Motorola MT2070 Operation & User’s Manual

Motorola Solutions, Inc. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Motorola. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. Motorola grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Motorola. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Motorola. The user agrees to maintain Motorola’s copyright notice on the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof. Motorola reserves the right to make changes to any software or product to improve reliability, function, or design. Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any Motorola, Inc., intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Motorola products. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holding, LLC and are used under license. All other trademarks are the property of their respective owners. Motorola Solutions, Inc. One Motorola Plaza Holtsville, New York 11742-1300 http://www.motorolasolutions.com Warranty The MT2000 Series is warranted against defects in workmanship and materials for a period of 36 months from date of shipment, provided that the product remains unmodified and is operated under normal and proper conditions For the complete Motorola hardware product warranty statement, go to: http://www.motorolasolutions.com/warranty.

Change Date Description -01 Rev A 8/2009 Initial release. -02 Rev A 9/2009 Updates: Keypad; battery information; accessories. -03 Rev A 10/2011 Updates: USB cable usage with ActiveSync; USB French Belgian Windows bar code fix; device charging LED update; new screen shots Additions: Scan-to-IP; ESD dongle information; FIPS; Inverse 1D; Multi-tap Uppercase First Feature; Code Types: Aztec, Datamatrix, Maxicode, QR code, MicroPDF. Removed: Patent information. -04 Rev A 2/2013 Updates: - Static CDC is enabled by default. Additions: - USB Transmission Speed Parameters (Polling Interval, Fast HID Keyboard, Quick Keypad Emulation) - with note about re-enumerating the scanner. - GS1 Databar Limited Security level bar codes. - Enable/Disable USB HID over STB2000 contact. - DPM scanning - New DPM graphic to Scanning Orientation with Imager Aiming Pattern. -05 Rev A 2/2014 Updates: - French Belgian Windows bar code Additions: - Codabar Upper or Lower Case Start/Stop Characters Detection bar codes - ADF bar codes: ... Move Cursor Past Specific String ... Move Cursor To Specific String and Replace ... Move Cursor To Last Occurrence of String and Replace All ... Skip To End Australia Post Format bar code Composite Beep Mode bar code ISBT Concatenation Redundancy bar code USB Ignore Beep Directive bar code USB Ignore Type Directive bar code -06 Rev A 6/2014 Additions: Scan Angle Adaptive Scanning Interference Suppression Mode Interference Suppression Scan Angle Update: Device Configurations

Revision History............................................................................................................. v About This Guide Introduction.................................................................................................................... xix Documentation Set .................................................................................................. xix Device Configurations.............................................................................................. xx Cradle Configurations .............................................................................................. xx Chapter Descriptions ..................................................................................................... xxi Notational Conventions.................................................................................................. xxii Related Documents ....................................................................................................... xxiii Service Information........................................................................................................ xxiii Chapter 1: Getting Started Introduction ................................................................................................................... 1-1 Unpacking ..................................................................................................................... 1-1 MT20X0 .................................................................................................................. 1-1 Cradles .................................................................................................................... 1-1 STB2000-C10007R Single Slot Charge Only with ActiveSync ......................... 1-1 STB2000-F10007R Forklift Single Slot Charge Only ........................................ 1-2 STB2078-C10007WR Single Slot Multi-interface Bluetooth ............................. 1-2 STB2000-C40007R Four Slot Charge Only ...................................................... 1-2 STB2000-C40017R Four Slot Ethernet ............................................................ 1-2 SAC2000-4000CR Four Slot Spare Battery Charger ........................................ 1-2 Accessories .................................................................................................................. 1-2 Features ........................................................................................................................ 1-3 Cradle Features ............................................................................................................ 1-4 Single Slot - Front View and Connections .............................................................. 1-4 Single Slot - Back View ........................................................................................... 1-5 Single Slot - Mounting Cups ................................................................................... 1-6 Four Slot - Front View and Connections ................................................................. 1-7 Four Slot - Back View ............................................................................................. 1-8 Four Slot Spare Battery Charger ............................................................................ 1-9 Table of Contents

Host Interfaces .............................................................................................................. 1-10 Out-of-Box Startup ........................................................................................................ 1-10 Insert the Battery ..................................................................................................... 1-11 Connect the Cradle ................................................................................................. 1-11 Connecting the STB20XX Cradle ..................................................................... 1-11 Connecting STB2000-F Cradle ......................................................................... 1-12 Changing the Host Interface ............................................................................. 1-12 Supplying Power to the Cradle ............................................................................... 1-12 Using the USB Interface to Supply Power ........................................................ 1-12 Insert the Device in the Cradle ................................................................................ 1-13 Removing the Device from a Vertical Mount Cradle (Forklift or Wall Mount) .......... 1-13 Charge the Device Battery in the Cradle ................................................................ 1-13 Charging Indicator/LED ..................................................................................... 1-13 Configure the Device .............................................................................................. 1-13 Battery Charging ........................................................................................................... 1-14 Battery Safety ............................................................................................................... 1-15 Security Implementation/Protection From Counterfeit Batteries ............................. 1-15 Motorola Battery Safety Recommendations For Users ........................................... 1-15 Proper and Safe Battery Disposal & Recycling ....................................................... 1-15 Sending Data to the Host Computer ............................................................................. 1-16 Cable Mode ............................................................................................................. 1-16 Bluetooth Mode ....................................................................................................... 1-16 Pairing ............................................................................................................... 1-16 Lost Connection to Host .................................................................................... 1-16 Radio Communications ................................................................................................. 1-16 Startup .......................................................................................................................... 1-17 Suspending/Powering Off the Device ........................................................................... 1-17 Resetting the Device ..................................................................................................... 1-17 Turning the WLAN Radio On and Off ........................................................................... 1-17 Waking the Device ........................................................................................................ 1-17 Battery Removal ........................................................................................................... 1-18 Spare Battery Charging ................................................................................................ 1-18 Screen Protector ........................................................................................................... 1-18 Lanyard ......................................................................................................................... 1-19 Chapter 2: Operating the MT2070/MT2090 Introduction ................................................................................................................... 2-1 Keypad .......................................................................................................................... 2-2 Keypad Functionality ............................................................................................... 2-3 Keypad Multi-tap Configuration ......................................................................... 2-7 Using the Keypad to Navigate Applications .................................................................. 2-8 Entering Information ..................................................................................................... 2-8 Entering Information Using the Keypad .................................................................. 2-8 Screen Icons ................................................................................................................. 2-9 Home Screen ................................................................................................................ 2-11 Menu ....................................................................................................................... 2-12 User Settings .................................................................................................... 2-13 Device Status .................................................................................................... 2-15 Battery Status ................................................................................................... 2-15

ix About ................................................................................................................. 2-16 Suspend ............................................................................................................ 2-16 Scan Item ...................................................................................................................... 2-17 Quantity ................................................................................................................... 2-17 Item ......................................................................................................................... 2-17 Menu ....................................................................................................................... 2-18 Options .............................................................................................................. 2-18 About... .............................................................................................................. 2-19 Close ................................................................................................................. 2-19 Close ....................................................................................................................... 2-19 Scan Inventory .............................................................................................................. 2-20 Location .................................................................................................................. 2-20 Quantity ................................................................................................................... 2-21 Item ......................................................................................................................... 2-21 Menu ....................................................................................................................... 2-21 View Inventory .................................................................................................. 2-21 View Inventory Menu ...................................................................................... 2-22 Save Inventory ................................................................................................ 2-24 Options... ........................................................................................................ 2-25 About... ........................................................................................................... 2-25 Close .............................................................................................................. 2-25 Simple Inventory ........................................................................................................... 2-26 Item ......................................................................................................................... 2-26 Quantity ................................................................................................................... 2-26 Menu ....................................................................................................................... 2-27 Transmit ............................................................................................................ 2-27 View Inventory .................................................................................................. 2-27 View Inventory Menu ...................................................................................... 2-28 Save Inventory ................................................................................................ 2-30 Options... ........................................................................................................ 2-30 About... ........................................................................................................... 2-31 Close .............................................................................................................. 2-31 Scan-To-IP .................................................................................................................... 2-32 Suspend .................................................................................................................. 2-34 MCL .............................................................................................................................. 2-35 Scan Transmit ......................................................................................................... 2-36 Scan Inventory ........................................................................................................ 2-37 View Data .......................................................................................................... 2-38 Send Data ......................................................................................................... 2-38 Delete Last ........................................................................................................ 2-38 Image Viewer (Devices Equipped with Imagers) .......................................................... 2-39 Menu ....................................................................................................................... 2-39 Preview On ....................................................................................................... 2-39 Open ................................................................................................................. 2-39 Options .............................................................................................................. 2-40 About ................................................................................................................. 2-40 Close ................................................................................................................. 2-40 Config ........................................................................................................................... 2-41 Wireless Companion (MT2090 Only) ...................................................................... 2-41 Find WLANs ...................................................................................................... 2-42

