Loewe 32 HD Operating Instructions Manual

■ Spheros 32 HD/DR+ ■ Spheros 37 HD ■ Spheros 37 HD/DR+ ■ Xelos SL 32 HD ■ Xelos SL 32 HD/DR+ ■ Xelos SL 37 HD ■ Xelos SL 37 HD/DR+ TV. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 1

design, excellent quality and exceptional functionality. To ensure that your product retains these properties for as long as possible, please follow the operating and safety instructions contained in this manual. This instruction manual will help you to get started. Your Loewe Team Contents Remote control RC3 – TV functions 3 Rear side connections Signal Box 4 Operation on the Signal Box 5 Setup 6-7 Installation possibilities 6 For your safety... 6 Handling the mesh tube 7 ✳ Cleaning the front panel 7 Connect LCD screen and antenna(e) to the Signal Box 8 Initial installation 9 Batteries 9 Connection 9 Switching on 9 Automatic programming 9 Daily handling 10-12 Remote control RC3 10 TV equipment 10 Use the drive buttons in TV- and STB position for VCR, DVD or Digital Recorder 10 Switching on/off 10 Changing channels 11 Call Audio/Video programs - AV selection 11 General menu operation 12 Adjusting the picture 12 Adjusting the sound 12 Operation on the TV set (Signal Box) 12 Modes of operation 13-18 TV mode 13 Menu functions in TV 14 Picture in Picture (PIP) 15 EPG mode 16-17 TV-radio mode (SAT radio) 17 Teletext mode 18 LOEWE Dialog 19 Operation of additional equipment 20-30 Video mode 20 Digital Link Plus 20 Logging in equipment 21 Connecting VCR equipment 21 Search for and store the VCR station 21 Video playback 22 Calling an AV program in the AV selection list 22 IR-Link 22 Digital input/output 23-24 AV-connection/Select device 24 Converting the remote control in order to operate a Loewe DVD player or devices from other manufacturers 24 Converting the remote control for devices from the code list 24 ✳ Rotating the TV set (only Spheros) 26 ✳ Viewing angle, range of rotation 26 Connecting Loewe sound systems 27 Loewe sound systems Concertos 28 Loewe sound systems Certos/Concertos 29 Connecting the DVD Preceiver Auro 8116 DT and Tremo 30 Displaying PC images (VGA/DVI) 31 Connecting personal computers 31 What to do when ... 32-33 Technical data 34 Available accessories 35 Secret code 35 Service addresses 36 Codelist RC3 37-43 Functions marked by ✳ are not available in all types of TV sets but can usually be retrofitted. Ask your dealer if you are interested. Manufactured under license from Dolby Laboratories. ”Dolby” and the double-D symbol are trademarks of Dolby Laboratories. dts Is a registered trademark of Digital Theater Systems Inc. Acoustimass® is a registered trademark of the Bose Corporation. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 2

Control LED for programming the remote control Switch on/off – in standby yellow key: last station ✳ Digital Recorder: bookmark forward/fast forward /PhotoViewer: next picture TV without Digital Recorder: freeze frame off Digital Recorder: play/set bookmark /PhotoViewer: start slide show TV without Digital Recorder: freeze frame on Digital Recorder: stop (live picture) /PhotoViewer: stop slide show blue key: programme info on/off ✳ /in the PhotoViewer overview: next page of overview V–/V+ volume quieter/louder Call main information /in menu: Info texts on/off /PhotoViewer: PhotoViewer operating instructions Status display on/off /in menu: hide menu /PhotoViewer: show/hide picture info Call AV selection PIP on/off /PhotoViewer: zoom picture Picture menu on/off /PhotoViewer: PhotoViewer operation on/off Sound menu on/off Radio mode on/off Select programme directly in menu: enter numbers or letters TV without Digital Recorder: freeze frame on Digital Recorder: freeze frame/pause (delayed viewing: start) /PhotoViewer: stop slide show Digital Recorder: bookmark back/rewind /PhotoViewer: previous picture ✳ green key: call standard settings ✳ red key: personal teletext pages /Digital Recorder: DR archive on/off /in the PhotoViewer overview: previous page of overview in menu: select/set /in the PhotoViewer overview: select picture /Digital Recorder: LOEWE dialog on Station table list on /in menu: confirm /PhotoViewer: call photo from the PhotoViewer overview /Call PhotoViewer overview P+/P– select program up/down Teletext mode on/off Call menu /in menu: back EPG on/off /PhotoViewer: turn picture Set picture format Video operation with video operating lin on/off Timer overview Change-over switch for operation of TV, VCR, DVD recorder/player or Set Top Box Digital Recorder: record immediately Remote control RC 3 – TV functions ✳ The drive buttons can be switched for operating a DVD player/recorder or a VCR. ✳ You can assign other functions to the color keys for the TV mode. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 3

Center Sub L R SOURROUND DVI-INPUT D-SUB DVI-OUTPUT CONTROL RC5/ RC6 VGA DISPLAY DIGITAL L R AUDIO IN 3 L R AUDIO OUT CR/PR CB/PB IN2 OUT AV 1 Socket for power cable Loewe Online VGA input Connection for Loewe Online Box Connections for LCD monitor Digital Visual Interface input (✳✳✳ VGA input) Antenna socket VHF/UHF/cable Euro-AV socket 1 Connection Speaker system Sound input analogue (VGA) ✳ Satellite- antenna socket (analogue/digital) ✳ Satellite antenna socket (analogue) Infrared signal out (for HMM) Infrared Link RC5/RC6 ✳✳Connections for active speakers Euro-AV socket 2 Digital sound inputs Sound output analogue left / right Sound input analogue left / right Sound input TV Active Certos/Auro Component Video inputs Digital sound output Rear side connections Signal Box ✳ Only in the set version with ”Digital-TV upgrade kit 2 Sat/Twin-Sat CI”. ✳✳ The ”SURROUND”, ”Center” and ”Sub” sockets are only activated when equipped with Dolby Digital (AC3). ✳✳✳ VGA Connection via VGA/DVI adapter cable. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 4

PHOTOVIEWER COMMON INTERFACE – + Slots for memory cards SmartMedia (SM) CompactFlash (CF) Multi Media Card (MMC) Secure Digital (SD) Memory Stick (MS) AV-S VIDEO L AUDIO R PHOTOVIEWER COMMON INTERFACE – + Video input AVS (CVBS) S-video input Display menu Channel up/down Set in the menu Headphone socket Sound input Left / Right ✳ Sockets for Common-Interface- Modules Operation on the Signal Box Open control panel ✳ Only in the set version with ”Digital-TV upgrade kit 2 Sat/Twin-Sat CI”. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 5

PHOTOVIEWER COMMON INTERFACE – + ➝ Setup Installation possibilities: • as a desktop unit – on a sideboard or table (Xelos SL 32 HD/37 HD. – Using a rotary table stand (Motor Unit) you can adjust your Spheros 32 HD or 37 HD easily with the remote control to suit your sitting position. • on a Flat-TV F-Stand as a standing unit, manually rotatable. • Spheros 32 HD or 37 HD on the System Rack Cube 1, Cube 2 with motor control for rotating the TV set and shelves for DVD player, VCR etc. • as a wall unit, the flat screen (LCD) can be hung on the wall like a picture. It can be tilted up to 5°. Auxiliary devices such as VCRs, DVD players, Pay-TV decoders, Loewe sound systems Concertos/Certos can be connected to the Spheros Signal Box. Operation We have designed the TV set in such a way that it is easy to operate with menus. If you need information on operating the set, simply press the i key on the remote control to display the help texts, which will quickly enable you to understand the system. If it is a matter of operating the TV, you can access a function directly from the index. This saves you from having to read through detailed operating instructions and is the reason, why this operating manual only explains the most important operating steps. For your safety ... For your own safety and to avoid unnecessary damage to your equipment, protect it against • moisture, splashing and dripping water • shock and mechanical stress • cold, heat and extreme temperature fluctuations • dust • covering which obstructs air circulation • tampering with the insides Never place vases filled with water, lit candles etc. on the TV set. If you have moved the set out of the cold into a warm environment, leave it switched off for about an hour because of the possible forming of condensation. Lightning can damage your TV through the antenna and the mains. Therefore pull out the antenna and power plugs during thunderstorms and in longer periods of absence. Only transport the unit in an upright position. • Avoid metal parts, needles, paper clips, liquids, wax or similar getting into the TV set through the air venting slits in the rear panel. This can lead to short-circuits and possibly to fire. If something should get into the set switch it off immediately at the on/ off switch, pull out the power plug and notify the after-sales service for inspection. • The TV power plug must be easily accessible so that the TV can be disconnected from the power supply at all times. • Lay the power cable so that it cannot be damaged. The power cable may not be kinked or laid over sharp edges, not stood on and not exposed to chemicals, the latter also applies to the device as a whole. A power cable with damaged insulation can lead to electric shocks and is a fire risk. • When removing the power plug, pull the plug housing and not the cable. The wires in the plug could be damaged and cause a short circuit the next time it is plugged in. • Your new TV has been built exclusively for use in a home environment. The warranty covers this normal use of the device. • Only have repairs done by the Loewe Service. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 6

PHOTOVIEWER COMMON INTERFACE – + Setup and cleaning Only hold the housing for transporting and never the panel. The front panel and the LCD screen underneath it are made of glass and may break if not properly handled. If the LCD screen is damaged (not the glass panel) and in case of leaking liquid crystal, wear rubber gloves to carry the device. In case of contact with the skin, wash the affected areas thoroughly with water. Note During the whole period of use, pixel errors may appear on the screen in the form of lighter or darker spots, this phenomenon is typical for an LCD display. It is not a defect. • Install the Spheros Signal Box and the screen with room for air circulation. The air vents may not be covered by objects such as magazines, table cloths, curtains etc. • Check the strength of furniture (e.g. tables, sideboards) before placing the set on it. • Take the swivel range into account when installing a set with a rotary motor unit. • Make sure no bright light or sunlight falls onto the screen otherwise reflections will be caused and the brilliance of the picture lost. • Do not place the Signal Box on edge but on its feet. • Do not place naked flames, e.g. lit candles, on the set. Note on installing the flat screen (LCD): Observe the enclosed installation instructions depending on the type of set you have purchased and installation. With the Xelos SL 32 HD and 37 HD types a stand (Xelos table stand) is usually delivered for the LCD. Handling the mesh tube Use the enclosed mesh tube to lay the screen, base, wall holder or rack cables tidily and guide the hose with the cables to the Signal box. This looks more elegant. The diameter of the mesh tube widens when it is pushed together lengthwise (see figure). This makes it easier to push through the cables with plugs. Cleaning the front panel (Only for Spheros 32/37 HD) The inside of the front panel and the LCD screen need to be cleaned from time to time. Only remove the front panel when the TV has been switched off and has cooled down. The metal frame of the LCD panel may reach a temperature of up to 60°C in operation ! • Hold the glass panel at the bottom right and left and pull the panel out of the guide about 4 cm. • Push the glass panel up evenly. • Unhook the glass panel at the top and remove. Use a damp, soft cloth to clean the LCD screen and a glass cleaner for the glass panel. Replacing the front panel: • Make sure you do not damage the LCD screen with the fastening bolts on the front panel. • Hang the glass panel into the guide rails at the top with both fastening bolts. • Then press the glass panel down lightly onto the screen until it snaps into place. Clean the other components such as the remote control and signal box with a damp, soft cloth only (without aggressive and abrasive cleaning agents). 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 7

Center Sub L R SOURROUND DVI-INPUT D-SUB DVI-OUTPUT CONTROL RC5/ RC6 VGA DISPLAY DIGITAL L R AUDIO IN 3 L R AUDIO OUT CR/PR CB/PB IN2 OUT AV 1 DVI-INPUT ✳✳ CONTROL AC INPUT 220V-240Volt D-SUB TV R Connect LCD screen and antenna(e) to the Signal Box TFT-LCD monitor Removing the connection cover Do not just pull the cover (fig.) back over the connections. Reach into the opening in the cover and pull it back slightly at the top until it snaps open. Then pull the cover up and out. Connect both the system cables and the power cable to the LCD screen as shown in the figure. Then replace the cover. Switch on/off Signal Box ✳ The antenna sockets 1 and 2 are only available in the set version with ”Digital-TV upgrade kit 2 Sat/Twin-Sat CI”. ✳✳ The connection socket ”CONTROL” is only available for Spheros 32/37 HD and designed for a Motor Unit! Note: For optimum picture resolution use the "Digital Visual Interface Input DVI" only connecting cables less than 2 meters long. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 8

Center Sub L R SOURROUND RC5/ RC6 DIGITAL L R AUDIO IN 3 R OUT AV 1 Initial installation Batteries To insert or change the batteries, press the point marked by an embossed arrow. Push the cover of the battery compartment down and remove it. Insert the batteries of the alkaline manganese type LR 03 (AAA) with the correct polarity (+/-). Then push the cover back on. Note on disposal of batteries: The original batteries do not contain any pollutants such as cadmium, lead and mercury. Used batteries do not belong in the domestic waste. They must be taken to the appropriate collection points according to the national laws. Ask your dealer. Connecting Antenna Connect your antenna or cable system to the UHF/VHF antenna socket on the back of the Signal Box. • In sets with the ”Digital-TV Upgrade Kit 2 Sat/Twin-Sat CI- or CIP” connect the Sat antenna cable to the ”ANT-1” and ”ANT-2” sockets, in this way you can receive two satellite programs simultaneously, e.g. for PIP display, see fig. on page 9. • In sets with ”Digital-TV Upgrade Kit 2-T/S” connect the antennae to the Signal Box as shown below. Power mains After connecting the flat screen to the Signal Box, connect both devices to 230V/60Hz mains sockets. Switching on Press the On/Off button so that it is pressed in. Due to the LCD technology it takes about 2 minutes to reach full brightness. Switch on/off Automatic programming Automatic programming of the TV set is started the first time you switch it on. Follow the menus. First you have to select the menu language for your set. Then you specify which antenna you have connected to your TV and in what country you are using it. Then you start the station search. The TV set searches for, saves and sorts all programs which are freely receivable on your antenna system. You then see a list of the stored stations in which you can mark your favorites. Finally log in your video recorders, decoders, Loewe audio system and Home Automation with the connection wizard and connect these to the TV set according to the illustrated connection plan. Select the settings with the arrows on the ring ... ... confirm the settings with OK. You then move on to the next menu ... ... press this button if you want information about the settings. You can repeat initial installation at any time, e.g. after moving house. Call the index in the main information (i button). Then select the item "Repeat initial installation". Then start "Initial installation" with OK. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 9

