Nikon CoolPix S100 Reference Manual

using HS movie can be played back in slow motion at 1/8, 1/4, or 1/2 of normal playback speed, or played back in fast motion at a speed two times faster than normal speed. While recording movies, the camera can be switched from normal speed movie recording to slow motion or fast motion movie recording. • See "HSMovie" (_'_ 4d) for more information. 1 Set the shooting mode to movie and tap the MENUtab. • See"RecordingMovies"(_ 82)for information about setting the shooting mode to movie. g o _I Tap NJ_and tap an HS movie option. • See,,w]_Movie Options" (_ 75)for more information. :3 Tap _s to choose whether the camera records normal speed movies or HS movies (slow motion or fast motion movies) when movie recording starts. • ONon (defaultsetting): HSmoviesare recordedwhen recordingbegins. • OFF off: Normal speedmoviesarerecordedwhen recording begins.Tapthe HSmovie switch icon (_ 45)to switch to HSmovie recording at the point wherethe camera should recordfor slowmotion orfast motion playback. • Tap[] afterchanging the settingsand return to the shooting screen. _44

begins after the monitor briefly turns off. • The camera focuses at the center of the frame. Focus areas are not displayed during recording. • Movie recording starts at HSwhen the Open with HS footage checkbox in the movie menu is checked. HS movie switch icon • Movie recording starts at normal speed when the Open with HS footage checkbox in the movie menu is not checked. Tap the HS movie switch icon to switch to HS movie recording at the point where the camera should record for slow motion or fast motion playback. • When an HS movie reaches the maximum length for HS movies (_ 75), or when the HS movie switch icon istapped, the camera switches to normal speed movie recording. The camera switches between normal speed movie recording and HS movie recording each time the HS movie switch icon is tapped. • When recording HS movies, the remaining recording time display changes and displays the remaining movie length for HS movie recording. 5 Press the shutter-release button to end recording. • Tapping the monitor can also start or end recording. R to t_ _45

with sound, • When recording HS movies, vibration reduction cannot be used. Zoom position, focus, exposure, and white balance are locked when the camera starts recording. [] HS Movie Recorded movies are played back at about 30 frames per second, including portions recorded using HS movie, When Movie options (_ 75) is set to _Z_ HS 240 fps (320x240), v_ HS 120 fps (640x480), or _"_Et_IHS 60 fps (1280x720), movies that can be played back in slow motion car/be recorded. When set to _ HS 15 fps (1920xl 080), movies that can be played back in fast motion at a speed two times faster than normal speed can be recorded. Portions recorded at _1_ HS 240 fps (320x240): High speed capturing is possible for up to ten seconds. Portions captured at high speed are played back in slow motion at a speed eight times slower than normal speed. Playback _ Slow motion playback (no sound) Portions recorded at 100_ HS 15 fps (1920xl 080): A movie of up to two minutes in length is recorded when shooting for the purpose of high speed playback, Playback is two times faster. Recording [ 2 min ] ..... Playback 1 min Fast motion playback (no sound) [] Returning from HS Movie Setting to Normal Speed Movie Setting Tap the MEItUtab and tap a normal speed movie option in tile Movie options screen (_ 75), _46

movie can be saved as a separate file (except movies recorded using ,/_'_ iFrame 540 (960x540) (_'6 75)). 1 Play back the desired movie and pause playback ([Z_ 86). 2 Tap I_. • The movie edit screen is displayed. 3 Tap [] (choose start point). • When editing begins, the frame where pByback was paused is the start point. • Tap [] or [] to move the start point to the beginning of the desired portion of the movie. • To cancel editing, tap I_ 4 Tap [] (choose end point). • Tap [] or [] to move the end point on the right edge to the end of the desired portion of the movie. • Tap I_1 (preview) to play backthe specified portion of the movie that will be saved. While the preview is playing, tap _[_ to adjust the volume. Tap [] or [] to advance or rewind the movie. While the preview is playing back, tap [] to stop playback. ,5 When the settings are finished, tap []. _47

movie is saved. • To exit without saving, tap Ne. m _,A*. o Notes on Movie Editing • A movie that was created by editing cannot be trimmed again. To trim another area of the movie, select and edit the original movie. • Movies are trimmed in one second intervals, therefore the actual trimmed portion of the movie may differ slightly from the selected start and end points. Movies cannot be trimmed so that they are less than 2 seconds long. • Editing functions are not available when there is not enough free space in the internal memory or on the memory card to save the edited copies. [] More Information See "File and Folder Names" (_ 98) for more information. _48

62) for information about _!" Image mode. _/_/_E_ Touch Shooting Select _ mode -), MENUtab -)' [_"_[1_ Touch (auto) shooting • The touch shooting function can be used in I_1 (auto) mode and other shooting modes (except with Subject tracking). • The Touch shutter and Touch AF/AE operations differ according to the current shooting mode (_ 51, _ 55). L_ Touch shutter Pictures can be taken by simply tapping the _ 50 monitor. Use this option to take pictures of moving subjects. _"_ Subject tracking Tap the subject on which the camera will focus. The _52 focus area will automatically move to track the subject. Tap the monitor to set the focus area. Pressthe _[i_Touch AF/AE shutter release button to take the picture with the _ 54 focus and exposure achieved with the focus area. R d) t_

the monitor as this may cause slight movement of the camera, resulting in blurred pictures. • When digital zoom is in effect, the camera focuses on the subject in the center of the frame. • The shutter-release button can also be used when the touch shutter option is selected. • If [ ] isdisplayed when the monitor is tapped, the shutter cannot be released. Tap an area within L_ or a border displayed when the camera detects a face. L_ Notes on Touch Shutter • When taking pictures with Continuous H, Continuous L or BSS in Continuous setting (_ 57) enabled, or in Sports or Museum scene mode (_ 40), use the shutter release button to take pictures, Only one picture can be taken at a time using the touch shutter function, • Prevent shooting with accidental tapping of the monitor by changing the touch shooting setting to Touch AF/AE (_ 54) (except in some scene modes). At this setting, the shutter is not released when the monitor is tapped. When recording movies, the touch shooting setting is used to enable or disable the touch shutter, • When shooting a subject that is not suitable for autofocus, the camera may not be able to focus properly on the subject (_ 29). • When a subject displayed in the monitor is tapped with the self timer (_ 56) enabled, the camera locks focus and releases the shutter after ten or two seconds, • There are functions with which this setting cannot be enabled. See "Features That Cannot Be Applied Simultaneously" ([.]_ 64) for more information. [] Touch Shooting Setting The touch shooting setting applied in I_1 (auto) mode is stored in the camera's memory even after the camera is turned off, _50

Mode) [] Shooting Modes That Support Touch Shutter The touch shutter can be used in I_1 (auto) mode and other shooting modes, Touch shutter operation differs according to the current shooting mode as follows. Shooting mode Touch shutter operation When a face is detected by the camera, it is framed by I_ (easy auto) mode ([._ 36), smart portrait mode (when Smile timer is set to Off; _ 50) Iffl (auto) mode (_ 37), Sports, Party/indoor, Beach, Snow, Close-up, Food, Museum, Black and white copy, Backlighting, 3D photography _, and Panorama (panorama assist) ×.scene modes ([._ 40) a border. Tap a detected face to set the focus and exposure on that face. When no face is detected, focus is set for the area tapped. Tap the intended subject. Focus and exposure are set for the area tapped, When the camera detects more than one face, tap a face framed by a single border to set focus and exposure for that face, Only a border displayed by the face detection function Portrait and Night portrait scene can be selected. When the camera detects more than modes (_ 40) one face, tap a face framed by a single border to set focus and exposure for that face, Landscape, Sunset, Dusk/dawn, Focus and exposure are set for the same focus area used Night landscape, Fireworks show, when pictures are taken by pressing the shutter release and Panorama (easy panorama) button, See "Selecting a Scene Mode to Take Pictures scene modes ([._ 40) (Features)" ([._._42) for more information. Smart portrait mode (when Smile Touch shutter cannot be enabled, timer is set to On; _ 50) Pet portrait scene mode (_ 40) When Pet portrait auto release is set to On: Touch shutter cannot be enabled. When set to Off: Only borders displayed by the pet face detection function can be selected. When the camera detects more than one pet's face, tap a face framed by a single border to move the focus area to that face. In 3D photography and Panorama (panorama assist) scene modes, the focus and exposure set for the first shot are used for the following shots. R rb t_

in the monitor. The subject is registered. When the camera detects any faces, tap a face framed by a border to register it as the subject and begin tracking. If the camera has detected more than one face, the borders around the faces that are not registered disappear. When a subject other than a face is registered, a yellow focus area is displayed on the subject and the camera begins tracking the subject. When the border framing the subject glows red, the camera is unable to focus. Change the composition and try again. • If the tapped area does not contain a subject that can be registered, [ ] will be displayed in the monitor. Tap a subject within [ ]. • Tap another subject to change a subject to follow. • To cancel the registration of the subject, tap displayed at left in the monitor. • If the camera cannot track the registered subject anymore, the focus area will disappear and the registration will be canceled. Register the subject again. _I Press the shutter-release button to take a picture. • The camera focuses on the focus area when the shutter release button is pressed halfway. The focus area will glow green and focus will be locked. • When the camera is unable to focus, the focus area will blink. Press the shutter release button halfway again to focus. • If the shutter-release button is pressed halfway while the focus area is not displayed, the camera focuses on the subject at the center of the frame. • Pressthe shutter release button all the way down to release the shutter. The Shooting Menu (for I_1 (Auto) Mode) Subject Tracking (Focusing on a Moving Subject) Select i_1 -)' MENUtab -)' [_"_[[_ Touch "_ (auto) shooting (subject tracking) is enabled only in I_1 (auto) mode. _52

Mode) Notes on Subject Tracking Mode • Digital zoom is not available. • The sound of the lens focus motor can be heard when the subject tracking function is working. • Adjust zoom and apply shooting settings ([._ 37) before selecting the subiect. If zoom or any other setting is adjusted after the subject has been registered, subject registration will be cancelled, • It may be impossible to register the desired subject, or the camera may be unable to track the registered subject or may begin tracking a different subject, if the subject is moving rapidly, if there is a significant amount of camera shake, or if the camera detects a similar subject. The camera's ability to accurately track the registered subject is also dependent upon the size and brightness of the subject. • In some rare cases, subjects not suitable for autofocus ([.7._]29) may be out of focus despite the fact that the focus area glows green. In this situation, focus on another subject which is at the same distance from the camera as the intended subject while the shutter release button is pressed halfway (_ 39). • There are functions with which this setting cannot be enabled. See "Features That Cannot Be Applied Simultaneously" ([.]_ 64) for more information. [] Touch Shooting Setting Su_ect registration with su_ect tracking will be canceled when the camera is turned off. S" R d) t_ _53

AEwAFE'I Tapping the Monitor to Focus (Touch AF/AE) Select i_1 (auto) -)' MENUtab -)' C_{_[_ Touch shooting A_[I ")'AE_ cannot be selected. • To cancel the focus area selection, tap displayed at the left side of the monitor. • Ifa position at which focus cannot be acquired istapped, [ ] will be displayed in the monitor. Tap another position inside [ ]. _I Press the shutter-release button to take a picture. • Pressthe shutter release button halfway to acquire focus and exposure and press it all the way down to release the shutter. 8 L_ Note on Touch AF/AE When shooting asubject that is not suitable for auto_cus, the subject may not be in _cus (_ 2%. [] Touch Shooting Setting The touch shooting setting applied in I_1(auto) mode is stored in the camera's memory even after the camera isturned off. _$4