Manage Profiles ................................................................................................ 2-42 Changing Profiles ........................................................................................... 2-43 Creating a New Profile ...................................................................................... 2-43 Profile ID ........................................................................................................... 2-44 Profile Name ..................................................................................................... 2-44 ESSID ............................................................................................................... 2-44 Operating Mode ................................................................................................ 2-44 Operating Mode .............................................................................................. 2-45 Channel ............................................................................................................. 2-46 Security Mode ................................................................................................... 2-47 Security Mode ................................................................................................... 2-48 Authentication Type .......................................................................................... 2-49 Tunneled Authentication ................................................................................... 2-49 User Certificate Selection ................................................................................. 2-51 User Certificate Installation ............................................................................. 2-52 Server Certificate Selection ............................................................................ 2-54 Server Certificate Installation .......................................................................... 2-54 User Name ..................................................................................................... 2-55 Password ........................................................................................................ 2-56 Advanced Identity ............................................................................................. 2-57 Credential Cache Options ................................................................................. 2-58 Encryption ......................................................................................................... 2-60 Hexadecimal Keys .......................................................................................... 2-62 Pass-phrase Dialog ........................................................................................ 2-63 IP Address Entry ..................................................................................................... 2-65 Transmit Power ................................................................................................. 2-67 Battery Usage ................................................................................................... 2-68 Deleting a Profile ............................................................................................ 2-69 Ordering Profiles ............................................................................................. 2-69 Exporting a Profile .......................................................................................... 2-69 Manage Certificates .......................................................................................... 2-69 Certificate Properties ...................................................................................... 2-71 Import a Certificate ......................................................................................... 2-71 Delete a Certificate ......................................................................................... 2-72 Manage PACs ................................................................................................... 2-73 PAC Properties ............................................................................................... 2-74 Delete PAC ..................................................................................................... 2-74 Import PAC ..................................................................................................... 2-74 Options .............................................................................................................. 2-76 Operating Mode Filtering ................................................................................ 2-76 Regulatory Options ......................................................................................... 2-77 Band Selection ............................................................................................... 2-77 System Options .............................................................................................. 2-78 Auto PAC Settings .......................................................................................... 2-78 Change Password .......................................................................................... 2-79 Export ............................................................................................................. 2-81 Wireless Status ................................................................................................. 2-82 Signal Strength ............................................................................................... 2-83 Current Profile ............................................................................................... 2-83 IPv4 Status ..................................................................................................... 2-85

xi Wireless Log ................................................................................................... 2-86 Versions .......................................................................................................... 2-87 Wireless Diagnostics ......................................................................................... 2-87 ICMP Ping ...................................................................................................... 2-88 Graphs ............................................................................................................ 2-89 Trace Route .................................................................................................... 2-89 Known APs ..................................................................................................... 2-90 Log On/Off ........................................................................................................ 2-91 User Already Logged In .................................................................................. 2-91 No User Logged In ......................................................................................... 2-91 Enable/Disable Radio ....................................................................................... 2-92 Settings ................................................................................................................... 2-93 General Parameters .......................................................................................... 2-93 Bar Code Settings ............................................................................................. 2-93 Rapid Deployment .................................................................................................. 2-94 MSP Agent .............................................................................................................. 2-94 BTExplorer .............................................................................................................. 2-95 Establish a New Connection ............................................................................. 2-95 Add a Bluetooth Service ................................................................................... 2-97 Turn Bluetooth On/Off ....................................................................................... 2-99 Miscellaneous Bluetooth Settings ..................................................................... 2-99 Device Info Tab .............................................................................................. 2-99 Services Tab ................................................................................................... 2-99 Security Tab ................................................................................................... 2-100 Discovery Tab ................................................................................................. 2-100 Virtual COM Port Tab ..................................................................................... 2-101 Profiles Tab .................................................................................................... 2-101 Configure USB ........................................................................................................ 2-102 Up ........................................................................................................................... 2-103 Menu ....................................................................................................................... 2-103 Utilities .......................................................................................................................... 2-104 File Explorer ............................................................................................................ 2-104 File Explorer Functionality ................................................................................. 2-104 File Explorer Keypad Usage ............................................................................. 2-105 Task Manager ......................................................................................................... 2-105 Resetting the MT20X0 .................................................................................................. 2-106 Performing a Warm Boot ........................................................................................ 2-106 Performing a Cold Boot ........................................................................................... 2-106 Waking the MT20X0 ..................................................................................................... 2-107 File System Directory Structure .................................................................................... 2-107 Chapter 3: Scanning Introduction ................................................................................................................... 3-1 Beeper Definitions ........................................................................................................ 3-1 LED Definitions ............................................................................................................. 3-3 Scanning in Hand-Held Mode ....................................................................................... 3-4 Scanning with the MT20X0 ..................................................................................... 3-4 Aiming ..................................................................................................................... 3-4 Imager Aiming ................................................................................................... 3-4

Laser Aiming ..................................................................................................... 3-6 Scanning in Presentation Mode .................................................................................... 3-7 Scanning Considerations ........................................................................................ 3-8 Decode Distances ......................................................................................................... 3-9 Chapter 4: Radio Communications Introduction ................................................................................................................... 4-1 Scanning Sequence Examples ............................................................................... 4-1 Errors While Scanning ............................................................................................ 4-1 Radio Communications Parameter Defaults ................................................................. 4-2 Wireless Beeper Definitions .......................................................................................... 4-3 Radio Communications Host Types ............................................................................. 4-4 Bluetooth Technology Profile Support .......................................................................... 4-6 Master/Slave Set Up ............................................................................................... 4-6 Master ............................................................................................................... 4-6 Slave ................................................................................................................. 4-6 Bluetooth Friendly Name ........................................................................................ 4-7 Discoverable Mode ................................................................................................. 4-7 HID Host Parameters .................................................................................................... 4-8 HID Country Keyboard Types (Country Codes) ...................................................... 4-8 HID Keyboard Keystroke Delay .............................................................................. 4-10 HID CAPS Lock Override ........................................................................................ 4-10 HID Ignore Unknown Characters ............................................................................ 4-11 Emulate Keypad ...................................................................................................... 4-11 HID Keyboard FN1 Substitution .............................................................................. 4-12 HID Function Key Mapping ..................................................................................... 4-12 Simulated Caps Lock .............................................................................................. 4-13 Convert Case .......................................................................................................... 4-13 Auto-reconnect Feature ................................................................................................ 4-14 Reconnect Attempt Beep Feedback ....................................................................... 4-14 Reconnect Attempt Interval ..................................................................................... 4-15 Auto-reconnect in Bluetooth Keyboard Emulation (HID Slave) Mode ..................... 4-17 Out of Range Indicator .................................................................................................. 4-18 MT20X0(s) To Cradle Support ...................................................................................... 4-19 Modes of Operation ................................................................................................ 4-19 Point-to-Point Communication .......................................................................... 4-19 Multipoint-to-Point Communication ................................................................... 4-19 Parameter Broadcast (Cradle Host Only) ............................................................... 4-19 Pairing ..................................................................................................................... 4-20 Pairing Modes ................................................................................................... 4-21 Lock Override .................................................................................................... 4-21 Pairing Methods ................................................................................................ 4-22 Unpairing ........................................................................................................... 4-22 Pairing Bar Code Format ........................................................................................ 4-23 Pairing Bar Code Example ................................................................................ 4-23 Connection Maintenance Interval ........................................................................... 4-23 Considerations .................................................................................................. 4-24 Bluetooth Security ......................................................................................................... 4-26 Authentication ......................................................................................................... 4-26