Remote control for operating different Loewe units. Operating the TV: Set the rotary switch to ”TV”. Ex-factory settings are: Loewe video recorder, Loewe DVD recorder and for STB (Set Top Box) the d-box common in Germany. The remote control must be switched for operating a Loewe DVD player. TV equipment Functions marked by ✳ are not available in all types of TV sets but can usually be retrofitted. Ask your dealer if you are interested. Menu contents may differ from the ones shown depending on your TV equipment. Operation of the ”PhotoViewer functions” or the ”Digital Recorder”, if available, are described in a separate operating manual. You can show your TV equipment by pressing the INFO button on the remote control. Select the ”Equipment” line in the ”Main information” menu. Press the OK button. Hide the menu again with the END button. Use the drive buttons in TV- and STB position for VCR, DVD or Digital Recorder You can switch over the six drive buttons both for TV and STB for operating a VCR or DVD player/recorder. Operation of the built-in Digital Recorder Plus is specified ex-factory. First turn the switch to the main function TV or STB. Press the END and * EPG but- tons at the same time (5 secs). The display at the top left of the remote control flashes twice. Enter the numbers 988 one after the other. The display again flashes twice. Now turn the switch to the required function for the drive buttons. DVD, VCR or TV if the Digital Recorder is to be used. Press the # PIP button to com- plete the setting. The display flashes twice. The setting is saved. Switching on/off Your TV set is equipped with an economy standby power supply unit. On standby the power consumption drops to low power. If you want to save even more electricity, switch the set off at the On/Off switch (Signal Box). But remember that EPG data will then be lost and timed recordings will not be made. When the TV is switched on, you can switch it to standby with the blue on/off button. The red standby indicator on the set lights up. If the green indicator is also alight a timer recording on the VCR is in progress, EPG data input is taking place or radio mode without on-screen display is active. From standby it is best to switch back on with the blue On/Off button or with a numeric key (station 0-9). The green (blue) operating LED then lights up. When you switch on the TV with OK, you see the station table and can choose a station. None of the indicators lights up when you switch off the TV set with the On/Off button on the set. Switch on the TV set with the On/Off button on the set when it is switched off. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 10

AV Selection abc pqrs OK OK Channel overview: TV Numerical AVS AV3 AV2 AV1 0 VIDEO 1 ARD 2 ZDF 3 SAT.1 4 RTL 5 VOX 6 S–RTL 7 N–TV 8 DSF 9 TM3 10 PRO7 11 RTL 2 12 WDR 3 13 BR 3 14 HR 15 MDR 3 0 9 Select and press OK to proceed Menu Info End Change sorting Change programs Favourite programs ... Select program: OK INFO MENU END AV wxyz ... Channel overview: TV Alphabetical ARD BR-ALPHA BR3 CNN INT. CAM DSF DVD EUROSPRT HOT HR KIKA MDR 3 N–TV ✳ABCDEFGHIJKLMNOPQRSTUVWXYZ Select and press OK to proceed Menu Info End Change sorting Change programs Favourite programs OK INFO MENU END 120-240V 50/60Hz SERVICE IR- Link SYSTEM ANT-1 ANT-2 PIP UHF/VHF AUDIO IN 2 Y IN1 AUDIO IN1 L R AV 2 ( RGB ) Center Sub L R SOURROUND DVI-INPUT D-SUB DVI-OUTPUT CONTROL RC5/ RC6 VGA DISPLAY DIGITAL L R AUDIO IN 3 L R AUDIO OUT CR/PR CB/PB IN2 OUT AV 1 RFin AV1/TV AV2/Dec RFout Daily handling Changing channels Channels up/down (only favorite stations if these are shown in the station table). With the numeric keys on the remote control The set has a dynamic memory with 220 (with DVB 1470) memory slots. If up to 9 stations are stored, you only need to enter one number, up to 99 two numbers, up to 999 three numbers and above 999 four numbers (please look in the station table to find out how many stations have been stored). 1-digit stations Keep the button 0 - 9 pressed for one second, the channel then changes immediately. or press the button 0 - 9 briefly, the channel then changes after 2 seconds (immediately when up to 9 stations are stored). 2-digit stations Keep the second numeric key pressed for one second, the channel then changes immediately. or press both numeric keys briefly, the channel then changes after 2 seconds (immediately when up to 99 stations are stored). 3-digit stations Keep the third numeric key pressed for one second, the channel then changes immediately. or press the three numeric keys briefly, the channel then changes after 2 seconds (immediately when up to 999 stations are stored). 4-digit stations Press the four numeric keys briefly, the channel then changes immediately. Depending on how many stations have been stored, you can place one or more zeros in front of the number and select for example station 7 = 07 or 007 or 0007. Call Audio/Video programs - AV selection for playing AV equipment. AV connection (e.g. AV1 socket) or … Select VIDEO for VCR transmitters if the VCR is only connected to the ”VHF/UHF” antenna socket on the Signal box. See Fig. With the station table Call the station table with OK Mark the station (the marked station is shown in the PIP pictures) or ... mark with numeric keys Call the marked station Sort alphabetically/numerically (blue button) Show favorites only (yellow button), selectable in the "TV Menu-Programs". 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 11

With DNC you can eliminate or reduce picture interference, e.g. due to poor reception. P+ OK P– V– V+ Volume 36 other ... Volume Sound adjust Loudness Listening mode Stereo Panorama Dolby Virtual OK OK TV menu Standard settings Sound zap2text Picture Connections Settings Rotate TV Picture Contrast Picture adjustment Brightness Sharpness other ... Colour 32 Picture vert. OK OK OK OK OK + – + – Daily handling General menu operation Not all functions can be selected directly with buttons on the remote control. To keep the number of buttons on the remote control to a minimum, operating menus are offered for several operating functions. Which buttons you use to operate these is shown in the respective menu. Setting the picture With the remote control RC2/RC3: Call the TV menu, press the MENU button. Mark (white field) Call the menu with OK or � Grey menu items cannot be selected Set (setting value and bar) Mark other menu items Set/select Show/hide info texts on/off Other picture settings are: Contrast, Picture adaptation, Colour, Brightness, Vertical hold (not for 16:9 or 4:3), Focus, Tint (only for NTSC), Picture format, Noise reduction (DNC), Movement compensation (DMI) and automatic picture size adaptation (AMD). Back to the previous menu level Hide all menus Adjusting the sound Adjusting the volume Adjust the volume with "others ..." you can select and ... ... set other sound settings. Mute Sound off; Sound on: press button again or adjust volume. The status is displayed briefly on screen. Other sound settings with the remote control RC3: Call ”TV menu–Sound”, press the button with the remote control RC2: Call the TV menu, press the MENU button. Select line ”Sound”. confirm Select sound function set/ select and ... accept with OK Other sound settings: Sound via the loudspeakers of the TV set or another system. Listening mode Stereo/Panorama/Dolby Virtual. Sound adaptation, treble, bass and balance. Sound select for loudspeakers and headphones, AV output sound. Volume of the headphones, automatic volume and max. volume. Operation on the TV set (on Signal Box) Changing channels on the TV set Channel up Channel down Volume, contrast and color Press the function button until the desired function is marked More volume, contrast or color Less volume, contrast or color 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 12

Explanation of the remote control Back Info End Connections Select control level Select and call up with OK Technical spec. of TV set Index OK INFO MENU END TV menu Standard settings Sound zap2text Picture Connections Settings Rotate TV Clock 20:15 1 ARD Stereo Modes of operation TV mode In initial installation and daily operation, the TV set is in TV mode. This is also the case when none of the other modes of operation such as EPG, Teletext, PIP, Video or Radio is selected. Every one of these modes of operation has a menu which you can call with the MENU- button and with some color button assignments. Function of the color buttons in TV mode You can assign the functions of the four color buttons yourself. The following functions are set at the factory: red: personal teletext page (with DR+: call DR archive) green: call picture format setting (with DR+: call timer overview) yellow: call last viewed station blue: call station info You can assign other functions to the buttons in the TV menu "Settings" - "Function keys". Status display Show/hide status Main information Call main information The explanation of the remote control shows the function of every button in different modes of operation of the TV set and the remote control. The index answers many questions regarding all aspects of the TV. If it is a question about the operation, you have direct access to the operating function from the index. Loewe TV sets are supplied in different models with different equipment. You can find out what equipment your TV has under the menu item "Technical spec. of the TV set". When you have made all the settings and connections, you can switch over to "Simplified control"(not in digital TV) using "Select Mode". Then the "Settings" and "Connections" can no longer be launched in all modes of operation menus. Switch "Simplified control" back off when you want to make settings. TV menu Launch the TV menu Standard values You can save the setting for picture and sound you have made in this menu and launch them again later. Connections You will find information about this in the chapter "Logging in and connecting AV equipment" on page 21/23. zap2text Some stations use this service. If teletext pages are referred to during a program, the TV set saves and/or displays this page number. You call the teletext page with the TEXT button from the display during the program or from this menu. Some settings in the TV menu: Child lock Use the child lock if you want to prevent your children watching after a certain time, once or daily, all or certain programs. On-screen displays You can define duration and position of the displays, the content of the program and status display and activate or deactivate zap2text as a display. Timer functions You can have your TV switch on and off at specific times or have yourself reminded by a signal tone. Time and date When you receive teletext, the TV records the right date and time settings. The time serves as information for timer recordings, timer functions and EPG. If you do not receive teletext you should set the date and time and not switch the TV off with the mains button as the settings will then be lost (Not all stations transmit the full date, you may have to add missing data manually). Language If "your" menu language is not set, you have to select the "Language" menu in a language you cannot understand: Press the MENU-button (TV menu), mark the last menu item (settings), press the OK button and mark the last menu item (Language) under "other ..." and press the OK button. Now select the right language and confirm with OK. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 13

Menu functions in TV EPG Call the electronic program guide of the TV set. EPG can be called and hidden with the EPG button. PIP Call/hide the picture in picture function of the TV set. PIP can be called and hidden with the PIP button. TV radio (SAT radio) Switch the radio mode of the TV set on/off with RADIO button. Prerequisite: Your TV is equipped with a satellite tuner (see on page 17). Video Call or hide the video control bar. Press the button . Format Call the selection for setting the picture format. Select the picture format by repeated pressing of the button. AV input Call the AV selection for playing connected equipment (e.g. VCR, camcorder or DVD player). The AV selection can be made with the AV button. Picture Show/hide the picture menu. Press the button You can set the TV picture with the help of the picture menu. The Picture menu can also be called by the TV menu ‘ Picture. Sound Show/hide the Sound menu. You can set the TV sound with the Sound menu. The Sound menu can be opened under the ”TV menu – Sound”. On the RC3 remote control also directly with the button. Sound mode Call the sound mode settings of the connected Loewe DVD-Preceiver "Auro". Press the button . Timer Call the timer overview of the TV set. Press the button . Digital PhotoViewer With the Digital-PhotoViewer integrated in the Signal Box you can show pictures taken with digital cameras from the most common memory cards (see fig. page 5) on the screen. After inserting the memory card the set switches to PhotoViewer mode and you first see an overview of the pictures stored on the card. The set switches back to TV mode when the card is pulled out. You will find a detailed description in the ”Digital PhotoViewer” operating manual enclosed. Digital Recorder Plus (DR+) If a hard disk is integrated in the Signal Box (set variant), you can record and play TV programs. Depending on the selected recording quality the possible recording capacity is between about 20 and 100 hours. The possibilities of the Digital Recorder are much more versatile than those of a video recorder. Use the separate ”Digital Recorder Plus” operating manual for operation. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 14

The image on the right pertains to the PIP image and has no sound. TV image and PIP image are separated from each other by a colored line (PIP status). Adjusting “iPIP” Switch on the PIP menu with the MENU button. Mark the “Functionality” bar. Select “iPIP”. Hide the menu with the END key. iPIP function: In iPIP the presently displayed TV image becomes the PIP image. For the TV image, select another channel and retain the PIP image. In iPIP, the PIP status is orange-colored. Show/hide PIP picture Also read the info text; press the INFO key. The PIP image changes back into TV image, when you switch off PIP. Changing the channel of the TV image The PIP status must be white. If it is not, press the green button. Then select the station as normal. PIP channel scan The PIP status must be green. If it is not, press the green button. Start the PIP scan with the blue button. The PIP status turns blue. The PIP channel now changes automatically. Stop the station scan with the blue button. The PIP status turns green again. Interchanging PIP image/TV image The PIP status must be green. If it is not, press the green button. Interchange the pictures with the yellow button. Position of the PIP image The PIP status must be green. Call the PIP menu with the MENU button. Mark “Position”. Select a symbol for the position. Hide PIP menu PIP menu Back Info End Type Position Size Functionality iPIP Standard-PIP INFO MENU END OK OK PIP PIP P+ OK P– V— V+ P+ OK P– V— V+ OK OK OK OK 4 RTL PIP menu Back Info End Type Position Size Functionality INFO MENU END PIP menu Back Info End Type Position Size Functionality INFO MENU END Modes of operation Picture in Picture (PIP) PIP can be displayed as Standard PIP, iPIP or Split Screen by default. Standard PIP functions: The Standard PIP displays a PIP image in the presently displayed TV image. Show/hide PIP picture The status of the PIP mode i.e. PIP channel selection or PIP scan is shown in the status display in a colored square before the channel name and appears while changing the channel or on pressing the END key. If the PIP status is green, you can select the PIP channel: Channel up/down ordirect PIP image as static image The PIP status must be green. If it is not, press the green button. Then press the red button; the PIP image becomes a static image. Press the red button again for a moving image. Size of the PIP image Mark “Size” in the PIP menu. Select “Large” or “Small”. Split Screen Mark “Type” in the PIP menu. Select the symbol for Split Screen. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 15

