Liebherr UIK1424 Series Operating Instructions Manual

131113 7086070 - 00 UIK1620/ UIK1424 ... 3

2 1.1 Description of appliance and equipment.................. 2 1.2 Range of appliance use............................................ 2 1.3 Conformity................................................................ 3 1.4 Saving energy.......................................................... 3 2 General safety information................................... 3 3 Controls and displays........................................... 4 3.1 Operating and control elements............................... 4 3.2 Temperature display................................................. 4 4 Putting into operation............................................ 4 4.1 Transporting the appliance....................................... 4 4.2 Installing the appliance............................................. 4 4.3 Disposing of packaging............................................ 5 4.4 Connecting the appliance......................................... 5 4.5 Switching on the appliance....................................... 5 5 Control.................................................................... 5 5.1 Refrigerator compartment........................................ 5 5.2 Freezer compartment............................................... 6 6 Maintenance........................................................... 7 6.1 Defrosting................................................................. 7 6.2 Cleaning the appliance............................................. 7 6.3 Replacing the interior illumination with LED lamp..... 7 6.4 Customer service..................................................... 8 7 Malfunction............................................................. 8 8 Decommissioning.................................................. 9 8.1 Switching off the appliance....................................... 9 8.2 Taking the appliance out of service.......................... 9 9 Disposing of the appliance................................... 9 The manufacturer works constantly on the further development of all the types and models. Therefore please understand that we have to reserve the right to make design, equipment and technical modifications. To get to know all the benefits of your new appliance, please read the information contained in these instructions carefully. The instructions apply to several models. Differences may occur. Text relating only to specific appliances is marked with an asterisk (*). Instructions for action are marked with a , the results of action are marked with a . 1 Appliance at a glance 1.1 Description of appliance and equip- ment Note u Place food inside the appliance as shown in the diagram. This allows the appliance to save energy during operation. u Shelves, drawers and baskets are arranged for optimum energy efficiency on delivery. Fig. 1 (1) Operating panel (8) LED interior light (2) Freezer compartment* (9) Coldest zone (3) Butter and cheese tray (10)Vegetable bin (4) Bottle rack* (11)Height-adjustable feet, front and back (5) Bottle holder* (12)Water drain (6) Shelf, sectioned (13)Type plate (7) Shelf, relocatable 1.2 Range of appliance use The appliance is suitable solely for cooling food in a domestic environment or similar. This includes use in, for example - in staff kitchenettes, bed and breakfast estab- lishments, - by guests in country homes, hotels, motels and other forms of accommodation, - in catering and similar services in the whole- sale trade Use the appliance solely as is customary within a domestic environment. All other types of use are inadmissible. The appliance is not suitable for storing and cooling medicines, blood plasma, laboratory preparations or similar substances and products covered by the 2007/47/EC Medical Devices Directive. Misuse of the appliance can result in the stored prod- ucts suffering harm or perishing. Furthermore, the appliance is not suitable for operation in potentially explosive atmospheres. The appliance is suitable for integrated, under- worktop use. The appliance is set to operate within specific ambient temperature limits according to its climate rating. The correct climate rating for your appliance is indicated on the type plate. Appliance at a glance 2 * Depending on model and options