Mode) [] Shooting Modes That Enable Touch AF/AE Function Tile touch AF/AE car/be used in I_1 (auto) mode and other shooting modes. Touch AF/AE operation differs according to the current shootin( mode as follows. Shooting mode Touch AF!AE operation (easy auto) ([.]_ 36), smart portrait mode (when Smile timer is setto Off; _ 50) Iffl (auto) mode (_ 37), Sports, Party/indoor, Beach, Snow, Close-up, Food, Museum, Black and white copy, Backlighting, and 3D photography 1 scene modes ([._ 40) Portrait and Night portrait scene modes (_ 40) Landscape, Sunset, Dusk/dawn, Night landscape, Fireworks show, and Panorama scene modes ([._ 40), smart portrait mode (when Smile timer is set to On; [._ 50) Pet portrait scene mode 2 (_ 40) When the camera detects a face, only a face framed by a border can be selected. When the camera detects more than one face, tap a face framed by a single border to set focus and exposure for that face, The single border changes to a double border. When no face is detected, focus is set for the area tapped. Focus and exposure are set for the area tapped. Only a border displayed by the face detection function can be selected. When the camera detects more than one face, tap a face framed by a single border to move the focus area to that face. Touch AF/AE cannot be enabled. When Pet portrait auto release is set to On: Touch AF/ AE is disabled. When set to Off: Only borders displayed by the pet face detection function can be selected, When the camera detects more than one pet's face, tap a face framed by a single border to set the focus and exposure on that face. 1 The focus and exposure set for the first shot are used for the second shot. 2 Set Pet portrait auto release to Off to enable touch shutter (default setting) or touch AF/ AE. R d) t_ _55

reduces the amount of light needed to make an exposure, allowing pictures to be taken in low light conditions. A hig her sensitivity also allows for faster shutter speeds, reducing blur caused by subject movement or camera shake. • High ISO sensitivity settings are useful when taking pictures in dim lighting, when shooting without a flash, or when using the telephoto setting, but they may also produce"noise" randomly spaced, brightly colored pixels in the dark areas of images. Option ' Description Sensitivity is ISO 125 when there is sufficient lighting; the AUTOAuto (default setting) camera compensates by raising sensitivity to a maximum of ISO 800 when lighting is poor. Limit the camera's automatically adjusted ISOsensitivity range n to between ISO 12S and ISO400. By limiting the ISOsensitivity Is0 Fixed range auto to a maximum of 400, this option moderates the amount of "grain" that appears in pictures. 125, 200, 400, 800, 1600, 3200 Sensitivity is locked at the specified value. _1_ Notes on ISO Sensitivity • There are functions with which this setting cannot be enabled. See "Features That Cannot Be Applied Simultaneously" ([_]_]64) for more information. • When the ISO sensitivity setting is set to any option other than Auto, motion detection ([_ 29) is disabled, _56

Mode) Continuous Select I_ mode -_ MENUtab -_ _ Continuous (auto) Enable continuous shooting or BSS (best shot selector). Option Description [] Single (default One picture is taken each time the shutter_release button is setting) )ressed. While the shutter release button is held down, pictures are taken at a rate of about 8.1 frame per second (fps) when Continuous H Image mode is set to _ 4608x2592. Shooting ends when you remove your finger from the shutter release button or after 3 pictures are taken. While the shutter release button is held down, up to 18 _ictures are taken at a rate of about 1.4frame per second (fps) Continuous L when Image mode is set to I_ 4608x2592. Shooting ends when you remove your finger from the shutter release button. The "best shot selector" is recommended when shooting with the flash off or the camera zoomed in, or in other situations in BSSBSS (Best Shot which inadvertent motion can result in blurred pictures. When Selector) BSS is on, the camera takes up to ten pictures while the shutter release button is held down.The sharpest picture in the series is automatically selected and saved. Each time the shutter-release button is )ressed, camera takes 16 pictures at about 30 frames per second (fps) and _1 Multi-shot 16 arranges them in a single image. • Pictures are recorded at an image mode setting of_ (image size: 2560 x ] 920 pixels). This setting cannot be changed. • Digital zoom is not available. 4" R to _57

16 is selected, the flash is disabled, Focus, exposure, and white balance are fixed at the values determined with the first picture in each series • It may take some time to save the pictures after shooting The amount of time it takes to finish saving the pictures depends on the number of pictures, image mode, the write speed of the memory card, etc • When ISO sensitivity increases, noise may appear in pictures taken • The frame rate with continuous shooting may vary depending upon the current image mode setting, the memory card used, or shooting condition • When Multi-shot 16 is selected, banding or variance in brightness or hue may occur in pictures that were taken under lighting that flickers at high speeds, such as fluorescent, mercury vapor, or sodium vapor lighting • There are functions with which this setting cannot be enabled See "Features That Cannot Be Applied Simultaneously" ([,_] 64) for more information Note on BSS BSS is effective when taking pictures of still subjects BSS may not produce the desired results if the subject moves or the composition changes while the shutter release button is held down [] Pictures Taken in Continuous Shooting Mode Each time pictures are taken using Continuous H or Continuous L, the pictures are saved as a "sequence" (_ 17) [] More Information • See "Subjects Not Suitable for Autofocus" (_ 29) for more information • See "Playing and Deleting Pictures Taken Continuously (Sequence)" (_ 17) for more information _$8

Mode) I_ White Balance (Adjusting Hue) Select i_1 mode -_ MENU tab -_ _]_ White balance (auto) The color of light reflected from an object varies with the color of the light source. The human brain is able to adapt to changes in the color of the light source, with the result that white objects appear white whether seen in the shade, direct sunlight, or under incandescent lighting. Digital cameras can mimic this adjustment by processing images according to the color of the light source. This is known as "white balance." For natural coloration, choose a white balance setting that matches the light source before shooting. Althoug h the default setting, Auto, can be used under most types of lighting, the white balance setting suited to a particular light source can be specified manually to achieve more accurate results. option AUTOAuto (default setting) White balance automatically adjusted to suit lighting conditions. Best choice in most situations. Neutral colored object used as reference to set white balance PRIt Preset manual under unusual lighting conditions. See "Preset Manual" (_ 60) for more information. _i)} Daylight White balance adjusted for direct sunlight. _t)} Incandescent Use under incandescent lighting. Fluorescent Use under fluorescent lighting. Cloudy Use when taking pictures under overcast skies. Flash Use with the flash. d) R d) t_ _1_ Note on White Balance Setting Turn the flash off @ (_ 54) at white balance settings other than Auto or Flash. _59

iseffective with mixed lighting or to compensate for light sources with a strong color cast (for example, to make pictures taken under a lamp with a red shade look as though they had been taken under white light). Follow tile procedure below to measure tile white balance value according to tile light source when shooting. 1 Place a white or gray reference object under the lighting that will be used during shooting. _I Tap the MENUtab and tap WB. 3 Tap PRI:. • The camera zooms in to the position for measuring white balance. 4 Frame the reference object in the Measuring window measuring window. o • To apply the most recently measured value for preset manual, tap Cancel. 5 Tap Measure to measure a value for preset manual. • The shutter is released and the new white balance value isset. No picture is recorded. L_l Note on Preset Manual A value for flash lighdr/g cannot be measured with Preset manual, When shooting using the flash, set White balance to Auto or Flash. _'_60

62) for information about ,_i. Image mode. • See ,,[_/_/_c_ Touch Shooting" (_ 49)in "The Shooting Menu (for a (Auto) Mode)" for information about t_i_c_ Touch shooting. Skin Softening Select [] mode _ MENU tab _ _ Skin (smart portrait) softening Enable skin softening. When the shutter is released, the camera detects one or more human faces (up to three), and processes the image to soften facial skin tones before saving the image. The degree of skin softening applied can be selected from **4 High, ÷÷ Normal (default setting), and • Low. • The effects of skin softening are not visible when framing pictures for shooting. Check the degree of skin softening performed in playback mode. Blink Proof Select [] mode _ MENU tab _ _ Blink (smart portrait) proof When ONOn isselected,the camera automatically releasesthe shutier twice each time a picture istaken. Of the two shots, one in which the subject's eyesare open issaved. • If the camera saved a picture in which the subject's eyes may have been closed, the dialog shown on the right isdisplayed for a few seconds. • Flash cannot be used when ON On is selected. • The default setting is OFFoff. 4- 6 Smile Timer Select [] mode _ MENUtab _ _ Smile timer (smart portrait) When ON On (default setting) is selected, the camera detects human faces and then automatically releases the shutter whenever a smile is detected. • To enable the touch shutter, select OFF Off (_ 51 ). _61

10)for information about _ Favorite pictures. • See "Step 6 Delete Unwantd Pictures" ([_[_32) for information about _1 Delete. • See"Editing Pictures (Still Pictures)" (_ 20)for information about _ Paint and Retouch. m o Slide Shows Enter mode -_ MENUtab -_ _ Slide show playback Play back pictures, stored in the internal memory or on a memory card, one by one in an automated "slide show." 1 Tap Start. • To change tile effects, tap [] (effects) before selecting Start, and select from Classic or Zoom. • To change the interval between pictures, tap [] (frame interval) and select the desired interval before tapping Start. • To repeat the slide show automatically, tap [] (loop) before tapping Start. • Tap [] to play back sample images stored in the camera with an automatic loop function. • To exit without playing back pictures in a slide show, tap _'-_.

to display the operation panel at the bottom of the screen. To Adjust volume Rewind Advance Pause End Tap the icons in the operation panel to perform the corresponding operations. The following operations are available. i Tap [] R r_ L_ Notes on Slide Show • When a movie is played back in a slide show, only its first frame is displayed, • When Key picture only is selected as the method to display sequences (_'_ 17), only the key picture is displayed, • Pictures taken using easy panorama (_'_ 3) are not played back in slide shows, • Slide show effects cannot be specified when the camera is connected via HDMI and 3D pictures are played back in 3D (_'_ 9), Classic is automatically selected, • The maximum playback time is up to 30 minutes even if Loop is enabled (_'_ 88), _-B63

is protected, and tile monitor display returns to tile protect setting screen. • To continue protecting another picture, drag the current picture. • To exit without protecting pictures, tap _'_. _1_ Note on Protecting Pictures Note that formatting the camera's internal memory or the memory card will permanently delete protected flies (_ 89).

at a time. 1 Switch to thumbnail playback mode (1_[_]31), tap the MENUtab, and then tap • The monitor display switchesto the picture selectionscreenfor protection. 2 Tap the desired pictures to be protected. • Whena picture isselected,a checkmark is displayed.Tocancelthe selection,tap the pictureagain. • Tap_ or _ to changethe number of pictures displayed. 3 Tap • Theselectedpictures areprotected. • To exit without protecting pictures,tap I_ Removing Protection from Pictures • To remove protection from a picture, display a protected picture in full frame playback mode, follow the procedure in "Protecting One Picture" (_ d4), and tap Off in step 2. • To remove protection from multiple pictures at a time, uncheck protected pictures in step 2 of"Protecting Multiple Pictures". _6S

