Metabo KS 54 - Brochure

and quality. Built tough for the demands of the professional, machines with long life motors, safety clutches, large rip fences, solid all metal gear housings, riving knifes and quick cut blades fitted as standard are available within the range. Metabo. Work. Don’t play. SAWS

saw housing � � Cutting indicator can be set precisely � � Extraction nozzle rotatable and stoppable � � Auto-stop carbon brushes � Comparative device characteristics Torque 4 Nm 9 Nm Maximum cutting depth at 90° 54 mm 66 mm Maximum cutting depth at 45° 38 mm 47 mm Cutting depth adjustable 0 - 54 mm 0 - 66 mm Saw blade diameter 160 mm 190 mm No load speed 6.000 /min 4.200 /min Rated input power 1.010 W 1.400 W Output power 630 W 800 W Rated load speed 4.200 /min 3.200 /min Cutting speed at rated load 35 m/s 28 m/s Weight (without mains cable) 3,4 kg 5,5 kg Standard equipment Carbide thin circular saw blade (10 teeth), parallel guide/ripping fence, allen key Carbide thin circular saw blade (14 teeth), parallel guide/ripping fence, allen key Type KS 54 KS 66 Order no. 6.00540 � 6.00542 � COMMON FEATURES � Metabo S-automatic torque limiting clutch � Spindle lock � Fully closed guide plate for secure support � Clearly visible cutting indicator for sawing after initial cut � Safety lock switch to prevent unintentional start of the machine � Angle adjustment of the sawing blade to the guide plate can be aligned for maximum cutting precision � Angle-precise bevel cuts up to 45° � Lubrication system for long service life of the gear � Optimum sawing dust ejection � External dust extraction outlet � Precision guide rail available as accessory (order no. 6.31250) 1010 Watt Circular Saw KS 54 1400 Watt Circular Saw KS 66 Type KSAP 18 Order no. 6.02168 Comparative device characteristics Type of battery pack Li-Ion Battery pack voltage 18 V 1) Capacity of battery pack 2,2 Ah Cutting depth adjustable 0 - 53,5 mm Maximum cutting depth at 90° 53,5 mm Maximum cutting depth at 45° 42 mm Saw blade diameter 165 mm No load speed 2.500 /min Weight (including battery pack) 4,3 kg Standard equipment Carbide circular saw blade (18 teeth), 2 Li-Ion battery packs (18 V/2.2 Ah), hexagon spanner, "AIR COOLED" quick charger AC 30 Plus 18 Volt Cordless Circular Saw KSAP 18 � Ideal handling by ergonomic design � especially high sawing capacity per battery pack � Carbide circular saw blade � Easy saw blade replacement with spindle lock � Fully closed guide plate for secure support � Precisely adjustable and well visible cutting indicator for sawing after initial cut � Suitable for bevel cuts up to 47° � Safety lock switch to prevent unintentional start of the machine � Built-in collector fan to prevent overheating � Sturdy aluminum die cast saw housing � Rubber-coated handle � External dust extraction outlet 1) at nominal voltage, maximum voltage of 20 Volts ... 40% more output with 40% less weight EQUIPMENT FEATURES

KSE 68 Plus SAWS SPECIAL-PURPOSE MACHINES SYSTEMATIC ORGANISATION GARDEN WOOD-PROCESSING TECHNOLOGY WATER-/PUMP TECHNOLOGY WELDING TECHNOLOGY COMPRESSED AIR SYSTEMS CIRCULAR SAWS NEW NEW Special advantages � Quick stop of saw blade on shutting off the machine � � Vario Tacho Constamatic (VTC) full-wave electronics � � Thumbwheel for preselection of speed � � Electronic soft start � � Overload protection � � Two position riving knife lift point � Comparative device characteristics Torque 9 Nm 11 Nm Maximum cutting depth at 90° 66 mm 68 mm Maximum cutting depth at 45° 47 mm 48 mm Cutting depth adjustable 0 - 66 mm 0 - 68 mm Saw blade diameter 190 mm 190 mm No load speed 4.200 /min 2.000 - 4.200 /min Rated input power 1.400 W 1.600 W Output power 800 W 850 W Rated load speed 3.200 /min 4.200 /min Cutting speed at rated load 28 m/s 42 m/s Weight (without mains cable) 5,5 kg 5,6 kg Standard equipment Carbide thin circular saw blade (14 teeth), parallel guide/ripping fence, allen key Carbide thin circular saw blade (14 teeth), parallel guide/ripping fence, allen key Type KS 66 Plus KSE 68 Plus Order no. 6.00544 6.00545 COMMON FEATURES � Metabo S-automatic torque limiting clutch � Spindle lock � Sturdy aluminum die cast saw housing � Sturdy guide plate made from light-weight magnesium die cast � Fully closed guide plate for secure support � Stylish rubber insert on the top handle to aid a comfortable and secure grip � Long double-guided parallel rip fence, can be used left or right � Clearly visible cutting indicator for sawing after initial cut � Safety lock switch to prevent unintentional start of the machine � Angle adjustment of the sawing blade to the guide plate can be aligned for maximum cutting precision � Angle-precise bevel cuts up to 45° � Lubrication system for long service life of the gear � Optimum sawing dust ejection � External dust extraction outlet � Extraction nozzle rotatable and stoppable � Auto-stop carbon brushes � Precision guide rail available as accessory (order no. 6.31213) � Adjustment of machine without tools for using on the precision guide rail 6.31213 1400 Watt Circular Saw KS 66 Plus 1600 Watt Electronic Circular Saw KSE 68 Plus

