Logitech HD 200a Getting Started Manual

Logitech HD 200a Powerline Starter Kit 2 Network adapters 2 Ethernet cables 2 wall spacers Documentation Power-strip Warning! Do NOT plug the network adapter into a surge protector or power strip as they interfere with network communication. The network adapter(s) must be plugged directly into your wall outlet. Surge protectors are built-in to the network adapter and protect your devices. 1 Logitech HD 200a Powerline Starter Kit 1) Plug one end of the Ethernet cable connector into the network adapter. 1a) Add the optional wall spacer. 1b) Plug the network adapter into the power outlet. 2) Connect the other end of the Ethernet cable connector into an open port on your router. 2 1) Take the second network adapter and plug one end of the Ethernet cable connector into the network adapter. 1a) Add the optional wall spacer. 1b) Plug the second network adapter into the power outlet by the device you will be connecting to. 2) Connect the other end of the Ethernet cable connector into the ethernet port of your device (i.e. gaming console, laptop, etc.). 3 Turn the device on and test. 1 INTERNET 2 3 4 1 1b 2 * Off 2 Welcome. Thank you for purchasing Logitech HD Powerline products. With Logitech powerline home products you can easily network devices in your home using your home’s existing electrical wiring. No new wires to run, no networking hassles. Logitech HD 200a Powerline Starter Kit 1a 1 1b 1a Quick-start guide Logitech HD Powerline 200a Networking Starter Kit Logitech HD Powerline 200 Networking Adapter System Requirements & Support Guide (not included)

© 2010 Logitech. All rights reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. All other trademarks are the property of their respective owners. Logitech® assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice. 620-003174.003 www.logitech.com Software and advanced confguration Logitech HD Powerline products come with 128 bit encryption to secure the power- line network. To confgure your network with advanced network security, please download the Logitech Powerline Utility software at www.Logitech.com > Suppport > Downloads. Customer Support 1.888.469.4543 [U.S.] LED Status Section Network Adapter Diagnostic LEDs What do these LEDs tell me? Network Status LEDs What do these LEDs tell me? [Green] Trafc and data is fowing [Yellow] Connection with Ethernet/LAN [Green] Adapter getting power [Blue] Network trafc is fowing LED On/Of Toggle Switch How do I turn the LEDs of? OFF ON LED Use the switch on the side of the network adapter to disable the diagnostic and status LEDs. Powerline adapters use existing wall wiring Logitech HD 200 Powerline Adapter (sold separately) Logitech HD 200 Powerline Adapter (sold separately) Logitech HD 200a Powerline Starter Kit