menu. Press the ◄ ► button to select Geometric, and the screen will display as the figure on the right. In the menu, press the OK or ▼ button to enter the menu. Press the ▲▼ button to select an item. Press the MENU button to return to the previous menu. Press the EXIT button to exit the menu. Display Adjustment Press the ▲▼ button to select Display Adjustment. Press the ◄ ► button to enter the menu as shown on the right: In the menu, press the ▲▼ button to select items. Press the MENU button to return to the previous menu. Press the EXIT button to exit.

TV Function H Position Press the ▲▼ button to select H Position and press the ◄► button to adjust the value. V Position Press the ▲▼ button to select V Position and press the ◄► button to adjust the value. Color Temp. R Press the ▲▼ button to select Color Temp. R and press the ◄► button to adjust the value. Color Temp. G Press the ▲▼ button to select Color Temp. G and press the ◄► button to adjust the value. Color Temp. B Press the ▲▼ button to select Color Temp. B and press the ◄► button to adjust the value. Load From Press the ▲▼ button to select Load From and press the ◄► button to select Middle, Warm, Cool or User. Note: Color Temp. R, Color Temp. G and Color Temp.B are only available when Load From is set to User. Color Temperature Press the ▲▼ button to select Color Temperature. Press the ◄ ► button to enter the menu as shown on the right: In the menu, press the ▲▼ button to select items. Press the MENU button to return to the previous menu. Press the EXIT button to exit.

NICAM Function The unit supports NICAM function when in TV mode. Under NICAM TV broadcast: 1. When receiving stereo audio signals, press the STEREO button on the remote control repeatedly to select the sound tracks between Nicam Stereo and Mono and the screen will show the corresponding display as shown below: 2. When receiving bilingual audio signals, press the STEREO button on the remote control repeatedly to shift the sound tracks between Nicam I, Nicam II and Mono and the screen will show the corresponding display as shown below: 3. When receiving mono audio signals, press the STEREO button on the remote control repeatedly to shift the sound tracks between Nicam Mono and Mono and the screen will show the corresponding display as shown below: Under A2 TV broadcast: 1. When receiving stereo audio signals, press the STEREO button on the remote control repeatedly to shift the sound tracks between Stereo and Mono and the screen will show the corresponding display as shown below: 2. When receiving bilingual audio signals, press the STEREO button on the remote control repeatedly to shift the sound tracks between I and II and the screen will show the corresponding display as shown below: 3. When receiving mono audio signals, press the STEREO button on the remote control to display sound track Mono on the screen.

TELETEXT Function Teletext is an optional function, therefore only the sets with the teletext system can receive the teletext broadcast. Teletext is a free service broadcast by most TV stations which provides up-to-the-minute information on news, weather, television programs, stock prices and many other topics. The teletext decoder of this TV can support the SIMPLE and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. FASTEXT is a more modern method allowing quick and easy selection of teletext information. Because the teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button on the remote control. 1. Red/Green button Press to select the red / green option. 2. button Press this button to enter or exit teletext. 3. button Press this button to enter or exit the teletext/display mixed mode. 4. button Press this button to display the index page. 5. button Press this button once to display the concealed information, such as solution of riddles or puzzles; press again to remove the riddles answers from the display. 6. Yellow/Blue button Press to select the yellow / blue option. 7. button Press this button to hold the current page and press again to resume. 8. button Press this button the first time to double the size of teletext letters in the upper half of the screen, a second time to double the size of teletext letters in the lower half of the screen and a third time to resume normal status. 9. button Press this button to show or hide the teletext list. 10. button Press this button to display the subpage of teletext.

