Mio H610 Operation & User’s Manual

respective companies. Note Information in this manual is subject to change without notice.

Warnings and Notices.............................................................................v 1 Getting Started..................................................................................1 1.1 Understanding Hardware Components................................................ 1 Front Components ............................................................................... 1 Back Components................................................................................ 2 Left-Side Components ......................................................................... 2 Right-Side Components....................................................................... 3 Top Components.................................................................................. 4 Bottom Components ............................................................................ 4 1.2 Performing the Initial Start Up.............................................................. 5 1.3 Connecting to AC Power and Charging the Battery............................. 7 1.4 Using Your Device in a Vehicle............................................................ 8 Using the Device Holder ...................................................................... 8 Connecting the In-Car Charger............................................................ 8 1.5 Operating Basics.................................................................................. 9 Turning On and Off .............................................................................. 9 Operating the Device ........................................................................... 9 Home Screen ..................................................................................... 10 Locking Your Device .......................................................................... 11 Inserting a SD/MMC Card.................................................................. 12 1.6 Changing the Faceplate..................................................................... 12 1.7 Connecting the Earphones with the Remote Control......................... 13 2 Travel Kit—Compass......................................................................15 2.1 Starting and Exiting Compass............................................................ 15 2.2 Notes on Using Compass .................................................................. 16 2.3 Calibrating the Compass.................................................................... 17 3 Travel Kit—WorldMate ...................................................................19 3.1 Starting and Exiting WorldMate.......................................................... 19 3.2 Clocks................................................................................................. 21

3.3 Map .................................................................................................... 23 3.4 Weather.............................................................................................. 23 Selecting a City .................................................................................. 24 3.5 Currency Converter............................................................................ 25 Adding, Editing, or Deleting the Exchange Rate................................ 25 3.6 Measurements.................................................................................... 27 3.7 Clothing .............................................................................................. 27 3.8 Area Codes ........................................................................................ 28 3.9 Packing List........................................................................................ 29 Adding, Editing, or Deleting Items...................................................... 29 Adding, Editing, or Deleting Categories............................................. 30 3.10 Tip, Tax Calculation ........................................................................... 31 3.11 Calculator ........................................................................................... 32 3.12 WorldMate Data Update..................................................................... 32 Installing WorldMate Data Update Tool ............................................. 32 Updating the WorldMate Data............................................................ 34 4 Contacts ..........................................................................................35 4.1 Starting and Exiting Contacts............................................................. 35 4.2 Using the Contacts List ...................................................................... 36 4.3 Using the Summary Screen ............................................................... 36 4.4 Navigating to a Contact’s Address..................................................... 37 4.5 Managing Contacts ............................................................................ 38 Adding a Contact................................................................................ 38 Editing a Contact................................................................................ 40 Deleting a Contact.............................................................................. 40 5 MioPlayer—MP3 Player..................................................................41 5.1 Starting and Exiting MP3 Player ........................................................ 41 5.2 Preparing the MP3 Files for You Device............................................ 42 5.3 Playing MP3 Files .............................................................................. 42 5.4 MP3 Playback Controls...................................................................... 43 5.5 Displaying Lyrics ................................................................................ 44 Preparing the Lyric File for your Device............................................. 44 Playing Songs with Lyrics .................................................................. 44 5.6 Using the Play Lists............................................................................ 45 Creating a Play List............................................................................ 45 Opening a Play List............................................................................ 47 5.7 Equalizer ............................................................................................ 48 6 MioPlayer—Video Player................................................................49 6.1 Starting and Exiting Video Player....................................................... 49

6.3 Playing Video Clips ............................................................................ 50 6.4 Video Playback Controls.................................................................... 52 7 MioPlayer—Photo Viewer ..............................................................53 7.1 Starting and Exiting Photo Viewer ..................................................... 53 7.2 Preparing the Pictures for Your Device.............................................. 53 7.3 Viewing Pictures in Thumbnail View .................................................. 54 7.4 Viewing a Picture in Full Screen ........................................................ 54 7.5 On-Screen Control Buttons................................................................ 55 7.6 Viewing the Slideshow ....................................................................... 57 7.7 Transferring Pictures.......................................................................... 58 8 Settings............................................................................................61 8.1 Starting and Exiting Settings.............................................................. 61 8.2 Backlight............................................................................................. 62 8.3 Volume ............................................................................................... 63 8.4 Screen................................................................................................ 64 8.5 Power ................................................................................................. 65 8.6 Date&Time ......................................................................................... 66 8.7 Change Language.............................................................................. 68 9 Games..............................................................................................69 9.1 Starting and Exiting Games ............................................................... 69 10 Mio Transfer ....................................................................................70 10.1 About Mio Transfer............................................................................. 70 10.2 Installing Mio Transfer........................................................................ 71 10.3 Copying MP3/ Video/ Pictures to Your Device................................... 73 Managing Your Files .......................................................................... 75 10.4 Copying Contacts Information to Your Device................................... 75 10.5 Recovering Your Device .................................................................... 76 11 Video ToolBox.................................................................................79 11.1 About Video ToolBox ......................................................................... 79 11.2 Installing Video ToolBox..................................................................... 79 11.3 User Interface..................................................................................... 81 11.4 Four Steps to Create a Video File...................................................... 82 Step 1: Determine Video Output Setting............................................ 82 Step 2: Add/Edit Media Clip ............................................................... 82 Step 3: Choose Style ......................................................................... 83 Step 4: Create Video File................................................................... 84