When printing pictures stored on the memory caret using any of the following methods, the Print order option in the playback menu is used to create digital "print orders" for printing on DPOF compatible devices. • Inserting the memory card into a DPOF compatible (_:- 17) printer's card slot. • Taking the memory card to a digital photo lab. • Connecting the camera to a PictBridge compatible (_):- 17) printer (_'_ 38). A print order can also be created for pictures stored in the internal memory if the memory card is removed from the camera. Creating a Print Order for One Picture 1 Select the picture to print in full-frame playback mode, tap the MENUtab, and tap _:_. m _'L*. o 2 Tap the desired number of copies (up to nine) and tap Jill. • To makea print orderfor another picture, dragthe current picture before tapping [i}'_. • To quit making the print order setting,tap I_'1 • if the total number of the pictures in a print order, including pictures just added, exceeds gg, the screen shown at right will be displayed. Tap Yes to remove pictures previously added from the print order and restrict the print order to pictures just marked. Tap Cancel to remove the picturesjust added from the print order and restrict the print order to pictures previously marked. _66

to place _ in the checkbox to imprint the shooting date on the picture. • Tap Info to place _ in the checkbox to imprint the photo information (shutter speed and aperture value) on the picture. • Tap [] to complete the print order. Pictures selected for printing are recognized by the _ icon displayed with playback. R d) t_ _67

for Multiple Pictures 1 Switch to thumbnail playback mode (_ 31), tap the MENUtab, and then tap 8. • The monitor display switches to the print order setting screen. 2 m o 2 Tap the desired pictures to print (up to 99) and tap [] or [] at the bottom of the monitor to specify the number of copies (up to nine) for each. • Pictures selected for printing can be recognized by the check mark (e_) and the numeral indicating the number of copies to be printed. Revert the number of copies to [0] to cancel the selection of the picture. • Tap _ or W to change the number of pictures displayed. • Tap [] to remove print markings from aH pictures and cancel the print order. • Tap [] when setting is complete. 3 Choose whether or not to print shooting date and photo information. • Tap Date to place _ in the checkbox to imprint the shooting date on all pictures in the print order. • Tap Info to place _ in the checkbox to imprint the photo information (shutter speed and aperture value) on all pictures in the print order. • Tap [] to complete the print order. _68

in full frame playback mode, follow the procedure in "Creating a Print Order for One Picture" (_ 66),and tap 0 in step 2. • To remove print markings from multiple pictures at a time, remove the print markings of the desired pictures in step 2 of"Creating a Print Order for Multiple Pictures" (_ 68).Tap _ to remove print markings from all pictures. Notes on Printing with Shooting Date and Photo Information When the Date and Info settings are enabled in the print order option, shooting date and photo in_rmation are printed on pictures when a DPOF compatible printer (_:- 17) which supports printing of shooting date and photo information is used. • Photo information cannot be printed when the camera is connected directly to a printer, via the included USB cable, for DPOF printing (_ 43). • Note that Date and Inio settings are reset when the print order option is displayed. • The date printed is that saved when the picture was taken. Changing Date and time or Time zone in the Time zone and date option from the setup menu after a pictu re is taken has no effect on the date printed on the picture. R d) t_ [] Print Date When date and time of recording are imprinted on pictures using the Print date option (_ 84) in the setup menu, pictures are recorded with shooting date and time imprinted on the picture when they are taken, Pictures with the date imprinted on them can be printed from printers that do not support printing of the date on pictures. Only the date and time imprinted on pictures using the Print date option will be printed, even if the date print option is enabled in the Print order menu. _69

Stillpicturescanbe rotated90degreesclockwiseor 90degreescounterclockwise. Picturesthat were recorded in portrait ("tall")orientation can be rotated upto 180 degreesin either direction. 1 Tap the MENUtab in full-frame playback mode and tap _____. See "Using Menus (MENUTab)" (_ 11) for more information. 2 Tap_L_-_. • The rotate image screen is displayed. m o 3 Tap _ or _. Rotate 90 degrees Rotate 90 degrees clockwise counterclockwise • The picture rotates 90 degrees. • Tap [] to finalize display orientation and save the orientation information with the picture. • To exit without rotating image, tap _1 _70

built in microphone to record voice memos for pictures. Recording Voice Memos 2 Tap I_ to record a voice memo. • A voice memo of up to 20 seconds cat] be recorded. • Do not touch the built-in microphone during recording. • To exit without recording voice memos, tap B. • During recording,_ blinksin the monitor. J _ : : _ /_s_ • When r"l istapped during rec°rding I ...... recording ends. • When recording ends, the voice memo playback screen isdisplayed. Follow the instructions in step 2 of "Playing Voice Memos" (_ 72) to play the voice memo. [] More Information See "File and Folder Names" (_'B 98) for more information, _71

icon in full frame playback mode (1_[_8). 1 Tap the MENUtab in full-frame playback mode and tap _, • Thescreenfor playing backvoice memosis displayed. 2 Tap [] to play the voice memo. • Tap ITI to stop playback. • Tap [] to adjust playbackvolume. • To exit without playing voice memos, tap _1. n _,A*. o Deleting Voice Memos Tap Iml in step 2 of"Playing Voice Memos." Tap Yes to delete only the voice memo. L_ Notes on Voice Memos • When a picture with a voice memo attached is deleted, both the picture and its voice memo are deleted, • When a picture with an attached voice memo is protected, neither the picture nor the voice memo can be deleted. • Ifa voice memo already exists for the current picture, it must be deleted before a new voice memo can be recorded. • The COOLPIX $100 is not able to record a voice memo for pictures taken with another make or model of digital camera, _72

playback Copy Copy pictures between the internal memory and a memory card. I Tap a destination option to which pictures are copied in the copy screen, • I_I_ 1_1:Copy pictures from internal memory to memory card. • 1_1_1_1: Copy pictures from memory card to internal memory. 2 Tap a copy option, • Selected images: Copy pictures selected. Proceed to step 3. • All images: Copy all pictures. When a confirmation dialog is displayed, tap Yes. Pictures are copied. To cancel copying, tap No. 3 Tap the pictures to be copied. • When a picture is selected, a check mark is displayed. To cancel the selection, tap the picture again. A check mark is removed. • Tap _ to switch to full frame playback and tap _ to switch back to 12 thumbnail display. 4 Tap • When a confirmation dialog is displayed, tap Yes. Pictures are copied. To cancel copying, tap No. 4" _73

format files can be copied, Files recorded in any other format cannot be copied, • if voice memos (8"_ 71) are attached to pictures selected for copying, voice memos are copied with the pictures. • Operation is not guaranteed with pictures taken with another make of camera or that have been modified on a computer, • When pictures selected for Print order (_'_ 66) are copied, print order marking is not copied with pictures (copies will not be included in the print order), However, rating (_ 72) and protect (8"_ 64) settings are copied with pictures. • Pictures or movies copied from the internal memory or a memory card cannot be displayed in auto sort mode (_ 14). • When a picture that has been added to an album (8"_ 10) is copied, information specifying the album to which the original picture was added is not copied. [] Notes on Copying Pictures Taken in Sequence • If you select a key picture of a sequence in Selected images when only the key picture is displayed for the sequence (8"_ 17), all pictures in the sequence are copied, • if you tap the ME_IUtab and select Current sequence after you tap _ and display pictures in a sequence as individual pictures, all picture in the sequence are copied. • If you tap _ and display pictures in a sequence as individual pictures, only ILl _'1_1 (memory card to internal memory) image copy is available. [] "Memory contains no images." Message If there are no pictures stored on the memory card when playback mode is applied, the message Memory contains no images, will be displayed, Tap the MENUtab, tap r_-_to display the copy option screen, and copy the pictures saved in the camera's internal memory to the memory card. [] More Information See "File and Folder Names" (8"B 98) for more information, Choose Key Picture Enter mode -_ MENU tab "_ _ Choose playback key picture When Sequence display options is set to Key picture only in the setup menu, the key picture displayed in full frame playback mode ([_ 30) and thumbnail playback mode ([_ 31) can be set for each sequence of pictures. • When changing this setting, before tapping the MENUtab, select the desired sequence and then tap I_1 to display it as individual pictures (8-_ 17). • When the key picture selection screen isdisplayed, tap the desired picture and tap _.

mode to _ (movie) -) MENUtab -_ _ Movie options Select the desired movie option to record. Larger image sizesand faster movie bitrates mean greater image quality and larger movie file sizes. • The movie bitrate isthe vohme of movie data recorded per second. Variable bitrate (VBR)encoding is used to automatically adjust the bitrate depending on the subject being recorded. When recording movies of subject with large amounts of motion, the file size increases. • See page 84 for the information on r__axir__ummovie length. • When recording normal speed movies, select one of the normal speed movie options (_ 75),and when recording HS movies, select one of the HS movie options (_ 76). Normal Speed Movie Options Type 1_ HD 1080p'k(1920x10801 (default setting) 1_] HD 1080p (1920x1080) 7"_] HD 720p (1280x720) ,_<,_'_o iFrame 540 (960x540) v'_[] VGA (640x480) Description Movies with an aspect ratio of 16:9 are recorded. This option is suited to playback on a widescreen TV. Movie bitrate: Approx. 14 Mbps Movies with an aspect ratio of 16:9 are recorded. This option is suited to playback on a widescreen TV. Movie bitrate: Approx. 12 Mbps Movies with an aspect ratio of 16:9 are recorded. Movie bitrate: Approx. 9 Mbps Movies with an aspect ratio of 16:9 are recorded. A format supported by AppJe inc. • Movie bitrate: Approx. 24 Mbps Movies cannot be edited (_ 47). When recording movies to the internal memory, recording may stop unexpectedly in some shooting conditions. When recording movies of important events, recording to a memory card (class 6 or higher) is recommended. Movies with an aspect ratio of 4:3 are recorded. Movie bitrate: Approx. 3 Mbps • The frame rate isapproximately 30 frames per second in any options. s" R d) t_ _75

1/8-speed slow motion movies with a 4:3 aspect ratio are recorded. (320x240) Max. recording time*: 10 seconds (playback time: 80 seconds) Movie bitrate: 640 kbps v_i_ HS 120 fps 1/4-speed slow motion movies with a 4:3 aspect ratio are recorded. (640x480) Max. recording time*: 15 seconds (playback time: I minute) Movie bitrate: 3 Mbps 1/2-speed slow motion movies with a 16:9 aspect ratio are 7"_ HS 60 fps recorded. (1280x720) Max. recording time*: 30 seconds (playback time: I minute) Movie bitrate: 9 Mbps _1 HS 15 fps 2x speed fast motion movies with a 16:9 aspect ratio are recorded. (1920x1080) Max. recording time*: 2 minutes (playback time: 1 minute) Movie bitrate: 14 Mbps * The maximum recording time shown here refers only to the portion of the movie that is recorded in slow motion or fast motion. 8 m o [] More Information See"File and Folder Names" (_'B 98) for more information. _-B76

with HS shooting (movie) Open footage Select whether the camera records normal speed movies or HS movies (slow motion or fast motion movies) when movie recording starts. _F Autofocus Mode Set the mode to NJ_ -_ MENUtab -'_ _IAFAutofocus mode shooting (movie) Select the autofocus method used when recording movies. • m Option Descr ptlon AF-S Single AF Focus is locked when movie recording starts. Select this option when the distance between the camera (default setting) and the subject will remain fairly consistent. Camera focuses continuously. Select this option when the distance between the camera and subject will change significantly during recording. The AF-F Full-time AF sound of the camera focusing may be heard in the recorded movie. Use of Single AF is recommended to prevent the sound of the camera focusing from interfering with recording. • When an HS movie option is selected in Movie options, the setting is fixed to Single AF. R _'_ 77

_t Wind Noise Reduction Set the mode to _ -) MENU tab ") _ Wind noise reduction shooting (movie) Select whether wind noise is reduced when recording movies. • When an HS movie option is selected in Movie options, the setting is fixed to Off. m _-e_78

