Exmark LAZER Z Operator's Manual

File Specifications

Brand: Exmark
Category: Lawn Mower
Model: LAZER Z (Operator's Manual), prIJ.99.Ou9UU
File Info: Adobe Acrobat PDF (DjVu)
File Size: 3.49 Mb
Pages: 52 pages

Download PDF

Download Exmark LAZER Z Manual (52 pages)

Read Online:

Read the Exmark LAZER Z Operator's Manual online using the built-in PDF viewer. This document explains how to operate the device, adjust settings and perform regular maintenance.

Key Pages of Document

PART NO. 633792

LOCATION: LH Side of Console PART NO. 633798 LOCATION: RH Side of Console PART NO. 633354 LOCATION: Top of Console Left and Right Side PART NO. 513748 LOCATIONS: -Rubber Heat Shield Behind Seat -Bottom Side of Floorpan PART NO. 633345 LOCATION: RH Side of Cutting Height Adjustment Plate PART NO. 633706 LOCATION: LH Side of Cutting Height Adjustment Plate PART NO. 633770 LOCATION: LH & RH Sides of Radiator Mount For Exmark Mower Parts Call 606-678-9623 or 606-561-498 ...

Limited Warranty Exmark Commercial Turf Equipment Exmark Mfg. Co. Inc. ("Exmark") warrants on

the terms and conditions herein, that it will repair, replace or adjust any part manufactured by Exmark and found by Exmark(in the exercise of its reasonable discretion)to be defective in factory material or workmanship. This warranty is limited to one year from the date of original retail purchase (90 days for rental use) for any Exmark mower that is used for commercial or any other income producing purpose. The Blade Spindle assemblies will be warranted for three years, one year ...

Repeat on opposite side of unit.

5.2.14 Motion control linkage adjustment. CAUTION •••• Keep clear of wheels and other moving parts when making these adjustments. CAUTION •••• When it is necessary to raise the deck or mower for service or maintenance, DO NOT rely solely on mechanical or hydraulic jacks for support. Use adequate jack stands or equivalent support. a) This adjustment must be made with the drive wheels turning. First raise the frame and block up so that drive wheels can rotate freely. b) Remove the electrical connection from the seat safety switch, loc ...

8. HYDRAULIC DIAGRAM

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983 www.mymowerparts.com ...

2.1 MODEL NUMBER:

2.2 ENGINE: 2.2.1 Engine Specifications: See your Engine Owner’s Manual 2.2.2 Full Speed: 3600 RPM (No Load) Idle: 1500 RPM (All Units except Kohler 26 HP EFI) Full Speed: 3750 RPM (No Load) Idle: 1500 RPM (26 HP EFI Kohler Only) 2.3 FUEL SYSTEM 2.3.1 Capacity: 9.0 gal. (34 L.) for Serial Nos. 160,000-189,999 11.0 gal. (42 L.) for Serial Nos. 190,000 & Higher 2.3.2 Type of Fuel: Regular unleaded gasoline, 87 octane or higher 2.3.3 Fuel Filter: Kohler Air-cooled units: In-line 15 Micron Kohler P/N 2405002. Kohler 26 HP EFI units: In-line ...

Description of Work Done

Service Done By For Exmark Mower Parts Call 606-678-9623 or 606-561-4983 www.mymowerparts.com ...

Fuel is Highly Flammable. DO NOT smoke while

refueling. Refuel only in a well ventilated area, or refuel outdoors. •••• Store fuel in containers specifically designed for this purpose. •••• Add fuel before starting the engine. Never remove the cap of the fuel tank or add fuel when engine is running or when the engine is hot. •••• Never fill the fuel tank so that the fuel level rises above a level that is 1/2” below the bottom of the filler neck to allow for fuel expansion and prevent fuel spillage. •••• If fuel is spilled, DO NOT a ...

7. ELECTRICAL DIAGRAM – KOHLER 18, 22, 23, & 25 HP AIR-COOLED UNITS

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983 www.mymowerparts.com ...

Exmark LAZER Z user guide recommended for: Navigator CD42CD, FR524, M217B, METRO 408, LZS850EKA724W0.

⚠️ Download Safety

The Lawn Mower Operator's manual (52 pages) is completely safe to download (last scan date: 10/04/2026).

Related PDF Instructions for Exmark LAZER Z:

Lawn Mower Equipment: Frequently Requested

Have some Questions about Exmark LAZER Z Device?

Get valuable and actionable advices from other Exmark LAZER Z device users. Describe your problem or question, regarding the using of LAZER Z, in as much detail as possible, and other users will be able to answer you.