Accessories Order no. Precision guide rail � Clean-cut edges with no splintering thanks to the guide rail's plastic-extrusion strip edging – even with bevel cuts up to 45° � Guide rail made of sturdy, anodised Aluminium extrusion � Anti-slip backing provides safe and reliable support and protects the workpiece surface against scratches � Guide rule, adjustable to eliminate play suitable for: Metabo jig saws, circular saws and router models OFE 738 and Of E 1229 Signal (when using the appropriate accessories; KS 66 Plus, KSE 68 Plus can be used) Overall length: 1.500 mm 6.31213 NEW Connector � For joining together two precision guide rails 6.31211 NEW Set of two clamps � For fixing the precision guide rail on the workpiece or work table 6.31031 NEW Guide plate � For use with the KSAP 18, KS 54 and KS 54 SP circular saws on the 6.31213 guide rail. � Complete guide plate with 2 mounted aluminium threaded bushes for the circular saws 6.31019 NEW Adapters � For use with the KS 66 and KSE 68 Plus circular saws (alt. Order No. 6.00543) on the 6.31213 guide rail. 6.31020 Sawdust ejection nozzle � Can be rotated � For fitting the suction hose on the circular saw KS 54 and KSE 55 Plus 6.30924 Suction hose With connector Ø 58 mm for bayonet fitting and rubber connector (internal Ø 30 mm, outside Ø 35 mm) Connector Ø: 58/35 mm Hose length: 3,5 m Suction hose Ø: 27 mm 6.31938 Metabox IV � Extremely robust, unbreakable boxes with a wide carrying handle � Carefully thought-out organisation system within the box... ensures that the correct accessory is always with the right tool - special inserts for storing accessories and small parts... and transferring them from box to box - boxes can be stacked and connected - well-structured, clearly arranged storage system, for the workshop, the car, anywhere � The Metabox stays in shape - even at extreme temperatures (-40° to +90°C) � No protruding parts, and thus no danger of getting caught up, e.g. on building sites Dimensions: 395 x 295 x 315 mm For KS 54, KSE 55 Plus, KS 66 For KS 66 Plus, KSE 68 Plus 6.24595 6.24598 Work benches Order no. Flexo 500 universal table � For the stationary use of Metabo jig saws, routers and circular saws (when using appropriate accessories) � With foldable stand and height adjustment � Sturdy steel construction and a large table top made from continuous strand casting 0910064304 Special accessories for Flexo 500 Order no. Circular saw set For Metabo KS 54, KSE 55 Plus, KS 66, KSE 68 Plus circular saws Packaging dimensions (LxHxW): 750 x 280 x 130 mm 0910064398 Table width extension � Increases the supporting surface; ideal for large boards � Enables cuts with parallel guide of up to 610 mm � Height adjustable Length: 674 mm Width: 501 mm 0910064401 Parallel guide/ripping fence � For long cuts or for cutting large boards � Long attachment profile for guiding the work piece safely 0910063707 Mitre guide � Length of rule: 250 mm � Angle area: +/- 60° 0910064410 Chip and dust extraction unit � Extraction at two points: at chip box and at the top on the guard � Clear view of the work piece � Cleaner working environment Extraction nozzle Ø: 100 mm 0910064371 NEW NEW NEW GB GB GB GB GB GB

FOR CIRCULAR SAWS • For fast, coarse and semi-fine cuts with continuous feed rates • Good cutting results for straight cuts in solid wood • Partly usable for construction wood with nails and concrete residue • With coated wood or other composites only coarse cut quality is possible Carbide-tipped circular saw blades "power cut" NEW Diameter mm Cutting width mm Steel blade thickness mm Bore-Ø mm Number of teeth Tooth form Rake angle suitable for Order no. 152 2,4 1,6 20 12 Flat top tooth 15° Ks 0852 S 6.28001 160 2,2 1,4 20 10 Alternately bevel-ground tips 22° KS 54 / KSE 55 Plus 6.28002 167 2,4 1,6 20 12 Flat top tooth 15° Ks 1155 S 6.28003 190 2,6 1,8 20 14 Alternately bevel-ground tips 25° Ks 1266 S / Ks 1468 S 6.28004 190 2,2 1,4 30 14 Alternately bevel-ground tips 25° KS 66 / KSE 68 Plus 6.28005 190 2,2 1,4 30 16 Flat/trapezoid tooth 12° KS 66 / KSE 68 Plus 6.280061) 210 2,6 1,8 30 16 Flat top tooth 25° Ks E 1678 S-Signal 6.28007 230 2,6 1,8 30 18 Flat/trapezoid tooth 10° KS 85 6.280101) 230 2,6 1,8 30 24 Alternately bevel-ground tips 20° KS 85 6.280111) 1) exceptionally nail-proof saw blade Carbide-tipped circular saw blades "precision cut" NEW Diameter mm Cutting width mm Steel blade thickness mm Bore-Ø mm Number of teeth Tooth form Rake angle suitable for Order no. 160 1,6 1,1 20 24 Alternately bevel-ground tips 22° KSAP 18 6.28030 160 2,2 1,4 20 24 Alternately bevel-ground tips 20° KS 54 6.28031 167 2,4 1,6 20 20 Alternately bevel-ground tips 20° Ks 1155 S 6.28032 167 2,4 1,6 20 40 Alternately bevel-ground tips 10° Ks 1155 S 6.28033 190 2,6 1,8 20 48 Alternately bevel-ground tips 10° Ks 1266 S/ Ks 1468 S 6.28034 190 2,2 1,4 30 48 Alternately bevel-ground tips 15° KS 66 / KSE 68 Plus 6.28035 210 2,6 1,8 30 56 Alternately bevel-ground tips 10° Ks E 1678 S-Signal 6.28040 230 2,6 1,8 30 56 Alternately bevel-ground tips 15° KS 85 6.28044 Carbide-tipped circular saw blades "multi cut" NEW Diameter mm Cutting width mm Steel blade thickness mm Bore-Ø mm Number of teeth Tooth form Rake angle suitable for Order no. 150 2,4 1,6 20 36 Alternately bevel-ground tips 10° Ks 0852 S 6.28000 152 2,4 1,6 20 54 Flat/trapezoid tooth 5° neg. Ks 0852 S 6.28070 160 2,2 1,4 20 30 Alternately bevel-ground tips 5°+/-1.5 KS 54 / KSE 55 Plus 6.28071 160 2,2 1,4 20 42 Alternately bevel-ground tips 15° KS 54 / KSE 55 Plus 6.28072 160 2,2 1,4 20 54 Flat/trapezoid tooth 8° KS 54 / KSE 55 Plus 6.28073 167 2,4 1,6 20 42 Flat/trapezoid tooth 6° neg. Ks 1155 S 6.28074 190 2,2 1,4 30 36 Alternately bevel-ground tips 5°+/-1.5 KS 66 / KSE 68 Plus 6.28075 190 2,6 1,8 20 54 Flat/trapezoid tooth 5° neg. Ks 1266 S / Ks 1468 S 6.28076 190 2,2 1,4 30 56 Flat/trapezoid tooth 8° KS 66 / KSE 68 Plus 6.28077 210 2,6 1,8 30 54 Flat/trapezoid tooth 5° neg. Ks E 1678 S-Signal 6.28078 210 2,8 2,0 30 60 Alternately bevel-ground tips 5° neg. Ks E 1678 S-Signal 6.28079 210 2,8 2,0 30 60 Flat/trapezoid tooth 5° neg. Ks E 1678 S-Signal 6.28080 230 2,6 1,8 30 60 Alternately bevel-ground tips 5° KS 85 6.28085 230 2,6 1,8 30 60 Flat/trapezoid tooth 8° KS 85 6.28086 • Very wide range of uses in woodworking • For very good, clean cut results with straight or cross cutting in softwood and hardwood • Well suited for solid and plywoods, chipboards untreated, coated or veneered, MDF, composite materials • The circular saw must have a high performance motor • Universal use for demanding materials • For the highest standards in cutting quality, e.g. laminate, plastic, aluminium, copper and bronze materials • Ideally suited for many applications in interior work • Perfect cutting results, also when crosscutting, in solid wood, coarse, coated or veneered chipboards, MDF • The circular saw must have a very high performance motor • Requires steady and relatively slow feed rates

