Chamberlain LM800A-2 Technical Data Manual

mous wealth of experience. We have a wide range of solutions for a variety of garages all over the world. We place great emphasis on quality, innovative technology and comprehensive service not only to meet the expectations of our customers but to exceed them as well. Garage door openers are equipped with automatic power detection, easy to program limit switches, rolling code technology, an energy-saving transformer, quick-connect wire terminals, control with diagnostics, 1 light 230V/40W with 2.5 minutes light delay (other settings available), antenna, connectors for door-in-door switch and indicator light. These features guarantee easy installation. LiftMaster™ Garage Door Openers for the specialist offer reliable solutions, security and long life. The majority of LiftMaster garage door drives can be combined with different rails, so you choose the appro- priate solution from a wide range, whether chain or belt, whether standard length or up to 5 m. All rails are made of steel in a C-profile and are 30 mm high. Service & contact: We’ll be glad to answer your queries and consider your suggestions any time. Call phone no. +49 (0) 6838 90 71 72 or send an E-mail to [email protected] The service team in Saarwellingen looks forward to your call. Chamberlain GmbH Alfred-Nobel-Straße 4 D-66793 Saarwellingen www.liftmaster.eu HomeLink ® C O M P A T I B L E

LifTMASTER™ OPERATOR GENERAL SPECifiCATiONS Convenience/Safety Emergency quick release, Automatic trolley reconnect, Trolley disconnect mode setting Ventilation/pet opening, Safety stop and full reverse, Up: Safety stop, Automatic close (dependent on model), Flashing light connection (dependent on model), Door-in-door switch (dependent on model) General Door Linkage: Adjustable door arm (dependent on model), Logic Type: Solid-state microprocessor with built-in surge suppressor, Solid-state light delay (dependent on model) Force Adjustment: Segmented - Automatic learn, Length of line cord: 1.2 m (dependent on model) Temperature: -30 °C to +65 °C Digital Radio controls Logic boards feature the exclusive Smart Button for programming transmitter codes to receiver memory. RF Module: 433.92 MHz – AM Superheterodyne Rolling Code or Billion Code decoding Battery (Remote Control): 2 x 3 V or 1 x 3 V (94335E) Remote control may be programmed from operator or control panel. Remote control may be programmed to control the opener light. Remote control may be programmed to an open/close/stop function. 2.5 minutes light timing adjustable to 1.5, 2.5, 3.5, 4.5 minutes. Operator light may be programmed to turn on when IR beam is broken. In order to gurantee a smooth operation, we help you to diagnose in case of a failure. Through simple flashing signals you will know what to do quickly. Example: LM1000A-2, LM800A-2, LM60 1 flash: The Protector System™ open, misaligned or an object has broken IR beam for more than 4 seconds. 2 flashes: The Protector System™ wire shorted or connected backwards. 3 flashes: Door or wall control button wire shorted. 4 flashes: IR sensor slightly misaligned (dim or flashing sensor LED) or partially blocked. 5 flashes: No RPM in the first second of travel. Motor has stalled or the electronics did not see the RPM signal. The unit will stop or reverse in 1 second. 6 flashes: RPM caused a reversal (low force setting). 7 flashes: Bad logic board (Unplug and reconnect operator). 9 flashes: No passpoint detected during travel. Rapid flashing: Transmitter code being received. (Operator not necessarily programmed to respond) Install all operators to EN12453 and/or EN60335-95-2. LiftMaster™ operators meet or exceed all applicable EU re- gulations. All trolley operator impact forces, force sensing, door, weight, and size ratings have been tested and verified by TÜV-Rheinland. LiftMaster™ operators carry TÜV approval and CE marking. All operators are HomeLink compatible.

PREMiUM LiNE LM1000A-2 Low headroom bracket 5-Year Motor warranty | 2-Year full warranty TÜV-tested to meet EN12453. For doors up to 130 kg/13.5 m2 Wireless wall control 4-channel mini remote control

input Voltage 230–240 V AC, 50 Hz Max. Pull force 1,000 N Watts 190 W Stand-by power 3.0 W MOTOR Type 24 V DC gearmotor permanent lubrication DRiVE MECHANiSM Drive Chain/belt with two-piece trolley on steel rail Door height adjustable up to 2.3 m or up to 5 m with appropriate extension Travel rate 127–178 mm per second Lighting turns on when the drive is activated; turns off 2.5 minutes after closing Door arm adjustable, trolley unlocking device SAfETY Automatic stop by pressing a button during forward or backward run and obstacle detection Power recognition automatic Overflow protection Transformer overload protection and low voltage cabling for accessories Limit switch setting electronic, semi and fully automatic; optical detection of speed and door position DiMENSiONS Length (overall) 3.2 m Headroom required 30 mm Hanging weight 14.5 kg RECEiVER Memory Registers 64 frequency 433.92 MHz fURTHER fEATURES Soft-start and soft-stop, automatic close SPECiAL NOTE Chamberlain strongly recommends to install the protector system on all garage door openers! TECHNiCAL DATA 9A5102 LM1000A-2