DVD Playback Operation Preparation 1. Connect the unit to the power supply and press the POWER button to turn on the unit. 2. Press the INPUT button on the remote control or the SOURCE button on the TV set to select DVD mode and press the OK button to enter. 3. Gently insert the disc, with the label side toward the front of the television, into the disc tray slot until about half of the disc is in the tray. 4. The disc will draw into the unit and load automatically. 5. Press the EJECT button to eject the disc and push the disc into the disc tray until about half of the disc is in the tray, and then the disc can be drew into the disc tray again automatically. Warning: Use of poor quality discs could result in damage to the television. DVD Playback Region Code DVD players and discs are coded by region. These regional codes must match the played discs. If the codes don’t match, the disc cannot be played. This player’s default code is region 2. Play Press the PLAY button to start playback. Stop During playback, press the ■ STOP button once to stop playback and press the ► PLAY button to resume normal playback. Press the ■ STOP button twice to stop playback completely. Pause During playback, press the PAUSE button once to pause the playback; press it repeatedly to start step-by-step playback. Press the ► PLAY button to resume normal playback.

DVD Playback Operation Previous � � � � and Next � � � � Press the � � � � button to go to the next chapter. Press the � � � � button once to return to the beginning of the current chapter or track; press it twice to go to the previous chapter or track. Fast Playback During playback, press the � � � � � � � � button to activate fast forward or backward playback. During fast playback, press the ►PLAY button to resume normal playback. Repeat Use the REPEAT button repeatedly to repeat a chapter, title or all. • Some discs do not support the repeat function. Menu Normally there is a selecting menu for DVD discs. You can press the MENU button (under DVD mode) to enter the disc menu, and use the direction buttons to highlight an item. Then press the OK button to confirm. Title & Chapter Normally there are several titles in a DVD disc, and several chapters (sections) in a title. You can select any title or chapter quickly by entering the relevant number. • Some discs do not support the function by using the number buttons but the▲▼◄► direction buttons. Language (Audio) There can be up to 8 audio languages on a DVD disc. When you play a multi-language DVD disc you can press the AUDIO button on the remote control to select a language. Subtitle The DVD player can support multiple kinds of subtitles. When you play a multi-subtitle disc you can press the SUBTITLE button on the remote control to select different subtitles. • Some discs do not support the shifting subtitle function. CD Playback The player will play all tracks on a CD disc by default. You can use the � � buttons, or number buttons to select a track.

DVD Playback Operation Stop Press the ■ STOP button once to stop playback and press the ► PLAY button to resume normal playback. Press the ■ STOP button twice to stop playback completely. Pause Press the PAUSE button to pause playback, then press the PAUSE button again or ► PLAY button to resume normal playback. Previous and Next Press the � � � � button to go the beginning of the current track. Press twice repeatedly to go the previous track. Press the � � � � button to play from the beginning of the next track. Fast Playback Press the � � � � � � � � button on the remote control to activate fast backward or forward playback. Repeat Press the REPEAT button repeatedly to repeat a single track, all tracks, or to exit repeat mode. • Some discs do not support the repeat function. Audio During playback, press the AUDIO button to toggle audio output between Mono Left, Mono Right, Mix-Mono or Stereo. JPEG Playback JPEG is a common picture format that requires small amounts of storage per image and has low loss in resolution. Hundreds of pictures can be stored on a disc in this format. In order to view JPEG photo albums, you can ask your film development company to make a ”PICTURE CD” when they develop your film. Normal Playback Load a JPEG disc in. For JPEG disc, there will be a root menu displayed on the screen. Use the OK button and the direction button to select a submenu, and then use the ▲▼◄► direction button to select the contents. Many discs have other contents besides pictures. For a Picture CD disc, it will display the pictures automatically. • Many discs have other contents besides pictures.

