Logitech T631 Setup Manual
Text of the manual
Get to know your mouse
Touch
surface
Status
light
Micro-USB
charging
cable
On
2
1
Of
Connect
Bluetooth
Connect
button
Bluetooth
Easy
Switch
On/Off switch
Micro-USB
port
English 3
Set up Bluetooth
2. Select Bluetooth
channel
3. Press Connect
On your mouse
The status
light blinks
blue rapidly to
indicate the
mouse is ready
for pairing with
a Mac
Slide the
Bluetooth
Easy Switch
to position
1 or 2
Slide the switch
to the On
position
1. Power on
The status light
blinks blue rapidly
while the mouse
is discoverable—
about three minutes
4 English
Set up Bluetooth
On your Mac
After confirming that Bluetooth
is on, go to System Preferences >
Bluetooth and click
to open
the Bluetooth Setup Assistant
When Ultrathin Touch Mouse
appears in the device list, select
it and click Continue Follow the
on-screen instructions
When pairing is complete, the
status light on the mouse lights
steadily blue for 30 seconds
Software required
Install Logitech software
for smoother performance,
customizable settings and
optimal gestures
Download the software from:
www.logitech.com/support/t631
English 5
Pair with another Mac
To use your mouse with another
Mac, pair with it using the
remaining channel
Slide the Bluetooth Easy Switch
to the other, unused channel and
press Connect
Repeat the instructions in “Set
up Bluetooth ”
Now you can switch between
Macs by selecting the Bluetooth
channel you used to pair it with
the mouse
Support
Visit the product page
While online, check out product
page, your destination for world-
class support
Here you’ll find tutorials,
guidelines and troubleshooting
tips for your Ultrathin Touch
Mouse for Mac
Product page is also home to
lively forums that connect you
to a community of active users
www.logitech.com/support/t631
6 English
Clicking (one finger)
Gestures
Lift the non-
clicking finger
completely off
the surface
Click. Press the left side of the
touch surface
Right-click. Press the right
side of the touch surface
Scroll. Swipe up, down,
or sideways
English 7
This ratio is approximate and based on
standard user experience Your results
may vary
*
Use the charging cable to
connect Ultrathin Touch Mouse
to your computer or a USB
power adapter The status light
blinks green while the mouse
is charging
Charge your mouse until the
status light stops blinking
(A blinking red light means
it’s time to recharge )
Each minute of charging gives
you about an hour of use *
Charge the battery
8 English
Mouse not working?
•��On�your�Mac,�confirm�
Bluetooth is turned on
•��Slide�the�On/Off�switch�to�Off,�
then back to On
•��If�the�status�light�flashes�red,�
recharge the battery (See
“Charge the battery ”)
•��Confirm�that�the�selected�
Bluetooth channel (1 or 2) is
the same channel you used to
initially pair the mouse with
your Mac
•��Restart�your�Mac.
•��Check�the�Bluetooth�settings�
on your Mac to see if “Ultrathin
Touch Mouse” is listed If so,
remove it from the list and
repeat the steps for pairing
in “Set up Bluetooth ”
www.logitech.com/support/t631
English 9
©2013 Logitech Logitech, the Logitech logo,
and other Logitech marks are owned by
Logitech and may be registered All other
trademarks are the property of their respective
owners Logitech assumes no responsibility for
any errors that may appear in this manual
Information contained herein is subject to
change without notice
620-005158 004
www.logitech.com