indicated is required, otherwise the cooling performance is reduced. Climate rating for ambient temperatures of SN 10 °C to 32 °C N 16 °C to 32 °C ST 16 °C to 38 °C T 16 °C to 43 °C 1.3 Conformity The refrigerant circuit is tested for leakage. When built-in the appliance complies with the relevant safety regulations and EC Directives 2006/95/EC, 2004/108/EC, 2009/125/EC and 2010/30/EU. Note for test institutions: Tests are to be carried out according to the applicable standards and guidelines. Preparation and testing of the appliances must be carried out taking the manufacturer's loading plans and the notes in the operating manual into account. 1.4 Saving energy - Always ensure good ventilation. Do not cover ventilation openings or grille. - Do not place appliance in areas of direct sunlight or next to a stove, heater or similar object. - The energy consumption depends on the installation condi- tions, e.g. the ambient temperature (see 1.2) . - Keep the time the appliance is open to a minimum. - The lower the temperature setting, the higher the power consumption. - Store food logically. (see Appliance at a glance). - Ensure that all food is well packed and covered for storage. This will prevent frost from forming. - Remove food as needed in order that it does not warm too much. - First cool warm food to room temperature before storing it . - Defrost frozen food in the refrigerator.* - If there is a thick layer of frost in the appliance: defrost the appliance.* 2 General safety information Danger for the user: - This appliance can be used by children of 8 years old and over, and also by persons with restricted physical, sensory or mental capacity or lack of experience and knowl- edge, if they are supervised or have been instructed on safe use of the appliance and understand the resulting risks. Children must not be allowed to play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision. - When disconnecting the appliance from the supply, always take hold of the plug. Do not pull the cable. - In the event of a fault pull out the mains plug or deactivate the fuse. - Do not damage the mains power cable. Do not operate the appliance with a defective mains power cable. - Have any repairs to or intervention in the appliance, and any change of the mains power cable, carried out by the customer service only or by other specialised personnel trained for the purpose. - Only install, connect and dispose of the appli- ance according to the instructions. - Only use the appliance when it is installed. - Please keep these instructions in a safe place and pass them on to any subsequent owners. - Special-purpose lamps (incandescent lamps, LEDs, fluorescent tubes) in the appliance serve to illuminate the appliance interior and are not suited for room illumination. Fire hazard: - The refrigerant R 600a is environmentally friendly but flammable. Escaping refrigerant may ignite. • Do not damage the refrigerant circuit pipes. • Do not allow naked flames or ignition sources to enter the appliance. • Do not use any electrical appliances in the interior (e.g. steam cleaners, heaters, ice cream maker etc.). • If refrigerant escapes: remove any naked flames or sources of ignition from the leakage area. Ventilate the room well. Notify the after-sales service. - Do not store explosives or sprays using combustible propellants such as butane, propane, pentane, etc. in the appliance. To identify these spray cans, look for the list of contents printed on the can, or a flame symbol. Gases possibly escaping may ignite due to electrical components. - Please be sure to store alcoholic drinks or other packaging containing alcohol in tightly closed containers. Any alcohol that leaks out may be ignited by electrical components. Danger of tipping and falling: - Do not misuse the plinth, drawers, doors etc. as a step or for support. This applies particu- larly to children. Danger of food poisoning: - Do not consume food which has been stored too long. Danger of frostbite, numbness and pain: - Avoid lasting skin contact with cold surfaces or refrigerated/frozen food or take protective General safety information * Depending on model and options 3

cream, water ice or ice cubes immediately and do not consume them too cold. Danger of injury and damage: - Hot steam can lead to injury. Do not use elec- trical heating or steam cleaning equipment, open flames or defrosting sprays to defrost. - Do not use sharp implements to remove the ice. Risk of crushing* - Do not reach into the soft stop mechanism. Fingers may be trapped when the door is closed.* Please observe the specific information in the other sections: DANGER identifies a situation involving direct danger which, if not obviated, may result in death or severe bodily injury. WARNING identifies a dangerous situation which, if not obviated, may result in death or severe bodily injury. CAUTION identifies a dangerous situation which, if not obviated, may result in minor or medium bodily injury. NOTICE identifies a dangerous situation which, if not obviated, may result in damage to property. Note identifies useful information and tips. 3 Controls and displays 3.1 Operating and control elements Fig. 2 (1) On/Off button (3) Temperature display (2) Setting button (4) SuperCool button 3.2 Temperature display The following are displayed in normal operation: - the set cooling temperature 4 Putting into operation 4.1 Transporting the appliance CAUTION Risk of injury and danger of damage as a result of incorrect transport! u Transport the appliance in a packed condition. u Transport the appliance upright. u Do not transport the appliance without assistance. 