Select and press OK to view Record Day (Fri 3.8./now) Topics (all topics) Programmes (all) Info Detail Menu End 19:15 VOX Zurück in die Vergangenheit 19:30 ZDF WISO 19:30 BR3 Immer weiter, immer höher und dann? 19:40 SAT1 echt wahr! 19:40 RTL Gute Zeiten, schlechte Zeiten –20:15 19:50 MDR Mach dich ran 20:00 ARD Tagesschau 20:00 HR3 Tagesschau 20:00 NDR Tagesschau 20:00 WDR Tagesschau OK INFO MENU END TEXT now soon 21:00 22:00 23:00 00:00 01:00 02:00 03:00 04:00 05:00 ... EPG Current: Fri 03.08./20:08 Select and view with OK Record Day (Sat 3.8./12:00) Topics (music) Programs (all) person. topics all - ... Hobby Sport Child Knowledge Music ... Info Menu End 12:00 NDR WunschBox -13:00 14:03 ARD WunschBox 20:45 MDR Das deutsche Schlagermagazin 21:00 NDR Bi uns to Hus 01:25 NDR Bi uns to Hus 12:00 NDR WunschBox 14:03 ARD WunschBox OK INFO MENU END EPG Current: Fri 03.08./20:08 Select and memorize with OK Record Time (Sat 4.8./14:03) Topics (Music) Programs (fav.) Favorite programs all ARD ... Info Menu End 14:03 ARD WunschBox -15:00 20:45 MDR Das deutsche Schlagermagazin 14:03 ARD WunschBox OK INFO MENU END EPG Modes of operation EPG mode EPG is the electronic station guide for TV programs. With this system, you can easily find the programs that interest you (sorted according to time, day, topics and programs). You can memorize programs and program recordings. A wizard is activated the first time you use EPG (not with DVB) which guides you through the necessary settings. Then run the data acquisition (see page 17). Using the EPG Switch EPG on/off The first line is framed initially in green. The green frame stands for time and date, with the green button you switch between time and day or, if the frame has a different color, back to the green frame. With the arrow buttons �� you select: now, later, the time or day for starting stations. The list of stations below is updated accordingly. With the buttons �� you mark a station you want to watch (now running), memorize or record. The frame turns yellow when you press the yellow button. The yellow frame means you can select topics. With the arrow buttons �� you choose between personal topics, all topics and the individual main topics such as Film, News, Show, Music etc. The list of stations below is updated accordingly. With the �� buttons, you mark a station you want to watch (a program currently running), memorize or record. The frame turns blue when you press the blue button. The blue frame signifies station selection. Use the arrow buttons �� to choose between your favourite stations, all stations or the station just set. You can select another individual station by moving to "..." with �, marking a station in the list and storing it with OK. The respective current settings are shown next to the operating notes for the color buttons. Direct input of time You can also enter the time directly with the numeric keys of the keypad. After entering the first digit, the time is displayed first next to the symbol of the green button by asterisks and is then replaced by the entered numbers, e.g. 2100. If the entered time has already passed, its entry is used for the following day. Viewing or noting a program You can watch or note the program selected with the �� buttons by pressing the OK button. A + sign is set in front of the program title for noting. At the start of the broadcast, this program is switched to or you see a message. Programming recording with VCR You prepare the station marked with the buttons �� by pressing the red button. Under "Timer Recording" you select VCR and whether you want to record one program or a serial. A red dot is set in front of the title of the program. If a program is already marked by a red dot, you can delete the timer data again with the red button (the red dot disappears). Calling detailed information If detailed information about the selected station is available, you will see the TEXT- button displayed additionally. You can call the detailed information with this button. Other functions in the EPG menu: Call the EPG menu with the MENU key. List of memorized programs You will find the stations you have memorized in a list. Switch on TV at mark You can have the TV set switch on automatically from standby mode at the time of a marked program. If you are not in at this time, a security prompt makes sure that the TV switches off again after 5 minutes. Indicate/start memorized station If the TV is already on when the memorized program starts you can have the start of the program indicated or the TV switched over immediately. Short info lines Short infos are broadcast for many programs. Set how many lines this information should have or switch the short info lines off. EPG entry If you want to start EPG operation, you can retain your last settings for topic and program selection or start with all topics and all programs. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 16

Program selection OK INFO MENU END Select provider Info 3SAT PRO7 RTL2 TV 5 TRT 1 Select provider and confirm with OK Back End Provider search Change provider list Program selection OK INFO MENU END EPG menu other ... Memorized stations first report Data acquisition off on Short info lines none EPG entry last setting Info Back End INFO MENU END Select personal topics Info Select topics and mark with OK Back End Film News Show Hobby Sport Child Knowledge Music Culture General music Jazz Rock/Pop Classical Folk/Easy listening Musicals/Opera Other mark all Mark only OK INFO MENU END OK OK EPG OK OK EPG menu List of memorized stations Select provider/program Favorite programs Select personal topics Timer Switch on TV when marked yes other ... Info Back End OK INFO MENU END OK OK OK Modes of operation EPG settings If you want to change the provider or want to have other programs evaluated, you can do this in the EPG menu. Provider search EPG on/off Call EPG menu Mark "Select provider/ program" Call Start provider search (green button). This may take some time. Mark the provider Save the provider This is followed by a station search and a list of TV stations is displayed which transmit data. Move on to the provider selection with the OK- button. If the stations offered are what you want, move on to the station selection with the blue button. Selecting stations for EPG Select the stations here for which information is to be collected. Stations marked by + are favorite stations. The provider supplies information for stations marked by E (terrestrial, cable and analog satellites) and D (digital), these are already marked (blue letters). Mark the station/Remove the marking red: Only mark favorite stations green: Mark all stations yellow: Only mark this station Back to the EPG menu Switching data acquisition on/off Mark "Data acquisition" in the EPG menu under "other" Select data acquisition off/on If, for example, you cannot receive any EPG providers and no DVB is installed in the TV set, you should switch off the data acquisition. Performing data acquisition The data must be collected first after these settings or every time the TV is switched off. To do this, select the program which you have defined as a provider and leave it switched on for about one hour or switch the TV set to standby mode. The green (blue) LED lights up in addition to the red LED after about two minutes. Data acquisition takes about one hour, in sets with a DVB module a little longer. The data are automatically collected between 2 and 5 in the morning when the TV is switched off to standby. Defining personal topics You will find the programs that interest you faster when you define your personal topics. Mark "Select personal topics" in the EPG menu and put together your list of personal topics. TV-Radio mode Switch the TV-radio mode on or off by pressing the RADIO button. If a satellite tuner and a DVB module are installed in your TV, radio stations are available. If these accessory modules are not installed, you can select only the audio inputs (connections AV1 to AVS, DIG IN 1, DIG IN 2) with the program table or with the keys �� and play an external audio signal through these. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 17

werden . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 1O.3O� Ein Zwilling zu viel . . . . . . . 314 12.OO� Tagesschau um zwölf tagesschau. . . . 11O� TV Guide. . 3OO/4OO Wetter. . . . . . . . . 17O� Kultur. . . . . . . . . 5OO Sport. . . . . 2OO/6OO� TXT-Quiz. . . . . . . 555 Lotto/Toto. . . . . 666� Wirtschaft. . . . . . 7OO Index. . . . . . . . . . 1O1� Impressum. . . . . .1O7 – + Inhalt� tagesschau 1OO 1OO ARD-Text O1.O7.O1 1O:3O:42 ARD-Text Teletext im Ersten Table of Pages (TOP) Back End Wetter Vorhersage Städte Regional Reisen int. Städte Biowetter Übersicht tagesschau Wetter Sport 1 TV Guide ARD heute ARD morgen FS-Sendungen TV Guide 2 Kultur Gesellschaft weitere . . . Select page and press OK to view OK MENU END Page selection Lotto/Toto. . . . . 666 Wirtschaft. . . . . . 7OO Index. . . . . . . . . . 1O1 Impressum. . . . . .1O7 – + Inhalt tagesschau OK OK OK OK OK OK OK OK Page selection 1OO 1OO ARD-Text O1.O7.O1 1O:3O:42 ARD-Text Teletext im Ersten Letzte Meldung: Libyscher Botschafter in London schließt Entschädigung für Lockerbie-Opfer nicht mehr aus Fußball: Rolf Hüssmann soll neuer Sportdirektor beim VfB Stuttgart werden . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 1O.3O Ein Zwilling zu viel . . . . . . . 314 12.OO Tagesschau um zwölf tagesschau. . . . 11O TV Guide. . 3OO/4OO Wetter. . . . . . . . . 17O Kultur. . . . . . . . . 5OO Sport. . . . . 2OO/6OO TXT-Quiz. . . . . . . 555 Lotto/Toto. . . . . 666 Wirtschaft. . . . . . 7OO Index. . . . . . . . . . 1O1 Impressum. . . . . .1O7 – + Inhalt tagesschau abc pqrs AV wxyz PIP Page selection 1OO 1OO ARD-Text O1.O7.O1 1O:3O:42 ARD-Text Teletext im Ersten Letzte Meldung: Libyscher Botschafter in London schließt Entschädigung für Lockerbie-Opfer nicht mehr aus Fußball: Rolf Hüssmann soll neuer Sportdirektor beim VfB Stuttgart werden . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 1O.3O Ein Zwilling zu viel . . . . . . . 314 12.OO Tagesschau um zwölf tagesschau. . . . 11O TV Guide. . 3OO/4OO Wetter. . . . . . . . . 17O Kultur. . . . . . . . . 5OO Sport. . . . . 2OO/6OO TXT-Quiz. . . . . . . 555 Lotto/Toto. . . . . 666 Wirtschaft. . . . . . 7OO Index. . . . . . . . . . 1O1 Impressum. . . . . .1O7 – + Inhalt tagesschau Menu Station –/+ Sub-page Recording Settings Back Info End Show TOP table Timer News flash INFO MENU END OK Geld Optionen 2 � 1 2 3 4 5 6 7 8 9 1O – + Modes of operation Teletext mode Teletext transmits information such as News, Weather, Sport, Program Previews and Subtitles. Teletext on/off Many stations use the TOP operating system, some use FLOF (e.g. CNN). Your TV supports both these systems. The pages are divided into general topics and topics. After switching on the teletext, up to 3500 pages are stored for fast access. Selecting pages with the colored buttons The colored bars (in TOP) or the colored writing (in FLOF) in the last line but one show you which colored buttons to use to scroll to general topics and topics. red: back to previously viewed page (not with FLOF) green: forward to next page (not with FLOF) yellow: to the next topic (only in TOP and FLOF) blue: to the next topic (only in TOP and FLOF) Page selection with the numeric buttons Enter the page number directly More functions for page selection Mark a specified page number on the page (Page Catching) Launch Scrolling in stored sub-pages. In the bottom line you will see which sub-pages you can already launch Launch contents page 100 The TOP table is a general list of teletext. You can only launch the table on channels which use the TOP operating system. Launch the TOP table Mark a general topic Select the Topics column Mark menu items Display page Displaying teletext pages Stop self-turning pages (HOLD) zoom: top half - bottom half - normal size TV picture on/off (Split text) Program timer recordings If the remote control is set to "TV" (no equipment combination), call the program pages of the current station with the Record button • in teletext mode. Select the station you want to record with �� and confirm with the OK button. Select VCR for "Timer data". Confirm with OK. Teletext menu Launch teletext menu Here you will find functions such as "News flash", "Show" hidden information, switch to other channels (if another tuner is available), enter 4-digit sub-page number directly and programme video timer recordings via teletext. In the settings you will find menus to define the preview pages, subtitle pages and personal teletext pages. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 18