Metabo offer a solid range of Jigsaws from entry level through to top end professional machines. Backed up with an extensive range of accessories these machines are capable of cutting a whole host of materials from wood, metals, plastics, brick and breeze block to fiber glass and rubber. Important features include high powered motors, tough gear housings, solid blade sup- ports and variable speed electronics to enable the right speed selection for the job in hand. Powerful for continuous professional use The 720-Watt electronic orbital jigsaws enable saw cuts of up to 135 mm thickness in wood. Absolutely straight or circular cuts Additional accessories such as guide rails or circular guides expand the range of applications of the Metabo jigsaws. Vario Constamatic (VC) full-wave electronics The number of strokes can be adapted individually to the material to be cut. For metal, for example, it is low, for wood it is high. Ergonomic design Safe and comfortable work due to a model that fits perfectly in the hand. 5-level pendulum blade movement High cutting output, more comfortable wor- king, longer service life of saw blades. Quick stop of guide plate It enables bevel cuts with angle settings of 15, 30 and 45°. Vario Constamatic (VC) electronics allow you to set the right speed for the application and then maintain that speed, even under moderate loading. Die cast aluminium gear housing Metal gear housings ensure optimum inte- gral machine strength and maximum heat dissipation which aids motor cooling and prolongs service life. Metabo „Quick“ saw blade change Fast, convenient and safe. Saw blade change without key. Saw blade support roller with needle bearing and guide groove Precise saw cuts, as the support roller is particularly deep.

STE 70 ST 50 Pendix SAWS SPECIAL-PURPOSE MACHINES SYSTEMATIC ORGANISATION GARDEN WOOD-PROCESSING TECHNOLOGY WATER-/PUMP TECHNOLOGY WELDING TECHNOLOGY COMPRESSED AIR SYSTEMS Special advantages � Metabo "Quick" saw blade change � � Vario Constamatic (VC) full-wave electronics � � � Thumbwheel for preselection of number of strokes � � Comparative device characteristics Torque 4 Nm 5 Nm 5,5 Nm Maximum thickness of material in - Wood 50 mm 70 mm 80 mm - Nonferrous metals 10 mm 20 mm 25 mm - Sheet steel 3 mm 6 mm 8 mm Levels of pendulum stroke 4 4 4 Strokes at no load 3.000 /min 1.000 - 3.000 /min 1.000 - 3.000 /min Rated input power 400 W 570 W 610 W Output power 240 W 340 W 360 W Weight (without mains cable) 2,2 kg 2,2 kg 2,3 kg Standard equipment Grip-guard, chip break guard plate, jig saw blade, allen key Protective glass, grip-guard, chip break guard plate, jig saw blade, allen key Protective glass, grip-guard, attachable guard plate with chip break guard plate, jig saw blade, allen key Type ST 50 Pendix STE 70 STE 80 Quick Order no. 6.04000 � 6.05700 � 6.06100 � COMMON FEATURES � Robust gear and motor design � Easier and quicker saw blade change � Low lying saw blade supporting roller � Quick locking of guide plate for bevel cuts � Ideal handling by ergonomic design � Full grip bow type handle � Blower for free view of cutting line � Upward slidable grip-guard � Adjustable pendulum stroke � External dust extraction outlet � Auto-stop carbon brushes � Chip break guard in the guide plate � Precision guide rail and guiding device available as accessory � Case for allen key 400 Watt Orbital Jig Saw ST 50 Pendix 570 Watt Electronic Orbital Jig Saw STE 70 610 Watt Electronic Orbital Jig Saw STE 80 Quick JIG SAWS

