Lenoxx CD-965 Quick Instructions

open the BATTERY DOOR. 2. Insert 2 size “AA” fresh alkaline batteries as shown. NOTE: Player will not work, and batteries will be drained, if not inserted as shown inside the Battery Compartment. 3. Close the BATTERY DOOR. PLUGGING IN HEADPHONES Plug the headphones into the PHONES jack on the right side of the player, and put on the headphones. 2 size “AA” BATTERIES 1 NOTE: If the symbol “ ” shows in the display, your batteries are weak and need replacement. BASS BOOST Slide the BASS BOOST switch (on the left side of the set) to ON to give you more low frequency tones. VOLUME CONTROL Adjust the VOLUME control to your preference. Power this player inserting 2 size “AA” fresh alkaline batteries. AC ADAPTOR (optional) You can also power this player by connecting an optional AC adaptor. Before you buy an AC Adaptor, please note, the only AC ADAPTOR suitable for this player is DC 4.5V 700mA (or greater mA), with plus center polarity . Others may damage the player. Please check voltage & current (mA) before buying an AC ADAPTOR. POWERING UP TO PHONES STEREO HEADPHONES INCREASE DECREASE QI-CD965(CDM32J-60F8)-WM-E-010504.p65 2/23/2004, 12:07 PM 1

flash during pause.) Press PLAY/PAUSE again to continue play. STOP (or POWER OFF) Press the STOP button once to stop play and press it twice to shut off power. REPEAT During CD play, press the REPEAT button once to repeat one song over and over, “ REPT 1 ” will show in the display. That song will play and repeat again and again till you press STOP. To repeat all songs, just press the REPEAT button twice, the display will show “REPT ALL”. SKIP/SEARCH ( or ) During play, press and hold the SKIP/SEARCH buttons or while the disc is playing to search backward or forward through a particular track (or song). Press it several times to skip to a later or earlier song, or to get back to the beginning of the song. ESP The ESP PLUS TM function will turn on automatically when the PLAY/PAUSE button is pressed. PROGRAMMING To arrange the songs to play in a special sequence (1, 5, 2, 3, etc.) you can program the set to your taste. Press the PROGRAM button in STOP mode, use the SEARCH buttons ( or ) to select the track you want, then press the PROGRAM button again. Repeat pressing the SEARCH buttons ( or ) and PROGRAM button till you finish programming, then press PLAY. FOR OTHER FEATURES INCLUDING DETAILED PROGRAMMING INSTRUCTIONS, RANDOM AND INTRO PLAY INSTRUCTIONS, PLEASE REFER TO THE OPERATING INSTRUCTIONS MANUAL. 2 PLAYING A DISC 1. Slide the OPEN button to open the CD DOOR. 2. Place a disc (CD or MP3 disc) on the center post with the label facing up, and then gently push down on the center of the disc until it clicks in. 3. Close the CD DOOR, press the PLAY button, the disc will start to play. During MP3 play, press the REPEAT button once to repeat one song over and over, “ REPT 1 ” will show in the display. That song will play and repeat again and again till you press STOP. To repeat the songs on the directory, press the REPEAT button twice, the display will show “REPT DIR”. To repeat all songs, just press the REPEAT button 3 times, the display will show “REPT ALL”. Press the STOP button to quit repeat play. DISC ROTATION During MP3 play, it is normal for the disc to occasionally stop turning, this is normal, and saves battery power. QI-CD965(CDM32J-60F8)-WM-E-010504.p65 2/23/2004, 12:07 PM 2