Manhattan 173124 Operation & User’s Manual
Read Online
Read the Manhattan 173124 Operation & User’s Manual online using the built-in PDF viewer.
Text of the manual
Thank you for purchasing the MANHATTAN
® PCI Sound Card, Model 173124. Follow the
instructions in this manual for easy installation and enjoy these quality features:
• Full duplex playback and record with up to 48 kHz / 16-bit sample rates • Plug and Play ability
• Support for HRTF 3D positional audio, DirectSound 3D and A3D interfaces
• 32-bit PCI bus with Bus Mastering • Built-in 32-Ohm earphone buffer • Lifetime Warranty
ConnECtIonS
NOTE: To avoid conflicts, it is recommended that any previously installed sound card and drivers be
removed prior to installing this Card. If previously installed drivers are not removed, this card may not
function properly. If your computer has on-board sound, it needs to be disabled on the motherboard.
Insert the card in an available PCI slot on your computer.
Fasten the card to the case using a screw.
Connector
Function
J3
Analog CD/IN port (signals: L-G-G-R)
J4
Analog CD/IN port (signals: G-R-G-L)
J2
Aux-in
Line-IN
Line-IN Connect to the audio output port of stereo
Mic-IN
Connect to the microphone (mono)
Front Speakers Output to speakers with the amplifier or earphones or Audio-IN of home stereo
Rear Speakers Connect to the rear speakers while 4-/6-channel speaker mode is enabled
Center/Subwoofer Connect to the center speaker & subwoofer while 6-channel speaker mode is enabled
J6, J7
Short 1-3, 1-3: Normal
Short 3-5, 3-5: Inverse
GAME/MIDI
Connect to joystick or devices using MIDI interface
Connections
LINE IN
MIC IN
Front speakers
Rear speakers
Center/Subwoofer
Game/MIDI
1. Insert the driver CD into the
CD-ROM drive and double-click
the Setup icon.
2. Select "Install Device Driver and Applications"
to continue.
3. In the Choose Setup Language window, select
the language of your choice and click "OK."
4. When the Welcome screen appears, click
"Next."
5. When the Choose Destination Location screen
appears, click "Next."
6. On the Select Program Folder screen,
select "Accessories" in the Existing Folders
window and click "Next."
At this point, Windows will begin copying
files.
7. When the Restarting Windows
screen appears, select "Yes, I
want to restart my computer
now." Click "OK."
NOTE: To remove the driver installation, click "Start," select "Program," find and run the "Uninstall
device drivers and applications" program in the PCI audio applications folder, then follow the
on-screen instructions.
• PCI Specification, Rev 2.1
• ACPI compliant
• Microsoft PC99
General
• Ports:
External: line-in, front-out, microphone-in,
rear-out, center/subwoofer-out
Internal: aux-in, analog CD-in (Sony),
analog CD-in (Panasonic)
• C-MEDIA 8738 chipset
• 6Ch DAC for AC3 5.1Ch
• Sound Blaster & Sound Blaster Pro compatible
• Game/MIDI port MPU-401 UART & Sound
Blaster MIDI mode/standard IBM PC
game port compatible
• 16-bit duplex CODEC
• ACPI and PCI PMI support
• 32-bit PCI Bus
Environmental
• Dimensions, overall: 13.4 x 12.1 x 2.2 cm
(5.27 x 4.8 x 0.86 in.)
• Weight: 65.2 g (2.3 oz.)
System Requirements
• PC Intel Celeron 350 MHz or
AMD K6II 500 MHz or above
• 128 MB RAM
• Windows 98SE/Me/2000/XP/Vista
• CD-ROM drive
Package Contents
• PCI Sound Card, 5.1 Channel with Game/
MIDI Port
• User manual
• Driver CD
Are you completely satisfied with this product?
Please contact your MANHATTAN
® dealer with comments or questions.
Copyright © MANHATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.