Linn Kolektor Specification

controller ❙ High precision solid state switching and micro-processor control ❙ High density surface mount circuitry ensuring minimal, discrete signal paths ❙ Linn patented silent Switch Mode Power Supply ❙ Ten line inputs including high quality, low noise MM phono stage ❙ Four line outputs including tape ❙ Tone controls for subtle playback refinements to suit the listening room or type of music ❙ Full feature remote control ❙ Internal headphone amplifier ❙ Optional RS 232 communications module for future enhanced flexibility KEY FEATURES INCLUDE The KOLEKTOR is a high fidelity stereo preamplifier designed to manage and control the ever-increasing amounts of audio source formats without com- promising signal purity. It combines high precision solid state switching, surface mounted components and Linn’s patented silent Switch Mode Power Supply to maximise signal integrity and minimise noise. The KOLEKTOR’s ten audio inputs include one precision equalised, low noise phono stage, fully integrated and electronically switched to avoid any mechanical connections in the sensitive phono signal path. Three line outputs enable tri-amping without the need to daisy chain power amplification whilst a tape output allows off board analogue recording. A separate headphone amplifier stage is also included internally to drive headphones without compromising signal quality in the main audio path. Tone controls enable subtle refinements to suit any listening room or type of music. Available in Black and Silver finishes, the KOLEKTOR is a flexible control solution that can be auditioned at Linn specialist retailer outlets worldwide. 3 KOLEKTOR PREAMPLIFIER SPECIFICATION A versatile audio system controller 2 1 1, 2, 3 and 4 KOLEKTOR PREAMPLIFIER Linn, the Linn logo and KOLEKTOR are registered trademarks. 4

❙ Introduced 1998 ❙ Type Stereo Preamplifier/System Controller ❙ Input connectors Input 1: phono sockets for high quality MM phono input Inputs 2-10: phono sockets for line level source inputs ❙ Audio input impedance Input 1: 47 k Ohms in parallel with 68 pF ❙ Inputs 2-10: 50 K Ohms ❙ Maximum input level 2.5 V rms ❙ Nominal input levels Input 1: 2.5 mV rms Inputs 2-10: 2V rms ❙ Output connectors 3 pairs phono sockets for line output ❙ 1 pair phono sockets for off- board analogue recording (tape) ❙ Output impedance Line output: 300 Ohms ❙ Tape output: 100 Ohms ❙ Gain Input 1: 45 dB maximum @ 1 kHz ❙ Inputs 2-10: 10 dB maximum ❙ Tape output: 36 dB from input 1 @ 1 kHz ❙ 0 dB from inputs 2-10 ❙ Gain control range 60 dB in 1 dB steps ❙ Response adjustments Bass: +/- 10 dB at 40 Hz; Treble: +/- 10 dB at 20 kHz ❙ Mains input range 100-115 Vac @ 50/60 Hz +/- 10% ❙ 220-240 Vac @ 50/60 Hz +/- 10% ❙ Fuse rating T800mA ❙ Power consumption 8 W maximum ❙ Dimensions H 80 mm x W 320 mm x D 325 mm ❙ H 3.15 inches x W 12.6 inches x D 12.8 inches ❙ Weight 4 kg (8.8 lbs) The above information is subject to change without prior notice. Linn Products Ltd Floors Road, Waterfoot, Glasgow G76 0EP, Scotland, UK. Telephone: +44 (0) 141 307 7777, Facsimile: +44 (0) 141 644 4262, Helpline: 0500 888909, E-mail: [email protected], Website: www.linn.co.uk Linn Products Inc 8787 Perimeter Park Boulevard, Jacksonville FL 32216, USA. Telephone: +1 (904) 645 5242, Facsimile: +1 (904) 645 7275, Helpline: 888-671-LINN, E-mail: [email protected], Website: www.linninc.com Linn Deutschland GmbH Albert-Einstein-Ring 19, 22761 Hamburg, Deutschland. Telephone: +49 (0) 40-890 660-0, Facsimile: +49 (0) 40-890 660-29, E-mail: [email protected], Website: www.linn.co.uk Linn Records Ltd Floors Road, Waterfoot, Glasgow G76 0EP, Scotland, UK. Telephone: +44 (0) 141 303 5027, Facsimile: +44 (0) 141 303 5007, Helpline/Mail order: +44 (0) 141 303 5029, E-mail: [email protected], Website: www.linnrecords.com Pack 871 (11/03)