STE 135 Plus STEB 135 STEB 135 Plus STE 135 JIG SAWS Special advantages � Powerful cutting in wood up to 135 mm thickness � � � � � Easier and quicker saw blade change � � � Metabo "Quick" saw blade change � � � � Rubber-coated full grip bow-type handle � � � Slim motor housing and additional knob � � � Comparative device characteristics Torque 6 Nm 7 Nm 7 Nm 7 Nm 7 Nm Maximum thickness of material in - Wood 110 mm 135 mm 135 mm 135 mm 135 mm - Nonferrous metals 25 mm 35 mm 35 mm 35 mm 35 mm - Sheet steel 8 mm 10 mm 10 mm 10 mm 10 mm Levels of pendulum stroke 5 5 5 5 5 Strokes at no load 1.000 - 2.800 /min 1.000 - 3.000 /min 1.000 - 3.000 /min 1.000 - 3.000 /min 1.000 - 3.000 /min Rated input power 680 W 720 W 720 W 720 W 720 W Output power 400 W 450 W 450 W 450 W 450 W Weight (without mains cable) 2,6 kg 2,5 kg 2,5 kg 2,6 kg 2,6 kg Standard equipment Extraction nozzle, protective glass, grip-guard, chip break guard plate, jig saw blade, allen key Extraction nozzle, protective glass, grip-guard, chip break guard plate, jig saw blade, allen key Extraction nozzle, protective glass, grip-guard, chip break guard plate, jig saw blade, allen key Extraction nozzle, protective glass, grip-guard, chip break guard plate, jig saw blade, allen key Extraction nozzle, protective glass, grip-guard, chip break guard plate, jig saw blade, allen key Type STE 100 Plus STE 135 STE 135 Plus STEB 135 STEB 135 Plus Order no. 6.10501 6.11100 6.10900 � 6.11200 6.11000 � COMMON FEATURES � Robust gear and motor design � Low lying saw blade supporting roller � Quick locking of guide plate for bevel cuts � Ideal handling by ergonomic design � Blower for free view of cutting line � Upward slidable grip-guard � Vario Constamatic (VC) full-wave electronics � Thumbwheel for preselection of number of strokes � Adjustable pendulum stroke � Die cast aluminium gear housing � External dust extraction outlet � Auto-stop carbon brushes � Chip break guard in the guide plate � Precision guide rail and guiding device available as accessory � Case for allen key 680 Watt Electronic Orbital Jig Saw STE 100 Plus 720 Watt Electronic Orbital Jig Saw STE 135 720 Watt Electronic Orbital Jig Saw STE 135 Plus 720 Watt Electronic Orbital Jig Saw STEB 135 720 Watt Electronic Orbital Jig Saw STEB 135 Plus

Jigsaw blade assortments with single lug bayonet shank Suitable for Metabo, AEG, Atlas Copco, Black & Decker, Bosch, DeWalt, Elu, Festo, Hitachi, Holz-Her, Kress, Makita, Skil ... Order no. Jigsaw blade assortment 1 � For wood and metal � HCS saw blades/ HSS saw blade Consisting of 1 saw blade each: 6.23634, 6.23633, 6.23637 Material suitability: Wood, Metal Number of parts: 3 6.23968 Jigsaw blade assortment 2 � For wood, metal and plastic � HCS saw blades/ HSS saw blade Consisting of 1 saw blade each: 6.23633, 6.23635, 6.23632, 6.23631 und 6.23637 Material suitability: Wood, Plastics, Metal Number of parts: 5 6.23645 Jigsaw blade assortment 3 � For wood, metal and plastic � HCS saw blades/ HSS saw blades Consisting of 2 jigsaw blades each: 6.23634, 6.23633, 6.23646, 6.23637, 6.23638 Material suitability: Wood, Metal, Plastics Number of parts: 10 6.23600 Jigsaw blade assortment 4 � For wood � HCS saw blades Consisting of 10 saw blades 6.23633 and 6.23635 and 5 saw blades 6.23649 Material suitability: Wood Number of parts: 25 6.23698 Accessories Order no. Guard plate � For fitting on the base plate of jigsaws. The guard plate protects sensitive workpiece surfaces from scratches 6.23664 Circle-cutting and parallel guide � For cutting circles of Ø 100 to Ø 360 mm and for cutting parallel to an edge (maximum distance from the edge 210 mm) 6.31340 Guiding device � For using jigsaws in conjunction with the guide rail 6.31250/ 6.31213 6.31249 Precision guide rail � Clean-cut edges with no splintering thanks to the guide rail's plastic-extrusion strip edging – even with bevel cuts up to 45° � Guide rail made of sturdy, anodised Aluminium extrusion � Anti-slip backing provides safe and reliable support and protects the workpiece surface against scratches � Guide rule, adjustable to eliminate play Overall length: 1.500 mm 6.31213 Order no. Connector � For joining together two precision guide rails 6.31211 Set of two clamps � For fixing the precision guide rail on the workpiece or work table 6.31031 Jigsaw bench mounting plate With clamp for fixing on the workbench Table-top dimensions: 183 x 255 mm 6.23689 Flexo 500 universal table � For the stationary use of Metabo jig saws, routers and circular saws (when using appropriate accessories) � With foldable stand and height adjustment � Sturdy steel construction and a large table top made from continuous strand casting 0910064304 Table width extension � Increases the supporting surface; ideal for large boards � Enables cuts with parallel guide of up to 610 mm � Height adjustable Suitable for: UK 333, UK 290, Flexo 500 Length: 674 mm Width: 501 mm 0910064401 Lubricating stick � For lubricating the jigsaw blades when sawing metal 6.23443 3 chip break guard plates Suitable for: ST 50 Pendix, STE 70, STE 80 Quick 6.31208 3 chip break guard plates Suitable for: STE 100 Plus, STE 135, STE 135 Plus, STEB 135, STEB 135 Plus 6.23665 Suction hose With connector Ø 58 mm for bayonet fitting and rubber connector (internal Ø 30 mm, outside Ø 35 mm) Hose length: 3,5 m Suction hose Ø: 27 mm 6.31938 Carry case For ST 50 Pendix, STE 70, STE 80 Quick 6.25450 Carry case For STE 100 Plus, STE 105 Plus, STEB 105 Plus, STE 135, STE 135 Plus, STEB 135, STEB 135 Plus 6.25446 Metabox I for ST 50-STEB 135 For ST 50 Pendix, STE 70, STE 80 Quick, STE 100 Plus, STE 135 Plus, STEB 135 Plus Dimensions: 395 x 295 x 105 mm 6.24639 NEW NEW NEW NEW NEW GB GB

