Moog RHW7CN-3 SERIES Installation And Operation Instructions Manual

Installation and Operation Instructions for the following models: Before attempting to connect or operate this product, please read these instructions completely. To be used with the 81-IN5409 Instruction Manual. CERTIFIED 81-IN5378 10-18-2010 RHW7CN-3 7” Vandal-Resistant Outdoor dome housing with wall mount, rugged cast aluminum top and polycarbonate clear dome, with 24VAC input, heater/blower, with a SView™ network pan/tilt. RHP7CN-3 7” Vandal-Resistant Outdoor dome housing with pendent style, rugged cast aluminum top and polycarbonate clear dome, with 24VAC input, heater/blower, with a SView™ network pan/tilt. RHW7CS-3 7” Vandal-Resistant Outdoor dome housing with wall mount, rugged cast aluminum top and polycarbonate clear dome, with 24VAC input, heater/blower, with a SView™ analog pan/tilt. RHP7CS-3 7” Vandal-Resistant Outdoor dome housing with pendent style, rugged cast aluminum top and polycarbonate clear dome, with 24VAC input, heater/blower, with a SView™ analog pan/tilt. © 2009-2010, Moog Videolarm, Inc. All Rights Reserved

VIDEOLARM INC.warrantsthis Product to be freefromdefectsin material or workmanship,as follows: PRODUCTCATEGORY PARTS LABOR All Enclosuresand Electronics Five (5) Years Five (5) Years Pan/Tilts Three (3) Years **6 months if usedin autoscan Three (3) Years **6 months if usedin autoscan Poles/PoleEvators Three (3) Years Three (3) Years Warrior/Q-View/I.R.Illuminators Five (5) Years Five (5) Years Controllers Five (5) Years Five (5) Years PowerSupplies Five (5) Years Five (5) Years AccessoryBrackets Five (5) Years Five (5) Years During the labor warranty period, to repair the Product,Purchaserwill either return the defective product,freight prepaid,or deliver it to Videolarm Inc. DecaturGA.The Productto be repaired is to be returned in either its original carton or a similar package an equal degree of protection with a RMA# (Return Materials Authorization number) displayed on the outer box or packingslip. To obtain a RMA#you must contactour TechnicalSupport Teamat 800.554.1124,extension 101.Videolarm will return the repaired Productfreight prepaid to Purchaser.Videolarm is not obligated to provide Purchaserwith a substitute unit during the warranty period or at any time. After the applicable warranty period, Purchasermust pay all labor and/or partscharges. 1.NOTIFICATIONOFCLAIMS:WARRANTYSERVICE:If Purchaser believes that the Product is defective in material or workmanship, then written notice with an explanation of the claim shall be given promptly by Purchaser to Videolarm but all claims for warranty service must be made within the warranty period. If after investigation Videolarm determines that the reported problem was not covered by the warranty, Purchaser shall pay Videolarm for the cost of investigating the problem at its then prevailing per incident billable rate. No repair or replacement of any Product or part thereof shall extend the warranty period as to the entire Product. The warranty on the repaired part only shall be in for a period of ninety (90) days following the repair or replacement of that part or the remaining period of the Product parts warranty, whichever is greater. 2.EXCLUSIVE REMEDY: ACCEPTANCE:Purchaser’s exclusive remedy and Videolarm’s sole obligation is to supply (or pay for) all labor necessary to repair any Product found to be defective within the warranty period and to supply, at no extra charge, new or rebuilt replacements for defective parts. 3.EXCEPTIONS TO LIMITED WARRANTY: Videolarm shall have no liability or obligation to Purchaser with respect to any Product requiring service during the warranty period which is subjected to any of the following: abuse, improper use: negligence, accident, lightning damage or other acts of God (i.e., hurricanes, earthquakes), failure of the end-user to follow the directions outlined in the product instructions, failure of the end-user to follow the maintenance procedures recommended by the International Security Industry Organization, written in product instructions, or recommended in the service manual for the