Inserting Clips into Your Project......................................................... 85 Capturing Digital Video ...................................................................... 85 Capturing Analog Video ..................................................................... 86 Capturing Still Images........................................................................ 86 11.6 Editing Video Clips............................................................................. 87 Trimming a Clip .................................................................................. 88 Trimming a Video into Multiple Clips.................................................. 89 11.7 Creating an Image Slideshow ............................................................ 91 11.8 Choosing a Style ................................................................................ 92 Selecting a Movie Style...................................................................... 92 Changing the Transition Effect........................................................... 93 Editing Text ........................................................................................ 93 Change the Background Music.......................................................... 94 12 Troubleshooting and Maintenance ...............................................95 12.1 Resetting Your System ...................................................................... 95 12.2 Troubleshooting ................................................................................. 96 Power Problems................................................................................. 96 Screen Problems................................................................................ 96 Connection Problems......................................................................... 97 GPS Problems.................................................................................... 97 12.3 Maintaining Your Device .................................................................... 98 13 Regulatory Information ..................................................................99 13.1 Regulations Statements..................................................................... 99 Class B Regulations........................................................................... 99 European Notice .............................................................................. 100 13.2 Safety Precautions........................................................................... 101 About Charging ................................................................................ 101 About the AC charger/ In-car charger.............................................. 101 About the Battery ............................................................................. 102

� For your safety, do not operate the controls of the product while driving. � Use this product with caution. The product is a navigation aid. It does not provide exact measurements of direction, distance, location or topography. � The calculated route is for reference only. Always follow the posted traffic signs, speed limits and road restrictions. � Do not leave your device in a car under direct sunlight, without air-condition, or without adequate ventilation. This can cause the device to overheat and malfunction. � When the device is overheated, be sure to remove it right away from the overheated area and place it to a place with cool air. Once the device gets back to its normal temperature, it can start functioning again. � The Global Positioning System (GPS) is operated by the United States government, which is solely responsible for its performance. Any change to the GPS system can affect the accuracy of all GPS equipment world-wide. � GPS satellite signals cannot typically pass through solid materials (except glass). GPS location information is not typically available inside buildings, tunnels, or underground parking lots. � A minimum of 4 GPS satellite signals is needed to calculate your GPS position. Signal reception can be affected by weather events or overhead obstacles (e.g. dense foliage and tall buildings). � Other wireless devices in the vehicle may interfere with the reception of satellite signals and cause the reception to be unstable.

device in an appropriate place, so as not to obstruct the driver’s view, or deployment of airbags. Do not mount where the driver’s field of vision is blocked. Do not place on the dashboard unsecured. Do not mount in front of airbag panels. Do not mount in front of an airbag field of deployment.

1.1 Understanding Hardware Components NOTE: Depending upon the specific model purchased, the color of your device may not exactly match the device shown in this manual. Front Components Ref Component Description Glows in bright amber to indicate that the battery is charging, and turns green when the battery is fully charged. � Charge Indicator Flashes in green when the device is in a suspend state. � Touch Screen Displays the output of your device. Tap the screen with your fingertip to select menu commands or enter information. � Hand String Hole Hand string attaches to this hole.

Connector This connector (under rubber dust cover) allows use of an optional external antenna with magnetic mount, which may be positioned on top of the car for better signal reception in areas with poor reception. � Speaker For music, sounds and voice prompts. Left-Side Components Ref Component Description � Menu Button Displays the Home screen.

Accepts an SD (Secure Digital) or MMC (MultiMediaCard) card for accessing data such as MP3 music. � Reset Button Restarts your device (soft reset). � Lock Switch Locks and unlocks the device.

� Power Button Turns the device on and off. Bottom Components Ref Component Description � Earphones Connector Connects to earphones. � Mini-USB Connector Connects to the AC charger or USB cable.

1. Make sure that power is supplied to your device. (See the next section.) 2. For the initial start up, press the power button for five seconds to turn on your device. NOTE: For normal operation, briefly press the power button to turn on and off your device. 3. The language setting screen appears. You can tap the left/right arrow to select a language. Then, tap . 4. The date/time setting screen appears. Tap the appropriate arrow button to select the time zone, date, and time. Then, tap .

Battery When charging the battery for the very first time, you should charge it for at least 6 hours. 1. Slide and click the AC converter onto the AC charger. 2. Connect the adapter cable to the bottom of your device. 3. Plug the AC charger into a wall outlet. 4. The charge indicator glows amber when charging is in progress. Do not disconnect your device from AC power until the battery is fully charged, when the charge indicator turns green. Charging may take a few hours. NOTE: � Do not immediately turn on your device after connecting the AC charger to charge a power-depleted battery. Wait for at least one minute. � Depending on your region of purchase, the AC converter may not look exactly the same as the picture shown. � Your device can also be charged when it is connected to a desktop computer via the USB cable. If you intend to charge your device in this way, turn off your device so that it takes less time to charge the battery. CAUTION: For optimal performance of the lithium battery: � Do not charge the battery where the temperature is high (e.g. in direct sunlight). � There is no need to fully discharge the battery before charging. You can charge the battery before it is discharged. � When storing the product for a long period of time, be sure to fully charge the battery at least once every two weeks. Over discharge of the battery can affect the charging performance. Converter

Using the Device Holder CAUTION: � Select an appropriate location for the device holder. Never place the holder where the driver’s field of vision is blocked. � If the car’s windshield is tinted with a reflective coating, an external antenna (optional) may be needed to route the antenna to the top of the car through a window. When closing the car window, be careful not to pinch the antenna cable. (Cars with an anti-jam window design may automatically leave adequate space as needed.) Use the device holder to mount your device in a vehicle. Make sure that the GPS antenna has a clear view of the sky. (See the Quick Start Guide supplied with the device for the installation instruction.) NOTE: Depending upon the specific model purchased, the device holder supplied with your device may not look exactly the same as the picture shown. Connecting the In-Car Charger The in-car charger supplies power to your device when you are using the device in a car. CAUTION: To protect your device against sudden surges in current, connect the in-car charger only after the car engine has started. 1. Connect one end of the in-car charger to the power connector of your device. 2. Connect the other end to the 12-volt cigarette lighter or power port to power and charge your device. The indicator light on the in-car charger lights in green to indicate that power is being supplied to your device.

