Moog IPRS01 Installation And Operation Instructions Manual
Text of the manual
IP Reset Device
Installation and Operation Instructions for the following model:
IP Reset
IP Reset- provides a systematic solution for resetting IP cameras
or wireless systems, lock-ups caused by network issues, wiring
problems and power fluctuations by monitoring the output of an IP
camera’s digital signal.
Installation Steps
1.
Check th
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with damp cloth.
7 Do not block any of the ventilation openings. Install in accordance with the
manufacturers instructions.
8 Cable Runs
Limited Warranty for Moog Videolarm Products
Moog Videolarm warrants these products to be free from defects in material or workmanship as follows:
PRODUCT CATEGORY
PARTS \ LABOR
All Enclosures and Electronics*
Five (5) Years
Poles/PolEvators™/CamEvator
Three (3) Years
Warrior Series™/Q-View™/IR Illuminators
Five (5) Years
SView Series™
F
IPRS01 Power Requirements
Input Voltage: 5 to 24 Volts AC/DC
Operating Current: 12ma
Device Power Requirements
Maximum Operating Current: 2 Amps
Maximum Switching Current: 5 Amps
I/O Detect Input
Input Voltage: -25VDC to +25VDC
Input Drive Current: 3ma @ 12V Typ.
Threshold: +1.9 VDC
I/O Cable Length: 6" or 15.2cm
Timer Mode Reset Cycle
12 Hours
Power Reset P
The IP Reset operates in one of two modes, Intelligent Reset Mode and Timed Reset Mode. IP Reset automatically detects the operating mode by monitoring the I/O
Detect input. If IP Reset detects a change in the I/O Detect input, it will enter the Intelligent Reset mode. Otherwise, IP Reset will remain in Timed Reset mode. You
can choose to