� 09.09.03 other ... Frontal 21 21:00 - 21:45� ZDF Wunderschöner Norden 21:00 - 21:45� N3 Rundschau-Magazin 21:00 - 21:15� BR Quaks &Co 21:00 - 21:45� WDR other ... Select and view with OK Main info End EPG Record |TV now |Archive |Favorites |Teletext OK INFO END other ... Shimla 02.09.03 � ZDF AVO-Session Basel 2002 03.09.03� 3Sat Disco 05.09.03� 3Sat Quaks &Co 06.09.03� WDR other ... Select and view with OK Main info End DR-Archive |Archive |Favorites |Teletext |TV-now OK INFO END LOEWE Dialog 21:12 � 09.09.03 other ... 2� ZDF 3� RTL 4� Bayern 3 5� SAT1 6� Pro 7 8� Kabel 1 9� 3sat 10� PHOENIX 11� Arte other ... Select and press OK to switch Main info End Channel overview |Favorites� |Teletext |TV now |Archive OK INFO END LOEWE Dialog 21:12 � 09.09.03 ARD-BOERSE 731 � ARD WETTER 604�� BR NACHRICHT 112�� ZDF Press OK for more details Main info End Teletext |Teletext |TV now |Archive |Favorites OK INFO TEXT END LOEWE Dialog 21:12 � 09.09.03 LOEWE Dialog (only activated in connection with the Digital Recorder Plus) In connection with the Digital Recorder Plus the LOEWE dialog page offers an overview and quick access to information content of the TV, e.g. the programs currently showing, programs last recorded etc. You should have already made a few settings before using the LOEWE Dialog to provide selection possibilities. You should have made the EPG settings described on page 16 and run the EPG data entry. The Digital Recorder archive should also already contain recordings. You should have defined a few personal teletext pages. In all these cases you then have a useful selection. No LOEWE dialog is displayed with NTSC reception. You call the LOEWE Dialog with the arrow buttons on the remote control when no menu is displayed. Press one of the arrow buttons ����for about 1 second. The TV program just selected is shown in reduced size (the live picture). The blue bar shows you the selectable functions. The function on the left is active. You can move the function to the active position with the arrow keys �� . Above the selected function you see a selection which you can navigate with the arrow buttons ��and view with OK. With TV now - The selection of programs currently running acquired by the EPG system is displayed in TV now. If no EPG is received, a programme info of the station currently being received is displayed. With Archive - the selection of recorded programs in the DR archive is displayed. With Radio - the selection of programs of the satellite radio is displayed. If you have switched over to Sat radio mode, LOEWE Dialog cannot be called. If you do not receive satellite radio (no satellite tuner/DVD module), Favorites is displayed in place of Radio, that is favorite programs you have defined. With Teletext - the selection of personal teletext pages is displayed. This is how you select with the example of the "TV now" function Mark the desired station with the arrow buttons ��, the name turns blue. Other stations can be displayed with "others...". Press the OK button to watch the station. You can call LOEWE Dialog with the ���� buttons so that the desired function is ready for selection on the left. Call TV now Call Archive � Call Teletext � Call Favorites � 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 19

Video mode You can operate Loewe video recorders and DVD players with the video control bars even if they are hidden. The VCR's must be connected to the Euro AV sockets (Scart) and logged in under the "Connections" menu. Digital Link must be switched on on the Loewe video recorder. Only then can you use the control bar. You also need Digital Link for timer recordings of satellite programs controlled by the TV set. You can display up to two menu bars, these are displayed when the appropriate video units are logged in the "Connections" › "Connections: Connection plan" menu. Show/hide video menu bar Select video menu bar, if for example several VCRs or a DVD player and a VCR are connected. Select function Switch VCR/DVD on/off Select video input (Euro-AV socket) for the VCR Rewind (only for VCR) or Scan in rewind Stop (STOP) Playback (PLAY) Fast forward (only for VCR) or Scan in fast forward Pause (PAUSE) Next chapter (only for DVD) Previous chapter (only for DVD) Record Perform selected function. When you start a recording, the program you have just selected is recorded. You cannot switch over to another channel, it is locked. You can only switch over when the recording has finished. Exceptions: 1. You have installed several tuners (not PIP tuners) in the TV set, then you can watch another channel with the second tuner. 2. You can also watch the signal via an AV connection (e.g. DVD player or a second VCR). 3. In a VCR with Digital Link Plus the VCR tuner is used for the recording (not for satellite programs). Video menu Show the Video menu A line is displayed in the menu if a Link Plus Recorder is connected. The Video menu provides you with the following options: You can change and delete timer data or program new recordings in the "Timer" menu. The "Record" menu gives you the option for timer programming by EPG, teletext or manually. You can call the archive list with "DR Archive" if a Digital Recorder is built in. In the "Connections" menu you can log other AV equipment on or off. In the "Digital Link Plus transfer" menu the station data of the TV set (not satellite stations) are transmitted to the Digital Link Plus VCR. Digital Link Plus VCRs have the possibility for transferring the station data from the TV set to the VCR via the Euro-AV cable (not for satellite stations). Every time you change the station memory of the TV, you are asked whether you want to make a data transfer. The receiver unit of the VCR is always used for recording with a Digital Link Plus video recorder (not satellite stations) and the tuner of the TV set is available for watching TV. Loewe VCRs also have Digital Link, a system for controlling Loewe VCRs via the Euro-AV cable. If the Loewe VCR only has Digital Link, the TV tuner is used for recording. If you have installed your Loewe VCR in a concealed place, you can operate the Loewe VCR with the remote control. Operation with the control bar also works with Digital Link. Digital Link must be switched on on the video recorder. Only use fully wired Euro-AV cables, otherwise Digital Link or Digital Link Plus will not work. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 20

Store (red button) If you want to change the program, e.g. to "Video", select the "Name" line. Enter the new program name. A list of the stored stations is displayed Overwrite program (program 0 marked) pressing the red key Hide menus Plug the antenna plug back into the VCR. If you now get interference because a TV station is transmitting on the same channel as the VCR station, you have to change the transmitting station on the VCR (see operating instructions of the VCR) and search for the VCR station on the TV again. Manual adjustment Frequency 543.25 MHz Name VIDEO TV stand. B/G Back Info End Channel E30 (E21...E69) Col. st. Autom. Range UHF Search Store 0-9:Entry INFO MENU END Store 0 VIDEO 1 ARD 2 ZDF 3 SAT.1 4 RTL 5 VOX 6 S–RTL 7 N–TV 8 DSF 9 S–RTL 10 N–TV 11 DSF 12 TM3 13 PRO7 14 RTL 2 15 WDR 3 16 BR 3 17 HR 3 18 KIKA 19 PHOENIX 20 EUROSPRT 21 KABEL 1 22 MTV 23 CNN INT. 24 HOT 25 TV 5 26 VIVA Back Info End Overwrite station Insert station INFO MENU END Stations Automatic search Sort Delete Enter/change name Manual adjustment Preferred stations Settings Child lock On-screen displays Timer functions AV settings Time and date other ... Stations Manual adjustment Frequency 591.25 MHz Name VIDEO TV stand. B/G Back Info Channel E36 Col. st. Autom. Range VHF UHF Cable Search INFO MENU Manual adjustment Frequency 599.25 MHz Name VIDEO TV stand. B/G Channel E37 (E21...E69) Col. st. Autom. Range UHF Back Info End Search Store 0-9:Entry INFO MENU END OK OK OK OK OK OK def AV TV menu Standard settings Sound zap2text Picture Connections Settings Rotate TV 120-240V 50/60Hz SERVICE IR- Link SYSTEM ANT-1 ANT-2 PIP UHF/VHF AUDIO IN 2 Y IN1 AUDIO IN1 L R AV 2 ( RGB ) Center Sub L R SOURROUND DVI-INPUT D-SUB DVI-OUTPUT CONTROL RC5/ RC6 VGA DISPLAY DIGITAL L R AUDIO IN 3 L R AUDIO OUT CR/PR CB/PB IN2 OUT AV 1 RFin AV1/TV AV2/Dec RFout OK OK Operation of additional equipment Logging in equipment You have already logged in and connected all connected devices (video recorders, camcorders, DVD player, DVD recorder, Loewe audio system, Pay-TV decoders, Loewe home automation, door intercom) with the connection wizard when you put it into operation for the first time. If you want to connect further or different devices, you have to call the connection wizard in the TV menu - "Connections". Connecting VCR equipment In addition to the connection via the Euro-AV socket, you also have to connect the antenna (only for antenna or cable systems) through the VCR to the TV set. The antenna signal is then available both to the tuner in the VCR and the TV tuner. signal box video recorder Search for and store the VCR station (if there is no Euro AV cable) Switch on the test station on the VCR or insert a recorded tape and start playback. Then call program 0 on the TV set (set ex- factory to channel 36). Select the first menu item (VCR) in the AV selection list. To prevent "normal" TV stations being found in the search, pull out the antenna plug from the antenna input of the VCR temporarily (the plug attached to the cable to the antenna system). Call the TV menu Mark "Settings" Call Mark "Stations" Call Mark "Manual setting" Call Mark "Range" and Select "UHF" Mark "Channel" 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 21

list Call AV selection list Select AV connection (e.g. socket AV1) or VIDEO for the VCR station. Now you will see the playback from the connected AV unit. Calling an AV in the station table Call the station table In the numeric sorting you will always find the AV devices at the top of the list without station numbers. Select the AV connection and... confirm with OK. Now you will see the playback from the connected AV unit. Channel overview: TV Numerical AVS AV3 AV2 AV1 0 VIDEO 1 ARD 2 ZDF 3 SAT.1 4 RTL 5 VOX 6 S–RTL 7 N–TV 8 DSF 9 TM3 10 PRO7 11 RTL 2 12 WDR 3 13 BR 3 14 HR 15 MDR 3 0 9 Select and press OK to proceed Menu Info End Change sorting Change programs DR archive Favourite programs ... Select program: OK INFO MENU END AV OK OK OK OK VIDEO AV1 AV2 AVS VGA/XGA DVI COMP.IN AV Selection Operation of additional equipment Video playback There are several ways to see the picture and hear the sound of the VCR, DVD player or camcorder on your TV: 1. Use the Euro-AV sockets on the signal box and VCR. This is the best way to get a good picture and sound quality. For camcorders it is best to use the front sockets AVS. If you are playing back from a VCR with Digital Link Plus, the VCR picture is shown on the current station slot. If you are playing back from a standard VCR, DVD player or camcorder, select the AV socket to which the video signal is connected in the AV selection list or the station table. Video recorders emit a switching voltage during playback which the TV set can decode (can be activated for every VCR in the connection wizard or set Settings - AV Settings - Allow switching voltage to "Yes" in the TV menu). Then the VCR picture is shown on the current station slot as in Digital Link Plus VCR's. 2. You can also control logged in Loewe VCRs and DVD players with the video menu bar. See page 11/20 for more details. 3. Use the antenna connection between the VCR and the signal box. The sound is only transmitted in mono. Select the first menu item, e.g. VIDEO, in the AV selection. IR-Link ”IR-Link” enables you to operate a concealed d-Box or a video recorder from another manufacturer with its remote control via the TV set. The ”Signal Box” is equipped with a connection socket (IR-Link) for this purpose. You will need an ”IR-Link cable” which is obtainable from Loewe. Plug the jack plug of the cable with infrared transmitting diode into the IR-Link socket on the back of the signal box. The infrared transmitting diode at the end of this cable must be placed in front of the concealed device. The TV must be switched on for transmission. A napped strip is provided to help to lay the cable. The strip is self-adhesive; pull off the backing foil first. Stick the strip to the shelf or cabinet and press the cable into the naps. You can cut up the strip into several sections with a knife. Point the infrared remote control at the TV to operate the concealed VCR. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 22

Dig. DVB output tone Headphone volume Sound via TV AV amplifier (digital input) HiFi Concertos AV settings Allow swichting voltage Manual adjustment of AV standard Assign audio digital RGB insertion at AV2 120-240V 50/60Hz SERVICE IR- Link SYSTEM ANT-1 ANT-2 PIP UHF/VHF AUDIO IN 2 Y IN1 AUDIO IN1 L R AV 2 ( RGB ) Center Sub L R SOURROUND DVI-INPUT D-SUB DVI-OUTPUT CONTROL RC5/ RC6 VGA DISPLAY DIGITAL L R AUDIO IN 3 L R AUDIO OUT CR/PR CB/PB IN2 OUT AV 1 S-VIDEO OUT DIG OUT REAR MAINS L R (CVBS) (Y/C) VIDEO OUT AUDIO STEREO OUT VIDEO OUT I AUX-I/O II TO TV-I/O OPT OUT RIGHT SUBW. REAR RIGHT FRONT LEFT CENTER MULTICHANNEL AUDIO OUT DIGITAL AUDIO OUT PCM/MPEG2/AC3/DTS LEFT FRONT ➜ In Out VIDEO OUT AUDIO OUT R L DIGITAL OUT COAXIAL TO TV S-VIDEO OUT VIDEO OUT AUDIO OUT R L DIGITAL OUT COAXIAL TO TV S-VIDEO OUT DVD 1 DVD 2 120-240V 50/60Hz SERVICE IR- Link SYSTEM ANT-1 ANT-2 PIP UHF/VHF AUDIO IN 2 Y IN1 AUDIO IN1 L R AV 2 ( RGB ) Center Sub L R SOURROUND DVI-INPUT D-SUB DVI-OUTPUT CONTROL RC5/ RC6 VGA DISPLAY DIGITAL L R AUDIO IN 3 L R AUDIO OUT CR/PR CB/PB IN2 OUT AV 1 ✳ OK OK OK OK OK OK Assign audio digital Digital In1 no to AV1 to AV2 to AVS Digital In2 no ➝ Operating additional equipment Digital input/output Have you logged in your video equipment, e.g. DVD players or VCRs in the ”TV menu– Connections” as described on page 21? For analog picture and sound signals from the VCR or DVD player, use a Euro-AV cable to connect the Euro-AV socket 1 or 2 to the Signal Box and the corresponding AV socket of the VCR. The Signal Box also has 2 coaxial digital audio inputs ”DIGITAL IN”. For optimum sound transmission connect the output socket of the DVD player (DIG OUT) to the ”DIGITAL IN 1 or IN 2” socket on the Signal Box with a cinch cable. The Signal Box has an electronic switch so that it is possible to assign a digital audio input to every AV input. For example, if you switch a DVD player connected to ”Euro-AV 1” to Play, the respective assigned audio input ”DIG IN” is selected automatically. In this way, you can connect two DVD players, for example, without the need for tiresome replugging. Note The TV set without Dolby Digital Module can only play PCM-Stereo sound. ✳ to Concertos or digital receiver or Certos. Assigning digital inputs Switch on the ”Radio Mode”. The digital inputs ”DIGITAL IN 1” or ”DIGITAL IN 2” can be selected directly. 1. Call up the TV menu by pressing the MENU key. 2. Select the “Sound” line, then press the OK key. 3. “Sound via” select the “AV amplifier (Dig. input)” or “Concertos”, if Concertos has been connected. Press the OK key 4. Press the MENU key. 5. Select the bar “Settings“ and confirm with OK. 6. Select the item “AV settings”, then confirm with OK. 7. Select the “Assigning Audio digital“ line and press OK to confirm. 8. Select "Digital IN 1 - to AV3" for example for socket AV3 if a DVD player or CD player with coaxial-digital output is connected to digital input 1 and this device is logged in in the "Connections" menu. If the video signal from a play console is connected to the AVS socket, the relevant device is logged in and the digital sound is present at the digital input 2, then select “Digital In 2 – to AVS” etc. 9. You can complete the settings by pressing the END 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 23

