Metra Electronics 99-7610B Installation Instructions Manual

99-7610B 99-7610HG 2007-up Nissan Versa 2011 Nissan Juke KIT FEATURES • DIN head unit provisions with pocket • ISO DIN head unit provision with pocket • Double DIN mount radio provision • B = Matte Black • HG = Gloss Black • 70-7552 - 2007-up Nissan Harness • 40-NI12 - 2007-up Nissan Antenna Adapter KIT COMPONENTS WIRING AND ANTENNA CONNECTIONS (Sold Separately) A TOOLS REQUIRED: Panel Removal Tool • Phillips Screwdriver Socket Wrench 1-800-221-0932 © COPYRIGHT 2011 METRA ELECTRONICS CORPORATION metraonline.com B D C A) Radio Housing • B) ISO Brackets • C) Trim Plate • D) DDIN Trim Plate METRA. THE WORLD’S BEST KITS.™ APPLICATIONS INSTALLATION INSTRUCTIONS FOR PART 99-7610

- Nissan Juke 2011....................................................................................2 Kit Assembly - DIN Mount Radio Provision with Pocket .................................................. 3 - ISO Mount Radio Provision with Pocket ...............................................4-5 - Double DIN Mount Radio Provision ..........................................................6 TABLE OF CONTENTS Caution Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition. Note: Refer also to the instructions included with the aftermarket radio. KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians INSTALLATION INSTRUCTIONS FOR PART 99-7610

the radio. (Figure A, B) 2. Remove (2) Phillips screws securing the radio trim panel then unclip and remove the entire panel surrounding the radio and a/c controls. (Figure C) 3. Remove (4) Phillips screws securing radio, unplug and remove radio. (Figure D) Continue to kit assembly. Figure A Figure B Figure C Figure D 99-7610 DASH DISASSEMBLY 2007-UP NISSAN VERSA

panel. (Figure A) 2. Remove (2) Phillips screws securing the radio trim panel. (Figure B) 3. Remove (4) Phillips screws securing radio, unplug and remove radio. (Figure C) Continue to kit assembly. 99-7610 DASH DISASSEMBLY 2011 NISSAN JUKE Figure A Figure B Figure C

market radio’s trim ring if equipped. 1. Cut and remove the appropriate tabs not necessary for your application. (Figure A) 2. Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down. (Figure B) 3. Slide the aftermarket head unit into the cage and secure. (Figure C) 4. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 5. Attach the trim plate supplied with the kit to the front of the radio housing assembly. (Figure C) 6. Reassemble dash in reverse order of disassembly. Nissan Versa Nissan Juke Nissan Juke 99-7610 Figure A Figure C Figure B DIN HEAD UNIT PROVISION

need to be made to both ISO brackets when using the ISO mount radio provision. Cut or trim the area shown from the ISO bracket. (Figure A) 1. Cut and remove the appropriate tabs not necessary for your application. (Figure B) Continued on page 5. Figure A 99-7610 4 ISO MOUNT RADIO PROVISION Nissan Versa Nissan Juke Nissan Juke Figure B

unit with the screws supplied with the unit. (Figure C) 2. Slide the head unit into the radio opening until the side clips engage. (Figure D) 3. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 4. Attach the trim plate supplied with the kit to the front of the radio housing assembly. (Figure D) 5. Reassemble dash in reverse order of disassembly. Figure C Figure D 99-7610 5

(removed from factory radio during disassembly) to the sides of the double DIN radio using screws supplied with the double DIN radio. (Figure A) 2. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 3. Place the DDIN trim plate on the front of the DDIN radio. (Figure B) 4. Reassemble dash in reverse order of disassembly. Figure A Figure B 99-7610 6 DOUBLE DIN MOUNT RADIO PROVISION

1-800-221-0932 © COPYRIGHT 2011 METRA ELECTRONICS CORPORATION metraonline.com METRA. THE WORLD’S BEST KITS.™