-) I_1Welcome (setup menu) screen Choose whether or not a welcome screen is displayed when the camera is turned on. Option " Description The camera enters shooting or playback mode without None (default setting) displaying the welcome screen. The camera displays a welcome screen and enters shooting or COOLPIX playback mode. Displays a picture selected for the welcome screen. When the picture selection screen is displayed, select a _icture and tap 1_. • in the picture Select an image selection screen, tap _ to switch to full frame playback and tap _ to switch back to 12 thumbnail display. • As the selected picture is stored in the camera, it will be displayed when the camera isturned on even if the original picture is deleted. • Pictures cannot be selected if they were taken using Easy panorama or 3D photography, or created at a size of 640 x 360 or smaller using the crop (_ 34), or small picture (_ 33) function. R m t_ _79

-)' (_ Time and date (setup menu) zone Set the camera clock. Option Date and time Date format Time zone Description Set camera clock to current date and time. Tap the items (day, month, year, hour, and minute) on the displayed screen to set the date and time. • To select the item: tap the desired item. • To edit the highlighted item: tap[] orD. • To apply the setting: tap [] ([_ 23). Select the order in which the day, month, and year are displayed from Y/MID (year/month/day), M/D/Y (month/day/ /ear), and DIMLY (day/month/year). Home time zone (1_) can be specified and dayhght saving time isenabled or disabled. When Travel destination (_]1_)is selected, local time (_ 82) is automatically calculated and shooting date and time in the selected region are recorded with pictures. Useful when travelling. Selecting Travel Destination Time Zone 1 Tap Timezone. • The time zone screen isdisplayed. 2 Tap _I_ Travel destination. • The date and time displayed in tile monitor changes according to the region currently selected. _80

screen is displayed. 4 Tap I'm or Im to choose the travel destination time zone and tap 1_. • If daylight saving time is in effect, tap _! to enable daylight saving time function. % is displayed at the top of the monitor and the camera clock is advanced one hour. Tap [] again to disable the daylight saving time function. • While the travel destination time zone is selected, the _ icon will be displayed in the monitor when the camera is in shooting mode. R d) m [] _ Home Time Zone • To switch to the home time zone, tap _" Home time zone in step 2. • To change the home time zone, tap _" Home time zone in step 2, and complete steps 3 and 4, [] Daylight Saving Time When daylight saving time starts or ends, turn the daylight saving time function on or off from the time zone selection screen displayed in step 4, [] Imprinting Date on Pictures Enable the Print date option (_ 84) in the setup menu after the date and time have been set, When the Print date option is enabled, pictures will be recorded with shooting date imprinted on them, _81

For time zones not listed below, set the camera clock to local time from the Date and time option. UTC+i _ Location UTC÷/_ Location 1 I Midway, Samoa 10 Hawaii,Tahiti g Alaska, Anchorage 8 PST(PDT): Los Angeles, Seattle, Vancouver 7 MST (MDT): Denver, Phoenix 6 CST (CDT): Chicago, Houston, Mexico City EST(EDT): New York, Toronto, S Lima 4.5 Caracas 4 Manaus 3 Buenos Aires, %o Paulo 2 Fernando de Noronha 1 Azores +0 London, Casablanca +1 +2 +3 +4 +5 +5.5 +6 +7 +8 +9 +10 +11 +12 Madrid, Paris, Berlin Athens, Helsinki, Ankara Moscow, Nairobi, Riyadh, Kuwait, Manama Abu Dhabi, Dubai Islamabad, Karachi New Delhi Colombo, Dhaka Bangkok, Jakarta BeUing, Hong Kong, Singapore Tokyo, Seoul Sydney, Guam New Caledonia Auckland, Fiji _82

-_ lul Monitor (setup menu) settings Set the options below. Option Photo info Image review Brightness Description Select whether or not the photo information in the monitor is automatically hidden during shooting and playback. See "Playback Mode (Information Display)" ([_] 8) for more information. • Show info: Photo information is always displayed. • Auto info (default setting): During playback, photo information is hidden if no operations are performed for a few seconds. The information is displayed again when the next operation is performed. During shooting, some of the operation icons and shooting information are hidden if no operations are performed for a few seconds. They are displayed again when [] istapped. • On (default setting): Picture isautomatically displayed in the monitor immediately after it is taken and the monitor display returns to shooting mode. • Off: Picture is not displayed after it is taken. Choose from five settings for monitor brightness. The default setting is3. R to t_ E Auto Monitor Boost The camera automatically increases monitor brightness outdoors and under extremely bright lighting to make the monitor display easier to see and read (when Brightness isset to 4 or less). _'_83

on the pictures with shooting, allowing the information to be printed even from printers that do not support date printing (_'_ dg). Option Description Date Date is imprinted on pictures. [] Date and time Date and time are imprinted on pictures. Off (default setting) Date and time are not imprinted on pictures. At settings other than Off, the icon for the current setting isdisplayed in the monitor ([_ d). m L_ Notes on Print Date • imprinted dates form a permanent part of image data and cannot be deleted, • The date cannot be imprinted in the following situations: When using Sports, Museum, Backlighting (when HDR is set to On), Panorama, Pet portrait (when Continuous is selected), or 3D photography scene mode, When On is selected for Blink proof (_ 52) in smart portrait mode. When Continuous H, Continuous L or BSS is selected for the continuous setting (_'_ 57). When shooting movies, • Dates imprinted at an Image mode setting ([._ 62) of _ 640x480 may be difficult to read. Choose an Image mode setting of [] 1024x768 or larger when using the Print date option, • The date is recorded using the format selected in the setup menu's Time zone and date option (_ 22, _'_ 80). [] Print Date and Print Order If using a DPOF compatible printer that supports the printing of shooting date and photo information, it is possible to use the Print order option (_'_ 66) to print such information even on pictures that were not taken using the Print (]ate option, _84

reduction option for shooting. Vibration reduction reduces blur, caused by slight hand movement known as camera shake, which commonly occurs when shooting with telephoto zoom applied or at slow shutter speeds. The effects of camera shake are reduced when recording movies, in addition to when taking still pictures. Set Vibration reduction to Off when using a tripod to stabilize the camera during shooting. Option " Description The effects of camera shake are reduced optically only using a lens shift method. Additional image processing with electronic vibration reduction is applied to further reduce the effects of camera shake with recording of still pictures taken under the following conditions. _ On (hybrid) When flash is disabled. When a shutter speed slower than 1/60 seconds is used. When Self-timer is disabled. When Single is selected for the Continuous setting. When ISO sensitivity is set to 200 or less. The vibration reduction using the lens-shift method only is enabled. _[_}On (default setting) Off Vibration reduction is not enabled. The current vibration reduction setting can be confirmed in the camera monitor with shooting ([_ 6). When Off is selected, no icon isdisplayed. Notes on Vibration Reduction • Vibration reduction may take a few seconds to activate after the power is turned on, or the camera enters shooting mode from playback mode. Wait until the image of the monitor stabilizes before shooting, • Due to characteristics of the vibration reduction function, images displayed in the camera's monitor immediately after shooting may be displayed blurry, • Vibration reduction may be unable to completely eliminate the effects of camera shake in some situations. • image processing with electronic vibration reduction may not perform as expected with very slight or extreme camera shake, even when On (hybrid} is selected, • image processing with electronic vibration reduction is not enabled at fast or extremely slow shutter speeds, even when On (hybrid} is selected, • When On (hybrid} is selected and electronic vibration reduction is activated, the shutter is automatically released twice when a picture is taken to allow for image processing, Therefore, the time required to record pictures increases, Shutter sound (_ 87) can be heard only when the shutter is released the first time and a single picture will be recorded, R d) t_ _85

-_ --111tAF assist (setup menu) Enable or disable AF assist illuminator, which assists autofocus operation when the subject is dimly lit. Option " Description AF-assist illuminator will be used to assist the focus operation Auto (default setting) when the subject is poorly lit. The illuminator has a range of about 5 m (16 ft). Note that for some scene modes or focus areas, AF assist illuminator may not light. Off Disable this function. The camera may be unable to focus under poor lighting. o Digital Zoom MENU tab --) V ") [] (setup menu) Digital zoom Enable or disable digital zoom. Notes on Digital Zoom • The camera _cuses on the su_ect at the center of the frame when digital zoom isin effect. • Digital zoom cannot be used in the following situations: When Portrait, Night portrait, Night landscape, Backlighting (when HDR isset to On), Panorama (when Easy panorama is selected), Pet portrait, or 3D photography scene mode isselected When smart portrait mode is selected Subject tracking isselected for the touch shooting setting When Multi-shot 16 isselected (_ 57) _86

-_ _) Sound (setup menu) settings Adjust the following sound settings. Option " Descri Turn button sound On (default setting) or Off. When On default setting) is selected, beep will sound once when Button sound operations are completed successfully, twice when the camera acquires focus on the subject, and three times when an error is detected. Start-up sound will also play when the camera is turned on. Choose shutter sound from On (default setting) or Off. Shutter sound No sound is played with shutter release when some features such as continuous shooting or BSS(best shot selector) are enabled, or when recording movies, even if On is selected. 4" R d) t_ _1_ Note on Sound Settings In Pet portrait scene mode, button and shutter sounds are disabled. _87

any operations having been performed, the monitor will be turned offand the camera will enter standby mode ([_ 21) to save power. Choose the time allowed to elapse before the camera enters standby mode if no operations are performed from 30 s, 1 min (default setting), 5 min, and 30 min. Press the shutter release button to cancel standby mode. m rD _'A*, o m Notes on Auto Off Regardless of the option selected, the monitor will remain on as follows: • When a setting screen is displayed: three minutes • During slide show playback: up to 30 minutes [] Notes on Auto Off When the Camera is Powered by AC Adapter • When the AC Adapter EH 62G (available separately; _ 99) is used, a screen saver function is activated to prevent screen burn if no operations are performed for the time selected for the Auto off option (which is fixed to three minutes while a setting screen is displayed). Press the shutter release button to reactivate the monitor, If no operations are performed for 30 minutes while the screen saver is on, the monitor turns off, • The pictures used for the screen saver are the same as those displayed when [] is tapped with slide show display (_'_ 62), though no background music is played, • in the following cases, the monitor turns off without the screen saver function being activated: When no operations are performed for 30 minutes with 30 rain selected for Auto off, except when a setting screen is displayed, When a slide show lasts for 30 minutes. • When the camera is con netted to a TV or printer, the screen saver function is not activated and the camera does not enter standby mode even when no operations are performed for an extended period of time, _88

-) I_l/[._.j Format card (setup menu) memory/Format Use this option to format tile internal memory or a memory card. Formatting tile internal memory or memory cards permanently deletes all data. Deleted data cannot be recovered. Be sure to transfer important pictures to a computer before formatting. Formatting the Internal Memory To format tile internal memory, remove tile memory card from the camera. Tile Format memory option is displayed in tile setup menu. Formatting a Memory Card When a memory card is inserted in the camera, the Format card option isdisplayed in the setup menu and tile memory card is formatted. s" R d) t_ Formatting Internal Memory and Memory Cards • Formatting the internal memory or memory card restores album icon settings (_9_ 13)to the default setting (displayed as number). • Do not turn the camera off or open the battery chamber/memory card slot cover du ring formatting. • The first time you insert a memory card that has been used in another device into this camera, be sure to format it with this camera. _89

-_ (setup menu) Language Choose one of 2g languages for display of camera menus and messages. Dansk Czech Danish German (default setting) PyccK,_R Russian Rom_n_ Romanian Suomi Finnish Espa_ol i Spanish Ti_ng Vi(_t Vietnamese EAArlVlK_ iGreek T_irkqe Turkish Fran_:ais i French YKpa'l'HCbKa Ukrainian .....,,_w_,_ indonesia indonesian _J-_ Arabic Italiano italian _@_ Simplified Chinese Magyar Hungarian _ Traditional Chinese Nederlands Dutch Et_ Japanese _W_,_T,_, Norsk Norwegian Polski Polish Portugu_s (BR) Brazilian Portuguese Portugu_S (PT) Portuguese _ Korean .1_i_,_ Thai Hindi _=6 9 0