WITH THESES ONE ALWAYS MAKES A GOOD CUT. Colour The colour indicates for which material the blade is suited best. Yellow for wood Yellow with blue lettering for wood with nails Blue for metal Black for special applications Quality class >classic< series good results and very good service life >professional< series fast, clean and precise angle-cutting with long service life >pionier< series cuts fast through all materials ("through thick & thin") >expert< series for special applications Basic blade material HCS carbon steel, for cutting soft wood, hardboards, plastics HSS High yielding high-speed steel, suitable for metal, aluminium work BiM Bimetal especially flexible mix of HCS and HSS. The saw blades have a much higher life expectancy (bimetal) than HCS and HSS and have proven their worth when there is danger of shaft-breaking HM Hard-Metal (carbide) applicable to stainless steels, glass, re-inforced plastic, plastics, gypsum plaster or cement fibre boards. Saw blades with HM-coating are suitable for cutting ceramic tiles Shank forms The jig-saw blades from Metabo are produced to all shank forms matching the jig saws available from other brand names. Type Teeth milled, waved for clearance gap A relative rough cut, fast progress in cutting hard and soft wood, aluminium, NE-metals and plastics Teeth ground, offset for clearance gap Fast cutting in hard and soft wood Teeth ground, offset for clearance angle and clearance gap Fine and clean cut in wood and plastics Teeth milled, offset for clearance gap A relative rough cut, fast progress in cutting on hard and soft wood, aluminium, NE-metals and plastics The features of the Metabo jig saw blades Single lug bayonet shank U-Shank Makita-Shank Fine shank

Jig saw blades with single lug bayonet shank Suitable for Metabo, AEG, Atlas Copco, Black & Decker, Bosch, DeWalt, Elu, Festo, Hitachi, Holz-Her, Kress, Makita, Skil ... Material suitability Version Material Usable length mm Tooth pitch Corresponds to Bosch type Packing unit Order no. FOR WOOD, "CLASSIC" SERIES Hard wood, Soft wood, Chipboards, Wood-core plywood 2-15 mm, Fibre boards 2-15 mm, Plastics, Insulating material Milled, Crimped HCS 51 2,0 mm T 119 B 5 6.23631 Hard wood, Soft wood, Chipboards, Wood-core plywood 2-15 mm, Fibre boards 2-15 mm, Plastics, Insulating material, Saw blade with insertion head Milled, Crimped HCS 66 1,9 - 2,3 mm/ 23-17 TPI/ progressiv T119B 5 6.23920 Hard wood, Soft wood, Chipboards, Wood-core plywood 2-20 mm, Fibre boards 2-20 mm, Plastics, Insulating material, Especially for curved cuts Milled, Crimped HCS 51 2,0 mm T 119 BO 5 6.23646 25 6.23605 Hard wood, Soft wood, Plastics, 4-50 mm, For quick, rough cuts Milled, Crossed HCS 74 3,0 mm T 111 C 3 6.23963 5 6.23632 25 6.23606 100 6.23714 FOR WOOD, "PROFESSIONAL" SERIES Hard wood, Soft wood, Chipboards, Wood-core plywood 5-50 mm, For quick cuts Ground, Crossed HCS 74 4,0 mm T 144 D 3 6.23964 5 6.23633 25 6.23690 100 6.23712 Hard wood, Soft wood, Chipboards, Wood-core plywood 5-50 mm, For quick cuts, Saw blade with insertion head Ground, Crossed HCS 74 4-5,2 mm/ 6-5 TPI/ progressiv T 144 D 5 6.23921 Hard wood, Soft wood, Chipboards, Wood-core plywood 5-50 mm, Especially for curved cuts Ground, Crossed HCS 74 4,0 mm T 244 D 3 6.23966 5 6.23649 25 6.23607 100 6.23713 Hard wood, Soft wood, Chipboards, Wood-core plywood 5-50 mm, Especially for curved cuts, Saw blade with insertion head Ground, Crossed HCS 74 4-5,2 mm/ 6-5 TPI/ progressiv T 244 D 5 6.23960 Hard wood, Soft wood, Chipboards, Wood-core plywood 2-15 mm, Fibre boards, For quick cuts Ground, Crossed HCS 126 4,0 mm T 344 D 5 6.23678 Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards, Constructional wood, Extra thick Ground, Crossed HCS 150 4,0 mm T 744 D 5 6.23603 Soft wood, Plywood, Plastics, 1.5-5 mm, Especially for curved cuts, For clean cuts Clearance angle ground, Tapered HCS 57 1,4 mm T 101 AO 5 6.23651 25 6.23624