Turning On and Off Briefly press the power button to turn on and off your device. When you press the power button to turn off, your device enters a suspend state. The system stops operating and the charge indicator flashes in green. NOTE: In case you turn off the power by pressing the power button for five seconds, you will need to press the power button for five seconds again for turning on. You will then see the initial start up screen. Operating the Device To operate your device, touch the screen with your fingertip. You can perform the following actions: � Tap Touch the screen once with your fingertip to open items or select onscreen buttons or options. � Drag Hold your fingertip on the screen and drag up/down/left/right or across the screen. � Tap and hold Tap and hold your fingertip until an action is complete, or a result or menu is shown.

screen is your starting place for various tasks. Tap a button to start a task or open another menu. You can access the Home screen at any time by pressing the Menu button on the side of your device. Ref Button Name Description For Detailed Information Includes Compass and WorldMate. Chapters 2~3 Compass shows direction. Chapter 2 � Travel Kit WorldMate provides useful tools for travelers such as clocks, weather forecast, currency converter, packing list, and more. Chapter 3 � Contacts Keeps a list of names, addresses, and phone numbers. Chapter 4 � Settings Customizes the system settings. Chapter 8 � MioMap Starts the navigation software. See the manual supplied with the software. � � � � � �

Description For Detailed Information Includes MP3 Player, Video Player, and Photo Viewer. Chapters 5~7 MP3 Player plays MP3 music. Chapter 5 Video Player plays video clips. Chapter 6 � MioPlayer Photo Viewer displays pictures. Chapter 7 � Game Provides various games. Chapter 9 Locking Your Device You can lock your device so that accidental touching of the device does not cause your device to operate. To lock your device, slide the lock switch upward to the locked ( ) position. When you touch the screen or press a device button, the lock icon appears as shown below. To unlock the device, slide the switch back to the unlocked ( ) position. Lock Unlock

Your device has an SD/MMC slot where you can insert an optional Secure Digital or MultiMediaCard storage card. To use a card, insert it into the slot, with the connector pointing to the slot and its label facing the front of the device. To remove a card, first make sure that no application is accessing the card, and then slightly push the top edge of the card to release it and pull it out of the slot. NOTE: � Make sure that no foreign objects enter the slot. � Keep a SD or MMC card in a well-protected box to avoid dust and humidity when you are not using it. 1.6 Changing the Faceplate Your device has a detachable faceplate. Your can replace it with an extra faceplate (optional) supplied with your device. 1. Firmly press the faceplate release button. 2. Pull the upper part of the faceplate apart to detach it from the device. 3. To install the other faceplate, attach the lower part first and then fit the upper part into place.

Control Earphones and an earphones remote control are supplied with your device. The remote control provides basic control buttons for your device when the MP3 player function is in use. Play/Pause Stop Volume Next Previous

2.1 Starting and Exiting Compass Compass shows direction on the screen. Tap the Travel Kit button on the Home screen and tap the Compass button to start the program. � The Compass screen appears. When the status indicator is green, the letter “N” indicates the magnetic north. As you move the device, the compass rotates accordingly. NOTE: Calibrate the compass when using it for the very first time. (See section 2.3.)

. To exit the Travel Kit menu, tap . 2.2 Notes on Using Compass Follow these guidelines for an accurate electronic compass: � Hold the device level. � Keep the device away from objects that generate magnetic fields, such as cars, large belt buckles, computers, cell phones, etc. � If you must use the compass inside a car, the device should be at least 20 cm (7.87 inches) away from metal objects such as car doors, dashboard, air vents, etc. � Avoid playing the MP3 music with the internal speaker or connecting the AC adapter. This will cause the magnetic interference to the compass. Indicate the current direction. Open the Reset screen. Status indicator

Calibrate the compass whenever needed. For example: � When the status indicator appears in red. � When the device has not been used for a long time. � After significant environmental changes such as location changes and temperature fluctuations. 1. Have the device outdoors and away from metal objects and magnetic fields. 2. Tap on the Compass screen. � 3. Lay the device flat in your palm. With your palm facing up, swing your arm as shown on the screen. Do this several times until a message shows to indicate that the compass is calibrated.

button to go back to the Compass screen. Once the calibration is completed, the status indicator turns green.

3.1 Starting and Exiting WorldMate WorldMate provides useful tools for travelers such as clocks, weather forecast, currency converter, packing list, and more. 1. Tap the Travel Kit button on the Home screen. 2. Tap the WorldMate button to start the program. � 3. If this is the first time you use WorldMate after initiating your device, the city list appears. Select your home city from the list. Your home clock along with four other clocks appears.

you will see the screen of the service that you used last time. 5. Tap to go to the WorldMate main menu where you can select a service to use. (See later sections for details.) 6. To exit the program, tap on the WorldMate main menu.

NOTE: � The five major cities include your home city and four other cities which are Tokyo, Los Angeles, London, and Paris by default. � Make sure that you have set up the correct time zone, date, and time in Settings. (See Section 8.6 for information.) � Before you can view weather forecasts, you have to acquire the information through Internet and transfer the information to your device. (See Section 3.12 for more information.) Tap the Clocks button on the WorldMate main menu to open the screen as shown here. � To change any of the major cities, tap the city name and select from the city list. � To check the weather forecast of a city, tap . � To set the alarm, tap or . (See later section for details.)

Tap or to open the alarm setting screen. When the alarm goes off, a window pops up along with a sound if you have set one. You can tap the Dismiss button to close the Alarm and turn off the sound. Cancel and return to the previous screen. Save and return to the previous screen. Tap to activate the alarm (with a check in the checkbox). Tap Hour/Minute and tap or to increase or decrease the value. Tap AM or PM to switch to the other one. Tap to select the alarm sound. Tap to hear the sound. Tap the input field and tap to enter the message. Tap to activate the sound (with a check in the checkbox).