xiii PIN Code ................................................................................................................ 4-27 Variable PIN Code ............................................................................................ 4-27 Encryption ............................................................................................................... 4-28 Chapter 5: User Preferences & Miscellaneous Scanner Options Introduction ................................................................................................................... 5-1 Scanning Sequence Examples ..................................................................................... 5-2 Errors While Scanning .................................................................................................. 5-2 User Preferences/Miscellaneous Options Parameter Defaults ..................................... 5-2 User Preferences .......................................................................................................... 5-4 Set Default Parameter ............................................................................................ 5-4 Host Mode ............................................................................................................... 5-5 Decode Pager Motor Enable ................................................................................... 5-6 Parameter Bar Code Scanning ............................................................................... 5-7 Scan Angle .............................................................................................................. 5-8 Adaptive Scanning .................................................................................................. 5-9 Interference Suppression Mode .............................................................................. 5-10 Interference Suppression Scan Angle .................................................................... 5-11 Beep After Good Decode ........................................................................................ 5-12 Beeper Tone ........................................................................................................... 5-13 Beeper Volume ....................................................................................................... 5-14 Hand-Held Trigger Mode ........................................................................................ 5-15 Decode Session Timeout ........................................................................................ 5-15 Picklist Mode ........................................................................................................... 5-16 Timeout Between Decodes, Same Symbol ............................................................ 5-17 Hand-Held Decode Aiming Pattern ......................................................................... 5-17 Decoding Illumination (Hand-Held Mode only) ....................................................... 5-18 Batch Mode ............................................................................................................. 5-19 Modes of Operation .......................................................................................... 5-19 FIPS Mode .............................................................................................................. 5-21 DPM Scanning (MT2070-DP only) .......................................................................... 5-21 Miscellaneous Parameters ........................................................................................... 5-22 Transmit Code ID Character ................................................................................... 5-22 Prefix/Suffix Values ................................................................................................. 5-23 Scan Data Transmission Format ............................................................................ 5-24 FN1 Substitution Values ......................................................................................... 5-25 Scan Data Transmission Format (continued) ......................................................... 5-25 Transmit “No Read” Message ................................................................................. 5-26 Chapter 6: Imaging Preferences Introduction ................................................................................................................... 6-1 Scanning Sequence Examples ..................................................................................... 6-2 Errors While Scanning .................................................................................................. 6-2 Imaging Preferences Parameter Defaults ..................................................................... 6-2 Imaging Preferences ..................................................................................................... 6-4 Operational Modes .................................................................................................. 6-4 Decode Mode .................................................................................................... 6-4 Snapshot Mode ................................................................................................. 6-4

Image Capture Illumination ..................................................................................... 6-5 Snapshot Mode Timeout ......................................................................................... 6-6 Snapshot Aiming Pattern ........................................................................................ 6-6 Image Cropping ...................................................................................................... 6-7 Crop to Pixel Addresses ......................................................................................... 6-8 Image Brightness (Target White) ............................................................................ 6-9 JPEG Quality and Size Value ................................................................................. 6-9 Image File Format Selector ..................................................................................... 6-10 Signature Capture ................................................................................................... 6-11 Output File Format ............................................................................................ 6-11 Signature Capture File Format Selector ................................................................. 6-12 Signature Capture Width ......................................................................................... 6-13 Signature Capture Height ....................................................................................... 6-13 Signature Capture JPEG Quality ............................................................................ 6-13 Video View Finder ................................................................................................... 6-14 Chapter 7: Customizing the MT20X0 Introduction ................................................................................................................... 7-1 Customizing the Startup Program ................................................................................. 7-2 Customizing the Home Screen View ............................................................................ 7-3 Navigator.xml File Content ...................................................................................... 7-4 Customizing the Scan Item or Scan Inventory Program ............................................... 7-5 Disabling MT2000 Scanner Services ............................................................................ 7-6 Chapter 8: RS-232 Interface Introduction ................................................................................................................... 8-1 Connecting an RS-232 Interface .................................................................................. 8-2 RS-232 Parameter Defaults .......................................................................................... 8-3 RS-232 Host Parameters .............................................................................................. 8-4 RS-232 Host Types ................................................................................................. 8-6 Baud Rate ............................................................................................................... 8-7 Parity ....................................................................................................................... 8-9 Stop Bit Select ........................................................................................................ 8-10 Data Bits ................................................................................................................. 8-10 Check Receive Errors ............................................................................................. 8-11 Hardware Handshaking .......................................................................................... 8-11 Software Handshaking ............................................................................................ 8-13 Host Serial Response Time-out .............................................................................. 8-15 RTS Line State ........................................................................................................ 8-16 Beep on ....................................................................................................... 8-16 Intercharacter Delay ................................................................................................ 8-17 Nixdorf Beep/LED Options ...................................................................................... 8-18 Ignore Unknown Characters ................................................................................... 8-18 ASCII Character Set for RS-232 ................................................................................... 8-19

xv Chapter 9: USB Interface Introduction ................................................................................................................... 9-1 Connecting a USB Interface ......................................................................................... 9-2 USB Parameter Defaults .............................................................................................. 9-3 USB Host Parameters .................................................................................................. 9-5 USB Device Type .................................................................................................... 9-5 CDC COM Port Emulation ...................................................................................... 9-7 Symbol Native API (SNAPI) Status Handshaking ................................................... 9-7 USB Country Keyboard Types - Country Codes ..................................................... 9-8 USB Keystroke Delay ............................................................................................. 9-10 USB CAPS Lock Override ...................................................................................... 9-10 USB Ignore Unknown Characters ........................................................................... 9-11 USB Ignore Beep Directive ..................................................................................... 9-11 USB Ignore Type Directive ..................................................................................... 9-12 Emulate Keypad ...................................................................................................... 9-12 Emulate Keypad with Leading Zero ........................................................................ 9-13 USB Keyboard FN 1 Substitution ............................................................................ 9-13 Function Key Mapping ............................................................................................ 9-14 Simulated Caps Lock .............................................................................................. 9-14 Convert Case .......................................................................................................... 9-15 USB Transmission Speed Parameters ................................................................... 9-16 USB Polling Interval .......................................................................................... 9-16 Fast HID Keyboard ........................................................................................... 9-18 Quick Keypad Emulation ................................................................................... 9-18 USB HID Over the STB2000 Charge-only Cradle .................................................. 9-19 ASCII Character Set for USB ........................................................................................ 9-20 Chapter 10: IBM 468X / 469X Interface Introduction ................................................................................................................... 10-1 Connecting to an IBM 468X/469X Host ........................................................................ 10-2 IBM Parameter Defaults ............................................................................................... 10-3 IBM 468X/469X Host Parameters ................................................................................. 10-4 Port Address ........................................................................................................... 10-4 Convert Unknown to Code 39 ................................................................................. 10-5 Chapter 11: Keyboard Wedge Interface Introduction ................................................................................................................... 11-1 Connecting a Keyboard Wedge Interface ..................................................................... 11-2 Keyboard Wedge Parameter Defaults .......................................................................... 11-3 Keyboard Wedge Host Parameters .............................................................................. 11-4 Keyboard Wedge Host Types ................................................................................. 11-4 Keyboard Wedge Country Types - Country Codes ................................................. 11-5 Ignore Unknown Characters ................................................................................... 11-7 Keystroke Delay ...................................................................................................... 11-7 Intra-Keystroke Delay ............................................................................................. 11-8 Alternate Numeric Keypad Emulation ..................................................................... 11-8 Caps Lock On ......................................................................................................... 11-9 Caps Lock Override ................................................................................................ 11-9