flashes, you can test the functionality of the device you have just programmed. If the device cannot be operated or is difficult to operate, repeat the code input with the next code from the list. If no other codes are specified for this manufacturer, try a code suggested by the remote control. Switching over the remote control – with the suggestions by the remote control (see page 37-43) Switch on the device to which you want to set the remote control. Standby is not sufficient! Using the switch select whether you want to switch over to a VCR, DVD player or a Set Top Box. Press the END and * EPG but- tons at the same time (5 secs). The display at the top left of the remote control flashes twice. Enter the numbers 991 one after the other. The display flashes once after each number is entered. Press the # PIP button to select the first code. Hold the remote control pointed towards the device you want to switch over to. Watch the device. Now press the � (Play) or O (On/Off) button on the remote control. Wait a moment for the reaction of the device. If the device does not react, the code is incorrect. Press the # PIP button to call the next code. Press the � (Play) or O (On/Off) button again. If the device reacts, press the * EPG button to confirm the code. EPG AV def wxyz EPG wxyz wxyz PIP PIP jkl EPG TV DVD STB VCR TV DVD STB VCR AV OK VIDEO AV1 AV2 AVS VGA/XGA DVI COMP.IN AV Selection Operating additional equipment Audio output ”DIGITAL OUT” The digital audio signal is applied at the ”DIGITAL OUT” socket of the Signal Box. Here, for example, you can connect an external Dolby Digital Decoder or the Loewe sound system ”Certos/Concertos”. An analog audio signal from the TV set or a VCR or another sound source which is received at one of the Euro-AV sockets of the Signal Box is converted into a digital signal (PCM) and output at the ”DIGITAL OUT” socket. The digital signal from the DVD player is output unchanged at this socket. The digital TV sound or the sound of a DVD/CD player is only audible through a Digital Receiver or the Concertos or Certos system. AV-connection/Select device Press the key 0 on the remote control a little longer; the AV selection bar is displayed again. Select the AV connection to which the sound source, such as the DVD player, is connected. Converting the remote control in order to operate a Loewe DVD player or devices from other manufacturers You can switch over the remote control for VCRs, DVD players and Set Top Boxes if the infrared code of the equipment type is listed in the code list or is in the code memory of the RC3. Switching over is done on the one hand by entering a four-digit code and on the other hand the remote control suggests codes which you can test on the equipment. If you cannot find the equipment in the code list, try a suggestion from the remote control. Even if the manufacturer of the equipment is included in the code list, it is possible that it cannot be operated. Not all functions on the RC3 are available for this equipment. Switching over the remote control – with code input – e.g. to the Loewe DVD player Look for the code number of your equipment in the code list. The list is sorted according to equipment type – DVD, VCR, STB – and alpha- betically according to manufacturer. You will find one or more code numbers next to the manufac- turer name. Using the switch select whether you want to switch over to a VCR, DVD player or a Set Top Box. Press the END and * EPG buttons at the same time (5 secs). The display at the top left of the remote control flashes twice. Enter the four numbers from the code list one after the other (0539 for Loewe DVD player). The display flashes once after each number is entered. Twice after the last number. If the number was incorrect, the display flashes for longer. The code number has not been accepted. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 24

Set marker Switch DVD player on/off – in standby Next chapter /search forward Playback Stop V–/V+ volume quieter/louder Menu bar on, previous function active; in menu: info on/off Status display on; in menu: close menu Set picture format (TV) Menu bar on, select chapter active Menu bar on, Repeat active Menu bar on, Zoom active Select Chapter; in menu: enter digits Pause /single frame, slow motion Beginning of chapter or previous chapter /search back in menu: select Title/Chapter Table; in menu: cofirm the menu selection User interface of loaded DVD on DVD menu on; in menu: close menu Call AV selection (TV) User interface of loaded DVD on Menu bar on, select camera position active Change-over switch for operation of TV, VCR, DVD or Set Top Box abc def RADIO -Set TV DVD STB VCR REC-MENU ghi jkl mno pqrs tuv wxyz EPG AV DISC-M CARD SV TITLE C-SET PIP P+ OK P— V— V+ -List Sound off/on (mute) Switch recorder on/off – in standby Fast forward /search forwards Start playback Stop tape V–/V+ volume quieter/louder Status display Status display /in menu: close menu Set picture format (TV) Select picture and sound source Select sound /station language selection Counter reset Select station directly /in menu: enter digits Pause (still frame) /frame-by-frame advance Rewind /search backwards Call up station list /in menu: call up/confirm P+/P– select program up/down Call up VCR Menu Call AV selection (TV) Switch to Long Play /Standard Play Display/close ShowView timer Menu Display/close Timer list Change-over switch for operation of TV, VCR, DVD or Set Top Box Start recording DVD-AV �/�manual tracking /in menu: select position Reverse play /in menu: select/set Slow motion forwards /in menu: select/set Operating additional equipment Remote control RC3 for operating a DVD recorder or DVD player Set the rotary switch to ”DVD”. Using the RC3 remote control for operating a video recorder Set the rotary switch to ”VCR”. The infrared code and the functional scope for a Loewe VCR is set ex-factory. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 25

Rotating the TV set (Only possible for Spheros 32/37 HD and equipped with ”Motor Unit”). If the screen is mounted on a "Motor Unit" you can rotate it with the remote control to suit your sitting position. Launch the TV menu: Press MENU on the remote control. Select the ”Rotate TV” bar. You determine the direction of rotation right, stop or left with the arrows on the button. Close the menu. Note: Do not place any objects in the range of rotation of the TV set which could obstruct rotation or be knocked over in the process. Before activating the rotary function, make sure that the set can rotate freely and unhindered. Viewing angle, range of rotation Setting the rotation area (a maximum of +/- 40 degrees) With this menu, you can determine the maximum rotation to the left and right. Press MENU on the remote control. Highlight the ”Settings” bar. Press OK, then to ”other...” Highlight the ”Rotate TV” bar, press OK. Select line "Basic adjustment". Press the OK button. You set the desired maximum range of rotation to the right by pressing the ring (right). Rotation stops when you release the ring. The setting is saved by pressing OK . Then set the desired maximum rotation to the left by pressing the ring (left). Confirm with OK. Press END to exit the menu. Determining the switch off position Here you determine the position of the screen (TV set) which is adopted when switching off providing you have activated this function. Press MENU on the remote control. Highlight the ”Settings” bar. Press OK, then to ”other...” Highlight the ”Rotate TV” bar, press OK. The menu "Rotate TV“ appears. Select Define "Switch-off position". You set the desired switch off position to the right or left by pressing the ring. Rotation stops when you release the button. Save the "set switch-off position“ with OK. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 26

You determine whether the TV set moves back to the determined switch off position when switched off with the remote control (the set cannot be operated during this time, approx. 35 seconds). Press MENU on the remote control. Highlight the ”Settings” bar. Press OK, then to ”other...” Highlight the ”Rotate TV” bar, press OK. If you select "yes" in the line "Activate switch off position" the TV set will turn to the set position when switching off with the remote control. The TV does not rotate when switching off if "no" is selected under "Activate switch off position". The TV set stays at the last set position when it is switched off. Press END to exit the menu. Connecting Loewe sound systems Loewe Audio systems and active speaker systems • Concertos 1 • Concertos 2 • Certos with Concertos • Tremo and Dolby Digital Decoder In connection with a Loewe TV with a Loewe audio system and a Loewe speaker system you have an excellently tuned Home Cinema system. Advantages are high operating comfort, attractive design and adapted technology. The speakers and the TV set can be arranged as illustrated below, for example. The arrangement of the speakers and the television set might look as depicted below. However, the layout of the front and surround speakers should be set up in symmetry to the television set and your sitting position. The surround speakers can also be set up behind your sitting position, facing towards the front speakers. The Acoustimass® module can also be set up in another place, e.g. particularly effective behind your sitting position, but in such a way that the bass frequencies are able to radiate freely. The Concertos sound system offers you a new type of sound dimension in music and film performances with integrated electronics. Even at low volumes, you can then hear the full bass in the correct ratio to the higher and medium frequencies. Loewe offers two sound systems Concertos 1 and Concertos 2, consisting of an Acoustimass ® Module, a set of cables and the satellite speakers. If the integrated speakers of the TV set are not to be used for the center channel, then Concertos 1 with five Loewe satellite speakers can be connected. Use the integrated speakers of the TV as a center channel, then use Concertos 2 with only four satellite speakers. Connecting Concertos components: Before connecting the devices, ensure that they are switched off or pull out the mains plug. Connect the components of the Concertos system to the TV set, as shown on page 28. First use: To put Spheros into use with the Concertos system, some settings from the Sound menu of Spheros are required. In this context, please read the separate Operating Instructions ”Concertos 1 / 2 – Sound”. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 27

Center Sub L R SOURROUND D-SUB DVI-OUTPUT RC5/ RC6 DISPLAY DIGITAL L R AUDIO IN 3 L R AUDIO OUT R R CB/P AV 1 (red) (white) VA nt speaker left Front speake right Surround speaker right Surround speaker left Acoustimass®- module Connection port on the bottom of the Acoustimass® module Loewe sound systems Concertos 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 28

S-Link TV EXT Pre Out Front Center Rear Aux 2 In Out Aux 1 In System-Con. LFE LFE R L CERTOS Euro AV Bass Modul DVB In D-Aux 3 In Digital Out Digital Out D-Aux 4 In ➜ ➜ DVD UNIT Certos Master Unit Name der CD, Titel 5 DVD Quelle Song Title 4:51 P R E M I U M NK AN CS ➜ ➜ AV Signal Box ➜ DVBC NK 120-240V 50/60Hz SERVICE IR- Link SYSTEM ANT-1 ANT-2 PIP UHF/VHF AUDIO IN 2 Y IN1 AUDIO IN1 L R AV 2 ( RGB ) Center Sub L R SOURROUND DVI-INPUT D-SUB DVI-OUTPUT CONTROL RC5/ RC6 VGA DISPLAY DIGITAL L R AUDIO IN 3 L R AUDIO OUT CR/PR CB/PB IN2 OUT AV 1 ➜ ➜ L-Link ➜ Acoustimass® module nt speaker left Front spe Surround speaker right Surround speaker left Connection port on the bottom of the Acoustimass® module Loewe sound systems Certos/Concertos 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 29

Center Sub L R SOURROUND DVI-INPUT D-SUB DVI-OUTPUT CONTROL RC5/ RC6 VGA DISPLAY DIGITAL L R AUDIO IN 3 L R AUDIO OUT CR/PR CB/PB IN2 OUT AV 1 ON Line IN Power OUT OFF Bass Intensity Center to System connector 230V~50/60Hz Surr. Front Right Surr. Front Subw. Left Right Center Left Slave Master R R L C L Phase Min. Max. TV Sat 0 180 PREOUT FR FL SL SR SUB C TO TV TV EXT 12V/15mA L-Link AM GND FM (75 Ω) L L R R AUX1 IN DIGITAL IN DIGITAL OUT AUX OUT AUX 2 Connecting the DVD Preceiver Auro 8116 DT and Tremo Connecting the Loewe DVD Preceiver Auro 8116 DT to the Signal Box Spheros 32/37 HD or Xelos SL 32/37 HD When you use the Loewe DVD Preceiver in connection with a Loewe TV set, connect the Tremo loudspeaker system to the audio outputs of the DVD Preceiver. Connect the cubic socket on the DVD Preceiver to the ”Master” cubic socket on the Tremo subwoofer. Use the cubic plug cable enclosed with the DVD Preceiver Auro (2-wire cable). Plug the white plug (without kink protection) in the cubic socket on the subwoofer. If the loudspeakers of the Loewe TV set are used for center reproduction, connect the cubic socket of the TV set to the ”Slave” cubic socket on the subwoofer with the cubic plug cable. Use the cubic plug cable enclosed with the Tremo loudspeaker system. Plug the white plug (without kink protection) into the cubic socket on the subwoofer. Set the switch ”Center to” on the subwoofer to ”TV”. If on the other hand you want to use the external center loudspeaker, do not connect Slave to the TV. Set the ”Center to” switch on the subwoofer to ”Sat”. Connect the TV set (Euro AV socket 2) and the DVD Preceiver with the Euro-AV cable. Connect the TV set (Service socket) to the TV-L- Link socket of the DVD Preceiver with the L- Link cable (delivered with the DVD Preceiver) . This ensures that the Tremo loudspeaker system is switched on during radio or CD playback from the DVD Preceiver but the TV remains switched off. Connect the digital output of the TV set with the DIGITAL IN input of the Auro system with a cinch cable. This ensures that the digital audio signal for decoding is fed into the DVD Preceiver. See the ”Tremo” operating manual to find out how to connect the satellite loudspeaker. Settings on the DVD Preceiver Auro 8116DT Select the ”Tremo” loudspeaker system in the DVD menu under Settings, set the Listener/ Speaker distances and level the speakers. Also have a look at the DVD Preceiver manual (pages 12 and 13). 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 30