Tap the Map button on the WorldMate main menu to open the screen as shown. A flashing cross indicates the current city’s location on the map. � To select another city, tap the city name and select from the list. Or, tap the location on the map and the nearest city name will be shown. � To see the weather forecast of the city, tap . 3.4 Weather Using the global weather forecast service, you can get a 5-day weather forecast for over 38,000 locations worldwide. NOTE: Before you can view weather forecasts, you have to acquire the information through Internet and transfer the information to your device. (See Section 3.12 for more information.) Tap the Weather button on the WorldMate main menu to open the screen as shown. � Tap to view a 5-day weather forecast for the selected city. � Tap the C° or F° button to switch between Celsius and Fahrenheit. � To select another city, tap the city name and select from the list. (See later section for details.)

Tap the city name on the Weather screen to open the screen as shown. Tap to specify the way you search a city. The options are City List, City and Country and U.S. Zip Code. Save and return to the previous screen. This field varies with the setting of the previous item. It can be City, Country, or U.S. Zip Code. This field appears only if the first item is set to City and Country. Tap this field and tap to enter the city name. Cancel and return to the previous screen. Open the soft keyboard for entering information such as city name and U.S. zip code. NOTE: When manually entering a city name, use the English spelling. Do not spell the city name in other languages.

Use Currency Converter to convert currencies. Once you enter a value for a currency, two other currency values are displayed simultaneously. You can enter up to three values and the values will be automatically summed up. NOTE: You can acquire the latest exchange rates through Internet and transfer the information to your device. (See Section 3.12 for more information.) Tap the Currency Converter button on the WorldMate main menu to open the screen as shown. Adding, Editing, or Deleting the Exchange Rate Tap the Edit button on the Currency Converter screen to open the edit screen. Tap to switch to another currency. Tap to change the currency base. Page down Page up Add new currency. Save and return to the previous screen. Tap an input field and tap to enter the value. Sum of the above Three currencies are displayed simultaneously. Tap to select a different currency. Exchange rate. Tap to edit the exchange rate. Clear all the fields. Edit the exchange rate. (See later section for details.) Tap to edit the exchange rate for the selected currency.

button. Tap an input field and tap to enter the text or number. To edit a currency, tap the currency name. Then, tap the field you want to edit and tap to enter the text or number. To delete a currency, tap the currency name and tap the Delete button.

Tap the Measurements button on the WorldMate main menu to open the screen as shown. 3.7 Clothing Use Clothing to view the size conversion tables for USA, Europe, UK, and Japan. NOTE: Use the information as reference only. The actual size can vary among different manufacturers. Tap the Clothing button on the WorldMate main menu to open the screen as shown. Tap to select the type of measurements such as length and areas. Tap to select the unit to convert from. Tap to clear the input field. Tap the field and tap to enter the value. The converted value is displayed below. Tap to select a clothing category. Conversion table for the selected category and gender/age. Tap to select man, woman, or child. Tap to select the unit to convert to.

Use Area Codes to view the international dialing prefixes, and the US and Canadian area codes. Tap the Area Codes button on the WorldMate main menu to open the screen as shown. Page down Page up Tap a column title to change the sort order. Go to the next item. Go to the previous item. Tap to select a category.

Use Packing List as a note to help you pack your bags. Tap the Packing List button on the WorldMate main menu to open the screen as shown. Adding, Editing, or Deleting Items If the item you want to pack is not available in the built-in list, you can manually add it. Tap the button to open the edit screen. Select a category. Tap the text input field and tap to enter the name of the item. Tap to save the item and return to the previous screen. Tap to select a category for the packing list. Edit the selected item. Add new item. Go to the previous item. Go to the next item. Tap to select the items to be displayed: All, Checked, or Unchecked. Tap an item to check or uncheck it. A checked item in the All Items list will be added to My List. Tap a tab to display All Items or My List.

. In the edit screen, select a different category if needed. Tap the description field and tap to modify the text. To delete an item, tap the item in the list and tap . In the edit screen, tap the Delete button. Adding, Editing, or Deleting Categories To edit the category, tap the category list and select the last item Edit Categories... The editing screen appears as shown below. To add new category, tap to enter the category name and tap to add it to the list. To delete a category, select the category and tap .

Use Tip, Tax Calculation to calculate the recommended tip and tax amounts in over 30 countries worldwide. NOTE: The tip rate is provided as a reference only. You can manually change the tip and tax rates. Tap the Tip, Tax Calculation button on the WorldMate main menu to open the screen as shown. Tap to select the country you are visiting. Tap to select the service. Tap the input field and tap to enter the bill amount. Tap to include or exclude the item. Tap to edit the tax rate. Tap to edit the tip rate. Total amount

Tap the Calculator button on the WorldMate main menu to open the screen as shown. 3.12 WorldMate Data Update Use the WorldMate data update tool to update the latest weather forecasts and the currency exchange rates to your device. Installing WorldMate Data Update Tool 1. Turn on your computer and insert the Application DVD into the DVD-ROM drive of your computer. 2. Select the language. Change sign Backspace Clear all.

NOTE: � Make sure that Mio Transfer is installed before using the update tool. (See Section 10.2 for information.) � Make sure that the Internet connection on your computer is available before updating the WorldMate data. 1. Turn on your computer and your device. 2. Connect the mini-USB end of the USB cable to the bottom of your device and the other end to a USB port on your computer. 3. Click WMSync icon on the Windows Desktop to start the program. The WorldMate Transfer screen appears. 4. Click Update Now to start synchronization between your computer and your device. 5. The update process is completed when the progress bar disappears and the Stop Update button changes back to Update Now.