DVD Playback Operation Stop Press the ■ STOP button to preview the pictures behind the currently played picture in the way of small pictures. Press the ► PLAY button to resume normal playback. Pause Press the PAUSE button to pause playback, press the PAUSE button again or ►PLAY button to resume playback. Repeat During playback, press the REPEAT button repeatedly, and the repeat modes are Shuffle, Random, Single, Repeat One, Repeat All and Repeat Off. Previous and Next During playback, press the � � � � � � � � button to select a picture. Menu Press the MENU button once to stop playback and return to the root menu. Picture Rotation During playback, press the ◄► button to rotate the currently displayed picture. This function will only activate for the current picture; once another picture is displayed, rotation will be cancelled automatically. • Note: Some JPEG discs may not support the rotation function. MP3 Playback Load a MP3 disc in the disc tray and the screen displays the root folder with several subdirectories/subfolders. Use the ▲▼ buttons to select desired folder. Then press the � PLAY or OK button to confirm your selection. Use the ▲▼ button to select desired file. Then press the � � � � PLAY or OK button to confirm your selection. Press the �button to return to last folder or directory. Pause During playback, press the � � � �PAUSE button to pause playback and press it again or the � � � �PLAY button to resume playback. Stop Press the � � � � STOP button once to stop playback and press the � � � � PLAY button to resume normal playback.

DVD Playback Operation Previous and Next In menu mode, press the � � � � or � � � � button to go to the previous or next file. Fast Playback Press the � � � � or � � � � button on the remote control to activate fast backward or forward playback. Repeat During playback, press the REPEAT button repeatedly, and the repeat modes are Folder, Shuffle, Random, Single, Repeat One, Repeat Folder and Off. MPEG 4 Playback Play After loading a MPEG4 disc, a root menu appears on the screen. Use the �� button to select desired item and press the OK button to play. Stop During playback, press the ■ STOP button to stop playback and return to root menu and press the � PLAY button to play the file from the beginning. Pause During playback, press the � � � �PAUSE button once to pause the playback and press the� � � �PLAY button to resume normal playback. Previous and Next During playback, press the � � � � button to go the previous file; press the � � � � button to play the next file Fast Playback During playback, press the � � � � button to activate fast forward playback; press the � � � � button to activate fast backward playback. During fast playback, press the � � � �PLAY button to resume normal playback. Repeat During playback, press the REPEAT button repeatedly to select repeat mode.

USB and SD/MS/MMC Card Function Preparation In DVD mode, connect USB device to the a USB port or insert SD/MS/MMC card into the SD/MS/MMC card slot on the right side of the unit. � Make sure that files are stored in the USB and SD/MS/MMC card before connection. 1. Press the CARD button to shift between Disc playback, USB playback and SD/MS/MMC playback. The default state is disc playback. Please see the figure below: 2. Press the ▲▼ buttons to select the folder. Press the OK button to enter. 3. Press the ▲▼ buttons to select the desired track. Then press the PLAY ► button to start playback. 4. Press the � � � �STOP button to stop playback. Press the ◄ button to return to the folder menu. Note: � The screen display will vary from disc to disc. � Pull out the USB or SD/MS/MMC card directly after the files are played. The unit will now return to disc playback mode. 00:00 00:00 001/002 BAK JPEG

DVD System Setup Preparation 1. In DVD mode, press the SETUP button to enter the DVD setup menu. 2. Press the ◄► button to select setup menu. 3. Press the SETUP button again to exit DVD setup menu. General Setup Page Press the SETUP button to enter the General Setup Page. The screen will display as below: TV Display Angle Mark On the menu, use the ▲▼ direction buttons to select the desired item. Press the OK button to enter the item. Press the ◄ button to return. 1. Press the ▲▼ direction buttons to select TV Display. 2. Press the OK button to enter the setup. 3. Use the ▲▼ direction buttons to select items. 4. Press the OK button again to confirm the selection and return. 1. Press the ▲▼ direction buttons to select Angle Mark. 2. Press the OK button to enter the setup. 3. Use the ▲▼ direction buttons to select On or Off. 4. Press the OK button again to confirm the selection and return.