Product. Furthermore, Videolarm shall have no liability where a schedule is for regular replacement or maintenance or cleaning of certain parts (based on usage) and the end-user has failed to follow such schedule; attempted repair by personnel; operation of the Product outside of the published environmental and electrical parameters, or if such Product’s original (trademark, serial number) markings have been defaced, altered, or removed. Videolarm excludes from warranty coverage Products sold AS IS and/or WITH ALL FAULTS and excludes used Products which have not been sold by Videolarm to the Purchaser. All software and accompanying documentation furnished with, or as part of the Product is furnished“AS IS”(i.e., without any warranty of any kind), except where expressly provided otherwise in any documentation or license agreement furnished with the Product. 4.PROOF OF PURCHASE:The Purchaser’s dated bill of sale must be retained as evidence of the date of purchase and to establish warranty eligibility. DISCLAIMEROF WARRANTY EXCEPT FOR THE FOREGOING WARRANTIES, VIDEOLARM HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY AND/OR ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY WARRANTY WITH REGARD TO ANY CLAIM OF INFRINGEMENT THAT MAY BE PROVIDED IN SECTION 2-312(3) OF THE UNIFORM COMMERCIAL CODE AND/OR IN ANY OTHER COMPARABLE STATE STATUTE. VIDEOLARM HEREBY DISCLAIMS ANY REPRESENTATIONS OR WARRANTY THAT THE PRODUCT IS COMPATIBLE WITH ANY COMBINATION OF NON-VIDEOLARM PRODUCTS OR NON-VIDEOLARM RECOMMENDED PRODUCTS PURCHASER CHOOSES TO CONNECT TO PRODUCT. LIMITATION OFLIABILITY THE LIABILITY OF VIDEOLARM, IF ANY, AND PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR DAMAGES FOR ANY CLAIM OF ANY KIND WHATSOEVER, REGARDLESS OF THE LEGAL THEORY AND WHETHER ARISING IN TORT OR CONTRACT, SHALL NOT BE GREATER THAN THE ACTUAL PURCHASE PRICE OF THE PRODUCT WITH RESPECT TO WHICH SUCH CLAIM IS MADE. IN NO EVENT SHALL VIDEOLARM BE LIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION, REIMBURSEMENT OR DAMAGES ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS OR FOR ANY OTHER REASON WHATSOEVER. /tour operation /tour operation **6 months if usedin autoscan /tour operation **6 months if usedin autoscan /tour operation SView Series Five (5) Years Five (5) Years The limited warranty stated in these product instructions is subject to all of the following terms and conditions: TERMS AND CONDITIONS

* Pendent Model (ONLY) * NOT included with E or 12V models RHW7CN-3 RHW7CS-3 RHP7CN-3 RHP7CS-3 24 VAC 80 Watts Accessories: Heater: 50 Watts, Blower: 2 Watt Camera Power: (See Camera Specifications): 28 Watts Max Tools Required: .100” Flat Head Screwdriver Phillips Head Screwdriver 24 VAC 80 Vatios De Accesorios: Calentador: 50 Watts, Blower: 2 Vatio Energía De la Cámara fotográfica De : (Véase Las Especificaciones De la Cámara fotográfica): 28 Vatios De Herramientas Máximas Requeridas: Destornillador Principal Phillips Del Destornillador Principal Plano Del 100" 24 VCA 80 Watts D'Accessoires : Réchauffeur : 50 Watts, Ventilateur : 2 watts. Puissance D'Appareil-photo : (Voir Les Caractéristiques D'Appareil-photo) : 28 Watts De Maximum Les Outils Ont exigé : Tournevis Principal Phillips De Tournevis Principal Plat De 100". 24 VAC 80 Watt Zusatzgerät-: Heizung: 50 Watts, Blower: 2 Watt-Kamera-Energie: (Sehen Sie Kamera-Spezifikationen): 28 Watt Maximale Werkzeug-Erfordert: 100"Flacher Hauptschraubenzieher-Kreuzkopfhauptschraubenzieher 24 VAC 80 Watts De Acessórios: Calefator: 50 Watts, Blower: 2 Watt Poder Da Câmera De : (Veja Especificações Da Câmera): 28 Watts De Ferramentas Máximas Requereram: Chave de fenda Principal Phillips Da Chave de fenda Principal Lisa Do 100" 24 VCA 80 Watt Di Accessori: Riscaldatore: 50 Watts, Blower: 2 Watt Alimentazione Della Macchina fotografica Da : (Veda Le Specifiche Della Macchina fotografica): 28 Watt Di Attrezzi Massimi Hanno richiesto: Cacciavite Capo "phillips" Del Cacciavite Capo Piano Del 100" Electrical Specifications Power 24VAC Class 2 Only !! Français Deutsch Italiano Portuguese Español English *** Pan Tilt boxed separately along with its instructions.

