Micronics 60/66MHz Manual
Text of the manual
60/66MHz Pentium Processor
System Board Manual
Document Number: 06-00096-05, Rev. 1B
October 1994
221 Warren Ave., Fremont, CA 94539-7085
Micronics Computers, Inc.
The information contained in the M5Pi system board manual has been
carefully checked and is believed to be accurate. Micronics assumes no
responsibility for any inaccuracies that may be contained in this document.
Micronics makes no commitments to update or to keep the information in this
manual at a current level
Micronics Quick Installation
We know that many experienced people prefer to read as little of the documen-
tation as possible. If this sounds like you, here’s the short form:
1.
Ground yourself to prevent damaging static discharge, then remove
the M5Pi from its packaging.
2.
Configure and verify the system board’s jumper settings. (See
Jumper Sett
to configure. Press with Auto selected and the BIOS will
automatically configure the drive for you. (See Chapter 4)
9.
After you have configured the Main Setup menu, make any desired
setting configurations in the Advanced and Security menu. When
finished, go to the exit screen, select “Save Changes and Exit,” and you
are finished with the
Features ..................................................................................... 1-2
Software Compatibility ............................................................... 1-2
Configuring the M5Pi ...................................................