-_ _ TV (setup menu) settings Adjust settings for connection to a television. The Setup Menu Video mode Choose from NTSC and PAL. HDMI HDMI device control HDMI 3D output Choose a picture resolution for HDMI output from Auto default setting), 480p, 720p, or 1080i. When Auto is selected, the option best suited to the high definition TV to which the camera isconnected isautomatically selected from 480p, 720p, or 1080i. Set whether or not tile camera receives signals from an HDMI- CEC compatible television when connected with an HDM] cable. Select On (default setting) to use the television's remote control to perform playback operations. See "Using a TV Remote Control (HDMI Device Control)" (_ 37) for more information. Set the method used to output 3D pictures to HDMI devices. Select On (default setting) to three dimensionally play back 3D _ictures taken with this camera on a TV or monitor that is connected via HDMk k_ R m t_ m HDMI and HDMI-CEC "HDMI" isthe abbreviation _r High Definition Multimedia Inter_ce and isone type of multimedia interface. "HDMI CEC"isthe abbreviation for HDMI Consumer Electronics Control, which enables compatible devices to control each other and allows the user to operate multiple devices with one remote controk

MENU (setup menu) Charge by computer tab ..) Y ..) Choose whether or not the battery inserted into the camera ischarged when the camera is connected to a computer via the LJSBcable. Option Description r' When the camera is connected to a computer that is running, Auto (default setting) the battery inserted into the camera is automatically charged using power supplied by the computer. The battery inserted into the camera is not charged when the Off camera is connected to a computer. m rD _'A*. o _1_ Notes on Connecting the Camera to a Printer • The battery cannot be charged with connection to a printer, even if the printer complies with the PictBridge standard. • When Auto is selected for Charge by computer, it may be impossible to print pictures with direct connection of the camera to some printers, if the PictBridge startup screen is not displayed in the monitor after the camera is connected to a printer and turned on, turn the camera off and disconnect the USB cable. Set Charge by computer to Off and reconnect the camera to the printer. _1_ Notes on Charging with Connection to a Computer • The battery cannot be charged, nor can data be transferred, when the camera is connected to a computer before the camera's display language and date and time have been set (_ 22). If the camera's clock battery ([.]]_] 23) has been exhausted, the date and time must be reset before the battery can be charged or images can be transferred with connection to a computer, In this case, use the Charging AC Adapter EH 69P ([.]]_] 16) to charge the battery and then set the camera's date and time, • If the camera is turned off by opening and closing the slide cover, charging will also stop. • Ifa computer enters sleep mode while charging, charging may stop. If the camera remains connected to the computer in sleep mode, the battery runs low because the battery power continues to be consumed until you turn offthe camera by opening and closing the slide cover. • When disconnecting the camera from a computer, turn the camera off by opening and closing the slide cover and then disconnect the USB cable. • About 3 hours and 45 minutes are required to charge a fully exhausted battery. Charging time increases when images are transferred while the battery is charging. • When the camera is connected to a computer, an application installed on the computer, such as Nikon Transfer 2, may start, if the camera was connected to the computer for the sole purpose of charging the battery, exit the application. • The camera turns offautomatically if there is no communication with the computer for 30 minutes after the battery has finished charging. • Depending upon computer specifications, settings, and power supply and allocation, it may be impossible to charge the battery inserted into the camera via computer connection. _92

Power-on lamp Description (orange) Battery charging, G!O_S (green)Battery not charging, Charging is complete when the power on brnp stops blinking orange and glows green, The ambient temperature is not suited to charging, Charge the battery indoors with an ambient temperature of S°C to 35°C (41°F to 9S°F), A UBB cable is not correctly connected or the battery is faulty. Reconnect Flickers (orange) the USB cable correctly or replace the battery. Computer is in sleep mode and does not supply power, Reboot the computer, The battery cannot be charged because the computer's specifications or settings do not support power supply to the camera. Blink Warning MENUtab "_ V -)' _ Blink (setup menu) warning Specify whether or not the camera detects human subjects that blink when shooting with face detection ([_ 69 in the following modes. • I_ (easy auto) mode ([_ _6) or I_1 (auto) mode ([_ 37). • Portrait ([_ 42) or Night portrait ([_ 43) is selected for the scene mode. S" R d) t_ On When the camera detects that one or more human subjects may have blinked in a picture taken using face detection, the blink warning screen is displayed in the monitor. The face of the human subject that may have blinked when the shutter was released isframed by ayellow border. Should this occur, check the picture and determine whether or not another picture should be taken. See "Operating the BJink Warning Screen" (_ 94) for more information. Off (default setting) BJink warning is not enabJed. _1_ Note on BlinkWarning Blink detection does not function at continuous settings of Continuous H, Continuous L, BSS, or Multi-shot 16.

Screen When the blinkwarning screen shown at right is displayed in the monitor, the operations described below are available. If no operations are performed within a few seconds, the camera automatically returns to shooting mode. Enlarge the detected face that blinked Tap ¸¸ Switch to fulPframe playback Del--ete pictures _"=.............................. n .............................. Switch tO ShOOting [] mode Tap _. If the camera detects that more than one human subject blinked, tap [] or [] to switch display to another face. Tap _. Tap IPi Tap _.The shutter-release button can also be )ressed to return to shooting mode. Sequence Display Options MENU (setup menu) Sequence display options tab ,.) Y ..) u_ Choose the method used to display a series of pictures taken continuously (sequence) (_ 17) when viewing them in full frame playback mode ([_[_ 30) and in thumbnail playback mode ([_ 31). Settings are applied to all sequences, and the setting is saved in the camera's memory even if the camera is turned off. Option Description Set all pictures in all sequences to be displayed individually. I_ Individual pictures is displayed on the playback screen ([_ 8). Key picture only (default Set aHsequences to be displayed using their key pictures only. setting) _94

V -)' ril Reset all (setup menu) When Reset is selected, the camera's settings will be restored to their default values. Basic Shooting Functions Shooting Menu ....o_............................. _6pt_oo_________oT,,,,o÷oo÷ ..... Defaultvalue Image mode ([_ 62) Touch shooting (_ 50, _ 52, _ 54) ISO sensitivity (_ 56) Continuous (_ 57) White balance (_ 59) Scene Mode I_ 4608x2592 Touch shutter Auto Single Auto Option "°_'_ Default value Scene effect adjustment slider ([_ 41) Center HDR (when Backlighting is selected) ([_ 46) Panorama ([]_] 47) Continuous (when Pet portrait is selected) ([_ 48) Pet portrait auto release (when Pet portrait is selected) ([[_ 48) Smart Portrait Mode Option 1'_ _ Default value .... Skin softening ([_ 52) l _rmal Blink proof ([_ 52) _ Off Smile timer (_ 52) ] off Easy panorama (Normal (180°)) Continuous On S" R to n _95

(_'_ 78) Off Setup Menu Option "_'! Default value Welcome screen (_ 79) None Photo info (_'_ 83) Auto info Image review (_'_ 83) On Brightness (_'_ 83) 3 Print date (_'_ 84) Off Vibration reduction (_'_ 85) On AF assist (_'_ 86) Auto Digital zoom (_'_ 86) On Button sound (_'_ 87) On Shutter sound (_'_ 87) On Auto off (_ 88) 1min HDMI (_'_ 91) Auto HDMI device control (_'_ 91 ) On HDMI 3D output (_'_ 91) On Charge by computer (_'_ 92) Auto Blink warning (_'_ 93) Off

98) from memory. Numbering will continue from the lowest number available. To reset file numbering to "0001", delete all pictures stored in the internal memory or on the memory card ([_ 32) before selecting Reset. • The following settings will remain unaffected even when Reset all isset to Reset. Shooting menu: Preset manual data (_ 60) acquired for White balance Playback menu: Choose key picture (_ 74) Setup menu: Time zone and date (_ 80), Language (_ 90),and Video mode (_ 91) under TV settings, and Sequence display options (_ 94) Firmware Version MENUtab -) V =)' Ve[F (setup menu) rmware vers on View the current camera firmware version. k_ _97

Unedited still pictures (voice memo attachment included), movies Cropped copies (voice memo i attachment included) Small copies (voice mem° attachment included) Copies created using editing functions other than Small pictureand crop(voice memo FSCN attachment included) and moviescreated by movie editing function Copies created in Drawscene MSCN mode Extension (signifies the file type) DSCN RSCN SSCN .......................................................... File number (assignedautomatically in ascending order, starting with "0001") m o • Files are stored in folders named with a folder number followed by an identifier: "P_" plus a three digit sequential number for pictures taken in Panorama assist scene mode (e.g. "101P_O01"; _'_ 6), and "NIKON" for all other pictures (e.g."100NIKON'). When the number of files within a folder reaches 9999, a new folder will be created. File numbers will be assigned automatically starting with %001 ." • Voice memo file names have the same identifier and file number as the picture to which the voice memo is attached. • Files copied using Copy>Selected images are copied to the current folder, where they are assigned new file numbers in ascending order starting from the largest file number in memory. Copy>All images copy all folders from the source medium; file names do not change but new folder numbers are assigned in ascending order, starting from the largest folder number on the destination medium (_'_ 73). • A sing le folder can hold up to 200 files; if the current folder already contains 200 files, a new folder, named by adding one to the current folder name, will be created the next time a file is stored. If the current folder is numbered 999 and contains 200 files, or a file is numbered 9999, no further files can be stored until the internal memory or memory card isformatted (_ 89), or a new memory card is inserted. _98

Charging AC Adapter EH-69P1'2 Battery Charger MH-66 AC Adapter EH-62G (connect as shown) 2 3 Be sure that the power connector cord has been properly aligned in >ower connector and battery chamber grooves before closing the battery

solutions for dealing with them. Display Description Solution (blinks) Clock not set. 0 Battery exhausted. Battery exhausted. ¢ Battery temperature high Battery temperature is high. (D Inside of the camera or the The camera will memory card has become turn off to prevent hot. overheating. ¢ The slide cover (power Check the sliding switch) is not fully open. Cover _[_e (0 blinks red) ¢ Please wait for the camera to finish recording. @ Memory card is write protected. ¢ This card cannot be used. ¢ This card cannot be read. Camera cannot focus. Camera cannot perform other operations until recording is complete. Write-protect switch is in "lock" position. Error accessing memory card. Set date and time. _ 80 Charge or replace battery. 14, 16 Turn off camera, and allow battery to cool down before resuming use.When this message appears, the power-on lamp blinks rapidly for five seconds and the monitor turns off. 21 Turn off camera, and allow battery to cool down 21 before resuming use. Open or close the slide 21 cover fully. 28, 29 39 Refocus. Focus on another subject positioned at the same distance from the camera as the intended subject. Wait until message clears from display automatically when recording is complete. Do not open the battery-chamber/memory card slot cover during recording. Slide write-protect switch to "write" position. Use approved card. Check that terminals are clean. Confirm that memory card is correctly inserted. 19 18 18 _100

formatted. Format card? Yes No Out of memory. .......... _'Description Memory card has not been formatted for use in COOLPIX S]O0. ¢ image cannot be saved. Memory card isfull. Error occurred while recording picture. Camera has run out of file numbers. Picture cannot be used for the welcome screen. Insufficient space to save a copy. -'':°--%?[1_ Formatting deletes all data stored on the memory card. Besure to select No and make copies of any pictures which need to be kept before formatting the memory card. Tap Yes to format. Choose smaller image size. Delete pictures. Insert new memory card. Remove memory card and use internal memory. Format internal memory or memory card. Insert new memory card. Format internal memory or memory card. The following types of pictures cannot be used for the welcome screen: Pictures taken with Easy panorama or 3D photography, and pictures reduced to 640 x 360 or smaller size with small picture editing or cropping Pictures taken with cameras other than the COOLPIX 5100 Delete pictures from destination. q3 18 62 32,_ 19 18 19 89 18 89 33, 34 32 R d) t_ _101