4.2 Installing the appliance WARNING Risk of fire due to short circuit! If the mains cable/connector of the appliance or of another appliance touch the rear of the appliance, the mains cable/ connector may be damaged by the appliance vibrations, leading to a short circuit. u Stand the appliance so that it is not touched by connectors or main cables. u Do not plug the appliance or any others into sockets located near the rear of the appliance. WARNING Fire hazard due to dampness! If live parts or the mains lead become damp this may cause short circuits. u The appliance is designed for use in enclosed areas. Do not operate the appliance outdoors or in areas where it is exposed to splash water or damp conditions. u Only use the appliance when it is installed. WARNING Fire hazard due to refrigerant! The refrigerant R 600a is environmentally friendly but flam- mable. Escaping refrigerant may ignite. u Do not damage the piping of the refrigeration circuit. WARNING Fire hazard and danger of damage! u Do not place appliances emitting heat e.g. microwaves, toasters etc. on the appliance! WARNING Blocked ventilation openings pose a risk of fire and damage! u Always keep the ventilation openings clear. Always ensure that the appliance is properly ventilated! q In the event that the appliance is damaged, contact the supplier immediately before connecting to the mains. q The floor at the site must be flat and level. q Do not install the appliance in a location where it is exposed to direct radiation of the sun, next to a cooker, heater and similar. q The appliance is suitable for integrated, under-worktop use. q Ventilation is effected by way of the plinth. q Do not install the appliance without assistance. Controls and displays 4 * Depending on model and options

your appliance must have a volume of 1 m2 per 8 g of R 600a refrigerant used in the appliance. If the room in which the appliance is installed is too small, a flammable gas-air mixture may form in the event of a leakage in the refrigera- tion circuit. The quantity of refrigerant used in your appliance is indicated on the type plate on the inside of the appliance. u Detach the connecting cable from the rear of the appliance, removing the cable holder at the same time because other- wise there will be vibratory noise! After installation: u Remove the protective film from the decorative trims. u Remove all transit supports. u Unscrew the red transport lock. Close the vacated retaining hole using the stopper (60). u Dispose of packaging material (see 4.3) . For Side-by-Side installation, freezer and refrigerator side by side: u Always install the freezer on the right of the refrigerator, as seen from the front. w No condensate forms between the appliances thanks to the side wall heating system foamed in on the left. Note u Clean the appliance (see 6.2) . If the appliance is installed in a very damp environment, condensate may form on the outside of the appliance. u Always see to good ventilation at the installation site. 4.3 Disposing of packaging WARNING Danger of suffocation due to packing material and plastic film! u Do not allow children to play with packing material. The packaging is made of recyclable materials: - corrugated board/cardboard - expanded polystyrene parts - polythene bags and sheets - polypropylene straps - nailed wooden frame with polyethylene panel* u Take the packaging material to an official collecting point. 4.4 Connecting the appliance NOTICE Risk of damage to the electronic control system! u Do not use stand-alone inverters (conversion of d.c. to a.c./ three-phase) or energy saving plugs. WARNING Fire and overheating hazard! u Do not use extension cables or multiple socket outlets. The type of current (alternating current) and voltage at the installation site have to conform with the data on the type plate (see Appliance at a glance). The socket must be properly earthed and fused. The tripping current for the fuse must be between 10 A and 16 A. The socket must be easily accessible so that the appliance can be quickly disconnected from the supply in an emergency. It must be outside the area of the rear of the appliance. u Check the electrical connection. u Plug in the power plug. 4.5 Switching on the appliance u Open the door. u Press On/Off button Fig. 2 (1). w The appliance is switched on. The temperature display indi- cates the set temperature. w If all LEDs in the temperature display light up, demo mode is activated. Please contact the after sales service. 