JIG SAW BLADES Material suitability Version Material Usable length mm Tooth pitch Corresponds to Bosch type Packing unit Order no. Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards, Plastics, 3-30 mm, For clean cuts Clearance angle ground, Teeth ground HCS 74 2,5 mm T 101 B 3 6.23961 5 6.23634 25 6.23691 100 6.23703 Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards, Plastics, 3-30 mm, For clean cuts, Saw blade with insertion head Clearance angle ground, Teeth ground HCS 74 2,7 mm/ 9 TPI T 101 B 5 6.23969 Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards, Coated boards, 3-30 mm, For clean cuts Clearance angle ground, Teeth ground, Reverse toothed HCS 74 2,5 mm T 101 BR 5 6.23650 25 6.23608 100 6.23705 Hard wood, Soft wood, Chipboards, Wood-core plywood 10-45 mm, Fibre boards 10-45 mm, For clean cuts Clearance angle ground, Teeth ground HCS 74 4,0 mm T 101 D 3 6.23962 5 6.23635 25 6.23609 100 6.23704 Hard wood, Soft wood, Chipboards, Wood-core plywood 10-45 mm, Fibre boards 10-45 mm, For clean cuts, Saw blade with insertion head Clearance angle ground, Teeth ground HCS 74 4-5,2 mm/ 6-5 TPI/ progressiv T 101 D 5 6.23923 Hard wood, Soft wood, Chipboards, Wood-core plywood 4-60 mm, Fibre boards 4-60 mm, For clean cuts Clearance angle ground, Teeth ground HCS 91 3,0 mm T 301 CD 5 6.23654 Hard wood, Soft wood, Doors, Kitchen worktops 5-50 mm, For angle-precise cuts, Extra thick Ground, Crossed HCS 74 4,0 mm T 144 DP 5 6.23694 Hard wood, Soft wood, Chipboards, Wood-core plywood 5-100 mm, Fibre boards 5-100 mm, For angle-precise cuts, Extra thick Ground, Teeth ground HCS 104 4,0 mm T 344 DP 5 6.23679 Kitchen worktops, Hard wood 3-65 mm, Soft wood 3-65 mm, Doors, For angle-precise cuts, Extra thick Clearance angle ground, Teeth ground HCS 91 2,5 mm T 301 BCP 5 6.23685 FOR WOOD, "PROFESSIONAL" SERIES, BIM Hard wood, Soft wood, Coated boards, 5-50 mm, For quick cuts Ground, Crossed BiM 74 4,0 mm T 144 DF 5 6.23976 Hard wood, Soft wood, Wood with nails, Coated boards, 5-50 mm, For quick cuts, Saw blade with insertion head Ground, Crossed BiM 74 4-5,2 mm/ 6-5 TPI/ progressiv T 144 DF 5 6.23933 Hard wood, Soft wood, Coated boards, 5-100 mm, For quick cuts Ground, Crossed BiM 126 4,0 mm T 344 DF 5 6.23980

Material suitability Version Material Usable length mm Tooth pitch Corresponds to Bosch type Packing unit Order no. Especially for laminate, Laminated flooring, Hard wood, Soft wood, Coated boards, Plywood, Especially for curved cuts, For clean cuts Clearance angle ground, Teeth ground, Tapered BiM 57 1,4 mm T 101 AOF 5 6.23695 Especially for laminate, Laminated flooring, Hard wood, Soft wood, Coated boards, Plastics, 2-30 mm, For clean cuts Clearance angle ground, Teeth ground, Tapered BiM 74 1,7 mm T 101 AIF 5 6.23948 Hard wood, Soft wood, Laminated flooring, Coated boards, Plastics, 3-30 mm, For clean cuts, Saw blade with insertion head Clearance angle ground, Teeth ground BiM 74 2,7 mm T 101 BF 5 6.23975 Especially for laminate, Laminated flooring, Kitchen worktops 3-30 mm, Coated boards, For clean cuts Clearance angle ground, Teeth ground, Reverse toothed BiM 74 2,5 mm T 101 BRF 5 6.23686 Hard wood, Soft wood, Coated boards, 4-60 mm Clearance angle ground, Teeth ground BiM 91 3,0 mm T 301 CDF 5 6.23696 Hard wood, Soft wood, Chipboards, Glued woods 5-80 mm, Fibre glass reinforced plastics, 5-30 mm, For quick cuts Clearance angle ground, Teeth ground BiM 105 3,0 mm T 301 CLF 5 6.23977 Hard wood, Soft wood, Wood with nails, Non-ferrous metals, Plastics Ground BiM 90 2,5 mm T 111 HF 5 6.23949 FOR WOOD, "PIONEER" SERIES Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards, For quick cuts Clearance angle ground, Teeth ground HCS 91 2,0-3,0 mm, progressiv T 234 X 5 6.23675 25 6.23617 UNIVERSAL, "PIONEER" SERIES Wood, Wood with nails, Metal, Non-ferrous metals, Plastics Crossed, Milled BiM 106 2,4-5,0 mm, progressiv T 345 XF 5 6.23677 25 6.23621 FOR METAL, "CLASSIC" SERIES Sheet steel, 0.5-1.5 mm, Non-ferrous metals Milled, Crimped HSS 66 0,7 mm T 118 G 3 6.23967 5 6.23636 25 6.23693 Sheet steel, 1-3 mm, Non-ferrous metals Milled, Crimped HSS 51 1,2 mm T 118 A 3 6.23965 5 6.23637 25 6.23692 100 6.23706 Sheet steel, 1-3 mm, Non-ferrous metals, Especially for curved cuts Milled, Crimped HSS 51 1,2 mm T 218 A 5 6.23647