conduit). Run wire into bracket secure to wall. • El soporte se diseña para la guarnición del conducto 45° (si usa el conducto). Funcione con el alambre en el soporte seguro para emparedar. • La parenthèse est conçue pour l'ajustage de précision du conduit 45° (si à l'aide du conduit). Courez le fil dans la parenthèse bloquée pour murer. • Haltewinkel ist für Befestigung des Rohres 45° bestimmt (wenn das Rohr verwendet wird). Lassen Sie Draht in den Haltewinkel laufen, der, um zu ummauern sicher ist. • O suporte é projetado para o encaixe da canalização 45° (se usando a canalização). Funcione o fio no suporte seguro para murar. • La staffa è progettata per il montaggio del condotto 45° (se per mezzo del condotto). Faccia funzionare il legare nella staffa sicura per murare. Trim incoming control & power wires to 4”- 5”, for either wall or pendent bracket • Con seguridad soporte del montaje a emparedar. Tire del cableado a través del soporte y del ojal de la posición según lo demostrado. • Solidement parenthèse de bâti à murer. Tirez le câblage par la parenthèse et le canon isolant de position comme montré. • Sicher Einfassung Haltewinkel wall. Ziehen Sie Verdrahtung durch Haltewinkel und Position Gummimuffe, wie gezeigt. • Firmemente suporte da montagem a wall. Puxe a fiação através do suporte e do ilhó da posição como mostrado. • Saldamente staffa del supporto da wall. Tiri i collegamenti tramite la staffa ed il gommino di protezione di posizione come indicato. 4”-5” Secure lanyard to lanyard clip • Con seguridad soporte del montaje a emparedar. Tire del cableado a través del soporte y del ojal de la posición según lo demostrado. • Solidement parenthèse de bâti à murer. Tirez le câblage par la parenthèse et le canon isolant de position comme montré. • Sicher Einfassung Haltewinkel wall. Ziehen Sie Verdrahtung durch Haltewinkel und Position Gummimuffe, wie gezeigt. • Firmemente suporte da montagem a wall. Puxe a fiação através do suporte e do ilhó da posição como mostrado. • Saldamente staffa del supporto da wall. Tiri i collegamenti tramite la staffa ed il gommino di protezione di posizione come indicato. Complete ALL wiring connections • Con seguridad soporte del montaje a emparedar. Tire del cableado a través del soporte y del ojal de la posición según lo demostrado. • Solidement parenthèse de bâti à murer. Tirez le câblage par la parenthèse et le canon isolant de position comme montré. • Sicher Einfassung Haltewinkel wall. Ziehen Sie Verdrahtung durch Haltewinkel und Position Gummimuffe, wie gezeigt. • Firmemente suporte da montagem a wall. Puxe a fiação através do suporte e do ilhó da posição como mostrado. • Saldamente staffa del supporto da wall. Tiri i collegamenti tramite la staffa ed il gommino di protezione di posizione come indicato. WALL MOUNTING 1 2 3 4