Contacts allows you to keep a list of names, addresses, and phone numbers. NOTE: If you have created Microsoft Outlook Contacts information on your computer, you can copy the information to your device. (See section 10.4 for information.) Tap the Contacts button on the Home screen to start the program. The contacts list appears. � To exit the program, tap .

After starting Contacts, the contacts list appears. It shows the names and phone numbers (mobile phone numbers by default) of your contacts. You can use the various buttons on the screen to search a contact, navigate to the address of a contact and so on. 4.3 Using the Summary Screen In the contact list, tapping a contact twice displays the summary screen of the contact. Tap twice to display the summary screen of a contact. Add a contact. Exit the program. Delete the selected contact. Tap one of the alphabet sets to quickly find a contact. Back Tap to scroll through the entry fields. Navigate to the address of the selected contact.

You can set a contact’s address as your GPS navigation destination. 1. Tap the Contacts button on the Home screen to start the program. 2. In the contact list, select the desired contact and tap . 3. Tap to select the home address or to select the work address. 4. The navigation program starts. (See the document supplied with the navigation software for more information.)

Adding a Contact 1. Tap the Contacts button on the Home screen to start the program. 2. Tap . 3. Tap an entry field twice. The soft keyboard appears. 4. Use the soft keyboard to enter the information in the field and tap OK.

You will need to scroll down to see all available fields. 6. Tap save the contact’s information and return to the contact list. Tap the soft keyboard to enter text and numbers. Enable/disable accent marks (umlauts). Switch to numeric keys. Switch between upper and lower cases.

To modify a contact’s information: 1. In the contact list, tap the contact twice to open the summary screen. 2. Tap twice the field you want to edit and use the soft keyboard to edit. 3. Tap to save the changes. Deleting a Contact In the contact list, select the contact you want to delete and tap .

5.1 Starting and Exiting MP3 Player MP3 Player turns your device into an MP3 player. It features: � Playback of MP3/WAV/WMA files � Basic playback controls such as play, pause, stop, next and previous � Playback includes single selection playback, repeat, single repeat, sampling playback, normal sequence and random sequence. � 11 preset equalizer audio profiles � Play list support � Background playing � Lyrics display Tap MioPlayer on the Home screen and tap to start the program. The control panel appears on the screen where you can easily control the player by tapping the control buttons. �

. 5.2 Preparing the MP3 Files for You Device Before using the program, have the MP3 files ready on either your device’s My Flash Disk\Mp3 folder or on a storage card. A tool called Mio Transfer is supplied for you to easily copy the files from your computer to the correct location. (See section 10.3 for information.) 5.3 Playing MP3 Files 1. If your files are in a storage card, insert the card into your device. 2. Tap MioPlayer on the Home screen and tap to start the program. 3. The program will search for the MP3 files in your device and in the storage card. When MP3 files are detected, they will be added to the play list. NOTE: You can create your own play lists for future playback. (See section 5.6 for details.) 4. To start the playback, tap . To control the playback, use the control buttons as described later. The MP3 player allows you to play the music in the background while using other functions of your device. You can exit the MP3 player while playing. The playback will continue. To stop the music, go back to the MP3 Player and tap .

tapped the screen within the preset time (30 seconds by default).The backlight will restore when you press the Power or Menu button or when the playback of the current play list has ended. 5.4 MP3 Playback Controls Control Button Name Description / Play/Pause Play or pause the playback. Stop Stop the playback. / Previous/ Next Play the previous or next file. / Volume Increase or decrease the volume. The indicator on the panel shows the current volume level. Exit Close the program and return to the Home screen. Play List Open play list. (See Section 5.6 for more information.) Equalizer Open the equalizer panel. (See Section 5.7 for more information.) Playback Mode Cycle through the following modes: Repeated playback of all files in sequence Repeated playback of all files in random order Sampling playback in sequence Sampling playback in random order Single playback of the current file Repeated playback of the current file Help Introduce the function and operation of each button. Tap a button to see a description line at the bottom of the screen. Video Player Switch to the Video Player.

NOTE: You can switch to Photo Viewer without stopping the music. A message will appear asking you if you want the music to be played in the background. 5.5 Displaying Lyrics The MP3 Player allows you to display the real-time lyric on the screen while playing songs. This feature is especially handy for you to sing along with the songs. Preparing the Lyric File for your Device To display the lyrics, you need to have the lyric files (.lrc) ready on your device’s My Flash Disk\Mp3\lyric folder. NOTE: You can search and download these .lrc files from the internet. Use the Mio Transfer to copy the lyrics to the correct location of your device. (See section 10.3 for information.) When copying a lyric file to your device, be sure to use the same filename as the audio file. For example, if a MP3 file is named My Love.mp3, the lyrics filename must be My Love.lrc. NOTE: When playing songs with lyrics, the 30s backlight shut off feature will be disabled. Playing Songs with Lyrics Tap to start the playback. As the song plays, the lyrics scroll line by line on the screen, with the current lyric line highlighted by a different color. The background image changes in turn at a specific time interval.

By default, the program automatically loads all MP3 files in the play list. You can also create your own play lists for future use. Creating a Play List 1. After starting MP3, tap on the control panel to open the play list screen. The screen shows the current play list. Back Play the selected file. Remove current song from the list. Save the play list. Open the list of play lists. Remove all songs from the list. Add song

. Select the folder containing your songs. 3. A screen appears displaying all the audio files. Tap the song(s) you wish to add and then tap . 4. To save the play list, tap . 5. The keyboard screen appears where you can change the default name of the play list. Rename the play list if you want. Tap OK when finished. Back Select all songs. Add the selected song(s) to the play list.

