Metra Electronics ESP-602R Operation & User’s Manual

Rack Mount Home Theater Power Center User Guide Model ESP-602R © Copyright 2011 Metra Electronics The informa� on contained herein is subject to change without no� ce. This document contains proprietary informa� on protected by copyright law. No part of this document may be photocopied or reproduced without prior wri� en consent.

INTRODUCTION Thank you for purchasing the Power Manager 2000. Your new rack mountable home theater power manager provides clean AC power to sensi� ve home theater electrical equipment. Six always on plus six switched outlets (twelve total) provide premium audio and video output with surge protec� on and noise fi ltering. Addi� onal connec� ons supply Ethernet and telephone/data line condi� oning protec� on along with three pairs of DSS/coaxial connec� ons for cable protec� on. Features • Four kinds of fi lter circuitry isolates and protects audio, video, digital and high current equipment. • LCD display shows voltage and amperage levels. • System provides overload protec� on with a 120V/15A electrical ra� ng. • Remote 110V and 12V DC trigger allows remote turn on/off of switched outlets. • Telephone/data line, Ethernet (network) and DSS/coax surge protec� on provided. • A total of twelve outlets includes 6 switched and 6 always on. • Rack mountable system features sturdy metal housing. Safety Information • To reduce the risk of electrical shock, unplug the Power Manager and allow it to cool before cleaning. • There are no replaceable parts in the Power Manager 2000. Do not a� empt to disassemble this unit for any reason. • Use in an indoor, dry loca� on only. POWER MANAGER 2000 Page 2 Page 1 POWER MANAGER 2000 Introduc� on ....................................................................................................2 Features ..............................................................................................................2 Safety Informa� on ..............................................................................................2 Package Contents ............................................................................................3 Installa� on ......................................................................................................3 Descrip� ons ....................................................................................................4 Connec� ons ....................................................................................................5 Opera� on ........................................................................................................6 Remote Trigger Opera� on...................................................................................6 Remote AC Opera� on ........................................................................................6 LCD Control Panel ...............................................................................................7 LED Indicators .....................................................................................................7 Specifi ca� ons ..................................................................................................8 Physical ...............................................................................................................8 Electrical ..............................................................................................................8

an equipment rack installed inside a cabinet. Refer to Figure 1 when a� aching the moun� ng brackets to the Power Manager. NOTE: Moun� ng bracets sold separately. Figure 1 - Op� onal Rack Installa� on Page 3 POWER MANAGER 2000 POWER MANAGER 2000 Page 4 • Home Theater Power Manager • This User Manual PACKAGE CONTENTS

2. LCD Display – Monitor the Power Manager’s main func� ons. 3. LED Power Indicators – Monitor ground, protec� on and switched power statuses. 4. Bank 1 Digital Filter – Connect digital components to reduce line noise and interference. 5. Bank 2 Digital Filter – Connect digital components to reduce line noise and interference. 6. Bank 3 Video Filter – Connect video components to reduce line noise and interference. 7. Bank 4 Audio Filter – Connect audio components to reduce line noise and interference. 8. Always On Indicator – Use the green indicators to determine when the switched outlets are turned “on.” 9. Remote AC IN – Connect a remote AC control cable to turn your Power Manager on/off through a preamplifi er or receiver equipped with a switched AC power outlet. 10. DC IN – Control the Power Manager using the remote trigger func� on of another power management unit. 11. Telephone Line Input/Output – Protect your internal modem, TEL/FAX, or DSL lines from power surges and spikes. 12. DSS/Coax Line Input/Output – Protect coaxial cable lines from power surges and spikes that can disturb and damage your equipment. 13. Ethernet Network Input/Output – Protect your Ethernet network line access from power surges and spikes. 14. Ground – Use as a common grounding point for ungrounded devices. 15. 15-Amp Overload Resetable Circuit Breaker – The circuit breaker provides overload protec� on with a manually recoverable func� on. 1 3 2 Figure 2 - Front View Controls and Indicators 8 4 5 6 7 9 12 10 13 11 14 15 Figure 3 - Rear View Controls POWER MANAGER 2000 Page 6 Page 5 POWER MANAGER 2000

