McCall 1-1020GD Specifications

Phone (731) 847-5570 / Fax (731) 847-9012 / 1-888-REACH-IN (1-888-732-2446) / www.mccallrefrigeration.com January 2007 / Printed in U.S.A. Cabinet - Cabinets are all metal, inside and out. The top, back, and bottom are made of galvanized steel. In addition, all seams are closed and sealed, with metal edges turned away from the exposed surface. The result is an integrated structural frame. Internal corners are coved to conform to NSF standards. Automatic interior lighting is controlled by a light switch mounted inside. Doors - Hinged glass doors with horizontal 40 watt fluorescent lighting. (1 section only, 2 & 3 sections vertical.) Insulation - Cabinet body, doors, and evaporator coil housings are filled with pressure-injected polyurethane foam. Interior Shelves - Three wire shelves per section are standard. Shelves have a runner spaced 3/4 inch O.C. with two reinforcing bars 8 1/2 inch O.C. Coated with 7 mils of baked-on gray epoxy. The shelves have a saline spray corrosion resistance of 600 hours. Shelves will support 250 pounds each with maximum cabinet load of 800 lbs. They are supported on stainless steel pilasters (1000 series) & aluminum pilasters (2000-4000 series), and are adjustable on 1 inch centers. All three shelves are interchangeable and can be adjusted without tools or special parts. Self-Contained Refrigeration - The complete refrigeration assembly is mounted on top of the cabinet behind a removable hatch cover. Refrigeration components include a hermetically sealed compressor, thermostatic expansion valve, thermostatic temperature control, high-humidity evaporator coil and hot gas condensate evaporator. The system is balanced to maintain 38°F average internal air temperature. Windrunner gradient air displacement process provides even air flow and temperature control throughout the cabinet. All components are factory installed and tested, and supplied with an attached cord and plug (self-contained, 115 volt only less than 16 amps), master power switch, and exterior digital thermometer (1000 series) dial thermometer (2000-4000 series). Remote Cabinets - Standard remote units are provided with capped refrigeration lines, expansion valve, solenoid valve, electric condensate evaporator, and temperature control. Condensing unit is not included. All other features are the same as self-contained units, except power cord. Approval : AIA # ITEM # MODEL # PROJECT NAME SIS # SPECIFICATIONS Model 1-1020GD Stainless steel cabinet interior and exterior front, sides with two pane glass doors. Model 2-2020GD Stainless steel cabinet exterior front, sides and floor with two pane glass doors. Heavy gauge aluminum cabinet interior. Model 4-4020GD Heavy gauge anodized aluminum cabinet exterior sides. Stainless steel cabinet front except for aluminum ends that wrap around front. 2 pane glass doors. Heavy gauge aluminum cabinet interior with stainless steel floors. Standard Features • Top mounted compressor and evaporator coil • Expansion valve • Hot gas condensate evaporator • Windrunner gradient air displacement process • R-134a refrigerant • Exterior digital thermometer (1000 series) dial thermometer (2000-4000 series) • Self-closing spring loaded hinges • 6 inch adjustable legs • Baked epoxy-coated shelves adjustable on 1 inch centers GLASS DOOR REACH-IN REFRIGERATORS ( 1 SECTION ) 1-1020GD CLASSIFIED TO NSF (STD-7-1999) McCall Refrigeration specification sheets are available online @ www.mccallrefrigeration.com

Phone (731) 847-5570 / Fax (731) 847-9012 / 1-888-REACH-IN (1-888-732-2446) / www.mccallrefrigeration.com January 2007 / Printed in U.S.A. Notes: (R) Remote cabinets are equipped for 15 amp permanent connection. *First 3 digits omitted. **Based on 90°F ambient and 20°F evaporating temperature. Specifications subject to change without notice. Certain options and accessories may affect UL/NSF approval and electrical requirements. 27.5 POWER CONNECTION 31.81 57.81 OPTIONS 01 K Half height doors. C K Heavy-duty 6 inch casters (on cord connected models only). A K Audio visual alarm. P K Pass-Thru. R K Remote. Model Suffix Description Model Suffix Description E K Electric condensate evaporator. K Finished back. K Tray slides K Stainless steel shelves. K extra epoxy coated shelves. K Left or right door hinge. K Digital Thermometer One Section Net Capacity: 22.4 cu.ft. Width: 27.5" Height: with legs or casters 84.5" Depth: cabinet only - including controls 31.18" Depth: over hardware - reach-in 34.81" Depth: over hardware - pass-thru 38.44" Depth: door open 90° - reach-in 57.81" Depth: door open 90° - pass-thru 84.44" Net Door Opening: width 21.25" Net Door Opening: height -full doors 58" Net Door Opening: height - half doors 27" Adjustable Shelves 3 Shipping Weight: DIMENSIONS Model 1-1020GD 4-4020GD 2-2020GD 420 lbs. 375 lbs. 330 lbs. One Section Base Model Number* 20GD 20PGD Compressor HP 1/2 1/2 Voltage (60 hz, 1 ph) 115 115 Total Amperage: 11 13.6 BTU/HR** 3012 4140 Cord connection - ANSI 15 5-20P ELECTRICAL Bidding Specifications McCall Glass Door Reach-In Refrigerator Cabinets shall have: Top mounted compressor. Automatic defrost. Expansion Valve. Hot gas condensate evaporator. Matched and balanced system. Exclusive Windrunner Gradient Air Displacement Process. Stainless steel front, doors and floor. Self-closing hinged glass doors, with fluorescent lights. Adjustable doorstops. Exterior digital thermometer (1000 series) dial thermometer (2000-4000 series). Stainless steel pilasters (1000 series) & aluminum pilasters (2000-4000 series) adjustable on 1" centers. Three epoxy coated shelves per section. 6" adjustable legs. Master Power Switch. R-134a refrigerant. 22.4 cubic ft. capacity. Dimensions: Width=27.5"/Height=84.5" Model 1-1020GD Model 2-2020GD Model 4-4020GD GLASS DOOR REACH-IN REFRIGERATORS ( 1 SECTION ) 84.44 31.18 POWER CONNECTION 27.5 33.5 34.81 13.56 64.93 84.5 TOP VIEW SIDE VIEW TOP VIEW (PASS-THRU) Pass Thru AIA # 6 16016