Lightolier LPTC series Specification

Page 1 of 2 Job Information Type: Job Name: Cat. No.: Notes: Features Illumination: Emergency illumination is provided to designated fluorescent fixtures by transferring backup generator or inverter power to the AC ballast. The designated emergency fixture can be locally switched, and will provide full-rated light output when operating from emergency power. Housing: Housing and cover are constructed of 24 gauge galvanized steel. Low profile housing allows mounting in most low-profile fluorescent fixtures with low-profile AC ballast. Operating Temperature Range: 32°F (0°C) to 131°F (55°C) Electronics: 120/277 VAC dual input voltage with all inputs fused to 3 A. Electrical Specifications: (120/277 VAC) .27 mA, 1.48 W All inputs fused to 3 A Code Compliance UL 924 “Auxiliary Power and Lighting Equipment” listed. UL damp location listing standard. NFPA 101, NEC, BOCA, OSHA and IBC illumination standards. Warranty Five years full warranty. LPTC 1.17" (2.97 cm) 8.0" (20.32 cm) 1.1" (2.79 cm)

Page 2 of 2 Philips Lightolier e: [email protected] t: (508) 679-8131 w: www.lightolier.com LPTC Series August 11, 2011 Specifications are subject to change without notice. © Koninklijke Philips Electronics N.V., 2011. All rights reserved. Job Information Type: Ordering Information Series LPTC = Auxiliary Power Transfer Circuit LPTC Typical Wiring Diagram Shown with utility power present BLUE WALL SWITCH ORANGE BLACK WHITE RED WHITE/RED NORMAL POWER DIST. PANEL HOT N TRANSFER SWITCH HOT N AUXILIARY POWER AUXILIARY POWER EMER. POWER DIST. PANEL CONTROL MODULE AUXILIARY POWER TRANSFER UNIT BROWN WHT/BLK AC BALLAST HOT N 277 V 120 V N Shown with programmable circuit breakers (generator off-line) BLUE ORANGE BLACK WHITE RED WHITE/RED PROGRAMMABLE CIRCUIT BKR PANEL HOT N HOT N AUXILIARY POWER AUXILIARY POWER EMER. POWER DIST. PANEL CONTROL MODULE AUXILIARY POWER TRANSFER UNIT BROWN WHT/BLK AC BALLAST HOT N 277 V 120 V N