Convert Wedge Data .............................................................................................. 11-10 Function Key Mapping ............................................................................................ 11-10 FN1 Substitution ..................................................................................................... 11-11 Send Make and Break ............................................................................................ 11-11 Keyboard Maps ....................................................................................................... 11-12 ASCII Character Set for Keyboard Wedge ................................................................... 11-13 Chapter 12: Symbologies Introduction ................................................................................................................... 12-1 Scanning Sequence Examples ..................................................................................... 12-1 Errors While Scanning .................................................................................................. 12-2 Symbology Parameter Defaults .................................................................................... 12-2 UPC/EAN ...................................................................................................................... 12-7 Enable/Disable UPC-A ............................................................................................ 12-7 Enable/Disable UPC-E ............................................................................................ 12-7 Enable/Disable UPC-E1 .......................................................................................... 12-8 Enable/Disable EAN-8/JAN-8 ................................................................................. 12-8 Enable/Disable EAN-13/JAN-13 ............................................................................. 12-9 Enable/Disable Bookland EAN ............................................................................... 12-9 Decode UPC/EAN/JAN Supplementals .................................................................. 12-10 User-Programmable Supplementals ....................................................................... 12-13 UPC/EAN/JAN Supplemental Redundancy ............................................................ 12-13 UPC/EAN/JAN Supplemental AIM ID Format ......................................................... 12-14 Transmit UPC-A Check Digit .................................................................................. 12-14 Transmit UPC-E Check Digit .................................................................................. 12-15 Transmit UPC-E1 Check Digit ................................................................................ 12-16 UPC-A Preamble .................................................................................................... 12-16 UPC-E Preamble .................................................................................................... 12-17 UPC-E1 Preamble .................................................................................................. 12-18 Convert UPC-E to UPC-A ....................................................................................... 12-19 Convert UPC-E1 to UPC-A ..................................................................................... 12-19 EAN-8/JAN-8 Extend .............................................................................................. 12-20 Bookland ISBN Format ........................................................................................... 12-21 UCC Coupon Extended Code ................................................................................. 12-22 Coupon Report ........................................................................................................ 12-22 ISSN EAN ............................................................................................................... 12-23 Code 128 ...................................................................................................................... 12-24 Enable/Disable Code 128 ....................................................................................... 12-24 Set Lengths for Code 128 ....................................................................................... 12-24 Enable/Disable GS1-128 (formerly UCC/EAN-128) ................................................ 12-26 Enable/Disable ISBT 128 ........................................................................................ 12-26 ISBT Concatenation ................................................................................................ 12-27 Check ISBT Table ................................................................................................... 12-28 ISBT Concatenation Redundancy ........................................................................... 12-28 Code 39 ........................................................................................................................ 12-29 Enable/Disable Code 39 ......................................................................................... 12-29 Enable/Disable Trioptic Code 39 ............................................................................ 12-29 Convert Code 39 to Code 32 .................................................................................. 12-30 Code 32 Prefix ........................................................................................................ 12-30

xvii Set Lengths for Code 39 ......................................................................................... 12-31 Code 39 Check Digit Verification ............................................................................ 12-32 Transmit Code 39 Check Digit ................................................................................ 12-32 Code 39 Full ASCII Conversion .............................................................................. 12-33 Code 93 ........................................................................................................................ 12-34 Enable/Disable Code 93 ......................................................................................... 12-34 Set Lengths for Code 93 ......................................................................................... 12-34 Code 11 ........................................................................................................................ 12-36 Code 11 .................................................................................................................. 12-36 Set Lengths for Code 11 ......................................................................................... 12-36 Code 11 Check Digit Verification ............................................................................ 12-38 Transmit Code 11 Check Digits .............................................................................. 12-39 Interleaved 2 of 5 (ITF) ................................................................................................. 12-39 Enable/Disable Interleaved 2 of 5 ........................................................................... 12-39 Set Lengths for Interleaved 2 of 5 ........................................................................... 12-40 I 2 of 5 Check Digit Verification ............................................................................... 12-42 Transmit I 2 of 5 Check Digit ................................................................................... 12-42 Convert I 2 of 5 to EAN-13 ...................................................................................... 12-43 Discrete 2 of 5 (DTF) .................................................................................................... 12-43 Enable/Disable Discrete 2 of 5 ................................................................................ 12-43 Set Lengths for Discrete 2 of 5 ............................................................................... 12-44 Codabar (NW - 7) ......................................................................................................... 12-46 Enable/Disable Codabar ......................................................................................... 12-46 Set Lengths for Codabar ......................................................................................... 12-46 CLSI Editing ............................................................................................................ 12-48 NOTIS Editing ......................................................................................................... 12-48 Codabar Upper or Lower Case Start/Stop Characters Detection ........................... 12-49 MSI ............................................................................................................................... 12-50 Enable/Disable MSI ................................................................................................ 12-50 Set Lengths for MSI ................................................................................................ 12-50 MSI Check Digits .................................................................................................... 12-52 Transmit MSI Check Digit(s) ................................................................................... 12-52 MSI Check Digit Algorithm ...................................................................................... 12-53 Chinese 2 of 5 ............................................................................................................... 12-53 Enable/Disable Chinese 2 of 5 ................................................................................ 12-53 Korean 3 of 5 ................................................................................................................ 12-54 Enable/Disable Korean 3 of 5 ................................................................................. 12-54 Inverse 1D .................................................................................................................... 12-55 Postal Codes ................................................................................................................ 12-56 US Postnet .............................................................................................................. 12-56 US Planet ................................................................................................................ 12-56 Transmit US Postal Check Digit .............................................................................. 12-57 UK Postal ................................................................................................................ 12-57 Transmit UK Postal Check Digit .............................................................................. 12-58 Japan Postal ........................................................................................................... 12-58 Australian Postal ..................................................................................................... 12-59 Australia Post Format ............................................................................................. 12-60 Netherlands KIX Code ........................................................................................... 12-61 USPS 4CB/One Code/Intelligent Mail ..................................................................... 12-61 UPU FICS Postal .................................................................................................... 12-62

GS1 DataBar ................................................................................................................ 12-63 GS1 DataBar-14 ..................................................................................................... 12-63 GS1 DataBar Limited .............................................................................................. 12-63 GS1 DataBar Expanded ......................................................................................... 12-64 Convert GS1 DataBar to UPC/EAN ........................................................................ 12-64 GS1 DataBar Limited Security Level ...................................................................... 12-65 Composite ..................................................................................................................... 12-66 Composite CC-C ..................................................................................................... 12-66 Composite CC-A/B .................................................................................................. 12-66 Composite TLC-39 .................................................................................................. 12-67 UPC Composite Mode ............................................................................................ 12-67 Composite Beep Mode ........................................................................................... 12-68 2D Symbologies ............................................................................................................ 12-68 Enable/Disable PDF417 .......................................................................................... 12-68 Enable/Disable MicroPDF417 ................................................................................. 12-69 Code 128 Emulation ............................................................................................... 12-70 Data Matrix .............................................................................................................. 12-71 Maxicode ................................................................................................................. 12-71 QR Code ................................................................................................................. 12-72 MicroQR .................................................................................................................. 12-72 Aztec ....................................................................................................................... 12-73 Redundancy Level ........................................................................................................ 12-74 Redundancy Level 1 ............................................................................................... 12-74 Redundancy Level 2 ............................................................................................... 12-74 Redundancy Level 3 ............................................................................................... 12-74 Redundancy Level 4 ............................................................................................... 12-75 Security Level ............................................................................................................... 12-76 Report Version .............................................................................................................. 12-77 Chapter 13: Accessories Introduction ................................................................................................................... 13-1 Maintenance ................................................................................................................. 13-2 Batteries ........................................................................................................................ 13-2 Mounting ....................................................................................................................... 13-2 Single Slot Cradles ....................................................................................................... 13-3 Cradle Features ...................................................................................................... 13-3 Battery Charging in the Cradle ................................................................................ 13-3 Changing the Host Interface ................................................................................... 13-3 Communication ....................................................................................................... 13-4 Sending Data to the Host Computer ................................................................. 13-4 LED Indicators ........................................................................................................ 13-5 Miscellaneous LED Indicator Information ......................................................... 13-5 Four Slot Cradles .......................................................................................................... 13-6 Cradle Features ...................................................................................................... 13-6 Inserting Devices and Batteries in the Cradle ......................................................... 13-6 Removing the Device from the Four Slot Cradle .................................................... 13-6 Sending Data to the Host Computer ....................................................................... 13-7 Charging ................................................................................................................. 13-7 LED Indicators ........................................................................................................ 13-7

