Marantz PD4230V Operation & User’s Manual

command. When making it operate using ID, bit1 and bit0 are set up as follows. Bit1,Bit0 Unit ID distinction bit 11B :Usually, a form (with no ID) 10B :Usually, a form (with no ID) 01B :Set ID 00B :Video wall ID In the case of ACK, when the lower order 4 bits is FH (as in 3FH and 7FH), this indicates that the commands and data of the supported equipment have been received. When the lower order 4 bits is BH (as in 3BH and 7BH), this indicates that unsupported commands and data have been receive ...

CKS DATA00 : 00H: low 01H: middle 02H: high 03H: middle low 14. RED Gain Data Function The external control equipment changes the RED Gain Data of the plasma monitor. Transmission Data DFH 80H 60H 7FH 04H DATA00 to DATA03 CKS DATA00 : USER PICTURE Gain Flag 01H DATA01 : RED Gain Flag 01H DATA02 : RED Gain1(Bias) D8H : -40 : FFH : -01 00H : 0 01H : +01 : 1EH : +30 DATA03: RED Gain2(Drive) D8H : -40 : FFH : -01 00H : 0 01H : +01 : 1EH : +30 ACK 7FH 60H 80H 7FH 02H DATA00 DATA01 CKS DATA00 : USER PICTURE Gain Flag 01H DATA01 : RED Gain Flag 0 ...

1A 1B 1C 1D 1E 1F 20 21 22 23 Corresponding character U V W X Y Z Received data (H) 24 25 26 27 28 29 ACK 3FH 60H 80H 2DH 00H CKS NOTE) Please select the memory you like to write by “68.PICTURE MEMORY Select” before setting “PICTURE MEMORY NOTE WRITE” 64.SET UP LEVEL SELECT Function External control apparatus selects the Set up level function of a plasma monitor. Transmission Data DFH 80H 60H 35H 01H DATA00 CKS DATA00 01H : 0% 02H : 3.75% 03H : 7.5% ACK 7FH 60H 80H 35H 01H DATA00 CKS DATA00 01H : 0% 02 ...

DATA00 : USER PICTURE Gain Flag 01H DATA01 : TINT Gain Flag 05H 12. PICTURE MODE Select Function The external control equipment sets the picture mode of the plasma monitor. Transmission Data DFH 80H 60H 0AH 01H DATA00 CKS DATA00: 01H : NORMAL 02H : THEATER1(It cannot choose in the still picture input of a personal computer.) 03H : THEATER2(It cannot choose in the still picture input of a personal computer.) 04H : Default 05H : Bright ACK 7FH 60H 80H 0AH 01H DATA00 CKS DATA00: 01H : NORMAL 02H : THEATER1 03H : THEATER2 04H : Defa ...

would be padded right with blanks. Example: If the product code of your plasma monitor is “50XGA”, the returned codes would be as follows. DATA00:05H, DATA01:00H, DATA02:27H, DATA03:16H, DATA04:10H, DATA05:96H, DATA06:96H, DATA07:96H, DATA08:96H, DATA09:96H, DATA10:96H, DATA11:96H ...

Function The external control equipment sets the PLE, ORBITER, and INVERSE (inverse of image brightness) or WHITE of the plasma monitor. Transmission Data DFH 80H 60H 6BH 03H DATA00 DATA01 DATA02 CKS DATA00 : PLE 01H : 100%(AUTO) 02H : 75%(LOCK1) 03H : 50%(LOCK2) 04H : 25%(LOCK3) DATA01 : INVERSE/WHITE 01H : INVERSE 02H : OFF 03H :WHITE DATA02 : ORBITER (PICTURE SHIFT) 01H : AUTO1 02H : OFF 03H : AUTO2 ACK The plasma monitor returns the following ACK when setting the PLE, ORBITER, and INVERSE (inverse of image brightness) or WHITE: 3FH 60H 80H 6BH ...

Function The external control equipment sets the D-SUB SELECT of the plasma monitor. Transmission Data DFH 80H 60H 8DH 01H DATA00 CKS DATA00 : D-SUB INPUT 01H : RGB 02H : SCART3(*:Only Europe can be chosen.) ACK The plasma monitor returns the following ACK when setting the D-SUB SELECT: 7FH 60H 80H 8DH 01H DATA00 CKS DATA00 : D-SUB INPUT 01H : RGB 02H : SCART3(*:Only Europe can be chosen.) 49.LOW TONE Function The external control equipment sets the dithering processing or error diffusion processing of the plasma monitor. Transmission Data DFH 80H 60H 0CH 01H ...