Marmitek 25 Owner's Manual

File Specifications

Brand: Marmitek
Category: Universal Remote
Model: 25 (Owner's Manual), prXuaS3l5Suqo
File Info: Adobe Acrobat PDF (DjVu)
File Size: —
Pages: 68 pages

Download PDF

Download Marmitek 25 Manual (68 pages)

Read Online:

Read the Marmitek 25 Owner's Manual online using the built-in PDF viewer. This document explains how to operate the device, adjust settings and perform regular maintenance.

Key Pages of Document

A/V: selecteert de SCART-ingang om bijv. een dvd, video of satellietprogramma te

bekijken of op te nemen. SEARCH: scant de beschikbare programmakanalen of tracks (zie hoofdstuk 15.4). P

4. Release Setup key.

5. Press and release the Touchscreen "CODE" Key. 6. Display shows the Mode Setup Screen. Press and release desired Mode key (TV, VCR, SAT, etc.) on the rubber keypad. Note The Brand Search Method is not available for Audio appliance. 7. Display will show the Code Setup Screen. Using the table, press and release the numerical key (0-6) corresponding to desired Manufacturer. Note - pressing "0" carries out a full library search same as normal Code Search Method. Brand CODE Philips/Radiola/Aristona/Erres 1 Sony/Panasonic/JVC/Sharp Akai/Toshiba/Daewoo 2 Thomson ...

geldt ook als opdracht. Na het indrukken van 3 knoppen gaat u automatisch naar

stap 8. Druk u minder knoppen in, dan moet u op de SETUP toets drukken en naar stap 8 gaan. 8. Het Main Setup Screen wordt weer weergegeven. Het instellen van de kanaalwissel functie is nu voltooid. Druk op de EXIT-knop op het Touchscreen om terug te gaan naar normale weergave. 9. Om de kanaalwisselfunctie te activeren drukt u herhaaldelijk op de P

7. Learning is now complete. Press and release the Touchscreen "EXIT" key to return to

normal operation. To Clear all stored Learned Commands under a Mode: 1. Press and hold Setup key until the LED remains on (this occurs after approximately 2-3 seconds) and display shows the Main Setup Screen. 2. Release Setup key. 3. Press and release the Touchscreen "LEARN" Key. 4. Display will show the Mode Setup Screen. Press and release desired Mode key (TV, VCR, SAT, etc.) on the rubber keypad. The LED will blink off once to indicate the keypress acceptance. 5. Display will show the Learn Se ...

7. Learning is now complete. Press and release the Touchscreen "EXIT" key to return to

normal operation. To Clear all stored Learned Commands under a Mode: 1. Press and hold Setup key until the LED remains on (this occurs after approximately 2-3 seconds) and display shows the Main Setup Screen. 2. Release Setup key. 3. Press and release the Touchscreen "LEARN" Key. 4. Display will show the Mode Setup Screen. Press and release desired Mode key (TV, VCR, SAT, etc.) on the rubber keypad. The LED will blink off once to indicate the keypress acceptance. 5. Display will show the Learn Se ...

Marmitek 25 user guide recommended for: EASYTOUCH ET35, POWERMID PLUS, Powermid XS Wireless Remote Control Extender, TV ANYWHERE, X-10.

⚠️ Download Safety

The Universal Remote Owner's manual (68 pages) is completely safe to download (last scan date: 05/01/2026).

Related PDF Instructions for Marmitek 25:

Universal Remote Equipment: Frequently Requested

Have some Questions about Marmitek 25 Device?

Get valuable and actionable advices from other Marmitek 25 device users. Describe your problem or question, regarding the using of 25, in as much detail as possible, and other users will be able to answer you.