xix Four Slot Battery Charger ............................................................................................. 13-8 Features .................................................................................................................. 13-8 Inserting Batteries ................................................................................................... 13-8 Charging Batteries .................................................................................................. 13-8 LED Indicators ........................................................................................................ 13-9 Troubleshooting ............................................................................................................ 13-10 Chapter 14: Advanced Data Formatting Introduction ................................................................................................................... 14-1 Rules: Criteria Linked to Actions ................................................................................... 14-1 Using ADF Bar Codes .................................................................................................. 14-2 ADF Bar Code Menu Example ..................................................................................... 14-2 Rule 1: The Code 128 Scanning Rule .................................................................... 14-3 Rule 2: The UPC Scanning Rule ............................................................................ 14-3 Alternate Rule Sets ................................................................................................. 14-3 Rules Hierarchy (in Bar Codes) .............................................................................. 14-4 Default Rules .......................................................................................................... 14-5 ADF Bar Codes ............................................................................................................. 14-5 Special Commands ....................................................................................................... 14-8 Pause Duration ....................................................................................................... 14-8 Begin New Rule ...................................................................................................... 14-8 Save Rule ............................................................................................................... 14-9 Erase ....................................................................................................................... 14-9 Quit Entering Rules ................................................................................................. 14-9 Disable Rule Set ..................................................................................................... 14-10 Criteria .......................................................................................................................... 14-11 Code Types ............................................................................................................. 14-11 Code Lengths .......................................................................................................... 14-18 Message Containing A Specific Data String ........................................................... 14-22 Specific String at Start ...................................................................................... 14-22 Specific String, Any Location ............................................................................ 14-23 Any Message OK .............................................................................................. 14-23 Numeric Keypad ............................................................................................... 14-24 Rule Belongs To Set ......................................................................................... 14-26 Actions .......................................................................................................................... 14-27 Send Data ............................................................................................................... 14-27 Setup Field(s) .......................................................................................................... 14-30 Move Cursor ..................................................................................................... 14-31 Send Pause ...................................................................................................... 14-32 Skip Ahead ........................................................................................................ 14-33 Skip Back ......................................................................................................... 14-34 Send Preset Value ............................................................................................ 14-36 Modify Data ............................................................................................................. 14-37 Remove All Spaces ........................................................................................... 14-37 Crunch All Spaces ............................................................................................ 14-37 Stop Space Removal ........................................................................................ 14-37 Remove Leading Zeros ..................................................................................... 14-37 Stop Zero Removal ........................................................................................... 14-37 Pad Data with Spaces ............................................................................................. 14-38

Pad Data with Zeros ............................................................................................... 14-42 Beeps ...................................................................................................................... 14-47 Send Keystroke (Control Characters and Keyboard Characters) ........................... 14-47 Control Characters ............................................................................................ 14-47 Keyboard Characters ........................................................................................ 14-52 Send ALT Characters ....................................................................................... 14-66 Send Keypad Characters .................................................................................. 14-71 Send Function Key ............................................................................................ 14-76 Send Right Control Key .......................................................................................... 14-83 Send Graphic User Interface (GUI) Characters ...................................................... 14-84 Turn On/Off Rule Sets ............................................................................................ 14-89 Alphanumeric Keyboard ............................................................................................... 14-91 Chapter 15: Maintenance and Troubleshooting Introduction ................................................................................................................... 15-1 Maintenance ................................................................................................................. 15-1 MT20X0 .................................................................................................................. 15-1 Battery ..................................................................................................................... 15-2 Cradles .................................................................................................................... 15-2 Troubleshooting ............................................................................................................ 15-3 MT20X0 .................................................................................................................. 15-3 Single Slot Charge Only Cradle .............................................................................. 15-7 Single Slot Charge Only Vehicle Mount .................................................................. 15-8 Single Slot Charge Multi-interface .......................................................................... 15-9 Four Slot Charge Only Ethernet .............................................................................. 15-11 Four Slot Charge Only Cradle ................................................................................. 15-12 Four Slot Spare Battery Charger ............................................................................ 15-13 Cables ..................................................................................................................... 15-14 MCL ........................................................................................................................ 15-15 Appendix A: Standard Default Parameters Appendix B: Programming Reference Symbol Code Identifiers ................................................................................................ B-1 AIM Code Identifiers ..................................................................................................... B-3 Appendix C: Sample Bar Codes UPC-A ........................................................................................................................... C-1 UPC-E ........................................................................................................................... C-1 UPC-E1 ......................................................................................................................... C-2 EAN-13 ......................................................................................................................... C-2 EAN-8 ........................................................................................................................... C-2 Code 39 ........................................................................................................................ C-2 Trioptic Code 39 ........................................................................................................... C-3 Code 93 ........................................................................................................................ C-3 Code 11 ........................................................................................................................ C-3

xxi Code 128 ...................................................................................................................... C-4 Codabar ........................................................................................................................ C-4 MSI ............................................................................................................................... C-4 Interleaved 2 of 5 .......................................................................................................... C-4 PDF417 ......................................................................................................................... C-5 Data Matrix ................................................................................................................... C-5 Maxicode ...................................................................................................................... C-5 QR Code ....................................................................................................................... C-6 US Postnet .................................................................................................................... C-6 UK Postal ...................................................................................................................... C-6 Appendix D: Numeric Bar Codes 0, 1, 2, 3 ........................................................................................................................ D-1 4, 5, 6, 7 ........................................................................................................................ D-2 8, 9 ................................................................................................................................ D-3 Cancel ........................................................................................................................... D-3 Appendix E: Alphanumeric Bar Codes Alphanumeric Keyboard ............................................................................................... E-1 Appendix F: Signature Capture Code Introduction ................................................................................................................... F-1 Code Structure .............................................................................................................. F-1 Signature Capture Area .......................................................................................... F-1 CapCode Pattern Structure ..................................................................................... F-2 Start / Stop Patterns ..................................................................................................... F-2 Dimensions ................................................................................................................... F-3 Data Format .................................................................................................................. F-3 Additional Capabilities .................................................................................................. F-4 Signature Boxes ........................................................................................................... F-4 Appendix G: Quick Startup Exercises Introduction ................................................................................................................... G-1 Establishing an ActiveSync Connection ....................................................................... G-2 Using the STB2000 Cradle and USB Cable ........................................................... G-2 Using Only a USB Cable ......................................................................................... G-2 Establishing a Bluetooth (BT) Connection Using Open Bluetooth ................................ G-3 Establishing a Bluetooth (BT) Connection Using the STB2070 Cradle ........................ G-4 Using the Scan Item Application with the STB2078 Cradle .................................... G-4 Using the Scan Inventory Application with the STB2078 Cradle ............................ G-4 Customizing the Home Screen Menu ........................................................................... G-5 Modifying the Startup Program ..................................................................................... G-5 Disabling Scanner Services .......................................................................................... G-5

Introduction This guide provides information about using the MT2070/MT2090 devices. Documentation Set The documentation set for the MT2070/MT2090 devices provides information for specific user needs, and includes:/ • MT2070/ MT2090 Quick Start Guide - describes how to get the device up and running (part number 72-117308-xx). • MT2070/ MT2090 User Guide - describes how to use the device (part number 72E-117859-xx). • MT2070/ MT2090 Integrator Guide - describes how to set up the device and accessories (72E-117858-xx). • Enterprise Mobility Developer Kit (EMDK) Help File - provides API information for writing applications. • MCL Technologies Start-up guide for the MT2000 - provides start up information for running MCL on an MT20X0 device. NOTE Screens and windows pictured in this guide are samples and can differ from actual screens.