(DVI) with which you can show PC images on the TV screen for example. Connecting personal computers Connect the PC directly to the socket labeled "DVI" on the back of the Signal Box. The digital audio signal can be connected to the input "Digital In 1 or 2". If your PC does not have a DVI interface, please use a VGA/DVI adapter cable. This is available from electronics and computer dealers. Connect the analogue audio output of the PC to the "AUDIO IN 2" socket. The TV set can be connected to the following standards: VGA (640x480 @85Hz), XGA (1024x768 @85Hz), SVGA (800x600 @85Hz) or SXGA (1280x1024 @75Hz). DDC Function (Display Data Channel) The DDC function automatically detects graphic resolutions supported by the TV set. If you wish to use the DDC function, first connect the PC to the TV set via the VGA or DVI socket. Boot the PC. Regardless of whether the TV set is on or off, you can select the graphic resolution (e.g. XGA 1024 x 768 at 75 Hz) in the ”Properties” menu on the PC. Launch the program for displaying PC images Press the (Zero) key and ”AV Selection” appears. Choose ”VGA”/XGA” PC image settings If a PC image is displayed on the screen, you can call up the ”VGA menu”. Call up the VGA menu and… Highlight the ”Picture” line VGA menu Sound VGA geometry Info Back End Picture OK INFO MENU END Rotate TV VGA geometry Picture width Picture hor. Phase position Info Back End Input pixels Input lines Picture vert. OK INFO MENU END Automatic no yes OK AV OK OK OK OK OK OK OK Displaying PC images (VGA/DVI) Confirm In the ”Image” menu, you can select the contrast, brightness, sharpness, picture format, colour standard (not with DVI) etc. and adjust the light ratios to your personal preferences. To display pictures, you can select the format 4:3, since most camera pictures are taken in this format. For an optimum display and maximum picture focus of standards VGA and SVGA, you can select "Original" under "Picture format". In this case the exact format values of the graphic card must be known and set in the menu "VGA geometry". In the ”Sound” menu, you can set the volume of the loudspeakers or headphones, or select the tone for two-tone playback. VGA geometry settings In the VGA menu, select the line ”VGA Geometry” Launch The setting options are restricted in "DVI". Select ”Automatic yes” on a computer with a conventional graphics format. Your Spheros will automatically adjust to the supplied image format. Special graphic format may require further settings to be made: • Set the picture width • Move the picture horizontally, to the left or right • Move the picture vertically, upwards or downwards • Set the phase position to give a picture that is as jitter-free as possible • ”Input pixels” allows you to set the horizon- tal resolution of the PC image. • ”Input lines” allows you to set the vertical resolution of the PC image. Save settings Pressing the END key on the remote control hides the menu. Selection possibilities for the "COMPONENT IN" socket: Choose the menu "Connections" and set it as follows: Connections: Connection plan ➔ Device selection ➔ others ➔ Device to COMPONENT IN socket yes. After pressing OK several times, you get the menu "Connections" with the following selection possibilities: • Automatic, it is detected automatically which signal SDTV or HDTV/Pro scan is applied at the "COMPONENT IN" socket. • SDTV for PAL with 625 lines, 50 Hz interlaced or NTSC 525 lines, 60 Hz interlaced • HDTV for high definition video signals • Pro scan for 625 lines/50 Hz or 525 lines/60 Hz progressive. • With OK, you finally get the menu "Connections: Assign Audio Digital". 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 31

Problem Various menu items cannot be called (shown in gray) or the menus for the EPG and teletext modes of operation cannot be called Record and Timer are not displayed in the video menu "Connections" for example cannot be called in the video menu (grayed out) In the TV menu, the menu item “Programs” is missing and in the Main Information the item “Automatic channel search” and connections Control of the Loewe VCR with the video control bar and the timer does not work or does not work properly General problems with connecting external devices through an AV input Possible cause "Simplified operation" activated in the main information. No VCR or DVD recorder logged in and no digital recorder installed a) A timer recording is in progress (not with serial timer recording) b) You are recording from the TV set with the video bar The child lock is activated. If these menus were accessible, children could still set the programs. a) The VCR's Digital Link function is not activated or not possible b) Euro-AV cable not connected c) Video recorder not logged in a) The device is not logged in in the "Connections" menu or is connected differently to shown in the connection diagram b) The AV norm is set incorrectly c) The AV signal is set incorrectly Remedy Deactivate “Simple control” in the Main Information, press the i-key, select “Select control level” and call up with OK. Set “Simple control” to “no”. Log in VCR in the TV menu - Connections. a) Wait until the timer recording has ended or clear the timer. b) Stop recording. Deactivate program-related child lock: Switch off child lock or enter PIN in the TV menu - Settings. a) Activate Digital Link in the VCR (see operating instructions of the VCR) b) Connect the Euro-AV cable c) Log in the VCR a) Compare the connection diagram with the actual installation in the "Main information" under "Connections" and connect as shown if necessary. b) Set the correct norm. c) Set the correct AV signal. If "Automatic" is set for AV norm or AV signal, this can lead to wrong detection in the case of non-standardized signals. In this case the norm and signal must be set according to the operating instructions of the external device. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 32

Problem Connection of a decoder does not work or does not work properly No sound through the TV loudspeakers All menus appear in the wrong language Digital Link Plus does not work Various characters are displayed incorrectly in teletext Possible cause a) The signal is not decoded because the correct decoder programs have not been selected in the TV menu - Connections b) The sound is missing in decoder mode because the wrong decoder sound is allocated in the TV menu - Connections The item "Sound from..." in the Sound menu under "Sound" is not set to "TV" The wrong menu language has been set. a) The VCR has not been logged in as a Digital Link Plus device or has been connected to the wrong socket b) The Euro-AV cable is not fully wired (Pin 10 not wired) c) Some video recorders can only take over the stations from the TV in initial installation d) All or some terrestrial or cable stations are stored at station slots ≥ 99 The wrong character set is set in the teletext menu Remedy a) Follow the instructions in the TV menu - Connections again and select the appropriate decoder programs. b) Follow the instructions in the TV menu - Connections again and select the right sound source (decoder, TV or Autom.), see instructions of the decoder. Change the setting to "TV". Set your menu language: 1. Switch off picture-in-picture (PIP) and switch off all on-screen displays (END button) 2. Call the TV menu (MENU button) 3. Select the last menu item and press OK 4. Select the last menu item on the last page and press the OK button 5. Now select the right language and.... 6. ... confirm with OK. a) Log in the Digital Link Plus VCR under "Connections" and connect according to the diagram. b) Change the Euro-AV cable c) Reinstate the original state (ex-factory) of the VCR (see operating instructions of the VCR) d) Sort the terrestrial and cable stations so that they are between 1 and 99. Set the right character set: Teletext menu - Settings - Character set - Standard or the appropriate character set. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 33

Spheros 37 HD Xelos SL 32 HD Xelos SL 37 HD Article no. 64406 64451 63443 63444 Dimensions (cm) LCD display without base W x H x D 84 x 58,5 x 9 99 x 68 x 9 84,5 x 58,5 x 8,5 99 x 68 x 9 Display technology TFT-LCD TFT-LCD TFT-LCD TFT-LCD Image format 16:9 16:9 16:9 16:9 Image diagonal 80 cm 94 cm 80 cm 94 cm Pixel format 1366 x 768 1366 x 768 1366 x 768 1366 x 768 Contrast ratio 800:1 800:1 800:1 800:1 Viewing angle horizontal./vertical 170 ° 170 ° 170 ° 170 ° Weight (kg) 22,5 31 18,1 21,5 Power cons. (Watt) 135 170 135 170 Relative atmospheric humidity 35 ... 75% no condensation Ambient temperature 0º – 40º Celsius Spheros Signal Box (with PhotoViewer) Protection class 2 Chassis name S 2550 Dimensions (cm) 43 x 7,5 x 37 (W x H x D) Weight (kg) 6.2 Power supply 120 V to 240 V / 50-60Hz Power consumption In operation up to 30 Watt Standby < 3 Watt Signal Box (with PhotoViewer and Digital Recorder) Protection class 2 Chassis name S 2550 Dimensions (cm) 43 x 10.5 x 37 (W x H x D) Weight (kg) 8.2 Power supply 120 V to 240 V / 50-60Hz Power consumption In operation up to 45 Watt Standby < 3 Watt Full Digital AMD / DNC adjustable Tuner VHF/UHF/ cable (Hyper band 8 MHz) 42 MHz to 860 MHz Station slot memory 220 with Digital TV ✳ 1470 TV standards PAL-B/G, PAL-D/K, PAL-I, PAL-L PAL M/N, PAL 60 Secam B/G, D/K, L NTSC / NTSCV Teletext Hi-Text (Level 2.5) Sound norms mono/stereo/2-sound Nicam B/G, L, I Multi channel (optional) Dolby Digital/PCM/ MPEG Rated audio power 2 x 15 Watt / 6 Ohm Audio music output 2 x 40 Watt / 6 Ohm Speakers 2 closed boxes Tweeter 2 x 20 mm Bass 2 x 75 mm Connections (Signal Box - front): Mini-DIN S-Video IN (AVS)S-VHS / Hi 8 Cinch Video IN (AVS) VHS / 8 mm Cinch Audio IN L / R Jack 6.3 mm headphones 32-200 Ohm Connections (Signal Box - rear): IEC socket 75 Ohm Antenna / cable / PIP ✳ ANT 1 / 2 socket F 75 Ohm EURO-AV 1: Video IN Y/C (S-VHS / Hi 8) (VHS / 8 mm) Video OUT Y/C (S-VHS / Hi 8) CVBS (VHS / 8 mm) Audio IN/OUT L / R EURO-AV 2: Video IN Y/C (SVHS / Hi 8) CVBS (VHS / 8 mm) RGB Video OUT Y/C (SVHS / Hi 8) (Only for S-VHS Link Plus) CVBS (VHS / 8 mm) Audio IN/OUT L / R Component IN: Cinch Y signal Cinch Cr/Pr signal Cinch Cb/Pb signal 2xCinch L / R AUDIO OUT 2xCinch L / R AUDIO IN 1 Jack socket 3.5 mm AUDIO IN 2 2xCinch L / R AUDIO IN 3 Cinch input socket IN 1 Digital sound Cinch input socket IN 2 Digital sound Cinch output socket OUT Digital sound SYSTEM-Bush, 9 poles AUDIO Infrared link Jack socket 3.5 mm RC5/RC6 Jack socket 2.5 mm Service-socket 8-pin Connection DVI/VGA input 26-pin Sub-D VGA-Loewe Online input 15-pin Sub-D CONTROL Online Plus 9-pin Sub-D Connection LCD display 26-pin Sub-D Connection LCD display DVI OUTPUT ✳ Only in the set version with „Digital-TV kit 2 Sat/Twin-Sat CI". 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 34

Separate Online Plus Box for comfortable use of Internet, e-mail, etc. on the TV. Sound-System Concertos Concertos 2 Exclusive 5.1 Digital-Surround Sound System. The center channel is reproduced by the integrated loudspeakers of the Spheros. Certos DVD/CD player with radio and Dolby Digital/ dts-decoder in unusual design. Dolby Digital (AC3) For decoding audio signals from the DVD player, TV set or other audio equipment to a 5.1 playback with active speakers. Loewe audio systems (Auro and Tremo) and active loudspeaker systems A combination of a Loewe TV set, a Loewe audio system and a Loewe loudspeaker system provides an excellently adapted Home Cinema system with the advantages of high operating comfort, matching design and adapted technology. Wireless Home Automation For controlling the house lighting circuit, shutters etc. Accessories System cable from the Signal Box to the flat screen 10 meters long, article number 89236 M25. Wall holder WM 51 The flat screen can be fixed to the wall and tilted up to 5 degrees. Flat-TV F-Stand 3 TV set as a standing unit and mechanically rotatable. Motor Unit (only for Spheros 32 HD and 37 HD) Motorized rotating table stand (+/– 35 degrees), can be controlled with the remote control. Racks Xelos Rack With two shelves for video recorders or DVD players. System Cube 1/2 (only for Spheros 32 HD and 37 HD) Rack system with motor unit for rotating the TV set and shelves for VCRs, DVD players etc. (in conjunction with the Spheros Cube Adapter). Cube Adapter Set Adapter for mounting the set on the rack systems System Cube 1/2. The code number 3001 cancels out a secret code and with it the child lock. Please keep it in a safe place. 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 35