DVD System Setup OSD Lang Captions Screen Saver Last Memory The item is used to select the OSD language. 1. Press the ▲▼ direction buttons to select OSD Lang. 2. Press the OK button to enter the setup. 3. Use the ▲▼ direction buttons to select items. 4. Press the OK button again to confirm the selection and return. 1. Press the ▲▼ direction buttons to select Screen Saver. 2. Press the OK button to enter the setup. 3. Use the ▲▼ direction buttons to select On or Off. 4. Press the OK button again to confirm the selection and to return. 1. Press the ▲▼ direction buttons to select Last Memory. 2. Press the OK button to enter the setup. 3. Use the ▲▼ direction buttons to select On or Off. 4. Press the OK button again to confirm the selection and return. 1. Press the ▲▼ direction buttons to select Captions. 2. Press the OK button to enter the setup. 3. Use the ▲▼ direction buttons to select items. 4. Press the OK button again to confirm the selection and return.

DVD System Setup Media Center Audio Setup Page Press the SETUP button to enter the General setup menu, then use the ◄► direction buttons to select Audio Setup Page, the screen will display as shown below: Dolby Digital Setup Dual Mono On the menu, Use the ▲▼ direction buttons to select the desired item. Press the OK button to enter the item. Press the ◄ button to return. 1. Press the ▲▼ direction buttons to select Dolby Digital. 2. Press the OK button to enter the setup. 3. Use the ▲▼ direction buttons to select items. 4. Press the OK button to enter the setup. Press the ◄ button to return. 1. Press the ▲▼ direction buttons to select Dual Mono. 2. Press the OK button to enter the setup. 3. Use the ▲▼ direction buttons to select items. 4. Press the OK button again to confirm the selection and return. 1. Press the �� button to select Media Center. 2. Press the OK button to enter. 3. Use the �� button to select DVD, USB, SD/MMC or MS. 4. Press the ENTER button again to confirm the selection and return to the previous menu.

DVD System Setup Dynamic HDCD Setup In the Audio Setup Page, use the ▲▼ direction buttons to select HDCD Setup. Press the OK button to enter the menu as shown below: Video Setup Press the SETUP button to enter the General setup menu, then use the ◄► direction buttons to select Video Setup Page, the screen will display as shown below: 1. Press the ▲▼ direction buttons to select Dynamic. 2. Press the OK button to enter. 3. Use the ▲▼ direction buttons to adjust. 4. Press the OK button again to confirm the setting and return. 5. Press the ◄ button to return. 1. On the menu, press the OK button to enter the setup. 2. Use the ▲▼ direction buttons to select items. 3. Press the OK button again to confirm the selection and return. 4. Press the ◄ button to return. On the menu, Use the ▲▼ direction buttons to select the desired item. Press the OK button to enter the item. Press the ◄ button to return.

DVD System Setup Video Quality Setup Select Quality, press the OK button to enter the menu as below: Sharpness Brightness Contrast 1. Press the ▲▼ direction buttons to select Sharpness. 2. Press the OK button to enter the setup. 3. Use the ▲▼ direction buttons to select High, Medium or Low. 4. Press the OK button again to confirm the selection and return. 1. Press the ▲▼ direction buttons to select Brightness. 2. Press the OK button to enter the setup 3. Use the ◄► direction buttons to adjust the level. 4. Press the OK button again to confirm the setting and return. 1. Press the ▲▼ direction buttons to select Contrast. 2. Press the OK button to enter the setup. 3. Use the ◄► direction buttons to adjust the level. 4. Press the OK button again to confirm the setting and return.

DVD System Setup Preference Setup Press the SETUP button to enter the General setup menu, then use the ◄► direction buttons to select Preference Page, the screen will display as the below: Audio Subtitle On the menu, Use the ▲▼ direction buttons to select the desired item. Press the OK button to enter the item. Press the ◄ button to return. 1. Press the ▲▼ direction buttons to select Audio. 2. Press the OK button to enter the setup. 3. Press the ▲▼ direction buttons to select audio language. 4. Press the OK button again to confirm the setting and return. 1. Press the ▲▼ direction buttons to select Subtitle. 2. Press the OK button to enter the setup. 3. Press the ▲▼ direction buttons to select Subtitle language. 4. Press the OK button again to confirm the setting and return.