5 Control 5.1 Refrigerator compartment The natural circulation of air in the refrigerator compartment results in zones differing in temperature. It is coldest directly above the vegetable drawers and at the rear wall. It is warmest at the top front of the compartment and in the door. 5.1.1 Food refrigeration u Store perishable food such as ready-to-serve dishes, meat products and sausages in the coldest zone. Place butter and preserves in the upper area and in the door (see Appli- ance at a glance). u Use recyclable plastic, metal, aluminium and glass containers and cling film for wrapping. u Do not store food too close together to enable good air circulation. u To safeguard bottles from tipping over: move the bottle holder. 5.1.2 Setting the temperature The temperature depends on the following factors: - the door opening frequency - the room temperature at the site where the appliance is installed - the type, temperature and quantity of frozen food Temperature setting to be recommended: 5 °C An average temperature of approx. –18 °C is then established in the freezer compartment. The temperature can be changed continuously. Once the 1 °C setting is reached, it starts again with 9 °C. u To access temperature adjustment: press the setting button Fig. 2 (2) once. w The LED of the current temperature flashes in the tempera- ture display. u Press the setting button Fig. 2 (2) the number of times needed until the required temperature shines in the LED display. Note u Long pressing of the setting button sets a slightly colder value within a small temperature range (e.g.: between 5 °C and 7 °C). The LED of the next lower temperature range then shines in the temperature display. 5.1.3 SuperCool With SuperCool you switch to the highest cooling performance to reach lower cooling temperatures. Use SuperCool, to rapidly cool large amounts of food. Control * Depending on model and options 5

operates with maximum refrigeration. The noise of the refriger- ation unit may be temporarily louder as a result. The SuperCool function uses slightly more energy. Cooling with SuperCool u Briefly press SuperCool button Fig. 2 (4). w The SuperCool button Fig. 2 (4) lights up. w The cooling temperature drops to the coldest value. Super- Cool is activated. w SuperCool is automatically deactivated after 6 to12 hours The appliance continues to operate in the energy-saving, normal mode. To prematurely deactivate SuperCool u Briefly press SuperCool button Fig. 2 (4). w The SuperCool button Fig. 2 (4) goes out. w SuperCool is deactivated. 5.1.4 Shelves Relocating the shelves The shelves have stops preventing them from being uninten- tionally pulled out. u Lift the shelf and draw it out forwards. 5.1.5 Using the sectioned shelf u Slide the sectioned shelf under, as shown in the illustration. 5.1.6 Door racks Removing the storage rack u Remove storage rack according to illustration. Dismantling door racks u The door racks can be dismantled for cleaning. 5.1.7 Removing the bottle holder u Remove the bottle holder according to the illustration.* 5.2 Freezer compartment* You can store frozen food for several months, make ice cubes and freeze fresh food in the freezer compartment at a tempera- ture of -18 °C and lower. The air temperature in the compartment, measured by ther- mometer or other instruments, may fluctuate. 5.2.1 Freezing food* 2 kg fresh food/24 h is the maximum weight which can be frozen. CAUTION Risk of injury due to broken glass! Bottles and cans containing drinks may burst when being frozen. This applies particularly to sparkling drinks. u Do not freeze bottles and cans containing drinks! u 24 h before freezing food, set the temperature to a medium to cold position. In order that the food is rapidly frozen through to the core, do not exceed the following quantities per pack: - Fruit, vegetables up to 1 kg - Meat up to 2.5 kg u Pack the food in portions in freezer bags, reusable plastic, metal or aluminium containers. u Set the temperature back again 24 h after placing the food inside. 5.2.2 Storage times* Guide times for storing various types of food in the freezer compartment: Ice cream 2 to 6 months Sausage, ham 2 to 6 months Bread, bakery products 2 to 6 months Game, pork 6 to 10 months Fish, fatty 2 to 6 months Fish, lean 6 to 12 months Cheese 2 to 6 months Poultry, beef 6 to 12 months Vegetables, fruit 6 to 12 months Storage times given are guide times. 5.2.3 Thawing food* - in the refrigerator compartment Control 6 * Depending on model and options