129 Palmer Street AUS - Richmond, Victoria 3121 Tel. 03–94 29 08 22 Fax 03–94 29 08 33 Benelux Loewe Opta Benelux NV/SA Uilenbaan 84 B–2160 Antwerpen Tel. 0902–88 00 2 Fax 030–280 33 27 Loewe Opta Nederland B.V. Ravenswade, 54A1 NL–3439 LD Nieuwegein (Utrecht) Tel. 0900–280 33 27 Fax 030–803 327 Česká republika TIPA sdruzení Dolní nám. 9 CZ–25069 Klicany/Pruha CZ–746 01 Opava 1 Tel: 0653-62 49 44 Fax: 0653-62 31 47 GUS Service Center Loewe ul. Verkhnyaya Maslovka, d. 29 RUS–125083 Moscow Tel. 095–212 50 43, 956 67 64 Fax 095–212 47 10 Cyprus Pangratis Liveras & Son Ltd P.O. Box 3426 Liveras Building 7 Ajax Street Saint Omologite CY–Nicosia Tel. 02–42 05 10 Fax 02–42 87 70, 42 06 53 Danmark Kjaerulff 1 Development A/S C.F. Tietgens Boulevard 19 DK–5220 Odense Sø Danmark Tel. +4566–13 54 80 Fax +4566–13 54 10 Deutschland Loewe Opta GmbH CustomerCareCenter Industriestraße 11 D–96317 Kronach Tel. 01801–22 25 63 93 Fax 09261–99 500 España Gaplasa S.A. Conde de Torroja, 25 E–28022 Madrid Tel. 91–748 29 60 Fax 91–329 16 75 France Sorep Import S.A. 11 rue de la Durance F–67029 Strasbourg Cédex 1 Tel. 03–88 79 72 50 Fax 03–88 79 72 59 Great Britain Linn Products Limited PO Box 8465 Prestwick UK – KA 7 2YF Tel. 01292–47 15 52 Fax 01292–47 15 54 Hellas SOUND HELLAS S.A. Kleanthous Str. 10 GR–54642 Thessaloniki Tel. 031–856 100 Fax 031–856 300 Helvetia Telion AG Rütistrasse 26 CH-8952 Schlieren Tel. 01–732 15 11 Fax 01–730 15 02 Italia General Trading Trust SpA Via Vittorio Emanuele, 33 I–50041 Calenzano (FI) Tel. 055–88 11 71 Fax 055–88 11 740 Magyarország Basys Magyarorszagi KFT Epitokutja 2-4 H–2040 Budaörs Tel. 023–415 637-121 Fax 023–415 182 Norge CableCom AS Østre Kullerød 5 N–3214 Sandefjord Tel. 033–48 33 48 Fax 033–44 60 44 Malta Mirage Holdings Ltd Flamingo Complex Cannon Road M–Qormi Tel. 49 71 82 Fax 44 59 83 Österreich Robert Bosch AG Postfach 146 A–1011 Wien Tel 01–79 72 24 500 Fax 01–79 72 24 599 Polsko Piotech ul. Boh. Getta Warszawskiego 18 PL–81-609 Gdynia Tel. 058 62 43 467 Fax 58 62 45 009 Portugal Videoacustica Comercio e Representacoes de Equipamentos Electronicos S.A. Estrada Circunvalacao Quinto do Paizinho, arm. 5 P–2795-632 Camaxide Tel. 21–42 41 770 Fax 21–88 0 93 Sverige Canseda AB Amalia Jönssons Gata 19 S–42131 Västra Frölunda Tel. 031–70 93 760 Fax 031–47 65 15 Slovenija Jadran Trgovsko Podjetje Partizanska cesta 69 SL–6210 Sezana Tel. 067–391 402 Fax 067–391 400 Turkey Enkay Elektronik Servis Müdürlügü Ambarlar Cad: No: 3/C Zeytynburmu / Istanbul Tel. 0212–582 36 69 Fax 0212–671 80 39 Service Adressen/addresses/adresses/indirizzi/direcciones/adresy Printed in Germany 01.2005 Subject to modification 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 36

AKI 0718 Akira 0699 Alba 0717 0699 0713 0723 0695 All-Tel 0790 Amitech 0770 Amstrad 0713 Apex Digital 0672 Audiosonic 0690 AWA 0730 Black Diamond 0713 Blaupunkt 0717 Blue Sky 0699 0695 0713 0672 0651 Boman 0783 Brain Wave 0770 Brandt 0651 0551 Bush 0699 0690 0689 0717 0713 0818 0695 0831 0723 C-Tech 0768 Cambridge Audio 0696 Cambridge Soundworks 0696 CAT 0699 Celestial 0672 Centrex 0672 1004 Centrum 0713 cineULTRA 0699 Classic 0730 Clatronic 0788 Clayton 0713 Coby 0730 Conia 0672 Crown 0770 0651 0690 Cybercom 0831 CyberHome 0714 0816 Cytron 0716 0651 0705 Daewoo 0770 0705 0714 Daewoo International 0699 Dansai 0770 0783 Dantax 0723 DEC 0699 0818 Decca 0770 Denon 0490 0634 Denver 0699 0788 Denzel 0665 Diamond 0651 0768 0723 Digihome 0713 digiRED 0717 Digitrex 0672 DiK 0831 Dinamic 0788 DiViDo 0705 DK digital 0831 DMTECH 0783 0790 Dragon 0831 Dual 0665 0651 0713 0730 0783 0790 0831 E-Boda 0723 Eclipse 0723 Electrohome 0770 Elin 0770 Elta 0690 0770 0788 0790 Emerson 0591 0705 Enzer 0665 Ferguson 0651 Finlux 0741 0770 0783 Firstline 0651 Funai 0695 GE 0717 Global Solutions 0768 Global Sphere 0768 Go Video 0783 GoldStar 0591 0741 Goodmans 0651 1004 0790 0690 0783 0723 0818 Graetz 0665 Grandin 0716 Grundig 0539 0695 0651 0775 0705 0790 0713 0670 0723 Grunkel 0770 H&B 0818 0713 Haaz 0768 Hanseatic 0741 HCM 0788 HDT 0705 HE 0730 Henß 0713 Hitachi 0664 0665 0573 Hiteker 0672 Home Electronics 0730 Hyundai 0783 Ingelen 0788 ISP 0695 Jeken 0699 JMB 0695 JVC 0623 0539 0503 1901 1940 Karcher 0783 Kendo 0699 Kenwood 0534 0490 0737 Kiiro 0718 0770 Kingavon 0818 Kiss 0665 Koda 0818 Koss 0651 Lawson 0705 0716 0768 Lecson 0696 Lenco 0699 0651 0770 0818 Lenoxx 0690 Lexia 0699 LG 0591 0741 1906 Lifetec 0651 Limit 0716 0768 Loewe 0539 1922 LogicLab 0768 Logix 0705 0783 Lumatron 0705 Luxman 0573 Luxor 1004 Magnavox 0503 0818 Magnex 0723 Manhattan 0705 Marantz 0539 Mark 0713 Matsui 0651 0695 MBO 0690 0730 MDS 0699 Medion 0651 0783 0716 0831 Memorex 0831 Metz 0571 0713 MiCO 0723 Codelist RC3 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 37

Palladium 0695 Palsonic 0689 0672 Panasonic 0490 1908 Panda 0783 Philips 0539 0646 0503 1914 Phonotrend 0699 Pioneer 0571 0631 1900 1902 Pointer 0770 Powerpoint 0718 Proline 0651 0672 0790 1004 Proscan 0522 Prosonic 0699 Provision 0699 Radionette 0741 Raite 0665 Rank Arena 0718 RCA 0522 0651 REC 0689 0490 Red Star 0770 0788 Reoc 0768 Revoy 0699 Roadstar 0699 0690 0689 0713 0818 Rotel 0623 Rowa 1004 Saba 0651 Sabaki 0768 Salora 0741 Samsung 0573 0490 Sansui 0695 0716 0768 0723 0770 Sanyo 0670 0695 0790 Scan 0705 ScanMagic 0730 Schaub Lorenz 0788 0770 Schneider 0651 0783 0705 0790 0788 Scientific Labs 0768 Scott 0718 0651 0672 SEG 0665 0713 0768 Shanghai 0672 Sharp 0630 0695 Sherwood 0717 0741 0633 Shinco 0717 Silva 0788 SilvaSchneider 0831 Singer 0690 0716 0723 Skymaster 0730 0768 Slim Art 0770 SM Electronic 0730 0768 0690 Smart 0718 0705 0713 Sonashi 0716 Sony 0533 0573 1903 1904 Soundmaster 0768 Soundmax 0768 Soundwave 0783 Standard 0651 0768 Starmedia 0818 Sunwood 0788 Supervision 0730 0768 SVA 0672 Synn 0768 Tandberg 0713 Tatung 0770 Teac 0717 0741 0571 0768 0591 0790 Technics 0490 1908 Technika 0770 Techwood 0713 Tensai 0690 0651 Tevion 0651 0768 Theta Digital 0571 Thomson 0551 0522 Tokai 0665 0788 Tokiwa 0705 0716 Toshiba 0503 Umax 0690 United 0788 0730 0790 Universum 0741 0713 0591 Venturer 0790 Vieta 0705 Voxson 0730 0831 Walkvision 0717 Welkin 0831 Wesder 0699 Wharfedale 0696 0723 Windy Sam 0573 XBox 0522 XLogic 0770 0768 XMS 0788 0689 Yamada 1004 Yamaha 0490 0539 0646 Yamakawa 0665 0710 0765 Yelo 0718 Yukai 0730 Zenith 0503 0591 0741 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 38

0041 Akai 0106 0315 0041 0352 0240 Akashi 0072 Akiba 0072 Akura 0072 0041 Alba 0278 0072 0209 0352 0000 0315 0348 0081 Allorgan 0240 Allstar 0081 Amstrad 0000 0278 0072 Anitech 0072 Ansonic 0000 Aristona 0081 ASA 0037 0081 Asuka 0072 0037 0081 0000 0038 Audiosonic 0278 AVP 0352 0000 AWA 0037 0278 0642 0043 Baird 0106 0278 0104 0041 0000 Basic Line 0278 0209 0072 Bestar 0278 Black Diamond 0642 0278 Black Panther 0278 Blaupunkt 1562 0226 0081 Blue Sky 0037 0209 0348 0072 0352 0278 0000 Bondstec 0072 Brandt 0041 0320 Brandt Electronique 0041 Brinkmann 0209 0348 Bush 0072 0278 0315 0209 0352 0000 0348 0081 Carena 0209 0081 Carrefour 0045 Casio 0000 Cathay 0278 CGE 0041 0000 Cimline 0072 0209 Clatronic 0072 0000 Combitech 0352 Condor 0278 Crown 0278 0072 Cyrus 0081 Daewoo 0278 0642 0209 0348 0352 0045 Dansai 0072 0278 Daytron 0278 de Graaf 0042 0081 0104 0048 Decca 0000 0041 0081 0067 0348 0209 Deitron 0278 Denko 0072 Diamant 0037 Domland 0209 Dual 0041 0081 0278 0000 Dumont 0000 0081 0104 Elbe 0278 0038 Elcatech 0072 Elin 0240 Elsay 0072 Elta 0072 0278 Emerson 0072 0045 0000 ESC 0278 0240 Etzuko 0072 Fast 0897 Ferguson 0041 0320 0000 0278 Fidelity 0000 0072 0240 Finlandia 0104 0081 0042 0000 0048 0384 Finlux 0000 0081 0104 0042 Firstline 0072 0209 0348 0043 0037 0045 0042 0278 Fisher 0047 0104 0038 Flint 0209 Frontech 0072 Fujitsu 0000 Funai 0000 Galaxi 0000 Galaxis 0278 GE 0320 GEC 0081 General Technic 0348 Genexxa 0104 Goldhand 0072 GoldStar 0037 0000 Goodmans 0000 0072 0240 0278 0037 0081 0348 0209 0352 0642 Graetz 0041 0104 0240 Granada 0104 0048 0081 0240 0037 0226 0042 0000 Grandin 0072 0037 0000 0278 0209 Grundig 0081 0347 0226 0320 0348 0072 Haaz 0348 0209 Hanimex 0352 Hanseatic 0037 0209 0278 0081 0038 Harwood 0072 HCM 0072 Hinari 0072 0209 0352 0041 0278 0240 Hisawa 0209 0352 Hischito 0045 Hitachi 0042 0041 0000 0240 0081 0104 0384 Hornyphone 0081 Hypson 0072 0209 0278 0352 Imperial 0000 0240 Ingersoll 0209 0240 Inno Hit 0240 0278 0072 Interbuy 0037 0072 Interfunk 0081 0104 Internal 0278 International 0278 0037 Intervision 0000 0278 0037 0209 0348 Irradio 0072 0037 0081 ITT 0106 0041 0384 0104 0240 ITT Nokia 0048 ITV 0278 0037 JMB 0209 0352 Joyce 0000 JVC 0041 0067 0384 Kaisui 0072 Kambrook 0037 Karcher 0278 Kendo 0106 0209 0315 0348 0072 0037 Kenwood 0041 0038 KIC 0000 Kimari 0047 Kneissel 0352 0209 0348 0037 Kolster 0209 0348 Korpel 0072 Kuba 0047 Kuba Electronic 0047 Kuwa 0226 Kyoto 0072 Lenco 0278 Leyco 0072 LG 0037 0000 0278 Lifetec 0209 0348 Loewe 0081 1562 0226 0866 0037 Logik 0240 0072 0106 0209 Lumatron 0278 Luxor 0106 0043 0072 0104 0047 0048 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 39