Check the picture in detected in the playback mode. picture just taken. (_) Cannot edit selected Select pictures that support Image cannot be modified. )icture. editing functions. (_) Time out error while Choose memory card with Cannot record recording movie on the faster write speed. movie, memory card. 0 Memory contains no images. 0 File contains no image data. ¢ This file cannot be played back. @ All images are hidden. One or more portrait subjects may have blinked when the picture was taken. No pictures in the internal memory or memory card. 2O 19,83 19 73 Remove the memory card from the camera to play back pictures stored in the camera's internal memory. To copy pictures from internal memory to memory card, tap the MENUtab and tap _. The copy option screen will be displayed and pictures in the internal memory can be copied to memory card. Add pictures to album. Choose the album to which picture was added. Select the category containing the sorted )ictures. The picture has not been _ 10 added to album. No pictures are contained in the category selected in _ 14 auto sort mode. File not created with COOLPIX $100. No pictures available for a slide show. Use the computer or other device with which the file was created or edited for playback. _'_ 102

Picture is protected. Disable protection. be deleted. 0 Travel destination is Destination in same time in the current time zone as home. zone. @ Rating maximum reached. No further 999 pictures have already Cancel the rating setting of been rated, them. pictures can be rated. (9 No images with this rating found. @ Unable to create panorama. Unable to create panorama. Pan the camera in one direction only. Unable to create panorama. Pan the camera more slowly. @ Failed to take second shot @ Failed to save 3D image There are no pictures with the selected rating. Could not shoot using easy )anorama. When taking 3D pictures, the second shot could not be successfully taken after the first shot. Failed to save the 3D )ictures. Apply the rating to pictures. Select a rating that has been applied to pictures. Shooting with easy panorama may not be possible in the following situations. When shooting does not end after a certain amount of time. When the camera is moved too fast. When the camera is not moved properly in the panorama direction. Try shooting again. After taking the first shot, move the camera horizontally and frame the subject so that it is aligned with the guide. In some shooting conditions, such aswhen the subject is dark or low in contrast, the second shot may not be taken. Try shooting again. Delete unnecessary pictures. 3D pictures may not be created depending on the subject or shooting conditions, resulting in failure to save them. 8O 72 72 _3 _8 _8 32 R d) t_ 103

@ Initializing lens. Cannot focus. ¢ Communications error System error @ ¢r_ Printer error: check printer status. ¢r_ Printer error: check paper ¢r_" Printer error: paper jam ¢r_" Printer error: out of paper ¢r_" Printer error: check ink ¢r_" Printer error: out of ink ¢r_" Printer error: file corrupt Description _-_'"!_?_"iu_ Turn camera off and then on again. If error persists, Lens error, contact retailer or Nikon- 20, 21 authorized service representative. Wait for the camera to The camera cannot focus. recover automatically. Error occurred during Turn camera off, reconnect _'_ 39 communication with USB cable. )rinter. Turn camera off, remove and reinsert battery, and Error has occurred in turn camera on. If error camera's internal circuitry, persists, contact retailer or 14, 20 Nikon-authorized service representative. Check printer. After solving Printer error, the problem, tap Resume to resume printing.* Load the specified paper, Specified size of paper is and tap Resume to not loaded in printer, resume printing.* Paper has jammed inthe Eject the jammed paper, and tap Resume to )tinter. resume printing.* Load the specified paper, No paper is loaded in and tap Resume to )tinter. resume printing.* Check ink, and tap Ink error. Resume to resume printing.* Replace ink cartridge, and Ink cartridge is empty, tap Resume to resume printing.* An error caused by the Tap Cancel to cancel image file has occurred, printing. * See the documentation provided with your printer for further guidance and information. _'6104

Maximizing Camera Life and Performance ......................................................................................... _',- 2 Memory Cards ............................................................................................................. _- 4 Cleaning ......................................................................................................................... _:)i-5 Storage ........................................................................................................................... _)i- 5 Troubleshooting ........................................................... _',- 7 Specifications .............................................................. _',- 14 Supported Standards ............................................................................................. _)i- 17 Index ............................................................................ _:- 18 2- z o Q_

enjoyment of this Nikon product, observe the precautions described below in addition to the warnings in "For Your Safety" ([_ vi) when using or storing the device. _1_ Keep Dry The device will be damaged if immersed in water or su_ected to high humidity. _1_ Do Not Drop The product may mal_nction if su _ected to strong shock or vibration. _1_ Handle the Lens and All Moving Parts with Care Do not apply _rce to the lens, monitor, memory card slot or battery chamber, These parts are easily damaged, Applying _rce to the lens cover could result in camera mal_nction or damage to the lens, Should the monitor break, care should be taken to avoid injury caused by broken glass, _1_ Do Not Point the Lens at Strong Light Sources for Extended Periods Avoid pointing the lens at the sun or other strong light sources _r extended periods when using or storing the camera. Intense light may cause deterioration of the image sensor, producing a white blur effect in photographs, _1_ Keep Away from Strong Magnetic Fields Do not use or store this device in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields, Strong static charge or the magnetic fields produced by equipment such as radio transmitters could interfere with the monitor, damage data saved on the memory card, or affect the product's internal circuitry, _1_ Avoid Sudden Changes in Temperature Sudden changes in temperature, such as when entering or leaving a heated building on a cold day, can cause condensation to form inside the device, To prevent condensation, place the device in a carrying case or a plastic bag before exposing it to sudden changes in temperature, Turn the Product Off Before Removing or Disconnecting the Power Source or Memory Card Do not remove the battery while the product is on, or while images are being saved or deleted, Forcibly cutting power in these circumstances could result in loss of data or in damage to product memory or internal circuitry,

[] The Battery • Check the battery level before using the camera and replace or charge the battery if necessary. Do not continue charging once the battery is fully charged as this will result in reduced battery performance, Whenever possible, carry a fully charged spare battery when taking pictures on important occasions, • Do not use the battery at am blent temperatures below O°C (32°F) or above 40°C (104°F). • Charge the battery indoors with an ambient temperature of 5°C to 35°C (41 °F to 95°F) before use, • When charging the battery inserted into the COOLPIX $100 using the Charging AC Adapter EH 69P or a computer, the charge capacity may decrease at ambient temperatures 45°C to 60°C (113°F to 140°F). • The battery is not charged at battery temperatures below O°C (32°F) or above 60°C (140°F). • Note that the battery may become hot during use; wait for the battery to cool before charging. Failure to observe these precautions could damage the battery, impair its performance, or prevent it from charging normally. • On cold days, the capacity of batteries tends to decrease, Be sure that the battery is fully charged before heading outside to take pictures in cold weather. Keep spare batteries in a warm place and exchange as necessary, Once warmed, a cold battery may recover some of its charge. • Dirt on the battery terminals can prevent the camera from functioning. Should the battery terminals become dirty, wipe them off with a clean, dry cloth before use. • If the battery will not be used for some time, insert it in the camera and run it flat before removing it for storage. The battery should be stored in a cool location with an ambient temperature of 1S°C to 25°C (S9°F to 77°F), Do not store the battery in hot or extremely cold locations. • Always remove the battery from the camera or optional battery charger when it is not being used. When inserted, minute amounts of current are drawn from the battery even when not in use, This may result in excessive draining of the battery and complete loss of function. Tu rning the camera on or off while the battery is exhausted can result in reduced battery life. • Recharge the battery at least once every six months and completely exhaust it before returning it to storage, • After removing the battery from the camera or optional battery charger, put the battery in the included battery case and store it in a cool place, • A marked drop in the time a fully charged battery retains its charge, when used at room temperature, indicates that the battery needs to be replaced. Purchase a new EN EL19 battery. • Replace the battery when it no longer holds a charge, Used batteries are a valuable resource. Please recycle used batteries in accordance with local regulations. [] Charging AC Adapter Information • The Charging AC Adapter EH 69P is _r use only with compatible devices. Do not use with another make or model of device, • The EH 69P is compatible with AC 1O0 240 V, 50/60 Hz electrical outlets, When using in other countries, use a plug adapter (available commercially) as necessary, For more information about plug adapters, consult your travel agency, • Do not, under any circumstances, use another make or model of AC adapter other than Charging AC Adapter EH 69P or USB AC adapter, Failure to observe this precaution could result in overheating or in damage to the camera, 2- z o o_

Memory Cards" ([_ ]9) for more information about memory cards. • Be sure to follow the precautions described in the documentation included with the memory card. • Do not put labels or stickers on memory cards. • We recommend using the camera to format memory cards that have never been used with the camera. Before using a memory card that was previously used in another device, be sure to use this camera to format the memory card. • Note that formetting permenently deletes ell pictures end other dete on the memory card. Be sure to make copies of any pictures you wish to keep before formatting the memory card. • If the message Card is not formatted. Format card? isdisplayed after you insert a memory card into the camera, the memory card must be formatted. If there isdata that you do not want to delete, tap No. Copy the necessary date to a computer, etc. If you want to format the card, tap Yes. The confirmation dialog will be displayed. To start formatting, tap OK. • Do not perform the following during formatting, while data is being written to or deleted from the memory card, or during data transfer to a computer. Failure to observe this precaution could result in the loss of data or in damage to the camera or memory card: Open the battery chamber?memory card slot cover to remove/insert the battery or memory card. Turn off the camera. Disconnect the AC adapter. • Do not format the memory card using a computer.