. Opening a Play List To open one of the play lists that you have created: 1. After starting MP3, tap on the control panel. 2. Tap to display all the play lists you have created. 3. Tap the play list you want to open and tap . 4. To return to the control panel, tap . Back Open the selected play list. Delete all the play lists. Delete the selected play list. Rename the selected play list.

to open the equalizer panel. Tap or to cycle through the available options: Default, Hall, 3D, Soft, Disco, Heavy, Dance, Classic, Jazz, Pop and Rock. Tap to save your selection and return to the control panel. Tap to cancel your selection and return to the control panel. To select the Default profile, tap .

6.1 Starting and Exiting Video Player CAUTION: DO NOT view videos while driving. It may be illegal in your state/country for a display showing a video to be in view of the driver. Video Player allows you to watch the video clips on your device. (See later section for the formats that your device supports.) Tap MioPlayer on the Home screen and tap to start the program. � To exit the program, tap . MioPlayer— Video Player

To play video clips, have the video files ready on either your device’s My Flash Disk\My Video folder or on a storage card. Note that your device only supports video files in the following formats: Formats Video Codec Audio Codec MP4 (.mp4) MPEG-4 SP AAC AVI (.avi) MPEG4 SP MP3 AVI (.avi) MPEG4 SP IMA-ADPCM AVI (.avi) H.263 BL MP3 MP4 (.mp4) H.263 BL AAC-LC QuickTime Movie (.mov) MPEG4 SP AAC-LC QuickTime Movie (.mov) H.263 BL AAC-LC ASF (.asf) WMV9 WMA WMV (.wmv) WMV9 WMA Use Video ToolBox supplied with your device to convert video files to the format supported by your device. (See section 11.4 for information.) A tool called Mio Transfer is supplied for you to easily copy the files from your computer to the correct location. (See section 10.3 for information.) 6.3 Playing Video Clips 1. If your files are in a storage card, insert the card into your device. 2. Tap MioPlayer on the Home screen and tap to start the program. 3. The program will search the matching files in the specific folder on your device and in all folders on a storage card. It then displays the video file list. You can press the Up or Down arrow button to go to next or previous page.

� The file information such as the length of the video and file size is displayed together with the file name. 4. To play a video file, tap the desired file in the list and tap . (See the next section for descriptions of the onscreen control buttons. 5. To watch the video in full screen, tap . To go back to the control panel, tap anywhere on the screen. Page down Play the selected file. Selected file/ Total number of files A frame indicates the file is selected Exit Page up Delete the selected file Switch to the Photo Viewer. Switch to the MP3 Player.

Use the onscreen control buttons to control the playback. To return to the video file list, tap . Pause/Play Playback mode: Repeat Single Back Rewind Stop Forward You can tap on a point along the track bar to move directly to a different location for the playback. Tap to watch the video in full screen. Increase the volume Decrease the volume. Volume indicator

7.1 Starting and Exiting Photo Viewer Photo Viewer allows you to view pictures in JPEG and BMP formats and view the slideshow of the pictures. NOTE: You can have music playing in the background when you use Photo Viewer. First start the playback in MP3 Player and then switch to the Photo Viewer. Tap MioPlayer on the Home screen and tap to start the program. � To exit the program, tap . 7.2 Preparing the Pictures for Your Device To view the pictures, have the picture files ready either on your device’s My Flash Disk\My Picture folder or on a storage card. A tool called Mio Transfer is supplied for you to easily copy the files from your computer to the correct location. (See section 10.3 for information.) MioPlayer— Photo Viewer

1. If your files are in a storage card, insert the card into your device. 2. Tap MioPlayer on the Home screen and tap to start the program. 3. The program will search the matching files in the specific folder on your device and in all folders on a storage card. It then displays the pictures in the thumbnail view. You can press the Up or Down arrow button to go to next or previous page. 7.4 Viewing a Picture in Full Screen When you tap a picture twice in the thumbnail view, the picture is displayed in full screen. To go back to the thumbnail view, tap anywhere on the screen to display the control buttons and then tap . Page down Start the slideshow. Selected file/ Total number of files A frame indicates the picture is selected. Exit Page up Delete the selected picture. Switch to the Video Player. Switch to the MP3 Player.

On-screen control buttons provide various functions and settings. Tap anywhere on the picture to display the buttons as shown. To close the buttons, tap the picture again. Button Name Description Transfer Transfers pictures between the device and the storage card. (See section 7.7 for detailed information.) Slideshow Starts the slideshow. (See section 7.6 for detailed information.) Interval Sets the length of time each slide is displayed before moving on to the next slide. Tap the button to switch to the next available option. 1 second 3 seconds 5 seconds Information Enables or disables the displaying of the name and date of the file.

Zoom Opens the zoom bar. Tap the button as many times as needed to zoom in to 1.2x, 1.5x, 1.8x, or 2.0x. When you have zoomed in the picture, you can drag the picture to view other parts of the picture. To close the zoom bar, tap . Back Goes back to the thumbnail view.

To view the slideshow of all your pictures, use one of the following ways: � When in the thumbnail view, tap to start the slideshow. � When in full screen, tap anywhere on the picture to display the on-screen control buttons. Then tap to start the slideshow.

stop the slideshow, tap anywhere on the screen. 7.7 Transferring Pictures You can copy pictures from your device to your storage card or from your storage card to your device. 1. In full screen view, tap anywhere on the picture to display the control buttons. 2. Tap . 3. Select one of the two ways to transfer pictures, either from the device to the storage card or from the storage card to the device. Transfer pictures from the device to the storage card. Transfer pictures from the storage card to the device.

pictures. You can also tap to select all pictures in the source folder. 5. After selecting the picture(s), tap to start the file transfer. 6. Once the transfer is completed, tap to end the transfer. Then tap to go back to the preview screen. Back Transfer Select all. A frame indicates that the picture is selected.

You can customize the system settings such as backlight brightness, volume, and language. Once you change the settings, the new settings will remain until you change them again. Tap the Settings button on the Home screen. The Settings menu appears as shown below. � To exit Settings, tap . The following sections describe the various buttons and their functions.

