Linksys PSUS4 - PrintServer For USB Operation & User’s Manual

PrintServer for USB with 4-Port Switch If the modified program normally reads commands c. interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does ...

6. When the Bi-Admin is installed, the Setup Complete screen will appear. Click Finish to continue. Setup Complete Starting the Bi-Admin Management Utility 1. To start the Bi-Admin program, click Start, Programs, Print Server Utility, and then Bi-Admin Management Utility. If the Bi-Admin Management Utility icon has been created, you can double-click it instead. You can drag the shortcut icon onto your Desktop for easy access to the Bi-Admin Management Utility. When the Bi-Admin Management Utility appears, make 2. sure that ...

Internet Printing • Configuration > Internet Printing Tab Enter the address of your mail server in the Mail Server IP Address field. (This value must be a fixed IP address.) Next enter the mail account name in the Mail Account field and the password in the Password field. Enter the password again in the Confirm Password field. Then, enter the time interval for the PrintServer to check for e-mail to be printed, in hours and minutes in the Check Mail Interval: field. You may also specify an e-mail address to which mails t ...

InitDevice Option When you select InitDevice from the menu bar, these options are displayed: Reset Device • Restore to Factory Default • Attached Remote • Connected Protocol • If you click Attached Remote, the Attached Remote screen appears. To add a cross segment print server, enter the IP address in the fields, and click Set. Click Cancel to undo any changes. For more information, click Help. Attached Remote Diagnostic Option When you select Diagnostic from the menu bar, a diagnostic test page is sent to the ...

PrintServer for USB with 4-Port Switch If the modified program normally reads commands c. interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does ...

i PrintServer for USB with 4-Port Switch About This Guide Icon Descriptions While reading through the User Guide you may see various icons that call attention to specific items. Below is a description of these icons: NOTE: This check mark indicates that there is a note of interest and is something that you should pay special attention to while using the product. WARNING: This exclamation point indicates that there is a caution or warning and it is something that could damage your property or product. WEB: This globe icon indicates a noteworthy website address or e-mail address ...

7 PrintServer for USB with 4-Port Switch To create additional IPP ports, repeat the entire • procedure. The Proxy Server and other options are set individually • for each IPP Port. Changing the IPP Port Settings After the IPP port is created, you can reach the Configure IPP Port screen by performing these steps: 1. Open the Printers folder (click Start, click Settings, and then click Printers). 2. Right-click the IPP Printer and select Properties. 3. Click Port Settings or Configure Port (Details or Port tab, depending on your version of Windows). The ...

Device Information To choose a different device that you configured, click Open. You may then browse for your file, select it, then click Open. The contents of the file will display on the right- hand side of the screen. To save the file to the PrintServer, click Restore to Device. Printer Status This option allows you to view the printer status, and set port and printer parameters. If you click this option, a Verify Password screen will appear. Make sure that you enter the password in the field before you click OK. If an ...