Samsung WEP460 Quick Start Manual

TX 75082 Internet Address: http://www.samsungmobileusa.com/ accessories Customer Care Center:  1-888-987-4357 ▪ ▪ ▪ Guide No.: GH68-xxxxxA 08/2008. Rev. 1.0 Your headset overview Checking the accessories Make sure you have the following items with your headset: Charger, User's Guide Charging the headset Put the charger into the charger jack and into a power outlet. Charge the headset until the red indicator light turns blue. Do not attempt to charge the headset with anything other than the charger provided. Turning the headset on or off To turn the headset on, press and hold the Multi- function button until the indicator light flashes blue 4 times. To turn the headset off, press and hold the Multi-function button until the indicator light sequentially flashes blue and red. Wearing the headset Wear the headset on your ear. In general, you will get better performance when there are no obstructions (including parts of your body) between the headset and the phone. 460 Earpiece Volume down button Indicator light Charger jack Volume up button Ear hook Microphone Multi-function button

Standby mode: The headset is waiting for a call. The blue indicator light flashes every 6 seconds. Active mode: The headset has a call in progress. The blue indicator light flashes every 8 seconds. Pairing mode: The blue indicator light stays lit. You can discover and connect to your headset on your phone. Low battery mode: There is less than 10% of battery power left. The red indicator light flashes. You must recharge the battery. Pairing with your Bluetooth phone 1 Enter Pairing mode. If you turn the headset on for the first time, it proceeds into Pairing mode immediately. Make sure that the headset is off, and press and hold the Multi-function botton until the indicator light turns on blue and stays lit after blinking. • • • • • • 2 Search for and connect with your phone according to your phone user's guide. (Bluetooth PIN: 0000, 4 zeros). If the pairing is successful, the blue indicator light will flash 10 times rapidly before entering Standby mode. If the blue indicator light remains lit, retry pairing. NOTE: When the headset and the phone are paired, the headset attempts to reconnect automatically each time it turns on. Otherwise, press the Multi-function button to reconnect. Using call functions Some functions may not be supported by your phone. In Standby mode Press the Multi-function button to: Answer an incoming call Make a voice-activated call • • • • Press and hold the Multi-function button to: Redial the last number called Reject an incoming call In active mode Press the Multi-function button to: End a call Transfer a call from the phone to the headset Press and hold the Multi-function button to: Place a call on hold Answer a second call Retrieve a call on hold Press [+] or [-] to adjust the volume. Press and hold [+] or [-] to turn the microphone off or on. • • • • • • • Specifications Item Specifications and description Bluetooth version 2.0+EDR Support profile Headset Profile, Hands-Free Profile Operating range Up to 30 feet (10 meters) Standby time Up to 180 hours* Talk time Up to 8 hours* Charging time Approximately 2 hours* * Depending on the phone type and usage, the actual time may vary.