Material suitability Version Material Usable length mm Tooth pitch Corresponds to Bosch type Packing unit Order no. Sheet steel, 1-3 mm, Non-ferrous metals, Saw blade with insertion head Milled, Crimped HSS 66 1,1-1,5 mm/ 23-17 TPI/ progressiv T 118 A 5 6.23924 Sheet steel, 1-3 mm, Non-ferrous metals, Especially for curved cuts, Saw blade with insertion head Milled, Crimped HSS 66 1,1-1,5 mm/ 23-17 TPI/ progressiv T 218 A 5 6.23926 Sheet steel, 1-3 mm, Non-ferrous metals, sandwich materials Milled, Crimped HSS 106 1,2 mm T 318 A 5 6.23629 25 6.23623 100 6.23716 Sheet steel, 2.5-6 mm, Non-ferrous metals Milled, Crimped HSS 51 2,0 mm T 118 B 5 6.23638 25 6.23618 100 6.23707 Sheet steel, 2.5-6 mm, Non-ferrous metals, Saw blade with insertion head Milled, Crimped HSS 66 1,9-2,3 mm/ 13-11 TPI/ progressiv T 118 B 5 6.23925 Sheet steel, 2.5-6 mm, Non-ferrous metals Milled, Crimped HSS 106 2,0 mm T 318 B 5 6.23697 FOR METAL, "PROFESSIONAL" SERIES Sheet steel, 1-3 mm, Non-ferrous metals Milled, Crimped BiM 57 1,2 mm T 118 AF 5 6.23971 100 6.23708 Sheet steel, 1-3 mm, Non-ferrous metals, Saw blade with insertion head Milled, Crimped BiM 66 1,1-1,5 mm/ 23-17 TPI/ progressiv T 118 AF 5 6.23950 Sheet steel, 1-3 mm, Sandwich materials 2-65 mm, Non-ferrous metals, Plexiglas Milled, Crimped BiM 106 1,1 mm T 318 AF 5 6.23978 Sheet steel, 2.5-6 mm, Sandwich materials 2-65 mm, Non-ferrous metals, Plexiglas Milled, Crimped BiM 106 1,8 mm T 318 BF 5 6.23979 Sheet steel, 1.5 4 mm, Especially for curved cuts Milled, Crimped BiM 57 1,5 mm T 118 EOF 5 6.23970 Sheet steel, 2.5-6 mm, Non-ferrous metals Milled, Crimped BiM 57 2,0 T 118 BF 5 6.23973 Sheet steel, 2.5-6 mm, Non-ferrous metals, Saw blade with insertion head Milled, Crimped BiM 66 1,9-2,3 mm/ 13-11 TPI/ progressiv T 118 BF 5 6.23929 Sheet steel, 2.5-6 mm, Sandwich materials 2-120 mm, Non-ferrous metals, Plexiglas Milled, Crossed BiM 150 2,0 mm T 718 BF 5 6.23604 Sheet steel, 2-5 mm, Non-ferrous metals Milled, Crimped BiM 50 1,5 mm T 118 EF 5 6.23972

Material suitability Version Material Usable length mm Tooth pitch Corresponds to Bosch type Packing unit Order no. FOR METAL, "PIONEER" SERIES Sheet steel, 1.5-10 mm, Non-ferrous metals up to 30 mm Milled, Crossed HSS 74 1,4 - 2,6 mm, progressiv T 123 X 5 6.23676 25 6.23620 FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES Aluminium 3-15 mm, Non-ferrous metals 4 -20 mm, Plastics, For quick cuts Milled, Crossed HSS 74 3,0 mm T 127 D 5 6.23639 25 6.23622 100 6.23709 Aluminium 3-15 mm, Non-ferrous metals 4 -20 mm, Especially for curved cuts Milled, Crossed HSS 74 3,0 mm T 227 D 5 6.23648 Aluminium 3-15 mm, Non-ferrous metals 4 -20 mm, Plastics, For quick cuts Milled, Crossed BiM 75 3,0 mm T 127 DF 5 6.23974 FOR STAINLESS STEEL, "EXPERT" SERIES Stainless steel sheets (Inox) 1-2 mm, Non-ferrous metals Ground carbide 57 1,1 mm T 118 AHM 3 6.23662 Stainless steel sheets (Inox) 2-4 mm, Non-ferrous metals Ground carbide 57 1,4 mm T 118 EHM 3 6.23663 FOR PLASTICS, "EXPERT" SERIES Fibre glass reinforced plastics, Corian 4-60 mm Ground carbide 91 3,3 mm T 301 CHM 3 6.23687 FOR GYPSUM CARTON/CEMENT MATERIALS, "EXPERT" SERIES Gypsum plaster, Cement fibre boards 5-50 mm, Fibre glass reinforced plastics, 5-20 mm, Ground carbide 74 4,3 mm T 141 HM 1 6.23652 Gypsum plaster, Cement fibre boards 5-80 mm, Fibre glass reinforced plastics, 5-50 mm, Ground carbide 106 4,3 mm T 341 HM 1 6.23688 3 6.23671 FOR PLEXIGLAS, "EXPERT" SERIES Plexiglas, Polycarbonate 2-20 mm, Non-ferrous metals 2 -10 mm Clearance angle ground, Teeth ground HSS 74 2,0 mm T 101 A 5 6.23640 FOR SOFT MATERIALS, "EXPERT" SERIES Expanded polystyrene, Cardboard, Leather, Rubber, Carpet up to 50 mm Knife-blade ground, Straight HCS 74 T 113 A 5 6.23641 Expanded polystyrene, Cardboard, Leather, Rubber, Carpet up to 50 mm Knife-blade ground, Crimped HCS 126 T 313 AW 3 6.23684 FOR CERAMIC MATERIALS, "EXPERT" SERIES Ceramic, Glass, Fibre glass reinforced plastics, Cast iron Coarse Carbide, coated 76 - T 130 Riff 1 6.23657 Ceramic, Glass, Fibre glass reinforced plastics, Cast iron Fine Carbide, coated 76 - T 150 Riff 1 6.23658