2. Tap the Backlight button. 3. Move the knob along the track bar to adjust the brightness of the backlight. To darken the backlight, move the knob to the left. To lighten the backlight, move the knob to the right. 4. Tap to save the changes.

2. Tap the Volume button. 3. Move the knob along the track bar to adjust the volume. To decrease the volume, move the knob to the left. To increase the volume, move the knob to the right. 4. Tap to save the changes.

1. Tap the Settings button on the Home screen. 2. Tap the Screen button. 3. Tap to start the calibration. 4. Tap and hold the centre of the target.

target. Repeat each time to complete the calibration process. 6. When completed, tap . 8.5 Power To check the remaining power level of your battery and/or set up the power saving feature: 1. Tap the Settings button on the Home screen. 2. Tap the Power button. 3. The screen shows the remaining power of your battery.

set period of time. The options include Never, 30 minutes, 20 minutes, and 10 minutes. 4. Tap to save the changes. 8.6 Date&Time 1. Tap the Settings button on the Home screen. 2. Tap the Date&Time button. 3. To change the time zone, tap the left/right arrow in the “Time Zone” item.

up. Tap the left arrow on the calendar to go to the earlier month and year or the right arrow to the later month and year. Alternatively, you can tap the month or year on top of the calendar to directly change the month or year. When the calendar shows the current month, tap the date on the calendar. 5. To set the time, first tap the hour, minute, or second in the “Time” item and then tap the up arrow to increase or down arrow to decrease the value. 6. Tap to save the changes.

NOTE: To change the language of the Mio Map navigation software, use Mio Map settings. (See the document supplied with the navigation software.) 1. Tap the Settings button on the Home screen. 2. Tap the Change Language button. 3. Tap the left/right arrow button to select the desired language. 4. Tap to save the changes.

Games provides various games for you to play. Tap the Games button on the Home screen. The Games menu appears as shown below. � To start playing a game, simply tap the game button on the menu. To exit Games menu, tap .

10.1 About Mio Transfer Mio Transfer allows you to easily transfer data such as MP3, video and photos between your device and a computer, synchronize your contacts and recover the system and the application programs to its default states. It provides the following tools: � Movie Allows you to transfer the video files between your device and your computer. (See section 10.3 for details.)

computer to your device. (See section 10.4 for details.) � Recover Allows you to recover the system and the application programs to its default states. � Mio online Provides link to the Mio website. � About Provides program information. � MP3 Allows you to transfer the MP3 files between your device and your computer. (See section 10.3 for details.) � Photo Allows you to transfer pictures between your device and your computer. (See section 10.3 for details.) 10.2 Installing Mio Transfer 1. Turn on your computer and insert the Application DVD into the CD-ROM drive of your computer. 2. When the language selecting screen appears, click the language that you wish to install from.

4. Click Next. Follow the onscreen instructions to complete the installation. NOTE: If Mio Transfer has already been installed on your computer, clicking Installl Mio Transfer will remove the application from your system.

Before playing MP3 music, video, or viewing pictures, you need to have the MP3, video or picture files ready on your device. Use Mio Transfer to copy the files from your computer to the correct location on your device. 1. If you want to copy the files to a storage card, insert the card to your device. 2. Turn on your computer and your device. 3. Connect the mini-USB end of the USB cable to the bottom of your device and the other end to a USB port on your computer. 4. Start Mio Transfer by clicking Mio Transfer icon on the Windows Desktop. The Mio Transfer screen appears. 5. You can copy MP3, video or picture files by clicking the following button: � To copy the MP3 files, click MP3 on the top menu bar. � To copy the video files, click Movie on the top menu bar. � To copy the photos or pictures, click Photo on the top menu bar. The left column shows the drives of your computer and the right column shows the files in the appropriate folder of the target device (either or ).

� - the flash memory of your device � - a storage card inserted into your device. 6. Select the folder where your files are stored from the left column. Select the file you want to copy and tap button. The status bar will indicate the progress of file transfer and the selected file will be copied to the target device. NOTE: You can also copy the files from your device to your computer. First select the file you want to copy from the right column and select a folder on the left column to place these files. Then click to start the file transfer. Target Device

Various buttons are available for you to manage the files: � Rename Changes the name of the selected file. � Delete Removes the selected file. CAUTION: Be discrete when you delete files. Deleting files of which the function is unknown can cause programs or features to malfunction. � Cancel Aborts the ongoing action of file transfer. � New Folder Creates a new folder in the selected drive or folder. 10.4 Copying Contacts Information to Your Device You can use Mio Transfer to copy the Microsoft Outlook Contacts information from your computer to your device. This saves you the time for entering the information all over again on your device or on your computer. (For information on Contacts, see Chapter 4.) 1. Turn on your computer and your device. 2. Connect the mini-USB end of the USB cable to the bottom of your device and the other end to a USB port on your computer. 3. Start Mio Transfer by clicking the Mio Transfer icon on the Windows Desktop. The Mio Transfer screen appears. 4. Click Contacts on the top menu bar. 5. Select your option and click Start.

Recover allows you to recover the application programs (i.e. Photo Viewer, Contacts, etc.) if any on your device is lost or damaged. 1. Turn on your computer and your device. 2. Connect the mini-USB end of the USB cable to the bottom of your device and the other end to a USB port on your computer. 3. Start Mio Transfer by clicking the Mio Transfer icon on the Windows Desktop. The Mio Transfer screen appears. 4. Click Recover on the top menu bar. 5. Click Start to start the recovering process. The status bar will show the progress of the recovery.

12.1 for more information.)

11.1 About Video ToolBox Video ToolBox allows you to import media in a variety of sources and save it in a specific file format so you can watch the video on your device. You can also use the editing tools such as trimming the clip and adding special effects to create a customized project. 11.2 Installing Video ToolBox 1. Turn on your computer and insert the Application DVD into the DVD-ROM drive of your computer. 2. When the Language Selecting screen appears, click the language that you wish to install from.