Device Configurations Cradle Configurations Configuration Radios Display Memory Data Capture Operating System Keypad MT2090-ML4D62170WR 802.11/Bluetooth 320x240 Color 64 MB RAM 64 MB Flash 1D, Medium Range, WW Windows CE 5.0 21 key MT2090-SD4D62170WR 802.11/Bluetooth 320x240 Color 64 MB RAM 64 MB Flash 1D/2D, Standard Range Windows CE 5.0 21 key MT2090-HD4D62170WR 802.11/Bluetooth 320x240 Color 64 MB RAM 64 MB Flash 1D/2D, High Definition Windows CE 5.0 21 key MT2090-DP4D62170WR 802.11/Bluetooth 320x240 Color 64 MB RAM 64 MB Flash DPM Windows CE 5.0 21 key MT2070-ML4D62370WR Bluetooth 320x240 Color 64 MB RAM 64 MB Flash 1D, Medium Range, MCL Windows CE 5.0 21 key MT2070-SD4D62370WR Bluetooth 320x240 Color 64 MB RAM 64 MB Flash 1D/2D, Standard Range, MCL Windows CE 5.0 21 key MT2070-HD4D62370WR Bluetooth 320x240 Color 64 MB RAM 64 MB Flash 1D/2D, HD, MCL Windows CE 5.0 21 key MT2070-DP4D62370WR Bluetooth 320x240 Color 64 MB RAM 64 MB Flash DPM, MCL Windows CE 5.0 21 key Cradle Configuration Type Radio STB2000-C10007R Single Slot, Charge Only with ActiveSync N/A STB2000-F10007R Single Slot, Charge Only, Vehicle Mount N/A STB2078-C10007WR Single Slot, Charge, Multi-interface Bluetooth STB2000-C40007R Four Slot, Charge Only N/A STB2000-C40017R Four Slot, Charge, Ethernet N/A SAC2000-4000CR Charger Four Slot Spare Battery Charger N/A

xxi Chapter Descriptions Topics covered in this guide are as follows: • Chapter 1, Getting Started provides a product overview, unpacking instructions and start up information. • Chapter 2, Operating the MT2070/MT2090 describes the device’s screens, and how to use the device. • Chapter 3, Scanning describes parts of the device, beeper and LED definitions, and how to scan data. • Chapter 4, Radio Communications provides information about the modes of operation and features available for wireless communication between devices, cradles and hosts, and also includes the parameters necessary to configure the device. • Chapter 5, User Preferences & Miscellaneous Scanner Options describes each user preference feature and provides the programming bar codes for selecting these features for the device. It also includes commonly used bar codes to customize how data is transmitted to the host device. • Chapter 6, Imaging Preferences describes each imager preference feature and provides the programming bar codes for selecting these features for the device. • Chapter 7, Customizing the MT20X0 provides information about customizing the MT20X0 device for the end user. • Chapter 8, RS-232 Interface provides information for setting up the device for RS-232 operation. • Chapter 9, USB Interface provides information for setting up the device for USB operation. • Chapter 10, IBM 468X / 469X Interface provides information for setting up the device with IBM 468X/469X POS systems. • Chapter 11, Keyboard Wedge Interface provides information for setting up the device for keyboard wedge operation. • Chapter 12, Symbologies describes all symbology features and provides the programming bar codes for selecting these features. • Chapter 13, Accessories describes all accessories for the device. • Chapter 14, Advanced Data Formatting (ADF) describes how to customize scanned data before transmitting to the host. • Chapter 15, Maintenance and Troubleshooting provides information on how to care for the device and troubleshooting the device and its cradles. • Appendix A, Standard Default Parameters provides a table of all host devices and miscellaneous device defaults. • Appendix B, Programming Reference provides a table of AIM code identifiers, ASCII character conversions, and keyboard maps. • Appendix C, Sample Bar Codes includes sample bar codes. • Appendix D, Numeric Bar Codes includes the numeric bar codes to scan for parameters requiring specific numeric values. • Appendix E, Alphanumeric Bar Codes includes the alphanumeric bar codes to scan for parameters requiring alphanumeric values. • Appendix F, Signature Capture Code provides information about using the device to capture a signature. • Appendix G, Quick Startup Exercises provides exercises to familiarize the user with the device and accessories. Exercises include establishing connections (ActiveSync and Bluetooth), customizing the Home Screen menu, modifying the Startup program, remapping the keypad and disabling Scanner Services.

Notational Conventions The following conventions are used in this document: • Italics are used to highlight the following: • Chapters and sections in this and related documents • Bold text is used to highlight the following: • Key names on a keypad • Button names on a screen or window. • bullets (•) indicate: • Action items • Lists of alternatives • Lists of required steps that are not necessarily sequential • Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists. • Throughout the programming bar code menus, asterisks (*) are used to denote default parameter settings. *Baud Rate 9600 Feature/Option * Indicates Default NOTE This symbol indicates something of special interest or importance to the reader. Failure to read the note will not result in physical harm to the reader, equipment or data. CAUTION This symbol indicates that if this information is ignored, the possibility of data or material damage may occur. WARNING! This symbol indicates that if this information is ignored the possibility that serious personal injury may occur.

xxiii Related Documents The following documents provide more information about the MT2070/MT2090 devices. • MT2070/MT2090 Quick Start Guide (part number 72-117308-xx) - describes how to get the device up and running. • MT2070/MT2090 User Guide, part number 72E-117859-xx - describes how to use the device. • MT2070/MT2090 Integrator Guide, part number 72E-117858-xx- describes how to set up the device and accessories. • STB2000/SAC2000 Cradles Quick Reference Guide (part number 72-117312-xx) - describes how to install and operate the cradles. For the latest version of this guide and all guides, go to: www.motorolasolutions.com/support. Service Information If you have a problem using the equipment, contact your facility's technical or systems support. If there is a problem with the equipment, they will contact the Motorola Solutions Global Customer Support Center at: www.motorolasolutions.com/support. When contacting Motorola Solutions support, please have the following information available: • Serial number of the device • Device serial numbers are located on the label under the top of the device • Cradles serial numbers are located on the label on the bottom of the cradle • Model number or product name • Device model numbers are located on the label under the top of the device • Cradle model numbers are located on the label on the bottom of the cradle • Software type and version number • See Figure 2-10 on page 2-16. Motorola responds to calls by e-mail, telephone or fax within the time limits set forth in support agreements. If your problem cannot be solved by Motorola Solutions Support, you may need to return your equipment for servicing and will be given specific directions. Motorola is not responsible for any damages incurred during shipment if the approved shipping container is not used. Shipping the units improperly can possibly void the warranty. If you purchased your business product from a Motorola business partner, contact that business partner for support.

Introduction This chapter lists the features of the device(s); accessories for the MT2000 Series devices; explains how to install and charge the batteries; power the cradles; and, replace the lanyard (if purchased). Unpacking Carefully remove all protective material from around the equipment and inspect it for damage. If the equipment was damaged in transit, contact Motorola Solutions Support. See page xxiii for contact information. KEEP THE PACKING. It is the approved shipping container and should be used if the equipment ever needs to be returned for servicing. MT20X0 Verify that the equipment listed below is included in the box: • MT2070/MT2090 • Lithium-ion (Li-ion) battery • Quick Start Guide. Cradles STB2000-C10007R Single Slot Charge Only with ActiveSync Verify that the equipment listed below is included in the box: • Cradle with desk mount cup installed • Wall mount cup • Regulatory Guide.

MT2070/MT2090 User Guide STB2000-F10007R Forklift Single Slot Charge Only Verify that the equipment listed below is included in the box: • Cradle with forklift cup installed • Metal mounting bracket with isolators • Quick Reference Guide. STB2078-C10007WR Single Slot Multi-interface Bluetooth Verify that the equipment listed below is included in the box: • Cradle with desk mount cup installed • Wall mount cup • Quick Reference Guide. STB2000-C40007R Four Slot Charge Only Verify that the equipment listed below is included in the box: • Cradle with wall mount cups installed • Quick Reference Guide. STB2000-C40017R Four Slot Ethernet Verify that the equipment listed below is included in the box: • Cradle with wall mount cups installed • Quick Reference Guide. SAC2000-4000CR Four Slot Spare Battery Charger Verify that the equipment listed below is included in the box: • Charger • Quick Reference Guide. Accessories See Chapter 13, Accessories for a list all accessories available for the MT2070/MT2090 devices.