Cleaning Do not use alcohol, thinner, or other volatile chemicals. -T!_'_ Avoid touching glass parts with your fingers. Remove dust or lint with a blower (typically a small device with a rubber bulb attached to one end that is pumped to produce a stream of air out the other end). To remove fingerprints or other stains that cannot be removed with a blower, wipe the lens with a soft, dry cloth or a cloth for cleaning glasses, using a spiral motion that starts at the center of the lens and working toward the edges. Wiping with too much force or with a hard cloth may damage the lens or cause it to malfunction. If dust or lint still remains, clean the lens using a cloth lightly dampened with commercial lens cleaner. --_-_,°7'',,,,,,R,e,,m,,_,v,e,,,,,d,,u,,s,i,,,,,_,,[],,i,,n,,i,,,,wTi,h,,,,,a,,,,,bT_,w,e,rT,,,T,_,,,,,r,e,m,,_,v,e,,,,f,ingerprints and other stains Monitor wipe the monitor with a soft, dry cloth or a cloth for cleaning glasses, being careful not to apply pressure. Wiping with too much force or with a hard cloth may damage the monitor or cause it to malfunction. _I_ Use a blower to remove dust, dirt, or sand, then wipe gently with a soft, dry cloth. After using the camera at the beach or other sandy or dusty Body environment, wipe offany sand, dust, or salt with a dry cloth lightly dampened with fresh water and dry thoroughly. Note that foreign matter inside the camera could cause damage not covered by the warranty. Storage Turn the camera off when not in use. Be sure that the power on lamp is off before putting the camera away. Remove the battery if the camera will not be used for an extended period. Do not store the camera with naphtha or camphor moth balls, or __. in any of the following locations: z • Next to equipment that produces strong electromagnetic fields, such as o televisions or radios • Exposed to temperatures below -10°C (14°F) or above 50°C (122°F) o_ • Places that are poorly ventilated or subject to humidity of over 60% x_ To prevent mold or mildew, take the camera out of storage at least once a month. Turn the camera on and release the shutter a few times before putting the camera away again. For storing the batte% follow the precautions in "The Battery" (_):- 3) in "Maximizing Camera Life and Performance".

do not light. This does not indicate a malfunction. Images recorded using the product will not be affected. • Due to the general characteristics of OLED monitors, prolonged or repeated display of the same screen or image may result in screen burn. Screen burn can be recognized by decreased brightness in portions of the monitor or mottled display. In some cases, screen burn may become permanent. However, pictures are in no way affected by screen burn. To prevent screen burn, do not set monitor brightness higher than necessary and do not display the same screen or image for an extended period of time. • Images in the monitor may be difficult to see under bright lighting. • The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your Nikon authorized service representative. n o_ m

fails to function as expected, check the list of common problems below before consulting your retailer or Nikon authorized service representative. Power Supply, Display, and Settings Problem Cause/Solution [_JZ] Battery inserted in the camera cannot be charged. Camera cannot be turned on. Camera turns offwithout warning Monitor is blank • Confirm all connections. • Off is selected for Charge bycomputer in the setup menu. • When charging by connecting the camera to a computer, battery charging stops when the camera is turned off. • When charging by connecting the camera to a computer, battery charging may stop when the computer is suspended (sleeping). • Depending upon computer specifications, settings, and status, it may be impossible to charge the battery inserted into the camera via computer connection. • Battery isexhausted. • The camera cannot be turned on while connected to an electrical outlet via the Charging AC Adapter. • Battery isexhausted. • The camera and battery may not work properly at low temperatures. • If connecting the Charging AC Adapter while the camera is on, the camera turns off. • The camera turns off if the USBcable connecting it to a computer or printer is disconnected. Reconnect the USBcable. • The internal temperature of the camera or the memory card is high. Allow the camera and memory card to cool and turn on the camera again. • Camera isoff. • Standby mode for saving power: press the shutter release button halfway. • Camera and computer are connected via the USBcable. • Camera and TV are connected via audio/video cable or HDMI cable. ]6 90, _ 92 _5 92 92 20 ]6 i20 ]6 75, _ 39 2], ]00 20 21, _ 88 75 5, _ 35 £- z o s_ Y

darkened [)ate and time of recording are not correct Cause/Solution [_[ZI 88, _ 83 • Adjust monitor brightness. • When the internal temperature of the camera is high, the monitor darkens to reduce heat generation. When internal temperature cools, the monitor brightens again. • When the power-on lamp iscovered after the camera has automatically increased monitor brightness, the monitor may darken. • Monitor isdirty. Clean monitor. • If camera dock has not been set,"Date not set" indicator blinks during shooting and movie recording. Pictures and movies recorded before dock is set are dated %0/00/0000 00:00" or "01/01/2011 00:00" respectively. Set the correct time and date from the Time zone and date option in the setup menu. • Check camera clock regularly against more accurate timepieces and reset as required. Auto info is selected for Photo info in Monitor settings of the setup menu. • Time zone and date setting has not been made in the setup menu. • Another function that restricts the Print date option isenabled. • Another function that restricts the Print date option isenabled. • Selected shooting mode does not support Print date. • Tile date cannot be imprinted on movies. Clock battery is exhausted; all settings were restored to their default values. 23, 88, 8O No indicators displayed in 88, 83 monitor Print date not available 64t_ 80 Date not imprinted on pictures even when Print _'_ 84 date is enabled 23 Screen for setting date and time is displayed when camera is turned on. Camera settings reset Monitor turns off, and the power-on lamp blinks green rapidly. Battery temperature is high. Turn off camera and 21 allow battery to cool down before resuming use. The camera may become hot when shooting Camera becomes hot. movies for an extended period of time or when the camera is used in a hot area; this is not a malfunction. _78

camera may stop functioning. In most cases,this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the battery, then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon authorized service representative. Note that disconnecting the power source as described above may result in the loss of any data not recorded to internal memory or the memory card at the time the problem occurred. Data already recorded will not be affected. Shooting Problem 30 No picture taken. 2O 54 Cannot take 3D pictures Cannot switch to shooting mode. Camera cannotfocus. Pictures are blurred. Bright specks appear in pictures taken with flash. Flash does not fire. Cause/Solution • When camera is in playback mode, or setting items or setup menu are displayed, press the shutter release button. • Battery isexhausted. • When flash indicator blinks, flash ischarging. In some shooting conditions, such as when the subject is dark or low in contrast, the second shot may not be taken or the 3D picture may not be saved. Disconnect HDMI cable, audio/video cable, or USBcane. • Subject is too close. Try shooting using macro mode, easy auto mode, or Close-up scene mode. • The intended subject is not suitable for autofocus. • Set AF assist in the setup menu to Auto. • Turn camera offand then on again. • Use flash. • Increase ISO sensitivity value. • Enable vibration reduction. • Use BS_(Best Shot Selector). • Use tripod and self timer. Flash is reflecting off particles in air. Set the flash mode setting to _ (off). • The flash mode setting is setto @ (off). • Scene mode with which the flash does not fire is selected. • On isselected for Blink proof in smart portrait mode. • Movie is selected for shooting mode. • Another function that restricts flash is enabled. 75,_35 i36,44,s8 29 89,_86 i38,_56 89,_85 38,_57 56 54 6O 52 82 64 2- z o

in the setup menu. 89, _ 8_6 Digital zoom cannot be used. Image mode not available. No sound when the shutter is released. AF-assist illuminator does not light. Pictures appear smeared. Colors are unnatural. Randomly spaced bright pixels ("noise") appear in image. Pictures are too dark (underexposed). Pictures are too bright (overexposed). • Digital zoom is not available in the following situations. When Portrait, Night portrait, Night landscape, Backlighting (when HDR is set to On), Panorama (when Easy panorama isselected), Pet portrait, or 3D photography scene mode isselected - Touch shooting is set to Subject tracking - When shooting in smart portrait mode - When Multi-shot 16 isselected for the Continuous setting Another function that restricts the Image mode option isenabled. • Off is selected for Sound settings>Shutter sound in tile setup menu. No sound is heard with some shooting modes and settings, even when On is selected. • The speaker is blocked. Do not cover the speaker. Off is selected for the AF assist option in the setup menu. AF assist illuminator may not light depending on the position of the focus area or the current scene mode, even when Auto is selected. Lens is dirty. Clean lens. White balance does not match light source. Shutter speed too slow or ]SOsensitivity is high astile subject is dark. Noise can be reduced by: • Using flash • Specifying a lower ISO sensitivity setting • Tile flash mode setting is set to _ (off). • Flash window is blocked. • Subject is beyond flash range. • Adjust exposure compensation. • Increase tile ISOsensitivity. • Subject is backlit. Select Backlighting scene mode or set tile flash mode setting to _ (fill flash). Adjust exposure compensation. 42, 43 38, _ 52 SO 38,_ 57 64 89, _ 87 3, 26 89, _ 86 _5 3s,_s9 54 38, _ 56 26 54 59 38, _'_ 56 46, 54 59 _10

red eye reduction). Skin tones are not softened. Saving images takes time. A ring-shaped belt or rainbow colored stripe appears in the monitor or images. Cause/Solution <........ When taking pictures with 2@ (auto with red eye reduction) or fill flash with slow sync and red eye reduction in Night portrait scene mode, In-Camera Red Eye Fix may be applied to areas not affected by red-eye. Use any scene mode other than Night portrait, and change the flash mode to any setting other than 2@ auto with red-eye reduction) and try taking a picture again. • Under some shooting conditions, facial skin tones may not be softened. • Select Skin softening for Glamour retouch in tile retouch menu for pictures containing four or more faces. It may take more time to save images in the following situations. • When the noise reduction function is in operation. • When flash mode is set to 2@ (auto with red eye reduction). • When shooting in Backlighting scene mode (when HDR is set to On). • When the skin softening function is applied while shooting. When shooting with bacHighting or when a very strong light source (such as sunlight) is in the frame, a ring shaped belt or rainbow- colored stripe (ghosting) may occur. Change the _osition of the light source, or frame the picture so that the light source does not enter the frame and try again. File cannot be played back. Cannot zoom in on picture. Cause!Solution "_........... • File or folder was overwritten or renamed by computer or other make of camera. • The COOLPIX $100 is not able to playback movies recorded with another make or model of digital camera. • Pictures taken with cameras other than COOLPIX $100 may not be enlarged. • 3D pictures cannot be enlarged when the camera is connected via HDMI and they are played back in 3D. • Playbackzoom cannot be used with movies, small pictures, or pictures that have been cropped to a size of 640 x 360 or smaller. 8_ 43, 55 67 73,_ 31 55 46 42, 43, 52 49 £- z o

voice memo. Cannot edit pictures. Pictures not displayed on television. Album icon restored to default settings, or pictures added to album not displayed in favorite pictures mode. The recorded pictures are not displayed in auto sort mode. Nikon Transfer 2 does not start when camera is connected. Cause/Solution • Voice memos cannot be attached to movies. • Voice memos cannot be attached to pictures taken with other cameras. Voice memos attached to pictures using another camera cannot be played back on this camera. • These options cannot be used with movies. Select pictures that support editing functions. • Pictures taken with another make or model of camera cannot be edited. • Pictures edited with this camera may not be displayed correctly on other cameras and cannot be transferred to computers from other cameras. • Select the correct Video mode and HDMI options from the TV settings item. • Both HDMI cable and audio/video cable or USBcable are connected to the camera. • Memory card contains no pictures. Replace memory card. Remove memory card to play back pictures recorded in the internal memory. Data in the memory card may not be played back correctly if overwritten by a computer. • The desired picture was sorted to a category other than the category currently displayed. • Pictures recorded by a camera other than the COOLPIX 5100 and pictures copied using the Copy option cannot be displayed in auto sort mode. • Pictures recorded in the internal memory or on the memory card may not be played back correctly if overwritten by a computer. • Up to ggg pictures or movies in total can be added to each category. If the desired category already contains ggg pictures or movies in total, new pictures or movies cannot be added. • Camera isoff. • Battery isexhausted. • USBcable is not correctly connected. • Confirm the compatible operating systems. • Camera is not recognized by the computer. • Refer to help information contained in ViewNX 2. i_72 i86 i_20 2O 2O 89, _ 91 75, _ 35 18 21 16,20 78 76 78 79 _712

screen is not displayed when the camera is connected to a printer. Pictures to be printed are not displayed. Cannot select paper size with camera. Edge of printed picture is cropped. Cannot print panoramas. With some PictBridge-compatible printers, the PictBridge startup screen may not be displayed and it may be impossible to print pictures when Auto isselected for the Charge by computer option in the setup menu. Set the Charge by computer option to Off and reconnect the camera to the printer. Memory card contains no pictures. Replace tile memory card. • Remove the memory card to print pictures from the internal memory. • Pictures created in Draw scene mode or pictures taken in 3D photography scene mode cannot be printed. Paper size cannot be selected from the camera in the following situations, even when printing from a PictBridge

