Lorex VQ1536HRB Quick Start Manual

www.lorexcctv.co Product Information User Manuals Quick Start Guides Specification Sheets Software Upgrades Firmware Upgrades www.lorexcctv.com VISIT: Lorex Technologies Inc. Copyright © 2008 Lorex Technologies Inc. As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE It’s all on the Web! Camera Specifications PROFESSIONAL COLOR SURVEILLANCE DOME CAMERA Day/Night, Weatherproof, Vanda Resistant, Advanced Image Senso Specfications: Image Sensor Video Output Horizontal Resolution FOV (diagonal) Termination Lens / Lens Mount S/N Ratio Sync. & Scan. Systems IR Range Power Consumption 70 Degrees Video: BNC Female 3.6 mm F2.0/Fixed > 48dB Internal; 2:1 Interlace Up to 40 ft (12 m); 12 LEDs 220 mA max Operating Temp. 14°F ~ 122°F (-10°C ~ 50°C) Comp. 1.0 Vpp @ 75ohm Iris & Shutter Speed AES; 1/60 ~ 1/50,000 sec. Power Requirement 12V DC ±10% Dimensions DIA: 3.7” (94 mm) Minimum Illumination Video Format / Pixels 0.5 LUX @ F1.2 (IR Off) 0 LUX (IR LEDs ON) Weight 0.85 lbs / 386 g 1/4” AIS NTSC: 656 (H) x 492 (V) 480 TVL Dimensions 3.7in/94mm 3.1in/ 75mm MODEL: VQ1536HR English Version 1.0

extension cable, or directly to a DVR / Observation System or to a TV/VCR. Note: Note: Connect the BNC to RCA Adaptor as needed to allow fo proper connectivity. 5. Connect the A/C Power Adaptor to the 60ft Extension cable (Black connector). Plug the Power adaptor to a wall outlet. Note: Note: If the onscreen display is blurry, you may need to set th Monitor Impedence switch to 75 ohms. Figure 3.0 Connect the BNC cable to a DVR, CCTV, monitor or TV Figure 4.0 Connect power cable from BNC extension cable to the AC Power Adaptor (included). Contents Installing the camera 1 x Vandal Resistant Weatherproof Day/Night Dome Camera Prior to installing the camera, make sure of the following: • Decide to run the cables through the wall/ceiling (drilling required), or along the wall/ceiling. • If you run the cables along the wall/ceiling, you must run the cables through the opening in the camera base, then tuck the cable into the notch on the base. This will keep the camera base flush to the wall/ceiling when mounted.. To install the camera: 1. Mount the Camera Base to the ceiling or wall using the provided screws. Note: You may need to disassemble the camera using the provided Allen key. Loosen the tighening screws located on the outer ring of the Dome Cover. 2. Position the Ball Camera to the desired position and angle. 3. Position the Dome Cover over the Ball Camera. Holding the cover firmly in place, use the Allen key to tighten the screws on the outer ring of the Dome Cover. Note: This camera includes a mechanical Auto IR Cut filter. When conditions change between day/night, an audible clicking noise will be heard coming from the camera. This clicking is normal, an indicates that the IR filter is working. ATTENTION - Test the camera prior to selecting a permanent mounting location by temporarily connecting the cameras and cables to the TV,VCR, DVR or Observation System. Figure 1.0 Attach the base to the mounting surface. Figure 2.0 Tighten the dome cover using the Allen key. Features • 1/4” Advanced Image Sensor (AIS) provides a High Resolution image (480 TV Lines) • Auto Mechanical IR Cut Filter removal function ensures accurate color reproduction • Durable Weatherproof Indoor/Outdoor camera* • 3-axis design allows for wall or ceiling mounting • Enhanced Night Vision Capability — up to 40 ft /12 m ** * Not recommended for submersion in water ** IR Illumination range of 40 ft. (12 m) under ideal conditions. Objects at or beyond this range may be partially or completely obscured, depending on the camera application. WARNING - A REGULATED UL/CSA APPROVED 12V DC 500mA power supply is REQUIRED for use with this camera. Use of a non-reg- ulated, non-conforming power supply can damage this product and will void the warranty. 4 x Mounting screws 1 x Allen key Connecting the camera Setup Diagram: 1 x 60ft. BNC/Power Extension Cable 1 x BNC to RCA Adaptor 1 x AC Power Adaptor