Lexmark X746 Supplies Manual

Ordering a toner cartridge When a message appears on the printer display indicating which toner cartridge needs to be replaced, immediately order a new toner cartridge. For information on replacing a toner cartridge, see the instruction sheet that came with the supply. Estimated cartridge yield is based on the ISO / IEC 19798 standard (with about 5% coverage per color). Extremely low print coverage (less than 1.25% for a color) for extended periods of time may negatively affect actual yield for that color and may cause cartridge parts to fail prior to exhaustion of toner. Recommended toner cartridges and part numbers Part name Lexmark Return Program Cartridge Regular cartridge Black High Yield Toner Cartridge X746H1KG X746H2KG Yellow Toner Cartridge Yellow High Yield Toner Cartridge X746A1YG X748H1YG X746A2YG X748H2YG Magenta Toner Cartridge Magenta High Yield Toner Cartridge X746A1MG X748H1MG X746A2MG X748H2MG Cyan Toner Cartridge Cyan High Yield Toner Cartridge X746A1CG X748H1CG X746A2CG X748H2CG Ordering a fuser or a transfer module A message on the printer display appears when the fuser or transfer module needs to be replaced. For information on replacing the fuser or transfer module, see the instruction sheet that came with the supply. Recommended part numbers Part name Part number Fuser 40X8112 (100 V) 40X8110 (115 V) 40X8111 (230 V) Transfer module 40X8307 Ordering a waste toner bottle A message on the printer display appears when the waste toner bottle needs to be replaced. For information on replacing the waste toner bottle, see the instruction sheet that came with the supply. Note: Waste toner bottle reuse is not recommended. Supplies guide Page 1 of 2

Part name Part number Waste toner bottle C734X77G Ordering ADF replacement parts Order ADF replacement parts if you experience problems with paper double-feeding or failing to feed through the ADF. For information on replacing the ADF parts, see the instruction sheets that came with the parts. Recommended part numbers Part name Part number ADF pick assembly 40X5188 Separator pad 40X5187 ADF pick pad 40X5189 Ordering a photoconductor A message will appear on the printer display when a photoconductor needs to be replaced. For information on replacing a photoconductor, see the instruction sheet that came with the supply. Recommended part numbers Part name Part number Photoconductor C734X20G Photoconductor, Multi‑Pack C734X24G Notes: • All four photoconductors should be replaced at the same time. • Reset the maintenance counter back to zero after installing the four new photoconductors. Supplies guide Page 2 of 2