Marantz 0081 0038 0209 Mark 0278 Matsui 0209 0348 0037 0240 0352 0000 Mediator 0081 Medion 0209 0348 0352 Melectronic 0000 0037 0038 Memorex 0104 0000 0037 0048 0047 Memphis 0072 Metz 1562 0347 0081 0226 0037 Micormay 0348 Micromaxx 0209 Migros 0000 Mitsubishi 0043 0067 0081 Multitec 0037 Multitech 0000 0072 0104 Murphy 0000 Myryad 0081 NAD 0104 National 1562 0226 NEC 0041 0038 0067 0104 0037 Neckermann 0041 0081 Nesco 0072 0000 0352 Neufunk 0209 Nikkai 0072 0278 Nokia 0104 0106 0315 0041 0278 0240 0048 0042 0081 Nordmende 0041 0384 0320 0067 NU-TEC 0209 0348 Oceanic 0000 0048 0106 0081 0104 0041 Okano 0315 0209 0348 0072 0278 Orbit 0072 Orion 0209 0352 0348 Orson 0000 Osaki 0000 0037 0072 Osume 0072 Otake 0209 Otto Versand 0081 Palladium 0072 0315 0037 0041 0209 0240 0348 0432 Palsonic 0072 0000 Panasonic 1562 0226 Pathe Cinema 0043 Pathe Marconi 0041 Perdio 0000 0209 Philco 0038 0072 Philips 0081 0384 Phoenix 0278 Phonola 0081 Pioneer 0067 0081 0042 Portland 0278 Prinz 0000 Profitronic 0081 0240 Proline 0000 0320 Prosco 0278 Prosonic 0209 0278 0000 Protech 0081 Provision 0278 Pye 0081 Quasar 0278 Quelle 0081 Radialva 0037 0072 0081 0048 Radiola 0081 Rank 0041 Reoc 0209 0348 0278 Rex 0041 0384 RFT 0072 Roadstar 0240 0072 0037 0278 Royal 0072 Saba 0041 0320 0384 0278 Saisho 0209 0348 Salora 0043 0106 0104 Samsung 0240 0432 Sansui 0041 0067 0106 0072 0348 Sanyo 0104 0047 0048 0067 Saville 0352 0278 0240 SBR 0081 Scan Sonic 0240 Schaub Lorenz 0041 0104 0000 0106 0315 Schneider0072 0000 0037 0081 0278 0240 0042 0897 Seaway 0278 SEG 0072 0240 0278 0642 0081 SEI 0081 Sei-Sinudyne 0081 Seleco 0041 0384 0037 Sentra 0072 Setron 0072 Sharp 0048 0037 0569 Shintom 0072 0104 Shivaki 0037 Siemens 0037 0104 0081 0320 0347 Siera 0081 Silva 0037 Silver 0278 Singer 0045 Sinudyne 0081 0209 Smaragd 0348 Sonitron 0047 Sonneclair 0072 Sonoko 0278 Sonolor 0048 Sontec 0037 0278 Sony 0032 0106 Soundwave 0037 0209 0348 Ssangyong 0072 Standard 0278 Starlite 0037 0104 Stern 0278 Sunkai 0209 0348 0278 Sunstar 0000 Suntronic 0000 Sunwood 0072 Supra 0037 0240 Symphonic 0000 0072 T+A 0226 Taisho 0209 Tandberg 0278 Tashiko 0000 0048 0240 0081 0037 Tatung 0000 0041 0081 0048 0043 0209 0348 0352 Teac 0072 0041 0000 0278 0642 0037 0081 0307 TEC 0278 0072 Tech Line 0072 TechniSat 0348 0209 Teleavia 0041 Telefunken 0041 0320 0384 0278 Teletech 0072 0278 0000 Tenosal 0072 Tensai 0000 0037 0072 Tevion 0348 0209 Thomson 0320 0041 0067 0384 0278 Thorn 0041 0104 0037 Thorn-Ferguson 0320 Tokai 0072 0037 0041 0104 Tokiwa 0072 Topline 0348 Toshiba 0045 0041 0384 0043 0081 Towada 0072 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 40

0278 Universum 0000 0081 0240 0037 0106 0348 0209 0104 Victor 0067 Watson 0081 0352 0278 0642 Weltblick 0037 Yamaha 0041 Yamishi 0072 0278 Yokan 0072 Yoko 0037 0072 0240 ZX 0209 SAT (STB) @sat 1300 ABsat 0668 0123 1323 0710 ADB 0642 Adcom 0200 AGS 0668 0710 Akai 0200 Akena 0668 Alba 0455 0713 Allsat 0200 1017 1043 Alltech 0713 Alpha 0668 0200 Altai 0396 Amitronica 0713 Ampere 0396 0132 Amstrad 0847 0713 0742 0396 0132 0882 0885 0863 0501 0795 1113 Anglo 0713 Ankaro 0713 AntSat 1017 1083 Apollo 0455 Arcon 1205 1043 0834 0132 1075 Armstrong 0200 Asat 0200 ASLF 0713 AssCom 0853 Astacom 0668 0710 Aston 1129 Astra 0607 0713 Astro 0133 0173 0501 0658 0607 1113 1099 1100 0200 Athena 0668 Atlanta 0871 Aurora 0879 Austar 0863 0642 0497 0879 1176 Avalon 0396 Axiel 0668 0710 Axis 1111 0834 Beko 0455 Bentley Walker 1017 Blaupunkt 0173 Blue Sky 0713 0885 Boca 0132 0713 Boston 0132 0710 0668 Broco 0713 BskyB 0847 1175 BT 0668 0710 Bubu Sat 0713 Cambridge 0501 Canal Satellite 0853 Canal+ 0853 Cherokee 0123 0710 1323 Chess 0157 0605 0713 1085 CityCom 1176 0115 0607 0299 Clemens Kamphus 0834 0396 Cobra 0396 Colombia 0668 0132 Columbia 0132 Columbus 0668 Comag 0132 Condor 0607 Connexions 0396 Conrad 0607 0573 0115 0501 Conrad Electronic 0607 0713 Cryptovision 0455 0795 Cyrus 0200 D-box 1127 1114 0723 Daeryung 0396 Daewoo 1296 0713 Delfa 0863 Deltasat 1075 DGTEC 1242 Digatron 1294 Digenius 0299 Digiality 0607 Digipro 1105 DigiQuest 0863 Discoverer 0605 0157 Discovery 0668 0710 Diseqc 0710 Distratel 0084 0885 1205 Distrisat 0200 DMT 1075 DNT 0200 0396 DREAM multimedia.TV 1237 DStv 0642 0879 Echostar 0610 1169 0871 0167 0853 1086 1200 0454 0396 0713 0668 0511 0453 Einhell 0132 0713 0501 Elap 0713 1129 0668 0710 Elsat 0713 Elta 0200 Emme Esse 0871 Engel 1017 0713 EP Sat 0455 Eurieult 0084 0885 0882 Eurocrypt 0455 Europa 0863 0607 0501 0200 Europhon 0299 0607 Eurosky 0607 0132 0299 0115 0114 0501 Eurostar 0607 0115 Fenner 0668 0157 0605 0713 Ferguson 0455 Fidelity 0501 Finlandia 0455 Finlux 0573 0455 Flair Mate 0713 Force 1101 Fortec Star 1017 1083 Foxtel 0879 0720 0455 0497 0795 1176 Fracarro 0871 0668 Freecom 0501 0173 Freesat 0882 FTEmaximal 0713 0863 Fuba 0396 0173 0573 0115 0299 Fugionkyo 1105 Galaxis 1111 1101 0834 0863 1176 0853 0115 0879 Garnet 1075 GF 0834 1043 GF Star 1043 GOD Digital 0200 Goldbox 0853 Goldvision 1017 Gooding 0571 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 41

0750 0879 0885 0853 0501 1297 1330 Hanseatic 0605 1099 1100 Hänsel & Gretel 0132 0607 Hauppauge 1294 HDT 1011 Heliocom 0607 Helium 0607 Hirschmann 0396 0882 1113 1111 0173 0573 1085 0299 0501 0710 0607 0668 Hitachi 0455 HNE 0742 0132 Houston 0668 0396 Humax 1176 0863 Huth 0132 0607 1017 1075 Hyundai 1011 1159 1075 ID Digital 1176 0863 Imex 0084 Ingelen 0396 0882 International 0132 Interstar 1105 1017 Intervision 0628 0607 Invideo 0871 IRTE 0609 Italtel 0871 ITT Nokia 0573 0455 0723 JOK 0710 JVC 0571 K-SAT 0713 Kamm 0713 Kaon 1300 KaTelco 1111 Kathrein 0658 0249 1057 0173 1221 0200 0713 0668 0742 0123 0115 1323 0710 Kathrein Eurostar 0115 Kiton 0114 Klap 0668 0710 Konig 0607 Koscom 0834 1043 Kreiling 0658 0249 0114 Kreiselmeyer 0173 Kyostar 0132 L&S Electronic 1043 Labgear 1296 LaSAT 0607 0115 0132 0157 0299 Lenco 0713 0115 0607 Lenson 0501 Lexus 0200 LG 1075 Lifesat 0605 0299 1043 0713 Logix 1017 1075 Lorenzen 0299 1294 0607 0742 0132 Luxor 0573 0501 M&B1 0605 Manata 0710 0668 0713 Manhattan1083 0455 0710 0668 0834 1017 Marantz 0200 Maspro 0750 0713 0173 0571 Matsui 0571 0710 0173 Max 0607 MB 0605 Mediabox 0853 Mediacom 1206 MediaSat 0501 0853 Medion 0713 0299 1043 Medison 0713 Mega 0200 Metronic 0713 1215 0084 0885 1205 Metz 0173 Micro 0607 0501 0713 Micro electronic 0713 Micro Technology 0713 Micromaxx 0299 Microtec 0713 Minerva 0571 Mitsubishi 0455 Morgan’s 0200 0713 0132 Motorola 0856 Multichoice 0642 0879 Multitec 0157 Myryad 0200 Mysat 0713 Netgem 1322 Neuhaus 0501 0713 0834 0607 Neusat 0713 0834 Nikko 0713 0723 0200 Nokia 1023 1114 0751 1127 0723 0853 0573 1223 0455 1723 1310 1312 Nordmende 0455 Nova 0879 OctalTV 1294 Okano 0668 OnDigital 0751 0329 0241 0867 0133 Optex 0834 Optus 0879 0853 Orbitech 1099 1100 0200 0501 0157 Origo 0497 Ouralis 1205 Oxford 0668 Pace 0455 0847 0887 1175 0241 0867 0123 1323 0791 0795 0720 0497 0200 0853 0710 1423 Packsat 0710 Palcom 0299 Palladium 0571 0501 Palsat 0501 Panasat 0879 0615 Panasonic 0847 1104 0455 1320 Panda 0455 0607 0173 0834 Patriot 0668 Philips 0200 1114 0853 0455 0750 0710 0668 0571 0173 0133 1336 Phonotrend 0863 1017 1200 Pioneer 0329 0853 0352 Planet 0871 0396 Polytron 0396 Praxis 0511 Preisner 0132 0396 1101 1113 Premiere 0853 1114 1127 0723 1111 1176 1195 1100 0249 0658 1435 Primacom 1111 Profile 0668 0710 Promax 0455 Prosat 0628 Prosonic 0742 Pye 0571 Pyxis 0834 Quadral 0628 0668 0710 1323 Quelle 0607 0742 0115 Radiola 0200 Radix 0396 1113 0882 RFT 0200 Roadstar 0713 Rover 0628 0713 Saba 0710 0885 0115 0607 Sabre 0455 Sagem 0820 1114 1253 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 42

1293 1292 SAT 0501 Sat Control 1300 Sat Partner 0501 Sat Team 0713 Satcom 0605 0607 Satec 0713 0834 Satline 0628 Satstation 1083 Schneider 0710 0668 0157 1206 Schwaiger 0605 0157 0607 0885 1111 0132 1075 SCS 0115 0299 Seemann 0396 SEG 0605 0742 0114 1087 Seleco 0871 Septimo 1205 0885 Siemens 0173 Skantin 0713 Skinsat 0501 SKR 0713 Sky 0847 0856 0887 1014 SKY+ 1175 Skymaster0713 0605 0157 1200 1085 1075 0628 Skymax 0200 SkySat 0157 0605 0713 SL 0132 0742 SM Electronic 0157 0713 1200 1075 1085 Smart 0132 0299 1101 0882 0396 1113 0115 0713 Sony 0282 0847 0853 0455 SR 0132 Starland 0713 Strong 0879 0853 1105 1159 1300 Sunsat 0713 Sunstar 0132 Tantec 0455 Tatung 0455 Teac 1322 Tecatel 1200 TechniSat 0200 1099 1100 1195 0501 1322 Technosat 1206 Technowelt 0607 0885 Techsan 1017 Techwood 0114 Telasat 0605 0115 0607 Teleciel 1043 Telecom 0713 Telefunken 0710 Teleka 0396 0750 0501 0607 0834 Telesat 0605 0607 Telestar 0501 1099 1100 0114 0200 0157 Teletech 0114 Televes 0455 0501 0132 Thomson 0455 0713 0853 0115 0607 1291 0820 0668 0710 1046 Thorn 0455 Tokai 0200 Tonna 0455 0668 0501 0713 0834 Topfield 1206 Toshiba 0455 TPS 0820 1253 Triasat 0501 Triax 0501 0115 0200 0396 0713 0853 0114 1296 1291 0132 Turnsat 0713 Twinner 0132 0713 UEC 0879 Uher 0157 Unisat 0200 Universum 0173 0571 0607 0299 0115 0742 1087 Van Hunen 0299 Variosat 0173 Ventana 0200 Vestel 0742 VH-Sat 0299 Viasat 1323 1023 0820 Visionic 1105 Visiosat 0710 0713 Wetekom 0157 0605 0501 Wewa 0455 Wisi 0173 0396 0299 0455 0501 0607 0834 Worldsat 0710 0114 0123 0668 XCOM 0123 0668 XSat 0668 0713 0123 Xtreme 1300 YES 0887 Zehnder 1075 0742 0114 0115 0419 Zenith 0856 Zeta Technology 0200 Zinwell 1176 Cable Box (STB) Austar 0276 BT 0003 Canal Plus 0443 Comcrypt 0443 Decsat 0423 Filmnet 0443 France Telecom 0817 General Instruments 0276 Jerrold 0003 0276 Kabelvision 0003 Macab 0817 Melita 0003 MNet 0443 Mr Zapp 0817 Noos 0817 NTL Cabletell 0276 Ono 1068 Optus 0276 1060 Pace 1068 1060 Philips 0817 0286 PVP Stereo Visual 0003 Sagem 0817 Tele+1 0443 Telepiu 0443 Tudi 0286 United Cable 0003 Visiopass 0817 31963_021_RC3_GB 14.01.2005, 10:40 Uhr 43