- in a microwave oven - in a conventional or fan oven u Food once thawed should be re-frozen only in exceptional cases. 6 Maintenance 6.1 Defrosting 6.1.1 Defrosting refrigerator compartment The refrigerator compartment is defrosted automatically. The water evaporates. Drops of water on the rear wall are function- ally conditioned and perfectly normal. u Clean the drain hole at regular intervals to allow the defrost water to drain (see 6.2) . 6.1.2 Defrosting freezer compartment* A layer of frost and ice forms in the freezer compartment after the appliance has been in use for a lengthy period of time. This is quite normal. The layer of frost and ice forms more quickly if the door is opened frequently or if the food is warm when placed inside. However, a thick layer of ice will increase the appliance‘s energy consumption. You should therefore defrost the appliance regularly. CAUTION Risk of injury and damage as a result of hot steam! u Do not use electric heaters or steam cleaners, naked flames or defrosting sprays for defrosting. u Do not remove ice using sharp instruments. u Switch off the appliance. u Pull out the plug. u Wrap the frozen food in newspaper or blankets and store in a cool place. u Leave the compartment and appliance door open during defrosting. u Remove detached pieces of ice. u Pay attention that the defrost water does not run into the kitchen unit. u If necessary, pick up defrost water several times, using a sponge or cloth. u Clean the compartment (see 6.2) . 6.2 Cleaning the appliance WARNING Risk of injury and damage as a result of hot steam! Hot steam can lead to burns and can damage the surfaces. u Do not use any steam cleaners! NOTICE Incorrect cleaning damages the appliance! u Do not use cleaning agents in concentrated form. u Do not use any scouring or abrasive sponges or steel wool. u Please do not use any aggressive, scouring, sand-, chloride-, chemical- or acid-based cleaning agents. u Do not use chemical solvents. u Do not damage or remove the type plate on the inside of the appliance. It is important for the customer service. u Do not pull off, bend or damage cables or other compo- nents. u Do not allow any cleaning water to enter the drain channel, ventilation grille or electrical parts. u Please use soft cleaning cloths and a universal pH-neutral cleaning agent. u Please use cleaning and care products suitable for contact with foodstuffs in the appliance interior. u Empty appliance. u Pull out the power plug. u Clean the vent grille regularly. w Dust deposits increase energy consumption. u Clean plastic outer and inner surfaces with lukewarm water and a little washing-up liquid. u Clean drain hole: Remove deposits with a narrow instrument, e.g. a cotton bud. u Most of the parts can be dismantled for cleaning: see the relevant chapter. u Clean items of equipment by hand with lukewarm water and a little washing-up liquid. After cleaning: u Wipe dry the appliance and items of equipment. u Connect the appliance and switch it on again. u Put the food back inside. 6.3 Replacing the interior illumination with LED lamp In the device, an LED lamp is used as standard illumination for the interior space. When an incandescent bulb is used: q Use an incandescent lamp with max. 25 W and E14 socket. q Power supply (AC) and voltage at the operating point must comply with the details on the rating plate (see Appliance at a glance). When a LED is used: q Use only the original LED lamp from the manufacturer. The lamp can be obtained through customer service or a specialist dealer (see 6.4) . WARNING Risk of injury from LED light! The light intensity of the LED lighting corresponds to laser class 1/1M. If the cover is removed: u Do not look directly into the light at close quarters through optical lenses. Doing so may damage your eyes. Maintenance * Depending on model and options 7

If different LED lights are used, there is a danger of overheating or fire. u Use the manufacturer's original LED light. u Switch off the appliance. u Pull out the mains plug or switch off/unscrew the fuse. u Take hold of the lamp cover at the top and bottom Fig. 3 (1). u Disengage the lamp cover at the back and detach it Fig. 3 (2). u Replace the lamp Fig. 3 (3). u Clip the back end of the cover in and clip the sides into place. Fig. 3 6.4 Customer service First check whether you can correct the fault yourself by refer- ence to the list (see Malfunction). If this is not the case, please contact the customer service whose address is given in the enclosed customer service list. WARNING Risk of injury if repair work is not carried out professionally! u Have any repairs and action - not expressly specified - on the appliance and mains cable carried out by service personnel only. (see Maintenance) u Read the appliance designation Fig. 4 (1), service No. Fig. 4 (2) and serial No. Fig. 4 (3) off the type plate located inside the appliance on the left- hand side. Fig. 4 u Notify the customer service, specifying the fault, appliance designation