Leviton ODCOP Installation Instructions
Text of the manual
1 WATT, 24VDC
Cat. No. ODCØP
INSTALLATION INSTRUCTIONS
DESCRIPTION
The Cat. No. ODCØP Photocell responds to ambient light levels in the viewing area and
provides an output that is representative of the ambient light intensity. The output is an
analog voltage proportionate to the ambient light level.
The ambient light measured is the light from an
Make all connections as described in Steps 4 through 9. Carefully feed the wires into the hole and press the Photocell body into the outer
shell until the rim is flush with the shell.
NOTE: If wiring is to be run exposed along the ceiling, carefully trim the plastic from the indentation in the side of the outer shell and lay
the Photocell wires through it be