DVD System Setup Disc Menu Parental Default 1. Press the ▲▼ direction buttons to select Disc Menu. 2. Press the OK button to enter the setup 3. Press the ▲▼ direction buttons to select Menu language. 4. Press the OK button again to confirm the setting and return. 1. Press the ▲▼ direction buttons to select Default. 2. Press the OK button to select Reset. 3. Press the OK button, all the settings will return to the default status. DVD discs equipped with the child lock function are rated according to their contents and settings vary from disc to disc. Depending on the disc, you can lock out playback of the disc altogether. 1. Press the ▲▼ direction buttons to select Parental. 2. Press the OK button to enter the setup, see the left figure: 3. Press the ▲▼ direction buttons to select an item. 4. Press the OK button again to confirm setting, and you should enter the password. The Default Password is 3308. 5. Press the OK button again to confirm the setting and return.

DVD System Setup Password Setup Press the SETUP button to enter the setup menu, then use the ◄►direction buttons to select Password Setup Page, the screen will display as shown below: Password Mode Password On the menu, Use the ▲▼ direction buttons to select the desired item. Press the OK button to enter the item. Press the ◄ button to return. 1. Press the ▲▼ direction buttons to select Password Mode. 2. Press the OK button to enter the setup, see the left figure: 3. Press the ▲▼ direction buttons to select On or Off. 4. Press the OK button again to confirm the setting and return. You can change the password by yourself. 1. Press the ▲▼ direction buttons to select Password. 2. Press the OK button to enter the setup, see the figure on the left: 3. Press the OK button again to change the password. 4. According to the indication in the menu, Use the number buttons to enter the old password, then enter the new password, then enter it again to confirm. Press the OK button again to confirm the setting and return. The password has been changed successfully. 5. The Default Password is 3308.

Troubleshooting Take steps described in the tables below to solve simple problems before contacting customer service. If you suspect something wrong with this unit, immediately turn the power off and disconnect the power connector from the unit. Never try to repair the unit yourself because it is dangerous to do so. SYMPTOM CHECK ITEM There is no display on the screen. Make sure the unit is turned on and all connections are correct. There is no sound. Make sure the unit is turned on and all connections are correct. Make sure the volume is not turned down or muted. Make sure the sound setup is correct. In DVD mode, make sure disc is not dirty or warped. There is no picture or picture moves up and down. Make sure all connections are correct. Make sure the unit is in the correct video mode. The unit can’t play discs. Make sure the disc is loaded in correctly. Make sure the disc is not dirty or warped. Make sure the region code is the same as the region code of the DVD disc. Make sure water condensation has not occurred. If it occurs, take out the disc and leave the unit on for at least one hour. The unit does not continue to play discs or plays the same section repeatedly. Make sure the disc is not dirty or damaged. Make sure the unit is not in any repeat status. The remote control does not work. Make sure there are no obstructions between the remote control and the unit. Make sure the remote control is pointing at the unit. Make sure the battery is installed into the remote control correctly. Make sure the battery is not too weak. Other Notes: Static or other external interference may cause the unit to behave abnormally. If this occurs, unplug the power-supply cord from the outlet and plug it in again to reset the unit. If the problem persists, then please disconnect the power and consult a qualified technician.

Specifications TFT-LCD Resolution 1680 x 1050 TFT-LCD Screen Size 22 inches Power AC100～240V～50/60Hz Power Consumption < 65 W (standby 6.5W) Dimension 562 mm × 192 mm × 463 mm (LXWXD) Ambient Temperature 0~40˚C Weight About 11 Kg DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. © 1992 -1997 Dolby Laboratories, Inc. All rights reserved. If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with househould waste. Please recycle where facilities exit. Check with your Local Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive)