Moffat MGH620B Instruction Booklet

Keep this instruction book for future reference and ensure it is passed on to any new owner. 1. Hob Top 2. Rapid Burner 3. Semi-rapid Burners 4. Auxiliary Burner 5. Control knobs 6. Electric Ignition Push Button 1 3 2 4 3 6 5 These instructions are only valid for : GB

text to guide you throughout the Instructions: Safety Instructions Step by step instructions for an operation Hints and Tips Environmental information � You MUST read these warnings carefully before installing or using the oven. If you need assistance, contact our Customer Care Department on 08705 950950 Guide to Use the instructions Important Safety Information Installation � This hob must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards. � Any gas installation must be carried out by a registered CORGI installer. � Remove all packaging before using the hob. � Ensure that the gas and electrical supply complies with the type stated on the rating plate, located near the gas supply pipe. � Do not attempt to modify the hob in any way. Child Safety � This hob is designed to be operated by adults. Do not allow children to play near or with the hob. � The hob gets hot when it is in use. � Children should be kept away until it has cooled. � Children can also injure themselves by pulling pans or pots off the hob. During Use � This hob is intended for domestic cooking only. It is not designed for commercial or industrial purposes. � When in use a gas cooking appliance will produce heat and moisture in the room in which it has been installed. Ensure there is a continuous air supply, keeping air vents in good condition or installing a cooker hood with a venting hose. � When using the hob for a long period of time, the ventilation should be improved, by opening a window or increasing the extractor speed. � Do not use this hob if it is in contact with water. Do not operate the hob with wet hands. � Ensure the control knobs are in the ‘OFF’ position when not in use. � When using other electrical appliances, ensure the cable does not come into contact with the hot surfaces of the cooking appliance. � Unstable or misshapen pans should not be used on the hob as unstable pans can cause an accident by tipping or spillage. � Never leave the hob unattended when cooking with oil and fats. � Never use plastic or aluminium foil dishes on the hob. � Perishable food, plastic items and areosols may be affected by heat and should not be stored above or below the hob unit. Service � This hob should only be repaired or serviced by an authorised Service Engineer and only genuine approved spare parts should be used. Environmental Information � After installation, please dispose of the packaging with due regard to safety and the environment. � When disposing of an old appliance, make it unusable, by cutting off the cable.

� push the electric ignition push button which is marked by a little spark ( ); � at the same time turn the relevant control knob anticlockwise to maximum position; � then adjust the flame as required. If the burner does not ignite, turn the control knob to zero, and try again. To ensure maximum burner efficiency, you should only use pots and pans with a flat bottom fitting the size of the burner used (see table). Burner minimum maximum diameter diameter Rapid 180 mm. 260 mm. Semi-rapid 120 mm. 220 mm. Auxiliary 80 mm. 160 mm. � As soon as a liquid starts boiling, turn down the flame so that it will barely keep the liquid simmering. If the control knobs become difficult to turn, please contact your local Service Force Centre. If you use a saucepan which is smaller than the recommended size, the flame will spread beyond the bottom of the vessel, causing the handle to overheat. Take care when frying food in hot oil or fat, as the overheated splashes could easily ignite. Maintenance and Cleaning Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob from the electricity supply. The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool. The Hob Top Regularly wipe over the hob top using a soft cloth well wrung out in warm water to which a little washing up liquid has been added. Avoid the use of the following: - household detergent and bleaches; - impregnated pads unsuitable for non-stick saucepans; - steel wool pads; - bath/sink stain removers. Should the hob top become heavily soiled, it is recommended that a cleaning product such as Hob Brite or Bar Keepers Friend is used. Pan Supports The pan supports are dishwasher proof. If washing them by hand, take care when drying them as the enamelling process occasionally leaves rough edges. If necessay, remove stubborn stains using a paste cleaner. Ignition candle The electric ignition is obtained through a ceramic "candle" and a metal electrode (fig. 1, letter C). Keep these components well clean, to avoid difficult lighting, and check that the burner crown holes are not obstructed. The Burners The burner caps and crowns can be removed for cleaning. Wash the burner caps and crowns using hot soapy water, and remove marks with a mild paste cleaner. A well moistened soap impregnated steel wool pad can be used with caution, if the marks are particularly difficult to remove. After cleaning, be sure to wipe dry with a soft cloth.

� The gas ring burns unevenly SOLUTION � Check that the unit is plugged in and the electrical supply is switched on � Check that the RCCB has not tripped (if fitted) � Check the mains fuse has not blown � Check the burner cap and crown have been placed correctly, e.g. after cleaning. � Check the main jet is not blocked and the burner crown is clear of food particles. � Check the burner cap and crown have been placed correctly, e.g. after cleaning. Something not working If the appliance is not working correctly, please carry out the following checks, before contacting your local Service Force Centre. IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. Service and Spare Parts If you require spare parts or an engineer contact your local Service Force Centre by telephoning: 08705 929 929 Your call will be routed to the Service Centre covering your post code area. CUSTOMER CARE For general enquiries concerning your Moffat appliance and for further information on Moffat products, contact our Customer Care Department by letter or telephone as follows: Customer Care Department Moffat 55-77 High Street Slough Berkshire SL1 1DZ Tel : 08705 950950 * calls to this number may be recorded for training purposes We, Moffat, undertake that if, within 12 months of the date of the purchase, this Moffat appliance or any part thereof is proved to be defective by any reason only of faulty workmanship or materials, we will, at our option, repair or replace the same FREE OF ANY CHARGE for labour, materials or carriage on condition that: * The appliance has been correctly installed and used only on the gas and electricity supply stated on the rating plate. * The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer's instructions. * The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any person not authorised by us. * All service work under this guarantee must be undertaken by a Moffat Service Force Centre. * Any appliance or defective part replaced shall become the Company's property. * This guarantee is in addition to your statutory and other legal rights. Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours, in which case a premium will be charged. Guarantee Conditions

* Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic. * Costs incurred for calls to put right an appliance which is improperly installed or calls to appliance outside the United Kingdom. * Appliances found to be in use within a commercial or similar environment, plus those which are the subject to rental agreements. * Products of Moffat manufacture which are not marketed by Moffat. European Guarantee If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications: * The guarantee starts from the date you first purchased your product. * The guarantee is for the same period and to the same extent for labour and parts as exist in the new contry of use for this brand or range of products. * This guarantee relates to you and cannot be transferred to another user. * Your new home is within the European Community (EC) or European Free Trade Area. * The product is installed and used in accordance with our instructions and is only used domestically, i.e. a normal household The electrical supply complies with the specification given in the rating label. * The product is installed taking into account regulations in your new country. Before you move, please contact your nearest Customer Care centre, listed below, to give them details of your new home. They will then ensure that the local Service Organisation is aware of your move and able to look after you and your appliances. France Senlis +33 (0) 3 44 62 20 13 Germany Nürnberg +49 (0) 800 234 7378 Italy Pordenone+39 (0) 800117511 Sweden Stockholm +46 (0) 20 78 77 50 UK Slough +44 (0) 1753 219898 Overall dimensions Cut out dimensions Width: 580 mm. Width: 550 mm. Depth: 500 mm. Depth: 470 mm. Engineers technical data Instructions for the Installer Rear Left Burner (semi-rapid) Heat Input 2.0 kW (6824 BTU/HR) Front Left Burner (rapid) Heat Input 3.0 kW (10236 BTU/HR) 2.8 kW L.P.G. (9554 BTU/HR) Rear Right Burner (semi-rapid) Heat Input 2.0 kW (6824 BTU/HR) Front Right Burner (auxiliary) Heat Input 1.0 kW (3412 BTU/HR) Supply connections Gas: RC 1/2 inch (1/2 inch male) Rear right hand corner Electric: 230-240V 50Hz supply, 3 core flexible cable with non rewireable plug fitted with a 3 amp cartridge fuse. Burner Dia. Tap By-pass 1/100 mm Auxiliary 28 Semi-rapid 32 Rapid 40 Aeration adjustment none APPLIANCE CLASS: 3 APPLIANCE CATEGORY: II 2H3+ APPLIANCE GAS SUPPLY: Natural gas G20 / 20mbar I ll i This hob must be installed by qualified personnel to the relevant British Standards. Any gas installation must be carried out by a registered CORGI installer. The manufacturer will not accept liability, should the above instructions or any of the other safety instructions incorporated in this book be ignored.