] 6.79 m@ion 5× optical zoom, N[KKOR lens S.0 25.Omm (angle of view equivalent to that of 28 140 mm lens in 3Smm [135] format) f/3.g 4.8 12 elements in 10 groups (including 2 ED lens elements) Up to 4x (angle of view equivalent to that of approx. 560 mm lens in 35mm [135] format) Combination of lens shift and electronic VR (still pictures) Lens shift (movies) Contrast dete_tAF Focusrange •Approx. 50cm(1 ftSin.)to4(W);approx. 1 rn(3ft4in.)to-,- £0 '} (from lens) • Macro mode: 1 cm (0.4 in.) (at a wide angle zoom position beyond D) to _*" Focus-area selection Face priority, Auto (9 area automatic selection), center, manual (focus area can be selected using the touch panel), subject tracking 8.7 cm (3Sdn.), widescreen, OLED (touch panel) with anti reflection coating, approx. 820bdot, 5devel brightness adjustment Frame coverage Approx. 98% horizontal and 98% vertical (compared to actual (shooting mode)picture) Erame coverage Approx. 100% horizontal and 100% vertical (compared to (playback mode) actual picture) Media • Internal memory (approx. 71 MB) • SD/SDHC/SDXC memory card File system DCF, Exif 2.3, DPOF, MPF compliant File formats Still pictures: JPEG 3D pictures: MPO Sound files (Voice Memo): WAY Movies: MOV (video: H.264/MPEG 4 AVC, audio: AAC stereo) • 16M (high image quality/[4608 × 3456_] • 16M [4608×3456] • 12M [4000 x 300@ • 8M [3264 × 2448] • SM [2592 × 1944] • 3M [2048 × 1536] • PC [1024 x 768] • VGA [640 × 480] 16:9 [4608 x 2592]

Metering E=_osu recont_ol _Ape :s f_ti _r iiiii , ,; 0soSensitivity: A.to) Flash control DataT_ansfe_ P_otocol Specifications • ISO 12S, 200, 400, 800, 1600, 3200 • Auto (auto gain from ISO 12S to 800) • Fixed range auto (ISO 125 to 400) 256 segment matrix, center-weighted (digital zoom less than 2x), spot (digital zoom 2x or more) Programmed auto exposure with motion detection and exposure compensation ( 2.0 to +2.0 EV in steps of 1/3 EV) Mechanical and CMOS electronic shutter 1/1500 1 s,4 s (Fireworks show scene mode) Electronically-controlled ND filter ( 2.0 AV) insertion 2 steps (f/3.g and f/7.8 [W]) Can be selected from 10 and 2 second durations [W]: 0.3 to 3.5 m (1 ft to 11 ft) [T]: 0.5 to 2.2 m (1 ft 8 in. to 7 ft 2 in.) 7L auto flash with monitor preflashes Hi Speed USB MTP, PTP Can be selected from NTSCand PAL Can be selected from Auto, 480p, 720p, and 10801 Audio video output/digital I/0 (USB) HDMI mini connector (Type C) (HDMI output) Arabic, Chinese (Simplified and Traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hindi, Hungarian, Indonesian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese (European and Brazilian), Romanian, Russian, Spanish, Swedish, Thai, Turkish, Ukrainian, Vietnamese One Rechargeable Li ion Battery EN EL19 (included) AC Adapter EH-62G (available separately) Approx. 3 hours and 15 minutes (with Charging AC Adapter EH 69P when battery is fully discharged) Still pictures_: Approx. 150 shots Movies: Approx. SS min (HD 1080p_(1 g20x1080)). (Each movie is limited to a file size of 4 GB and a movie length of 29 minutes, even when there is sufficient free space on the memory card for longer recording.) £- z o o_ _715

projections) Approx. 138 g (4.9 oz)(including battery and SD memory card) / Temperature o°cto40°C132°F to 304°F/ ]:], Humidity Less than 85% (no condensation) • Unless otherwise stated, all figures are for a camera with a fully charged Recha rgeable Li ion Battery EN EL19 operated at an ambient temperature of 25°C (77°F). Based on Camera and Imaging Products Association (CIPA) standards for measuring the life of camera batteries. Measured at 23 (+2) °C (73 (+4) °F);zoom adjusted with each shot, flash fired with every other shot, image mode set to _ 4608x2592. Battery life may vary depending upon shooting interval and length of time menus and images are displayed. Rechargeable Li-ion Battery EN-EL19 _ Rechargeable lithium ion battery DC 3.7 V, 700 mAh oocto40oc (32oF to 04oF) Approx. 31.5 x 39.5 x 6 mm (1.3 × 1.6 x 0.3 in.) (excluding projections) _ Approx. 14 g (O.Soz) (excluding battery case) Charging AC Adapter EH-69P AC 100 240V,50/60 Hz,0.068 0.042 A _iii_@i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!! DC 5.0 V, 550 mA 0°C to 40°C (32°F to 104°F) Approx. 55 × 22 × 54 mm (2.2 x 0.9 × 2.2 in.) (excluding plug adapter) For Argentina: Approx. 55 × 59 x 63 mm (2.2 x 2.4 × 2.5 in.) For Brazil and Korea: Approx. 55 x 59 x 66.5 mm (2.2 x 2.4 x 2.7 in.) Approx. 55 g (2.0 oz) (excluding plug adapter) For Argentina, Brazil, and Korea: Approx. 80 g (2.9 oz) Specifications Nikon will not be held liable for any errors this manual may contain, The appearance of this product and its specifications are subject to change without notice. _:-76

camera industry to ensure compatibility among different makes of camera. • DPOF: Digital Print Order Format is an industry wide standard that allows pictures to be printed from print orders stored on memory cards. • Exifversion 2.3: This camera supports Exchangeable Image File Format for Digital Still Cameras (Exit)version 2.3 for digital still cameras, a standard that allows information stored with photographs to be used for optimal color reproduction when images are output from Exificompliant printers. • PictBridge: A standard developed cooperatively by the digital camera and printer industries, allowing photographs to be output directly to a printer without connecting the camera to a computer. £- z o o_ _17

3D3D playback mode 70, _9 V Setup menu 88 I_ (telephoto) 27 (wide-angle) 27 Playback zoom 31 Thumbnail playback 31 MENU Menu tab 11 [] Exit icon 11 [] Return icon 12 &F_J&IP=IL 6,_,_7 Numerics 3D photography 3D 49, _8 3D pictures 49, _8, _98 3D playback mode 70, _9 A AC adapter 17, _99 AF-assist illuminator 2, 29, _86 Album 70, _13 Adding images to 73, _10 Removing images from 73, _ 12 Aperture 28 Audio/video cable ii, 75, _35 Audio-in/Video-in jack _35 Auto flash 55 Auto mode 37 Auto off 89, _88 Auto sort mode 70, _14 Autofocus 29, _77 Autofocus mode _77 B Backlighting t] 46 Battery ii, 14, 16, 23 Battery charger 17, _99 Battery latch 3 Battery level 20 Battery-chamber 3 Battery-chamber/memory card slot cover 2,14,18 Beach _ 43 Best Shot Selector 45, _57 Black and white copy [] 45 Blink warning 90, _93 Brightness 88, _83 BSS 38, 45, _57 Button sound _87 C Charge by computer 90, _92 Charging AC Adapter ii, 16, _99 Choose key picture 74, _17, _74 Close-up _ 44 Cloudy _59 Connector cover 3 Continuous 38, _57 Copy 73, _73 Crop 31, _34 D Date and time 22, 88, _80 Date counter _85 Date format 22, _80 Daylight _'659 Daylight saving time 23, _81 Delete 32, _19, _72 Digital zoom 27, _86 Direct print _38 _._18

printing _!-_43 Drag 4 Drag and drop4 Draw ,_ 46, _!-_2 Dusk/dawn ii 44 Z Easy panorama 47, _!-_3 Easy panorama playback 47, _!-_5 EH-69P 16 EN-ELI9 ii, 14, 16 Exposure compensation 59 Extension _98 Eyelet for camera strap 2 F Face detection 26, 65 Favorite pictures mode 70, _!-_10 File names _!-_98 Fill flash 55 Filter effects 73, _29 Fireworks show {:_._45 Firmware version 90, _97 Fixed range auto _56 Flash 2, 54 Flash mode 54 Flash off 55 Fluorescent _59 Focus 28 area 6, 28, 65 Focus lock 39 indicator 28 Folder name _98 Food _145 Format 18, 89, _'_89 Format memory card ] 8, 89, _!-_89 Formatting internal memory 89, _!-_89 Full-flame playback 30 Full-time AF 85, _,77 __G Glamour retouch 73, _,31 _H HDM175, 89, _91 HDMI cable 75, _9, _36 HDMI device control 89, _'_91 Help 40 HS movie 85, _'_44 _1 identifier _'_98 image mode 62 image review 88, _'_83 image size 62 imprinting date and time _'_84 incandescent _'_59 internal memory 19 internal memory indicator 6, 8, 20, 82 ISO sensitivity 38, _'_56 J JPG _!m_,98 L Landscape [] 42 Language 89, _'_90 Lens 2, @:14 List by date mode 70, _'_16 M Macro mode 58 Maximum movie length 84 Memory capacity 63 Memory card ] 8, ] 9 Memory card slot 3, 18 Microphone (stereo) 2 Monitor 3, 6, _):-5 Monitor settings 88, _83 MOV _!-_98 Movie editing 86, _!-_47 Movie menu 85, _!-_75 9- z o D_ _19

Number of exposures remaining 63 Open with HS footage 85, _44, _77 Optional accessories _99 p Paint 73, _22 Panorama assist 47, _6 Panorama Maker 5 77, _!-_7 Panorama _;_ 47 Paper size _40, _41 Party/indoor _,,_43 Perspective control 73, _28 Pet portrait auto release 48 Pet portrait °_ 48 Photo info _83 PictBridge 75, _38, _):17 Playback 70, 86, _72 Playback menu 73, _62 Playback mode 10, 30, 70 Playback zoom 31 Portrait _ 42 Power 20, 22 Power switch (slide cover) 2, 20, 21 Power-on lamp 2, 17, 21, _93 Press halfway 28 Print 75, _40, _41, _66 Print date 88, _84 Print order 73, _66 Printer 75, _38 Protect 73, _64 Q Quick retouch 73, _25 R Rechargeable battery _99 Rechargeable Li-ion battery ii, 14, 16, _99 Record orientation _88 Recording movies 82 Recording slow motion movies 85, _44 Red-eye reduction SS Reset all 90, _95 Rotate image 73, _70 S Scene mode 40, 42 Self-timer 56 Self4imer lamp 2, 51,57 Sequence display options 90, _!_)17, _94 Setup menu 88 Shooting 24, 26, 28 Shooting menu 38, _49 Shooting mode 10, 25 Shutter sound _87 Shutter speed 28 Shutter-release button 2, 28 Single 38, _57 Single AF 85, _77 Slide cover (power switch) 2, 20, 21 Slide show 73, _62 Slow Sync SS Small picture 73, _!-_33 Smart portrait menu 52, _61 Snow [] 43 Sound settings 89, _!'_87 Speaker 3 Sports _ 42 Strap 3 _720

Touch AF/AE 38, _54 Touch shooting _50, _52, _54 Touch shutter 38, _650 Tripod socket 3 TV settings 89, _91 u_ USB cable ii, 75, 78, _39 USB/audio/video output connector 3, 16, 75, _35, _39 v_ Vibration reduction 89, _85 Video mode 89, _91 ViewNX 2 75, 76 Voice memo 73, _71 Volume 86, _72 w WAV _98 Welcome screen 88, _79 White balance 38, _59 Wide-angle zoom 27 Wind Noise Reduction 85, _78 Index 2- z o o_ _721

in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. NIKON CORPORATION © 2011 Nikon Corporation YP1G02(11) 6MM 13111-02