Smeg WDF12C7 Instruction Manual

File Specifications

Brand: Smeg
Category: Washer
Model: WDF12C7 (Instruction Manual), pre6PCqc/kcjk
File Info: Adobe Acrobat PDF (DjVu)
File Size: 1.03 Mb
Pages: 25 pages

Download PDF

Download Smeg WDF12C7 Manual (25 pages)

Read Online:

Read the Smeg WDF12C7 Instruction Manual online using the built-in PDF viewer. This document explains how to operate the device, adjust settings and perform regular maintenance.

Key Pages of Document

The manufacturer declines all responsibility for injury or damage caused by failure to

comply with the above regulations or deriving from tampering with even just one part of the appliance and the use of non-original spare parts. 2. INSTALLATION INSTRUCTIONS Important! The appliance must be installed by a qualified engineer in compliance with the relevant regulations. The washer-dryer is heavy. Take care when lifting it. 2.1 UNPACKING The unit on flexible mounts is fixed in place for transport using the screws (A) on the rear of the washer-dryer, with the relative plastic spacers (B). Onc ...

2.3 CONNECTING TO THE WATER SUPPLY

1. Check that the water supply pressure is in the following range: 0,05-0,9MPa. With higher pressures, use a pressure reducer. 2. Connect the cold water supply hose (blue screw collar) to the cold water tap with ¾ gas threaded connector, taking care to tighten firmly to prevent leaks. The water sup- ply hose must not be kinked or crushed and must not be changed or cut. Threaded connections must only be tightened by hand. 3. When appliances are supplied with hot water, the intake water temperature must not exceed 60°C and the hose with red s ...

4.4 LOADING THE ITEMS FOR WASHING

1. Open the door and load the laundry, distributing it evenly over the drum, with items opened out and not bundled together; if possible, large and small items should be well mixed. 2. The washing machine covered by this manual can be loaded with up to 7kg of laundry for each wash. If this weight is exceeded, the washing results will be poor and the appliance may malfunction. 3. To save energy it is more economical to wash full loads of the various types of fabric, following the guidance on quantities provided in the "Programmes Table" supplied in this m ...

1. Precautions for safety and use

2 2. Installation instructions 5 3. Description of controls 8 4. Using the appliance for washing 9 5. Using the appliance for drying 17 6. Cleaning and maintenance 20 7. Troubleshooting 22 This appliance is tagged in accordance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment - WEEE. This directive contains the regulations governing the collection and recycling of decommissioned appliances throughout the European Union. The symbol of the rubbish bin with a line through it on the appliance or its packaging indicates ...

Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles

and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer • Fabric softeners, or similar products, should be used as specified by the fabric softener instruc- tions. • The final part of a tumble dryer cycle occurs without heat (cool down cycle) to ensure that the items are left at a temperature that ensures that the items will not be changed • Never stop a tumble drier before the end of the drying cycle unless all items are quickly removed and spread ...

4.12 TIME TO END

1. To select options “time to end”,press the “Option selection” button, pressing repeatedly the “Confirm op- tion” button options you can select when the wash cycle ends.. The time to end of cycle function calcu- lates the initial duration of the washing/drying cycle, the settings made (temperature, spin speed and op- tions) which may shorten or lengthen the cycle's initial duration, and the delay time the user wishes to add before the cycle starts. 2. After the time to end has been set, the symbol on the display remains on. 3. To clear the “time to end” ...

4.14 INTERRUPTING OR CHANGING THE WASHING PROGRAMME

The washing programme in progress can be interrupted at any moment: 1. press the “Start/Pause” button for about 3 seconds: the display shows the word PAUS (for 1 second) al- ternating with the time remaining until the end of the cycle (for 1 second). The Start/Pause light flashes on and off. Programmes can also be interrupted by turning the programme/temperature setting knob while the cycle is in progress. 2. To change the washing programme, simply turn the programme knob to select the new programme; the- re is no need to set the ap ...

Appliance does not spin

Anti-imbalance safety device tripped because laundry not evenly distrib- uted in drum. If laundry is still wet at end of cycle, rearrange it in the drum by hand and repeat spin programme only. 12 Emptying water from drum In the event of a power blackout or appliance failure, the water can be removed from the drum using the emergency procedure. 13 Laundry not properly spun Large items screwed up and not evenly distributed within drum. Always wash a mix of large and small items. 14 Traces of detergent on laundry Many phosphate-free detergents contain substances w ...

Smeg WDF12C7 user guide recommended for: LBS107F, LBS845-9, EW156-110, WDF6127, WHT710EIT.

⚠️ Download Safety

The Washer Instruction manual (25 pages) is completely safe to download (last scan date: 04/05/2026).

Related PDF Instructions for Smeg WDF12C7:

Washer Equipment: Frequently Requested

Have some Questions about Smeg WDF12C7 Device?

Get valuable and actionable advices from other Smeg WDF12C7 device users. Describe your problem or question, regarding the using of WDF12C7, in as much detail as possible, and other users will be able to answer you.