Features Figure 1-1 MT2070/MT2090 Scan LED (MT2090 only) Scan Window Battery Latch Battery Keypad Display Scan Trigger Lanyard Catch Charge/Communication Contacts Scan LED Beeper WARNING! Never connect an Ethernet or phone cable to the host interface port. * Accessory Port Cover * Note: The accessory port is not available for use at this time. The device is not water sealed if the accessory port cover is removed. Scan LED (MT2090 only) Hook Recesses for Wall Mount Cradle

MT2070/MT2090 User Guide Cradle Features Single Slot - Front View and Connections Figure 1-2 Single Slot Cradle - Connections/Pairing Bar Code Power Connector USB/Host Connector Pairing Bar Code (Bluetooth cradles only) Note: An additional Pairing Bar Code is affixed under the cup. NOTE The functionality of the USB connection to a host PC varies by cradle type. For the single slot charge only cradle, the USB connection can be used with a device in the cradle for ActiveSync only. The charge only cradle LED does not light when powered off USB only. LED Latch Charge/ Communication Contacts Horizontal Desk Mounting Cup

Single Slot - Back View Figure 1-3 Single Slot Cradle - Back 2Mounting Key-Hole 2Mounting Key-Hole Rubber Foot Rubber Foot Rubber Foot Power Cable Groove Cable Ferrite Hook Power Port Host Port USB/Host Cable Groove Wall Mount Conversion Dial WARNING! Never connect an Ethernet or phone cable to the host interface port. Cup Release Snaps 1Forklift Bracket Screw Hole 1Forklift Bracket Screw Hole 1Forklift Bracket Screw Hole 1 Used to fasten bracket to STB2000-F (forklift) cradle. 2 Used to mount STB20XX cradle. Wall Mount Setting Desk Mount Setting

MT2070/MT2090 User Guide Single Slot - Mounting Cups Figure 1-4 Single Slot Cradle - Mounting Cups Wall Mount Cup Desk Mount Cup Forklift Cup

Four Slot - Front View and Connections Figure 1-5 Four Slot Cradle - Front Device Well (four) Battery Well (four) Wall Mounting Latches (two in each well) Charging/ Communications Contacts Battery Charging LED (four) Interchangeable Desk/Wall Mount Cup (four) Battery Charging Contacts Ethernet Activity LEDs (Ethernet Cradle cradles only) Power LED

MT2070/MT2090 User Guide Four Slot - Back View Figure 1-6 Four Slot Cradle - Back Power Port Wall Mount Conversion Dial Secondary Ethernet port for daisy chain (Ethernet cradle only) Primary Ethernet Port (Ethernet cradle only) Cable Well (2) Wall Mount Cup Screws Mounting Hole Mounting Hole Mounting Hole Mounting Hole NOTE When daisy chaining Ethernet cradles: connect the first cradle in the daisy chain to the Ethernet hub via the primary Ethernet port; connect the first cradle’s secondary port to the primary port of second cradle in the chain; connect the second cradle’s secondary port to the primary port of third cradle in the chain; etc. Each cradle in the daisy chain requires its own power supply.

Four Slot Spare Battery Charger Figure 1-7 Four Slot Spare Battery Charger Battery Well (four) Battery Charging LED (four) Battery Charging Contacts Cradle Power LED Wall Mount Key-Hole (4) Rubber Feet (4) Power Port Power Cable Groove Cable Well

MT2070/MT2090 User Guide Host Interfaces This device supports the following host interfaces through communication with a single slot multi-interface cradle: • Standard RS-232 connection to a host. • Keyboard wedge connection to a host, where scanned data is interpreted as keystrokes. The following international keyboards are supported (for Windows™ environment): North American, German, French, French Belgian, French Canadian, Spanish, Italian, Swedish, UK English, Japanese, and Brazilian Portuguese (see Keyboard Wedge Country Types - Country Codes on page 11-5 for a full list). • IBM® 468X/469X hosts. • USB connection to a host. The device autodetects a USB host and defaults to the HID keyboard interface type. Select other USB interface types by scanning programming bar codes. The following international keyboards are supported (for Windows™ environment): North America, German, French, French Belgian, French Canadian, Spanish, Italian, Swedish, UK English, Japanese, and Brazilian Portuguese (see USB Country Keyboard Types - Country Codes on page 9-8 for a full list). This device supports the following host interfaces without communication with a cradle: • Standard RS-232 connection to a host. • USB connection to a host via Bluetooth technology. The device autodetects a USB host and defaults to the HID keyboard interface type. Select other USB interface types by scanning programming bar codes. The following international keyboards are supported (for Windows™ environment): North America, German, French, French Belgian, French Canadian, Spanish, Italian, Swedish, UK English, Japanese, and Brazilian Portuguese. Out-of-Box Startup To get the MT2070/MT2090 up and running: • Insert the rechargeable Li-ion battery • Connect power to the cradle. • Insert the device in the cradle. • Charge the device. • Configure the device. NOTE USB interface types can also be selected via the USB configuration menu on the device. To access the USB configuration menu from the device’s Home screen, select Config... > Configure USB. NOTE USB interface types can also be selected via the USB configuration menu on the device. To access the USB configuration menu from the device’s Home screen, select Config... > Configure USB.

Insert the Battery The battery resides in a chamber in the device handle. To insert the battery: 1. Insert the battery into the battery well, top first, ensuring that the battery connectors touch the device connectors inside the well. 2. Push down on the back of the battery until it snaps into place. Figure 1-8 Battery Insertion Connect the Cradle Connecting the STB20XX Cradle 1. Insert the host interface cable into the cradle's USB/host port. See Figure 1-2 on page 1-4 and Figure 1-5 on page 1-7. 2. Connect the other end of the host interface cable to the host. 3. If necessary, connect the power supply to the cradle's power port (if the interface requires, or to allow fast charging of the device). 4. Connect the appropriate cable to the power supply and an AC power source, if necessary. 5. If applicable, insert the power supply cable ferrite into the support features on the cradle bottom and run the host and power cables into their respective cable grooves. 6. For Bluetooth cradles only, pair the device to the cradle by scanning the pairing bar code on the cradle. NOTE If the battery is completely discharged, and the unit is powered from a USB or RS232 cable, it may take up to two hours for the unit to power up.There is no indication to the user of this condition and it may appear that the unit is not charging and/or not working correctly. However, if the unit is placed in an STB2000 cradle with the 12V power supply power up is immediate. CAUTION Avoid touching the contacts when positioning the battery. IMPORTANT Connect the interface cable and power supply (if necessary) in the following order to ensure proper operation of the device and cradle.

MT2070/MT2090 User Guide 7. If necessary, scan the appropriate host bar code (for non-autodetected interfaces). See the specific host chapter. Connecting STB2000-F Cradle 1. Insert the host interface cable into the cradle's USB/host port. See Figure 1-2 on page 1-4. 2. Connect the forklift power supply to the cradle's power port, if applicable. 3. Optionally: Insert the power supply cable ferrite into the support features on the cradle bottom and run the host and power cables into their respective cable grooves, or use cable ties to secure them to the mounting plate after attaching it to the cradle. For more information about mounting options and procedures, refer to the documentation included with the cradle. 4. If necessary, scan the appropriate host bar code (for non-autodetected interfaces). See the specific host chapter. Changing the Host Interface To connect to a different host, or to the same host using a different cable: 1. Disconnect the power supply from the cradle, if used. 2. Disconnect the interface cable from the host. 3. Connect the interface cable to the new host, or the new interface cable to the existing host. 4. Reconnect the power supply, if required. 5. If necessary, scan the appropriate host bar code (for non-autodetected interfaces). See the specific host chapter. Supplying Power to the Cradle The cradle receives power from one of two sources: • An external power supply. • When connected to the host through an interface cable that supplies power. The cradle detects whether the host or the external supply is supplying power. It always draws power from the external supply when available, regardless of the presence of power from a host. Using the USB Interface to Supply Power When the cradle is connected to the host via the USB interface, the USB port can power the cradle and an external power supply is not necessary. Note that powering from a USB host charges the device at a slower rate than charging from an external power supply. Additionally, depending on the level of activity, the device may not charge at all. NOTE Disconnect the power supply before changing host cables, or the device may not recognize the new host. Different cables are required for different hosts. The connectors illustrated in each host chapter are examples only. The connectors may be different from those illustrated, but the steps to connect the device remain the same CAUTION If the device does not recognize the host, disconnect the power supply, then reconnect after connecting the host cable.