Jig saw blades with Fein shank Suitable for FEIN jig saws Material suitability Version Material Usable length mm Tooth pitch Corresponds to Bosch type Packing unit Order no. FOR WOOD, "PROFESSIONAL" SERIES Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 10-40 mm Clearance angle ground, Teeth ground HCS 60 3,0 mm F 1 C 5 6.23992 Hard wood, Soft wood, Wood-core plywood, Fibre boards 10-40 mm Clearance angle ground, Teeth ground HCS 60 4,0 mm F 1 D 5 6.23993 FOR METAL, "CLASSIC" SERIES Sheet steel, 0.5-1.5 mm Milled, Crimped HSS 50 0,7 mm F 18 G 5 6.23996 FOR METAL, "PROFESSIONAL" SERIES Sheet steel, 1-3 mm Milled, Crimped BiM 60 1,2 mm F 18 AF 5 6.23994 Sheet steel, 2.5-6 mm, Plastics Milled, Crimped BiM 60 2,0 mm F 18 BF 5 6.23995 FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES Aluminium, Non-ferrous metals 3-15 mm, Pipes up to 30 mm, Profiles up to 30 mm Milled, Crossed BiM 75 3,0 mm F 127 DF 5 6.23997 Jig saw blades with universal shank Suitable for Black & Decker, Skil, Kress and others Material suitability Version Material Usable length mm Tooth pitch Corre- sponds to Bosch type Packing unit Order no. FOR WOOD, "CLASSIC" SERIES Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 5-50 mm, For clean cuts Milled, Crossed HCS 74 3,0 mm U 111 C 5 6.23945 FOR WOOD, "PROFESSIONAL" SERIES Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 5-50 mm Ground, Crossed HCS 82 4,0 mm U 144 D 5 6.23944 Hard wood, Soft wood, Plywood, Coated boards, 1.5-15 mm, Especially for curved cuts Clearance angle ground, Tapered HCS 52 1,3 mm U 1 AO 5 6.23936 Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 10-45 mm, For clean cuts Clearance angle ground, Teeth ground HCS 82 2,5 mm U 101 B 5 6.23943 Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 10-45 mm, For clean cuts Clearance angle ground, Teeth ground HCS 82 4,0 mm U 101 D 5 6.23942

Material suitability Version Material Usable length mm Tooth pitch Corre- sponds to Bosch type Packing unit Order no. FOR WOOD, "PROFESSIONAL" SERIES, BIM Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 5-50 mm, For quick cuts Ground, Crossed BiM 74 4,0 mm U 144 DF 5 6.23904 Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 3-30 mm, Coated boards, For clean cuts Clearance angle ground, Teeth ground BiM 82 2,5 mm U 101 BF 5 6.23905 FOR WOOD, "PIONEER" SERIES Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 2-65 mm, For quick cuts Clearance angle ground, Teeth ground HCS 90 2,0-3,0 mm, progressiv U 234 X 5 6.23903 FOR WOOD AND METAL, "PIONEER" SERIES Wood, Wood with nails, Metal, Non-ferrous metals, Plastics Milled, Crossed BiM 107 2,4 - 5,0 mm, progressiv U 345 XF 5 6.23906 FOR METAL, "CLASSIC" SERIES Sheet steel, 0.5-1.5 mm Milled, Crimped HSS 52 0,7 mm U 118 G 5 6.23938 Sheet steel, 1-3 mm Milled, Crimped HSS 52 1,2 mm U 118 A 5 6.23941 Sheet steel, 2.5-6 mm Milled, Crimped HSS 52 2,0 mm U 118 B 5 6.23940 FOR METAL, "PROFESSIONAL" SERIES Sheet steel, 1-3 mm Milled, Crimped BiM 52 1,2 mm U 118 AF 5 6.23907 Sheet steel, 2.5-6 mm Milled, Crimped BiM 74 2,0 mm U 118 BF 5 6.23937 FOR METAL, "PIONEER" SERIES Sheet steel, 1.5-10 mm, Pipes, Profiles up to 30 mm Milled, Crossed HSS 74 1,2 - 2,6 mm, progressiv U 123 X 5 6.23909 FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES Aluminium, Non-ferrous metals 3-15 mm, Pipes, Profiles up to 30 mm Milled, Crossed HSS 74 3,0 mm U 127 D 5 6.23939

Jig saw blades with Makita shank Suitable for Makita jigsaws Material suitability Version Material Usable length mm Tooth pitch Corres- ponds to Bosch type Packing unit Order no. FOR WOOD, "CLASSIC" SERIES Soft wood, Plywood, Chipboards, Wood-core plywood, Fibre boards 3-15 mm, Especially for curved cuts Milled, Crossed HCS 62 2,5 mm MA 119 HO 5 6.23958 Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 4-50 mm, For rough cuts Milled, Crossed HCS 62 3,0 mm MA 111 C 5 6.23955 FOR WOOD, "PROFESSIONAL" SERIES Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 4-50 mm, For quick cuts Ground, Milled HCS 82 3,0 mm MA 144 CD 5 6.23919 Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards, Plastics, 3-30 mm, For clean cuts Clearance angle ground, Teeth ground HCS 62 2,7 mm MA 101 BC 5 6.23959 FOR WOOD, "PIONEER" SERIES Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 2-65 mm, For quick cuts, For clean cuts Clearance angle ground, Teeth ground HCS 92 progressiv, 2,0-3,0 mm MA 234 X 5 6.23911 FOR WOOD AND METAL, "PIONEER" SERIES Wood, up to 65 mm, Wood with nails, Metal sheets, Pipes, Aluminium, Plastics, 3-10 mm Milled, Crossed BiM 102 progressiv, 2,5-5,0 mm MA 345 XF 5 6.23912 FOR METAL, "CLASSIC" SERIES Sheet steel, 1-3 mm Milled, Crimped HSS 62 1,0 mm MA 118 A 5 6.23957 Sheet steel, 2.5-6 mm, Milled, Crimped HSS 62 1,8 mm MA 118 B 5 6.23956 FOR METAL, "PROFESSIONAL" SERIES Sheet steel, 1-3 mm Milled, Crimped BiM 62 1,0 mm MA 118 AF 5 6.23916 Sheet steel, 2.5-6 mm Milled, Crimped BiM 62 1,8 mm MA 118 BF 5 6.23917 FOR METAL, "PIONEER" SERIES Sheet steel, 1-10 mm, Pipes, Profiles up to 30 mm Milled, Crossed HSS 77 progressiv, 1,0-2,6 mm MA 123 X 5 6.23914 FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES Aluminium, Non-ferrous metals 3 -15 mm, Pipes, Profiles up to 30 mm Milled, Crossed HSS 62 3,0 mm MA 127 D 5 6.23918