Ref Name Description � File menu Select to open a menu where you can save your project file and set project preferences. � Options Panel Displays controls, buttons, and other information that you can use to customize the project. The contents of this panel change depending on the step you are in and the selected project element. � Step buttons Click to go to the next or previous step. � Media Clip List Displays the clips, transition effects and text that are used in the project. Click to remove the clip from the Media Clip List or click to view the selected clip’s properties. � Step Panel Displays buttons that correspond to the different video editing steps. � Preview Window Displays the video playback. � Navigation Panel Displays buttons for playback and trimming clips. � � � � � � �

Step 1: Determine Video Output Setting 1. On Windows desktop, click Start � Programs � Video ToolBox 2.0 Home Edition � Video ToolBox 2.0 Home Edition. 2. On the first screen, select Default (MP4) as the output format. 3. Click Enter. Step 2: Add/Edit Media Clip 4. Click one of the Add Media buttons depending on your media source. (For detailed information, see sections 11.5 to 11.7.) � To add a video file, click . � To add an image file, click . � To add video from a DVD-Video or DVD-VR discs, click . � To add video from a digital source (e.g. DV camcorder), click .

. 5. Click Next to continue. Step 3: Choose Style 6. If you want, you can choose a movie style from the available themes and edit movie style elements. If you do not want to apply a style for your project, select the default white theme. (See Section 11.8 for details.)

Step 4: Create Video File 8. Click Create to save your video file in the selected output video format. 9. In the dialog box, enter the filename and click Save.

Inserting Clips into Your Project Insert video, image and DVD/DVD-VR video into the project’s Media Clip List. To insert a clip, just click an Add Media button and in the dialog box that opens, locate the file and click Open/OK. NOTE: Video ToolBox can only import DVD videos from non-copy-protected DVD discs or folders. Capturing Digital Video Video ToolBox lets you capture video from DV devices such as DV camcorders. Video ToolBox automatically saves the captured video in the DV AVI format. To capture digital video: 1. Click (Capture Digital Video). 2. Click (Toggle Display). 3. Specify a Capture folder in which to save video files. 4. Click Options to open a menu for customizing more capture settings. The available options in the menu depend on the selected capture plug-in. 5. Use the Navigation Panel to scan your video to search the part to capture. The device control must be properly set up to be able to control the DV camcorder. To set up the device control, click Options and select Select Device Control. In the dialog box, select the device control to use in Current device. 6. When you locate the start of the section that you want to capture, click Capture Video to start capturing. 7. Click Stop Capture or press the Esc key to stop capturing. 8. Click OK.

When footage is captured from analog sources such as VHS, Video¬8, or TV, it is converted to a digital format that can be read and stored by the computer. Video ToolBox automatically saves the captured video in the DV AVI format. To capture analog video: 1. Click (Capture Analog Video). 2. Click (Toggle Display). 3. Specify a Capture folder in which to save video files. 4. Click Capture Video to start capturing. Click Stop Capture or press the Esc key to stop capturing. 5. Click OK. Capturing Still Images In addition to capturing video, Video ToolBox also allows you to capture still images when the source is digital video or analog video. Images are saved in JPEG format and the size depends on the source video’s frame size. To capture still images, click Capture Image when you see the image you want to capture in the Preview Window.

When video clip(s) are added, the editing tools include: � Multi-trim Video Allows you to choose desired segments from a video file and extract them. � Split Video Cuts the selected clip into two. � Auto-enhance Select to automatically adjust the hue, saturation, brightness and the contrast of the clip. Media Clip List Editing tools

To split a video clip: 1. Select the clip you want to split on the Media Clip List. 2. Drag the Jog Bar to the point where you want to cut the clip. 3. Click Split Video to cut the clip into two clips. To remove one of these clips, select the unwanted clip and click . To trim a video clip with the Trim Bar: 1. Select the clip you want to split on the Media Clip List. 2. Click and drag the Trim handles on the Trim Bar to set the Mark-in/Mark-out points on the clip.

the clip then click (Mark-in/Mark-out). Trimming a Video into Multiple Clips 1. Click Multi-trim Video on the Options Panel. 2. In the Multi-trim Video dialog box, view the whole clip first by clicking to determine how you want to mark segments. If you want to mark segments to retain, click Selection Mode then select Retain selection. Otherwise, select Delete selection if you prefer to mark segments that you want taken out from the clip. 3. Drag the Jog Bar until you locate the point in the video that you want to use as the beginning frame of the first segment. Click (Start). Drag the Jog Bar again, this time, to the point where you want the segment to end. Click (End). 4. Repeat step 3 as required until you have marked all the segments you want kept or removed.

onto the Media Clip List. Multi-Trim Video Control Control Button Description / Reverses or advances through the video in fixed increments. By default, these buttons move up or down through the video in increments of 25 seconds. To change this, tap the up or down arrow to adjust the value. Click and hold to open the speed bar. Select a speed and hold it there to quickly reverse or advance through the video. Plays the trimmed segments. Plays the whole video. / Moves to the start or end frame of a trimmed segment. / Moves to the previous/next frame in the video.

You can create a video slideshow using your images. To create, click (Insert Image) and, in the dialog box, select the images (press Ctrl or Shift to select multiple files) you want to include in the slideshow and click Open. The duration of each image can be set in the Preferences dialog box. Use the rotate buttons to change the orientation of the selected image. Rearrange the clips in the Media Clip List by dragging and dropping the clip to the desired position. Media Clip List Editing tools

A style refers to a set if attributes including beginning/ending clips, transition effects, and background music. Selecting a Movie Style In the Options Panel, click the style you want to use. A beginning clip and an ending clip in the selected style will be added to your project. Select background music. Style elements are added to the Media Clip List. Select a style.