Fig. 4 (1), service No. Fig. 4 (2) and serial No. Fig. 4 (3). w This will help us to provide you with a faster and more accu- rate service. u Keep the appliance closed until the customer service arrives. w The food will stay cool longer. u Pull out the mains plug (not by pulling the connecting cable) or switch off the fuse. 7 Malfunction Your appliance is designed and manufactured for a long life span and reliable operation. If a malfunction nonetheless occurs during operation, check whether it is due to a handling error. In this case you will have to be charged for the costs incurred, even during the warranty period. You may be able to rectify the following faults yourself: Appliance does not work. → The appliance is not switched on. u Switch on the appliance. → The power plug is not properly inserted in the wall socket. u Check power plug. → The fuse of the wall socket is not in order. u Check fuse. The compressor runs for a long time. → The compressor switches to a low speed when little cold is needed. Although the running time is increased as a result, energy is saved. u This is normal in energy-saving models. → SuperCool is activated. u The compressor runs for longer in order to rapidly cool the food. This is normal. A LED on the bottom rear of the appliance (at the compressor) flashes regularly every 15 seconds*. → The inverter is equipped with a diagnostic LED. u The flashing is normal. Excessive noise. → Due to the various speed steps, speed-regulated* compressors can generate different running noises. u The sound is normal. A bubbling and gurgling noise. → This noise comes from the refrigerant flowing in the refriger- ation circuit. u The sound is normal. A quiet clicking noise. → The noise is produced whenever the refrigeration unit (motor) automatically switches on or off. u The sound is normal. A hum. It is briefly a little louder when the refrigeration unit (the motor) switches on. → The refrigeration increases automatically when the Super- Cool function is activated, fresh food has just been placed in the appliance or the door has been left open for a while. u The sound is normal. → The ambient temperature is too high. u Solution: (see 1.2) Vibratory noise. → The appliance is not fixed to the ground. The running of the cooling unit therefore makes objects and adjacent furniture vibrate. u Check installation and reposition appliance as required. u Move bottles and containers apart. The outer surfaces of the appliance are warm*. → The heat of the refrigeration circuit is used to prevent condensate from forming. u This is normal. The temperature is not cold enough. → The door of the appliance is not properly closed. u Close the door of the appliance. → Insufficient ventilation. u Clear ventilation grilles. → The ambient temperature is too high. u Solution: (see 1.2) . → The appliance was opened too frequently or for too long. u Wait to see whether the appliance reaches the required temperature by itself. If not, please contact the after sales service (see Maintenance). → The appliance is too close to a source of heat (stove, heater etc). u Change the position of the appliance or the source of heat. The interior light is not on. → The appliance is not switched on. u Switch on the appliance. → The door was open longer than 15 min. Malfunction 8 * Depending on model and options

been open for about 15 min. → When the interior illumination does not work but the temper- ature display is lit, the illuminant (delivery with LED illumi- nant) is defective. WARNING Risk of injury from LED light! The light intensity of the LED lighting corresponds to laser class 1/1M. If the cover is removed: u Do not look directly into the light at close quarters through optical lenses. Doing so may damage your eyes. u Change the lighting (see Maintenance). 8 Decommissioning 8.1 Switching off the appliance u Press the On/Off button Fig. 2 (1) until the display goes dark. Release button. w If the appliance cannot be switched off, the child lock func- tion is active . 8.2 Taking the appliance out of service u Empty the appliance. u Pull out the power plug. u Clean the appliance (see 6.2) . u Leave the door open to prevent odour. 9 Disposing of the appliance The appliance contains some reusable materials and should be disposed of properly - not simply with unsorted household refuse. Appliances which are no longer needed must be disposed of in a professional and appropriate way, in accordance with the current local regulations and laws. When disposing of the appliance, ensure that the refrigeration circuit is not damaged to prevent uncontrolled escape of the refrigerant it contains (data on type plate) and oil. u Disable the appliance. u Pull out the plug. u Cut through the connecting cable. Decommissioning * Depending on model and options 9