Bank 1 (Digital Filter) DVD DVR HDTV Cable Satellite Bank 2 (Digital Filter) DVD DVR HDTV Cable Satellite Bank 3 (Video Filter) VCR TV Monitor Bank 4 (Audio Filter) Tape Deck CD Player Receiver Auxiliary Category Figure Recommended Connec� ons Telephone/ Data Line Connect your modem, telephone line or fax lines to these standard RJ11 phone jacks. The Power Manager includes one IN port and two OUT ports. LAN (Local Area Network) Line Connect local area network cables to these standard RJ45 Ethernet jacks. DSS/Coaxial Cable Lines Connect your cable TV, satellite TV, antenna, HDTV, broadband or other coaxial cable lines. POWER MANAGER 2000 Page 8 Page 7 POWER MANAGER 2000

Page 10 Page 9 POWER MANAGER 2000 OPERATION Remote Trigger Operation This power manager can be controlled remotely by another power manager equipped with a remote trigger out feature. To use remote trigger control, connect a remote DC cable from the “DC OUT” connec� on on the power manager equipped with remote trigger out to the “DC IN” connec� on (Figure 4) on the Power Manager 2000. Figure 4 - DC IN Connec� on Remote AC Operation The Remote AC func� on enables you to turn your Power Manager on or off using a preamplifi er or receiver equipped with a switched AC power outlet. NOTE: You cannot use the POWER bu� on on the front of the unit to turn the Power Manager on/off while an exis� ng external power signal is supplied to either the AC or DC remote input connector. To install a remote AC control cable: 1. Plug the female end of the remote AC control cable into the “Remote AC IN” outlet (Figure 5) located on the back of the Power Manager. Figure 5 - Remote AC IN Connec� on 2. Turn the Power Manager off . 3. Plug the 2-pronged male end of the remote AC control cable into a switched power outlet on a preamplifi er or receiver. When the receiver or preamplifi er is turned on, the switched outlets on the Power Manager 2000 will turn on automa� cally.

user to monitor input voltage and output current. 20 5.0 VOLTS CURRENT Figure 6 - LCD Panel • “VOLT” indicates the input voltage from the AC wall outlet. • “AMPS” indicates the output current from the outlet banks. LED Indicators The LED indicators on the front panel (Figure 7) allow you to monitor important power and safety informa� on. GROUNDED PROTECTED SWITCHED POWER Figure 7 - Front Panel LED Indicators • “GROUNDED” indicates the status of the AC outlet. Green indicates that the AC wall outlet is properly grounded. • “PROTECTED” indicates the status of the Power Manager surge protec� on. Yellow indicates that the surge protec� on is turned on. • “SWITCHED POWER” indicates whether the “Switched” outlets are ON or OFF. Page 11 POWER MANAGER 2000 POWER MANAGER 2000 Page 12

Electrical Electrical Ra� ng 120V/15A Clamping Voltage L-N 330V, L-G 500V, N-G 500V Surge Energy Joule Ra� ng 6495J Maximum Peak Spike Current 432000A Maximum Spike Voltage 6KV EMI/RFI Noise Filter SURGE X2 Capacitor (uF) 0.22uF*2 Coil (T) 8uH*2 Frequency (KHz) 150KHz~100MHz A� enua� on (dB) up to 45dB EMI/RFI Noise Filter DIGITAL OUTLETS (Banks 1 & 2) X2 Capacitor (uF) 1uF*3 Coil (T) 850uH*2 Frequency (KHz) 150KHz~100MHz A� enua� on (dB) up to 65dB EMI/RFI Noise Filter VIDEO OUTLETS (Bank 3) AUDIO OUTLETS (Banks 4) X2 Capacitor (uF) 1uF*3 Coil (T) 1.4mH*2 Frequency (KHz) 150KHz~100MHz A� enua� on (dB) up to 70dB Electrical (continued) DC Trigger Input Jack ψ 3.5 Voltage 3~30V Current Requirement 10mA LAN Circuit Connectors RJ45 Wires Protected 1, 2, 3, 6 Communica� on Speed 10 Base Tel/Fax/Modem Energy (Joules) 160J Let Through Voltage (V) <40V DSS/COAX Cable Protec� on Surge Arrestor Gas Tube Breakdown Voltage 75V Inser� on Loss @10MHz <0.1dB Connectors 3 Pairs, Gold Plated NOTE: Specifi ca� ons subject to change without no� ce. POWER MANAGER 2000 Page 14 Page 13 POWER MANAGER 2000