Insert the Device in the Cradle To insert the device in the cradle: 1. Insert the device into the cradle top first. 2. Push the handle until it clicks into place, engaging the contacts in the cradle and device. Figure 1-9 Inserting the Device in the Single Slot Cradles Removing the Device from a Vertical Mount Cradle (Forklift or Wall Mount) To remove the scanner from a vertically mounted cradle, remove the bottom of the scanner first then gently pull the top of the scanner out of the cradle. Charge the Device Battery in the Cradle For best performance, fully charge the device battery before using the device for the first time. To charge the device battery, place the device in the cradle (see Insert the Device in the Cradle on page 1-13). The battery begins charging when the device LED indicator starts flashing green. (With the exception of several initial charge cycles, the default state of the LED is off when the battery is fully charged.) A complete charge of a fully discharged battery can take up to four hours using external power and up to 10 hours using the interface cable. Charge within the recommended temperature of 32° to 104° F (0° to 40° C) nominal, 41° to 95° F (5° to 35° C) ideal. For information on maximizing battery life, see Battery on page 15-2. Charging Indicator/LED The device has on screen charging indicators as well as an LED. The device’s flashing green LED indicates charging activity. If the device displays or indicating a charging problem, remove the device from the cradle and replace the battery. If one of these icons continues to display, contact Motorola Solutions Support. See Screen Icons on page 2-9 for descriptions of display icons. Configure the Device Use the bar codes in this manual to configure the device. See Chapter 5, User Preferences & Miscellaneous Scanner Options, Chapter 6, Imaging Preferences and each host chapter for information about programming the device using bar code menus. 1 2 1 2 1 2 NOTE When inserting the device in a wall mounted cradle, ensure the device’s hook recesses engage the hooks on the wall mount adapter (when applicable). NOTE The default state of the LED is off when the battery is fully charged with the exception of several initial charge cycles. The LED may continually blink until the battery goes through several discharge cycles to calibrate itself. ? ?

MT2070/MT2090 User Guide Battery Charging Charge the device using a cradle or host interface cable, or remove and charge the Li-ion battery using a spare battery charger. Before using the device for the first time, fully charge the Li-ion battery until the green LED on the device goes off (default). The battery fully charges in less than four hours, when the device is placed in a cradle with a 12V supply connected. This device does not have a backup battery. Any data in RAM is lost when the battery is removed. However, the real-time clock is maintained for a period of 20 minutes during a battery change. Use the following accessories to charge the Li-ion battery: • Cradles: • Single Slot USB Charge Only Cradle - with power supply for fast charging • Single Slot Multi-interface Bluetooth Cradle - with power supply; powered from host (slow charge) • Four Slot Charge Only Cradle - with power supply • Four Slot Ethernet Cradle - with power supply. • Spare Battery Charger: • Four Slot Battery Charger - with power supply. • Cables (and a power supply): • USB Client Charge Cable • RS-232 Serial Cable - with power supply. Use a cradle or a charge cable to charge the Li-ion battery in the device. Use either the four slot cradle or four slot battery charger to charge up to four spare batteries. The charge cable requires a Motorola approved power supply. • Cradles Insert the device into a cradle. See Chapter 13, Accessories for accessory setup. The device starts to charge automatically. The charge LED on the device flashes during charging and goes off when the battery is fully charged (default). See Table 13-2 for charging indications. • Cables Connect a charge cable to the appropriate power source and connect the other end of the charge cable to the device. See Chapter 13, Accessories for accessory setup. The device starts to charge automatically. The charge LED on the device flashes during charging and goes off when the battery is fully charged (default). See Table 13-2 for charging indications. See Table 3-2 on page 3-3 for detailed scanning LED descriptions. IMPORTANT 1) If the host PC is powered off, for example every night, the device continues to operate from its battery until the battery is totally drained. Upon restart of the host PC, the device may not boot. The battery has to charge at a reduced charge rate until the battery acquires sufficient charge to boot the device. This can take up to two hours, depending on the level of discharge. 2) To prevent irreversible harm to battery do not store the device with the battery installed for extended periods of time. For maximizing battery life, see Battery on page 15-2. NOTE The default state of the LED is off when the battery is fully charged with the exception of several initial charge cycles. The LED may continually blink until the battery goes through several discharge cycles to calibrate itself.

Battery Safety Security Implementation/Protection From Counterfeit Batteries Motorola devices are designed to work only with Motorola batteries. If you see a battery fault indication on the device display, take the following steps: • Remove the battery and inspect it to confirm that it bears the Motorola name and/or logo. • If there is no Motorola name and/or logo, the battery is not a qualified battery. • If there is a Motorola name and/or logo, replace the battery and retry charging it. • If the message remains, contact a Motorola service center. Motorola Battery Safety Recommendations For Users Most battery issues arise from improper handling of batteries and particularly from the continued use of damaged batteries. • Do not disassemble, crush, puncture, shred or otherwise attempt to change the form of the battery. • Do not let the device or battery come in contact with water. Water can get into the circuits, leading to corrosion. If the device and/or battery get wet, have them checked by your administrator or contact Motorola even if they appear to be working properly. • Do not allow the battery to touch metal objects. If metal objects stay in prolonged contact with the battery contact points, the battery could become very hot. • Do not place the battery near a heat source. Excessive heat can damage the device or the battery. High temperatures can cause the battery to swell, leak or malfunction. Therefore: • Do not dry a wet or damp battery with an appliance or heat source, such as a hair dryer or microwave oven. • Avoid leaving the device in areas of high temperatures. • Do not drop the battery or device. Dropping these items, especially on a hard surface, can potentially cause damage. • Contact your service provider or Motorola if your device or battery was damaged from dropping or as a result of exposure to high temperatures. Proper and Safe Battery Disposal & Recycling Proper battery disposal is not only important for safety, it also benefits the environment. Promptly dispose of used batteries in accordance with local regulations. Contact your local recycling center or national recycling organizations for more information on how to dispose of batteries. Additional information on proper disposal and recycling may be found on the Web at: www.motorola.com/recycling and www.rbrc.org/call2recycle/. IMPORTANT Battery safety depends on the proper selection and care of batteries. IMPORTANT Handle and store batteries properly to avoid injury or damage. IMPORTANT Use only Motorola-branded batteries and chargers. WARNING! Use of a non-Motorola battery or charger may present a risk of fire, explosion, leakage or other hazard.

MT2070/MT2090 User Guide Sending Data to the Host Computer Out of the box, the device supports two modes to send data to a host computer: via cable (RS-232 or USB); and via Bluetooth (open/paired with an STB2078 cradle). Cable Mode Via cable (RS-232 or USB) the user interface indicates the active mode for transmitting bar code data to the host. • A displays on the screen when bar code data transmits via USB. • An displays on the screen when bar code data transmits via RS-232. Bluetooth Mode In Bluetooth mode (open or cradle), a Bluetooth icon displays on the screen when bar code data transmits via Bluetooth. The cradle receives data from the device via a wireless radio connection and transmits it to the host computer via the host cable. The device and cradle must be paired for successful wireless communication. Pairing Pairing registers a device to the cradle such that the device and cradle can exchange information. The cradles operate in two modes: Point-to-Point and Multipoint-to-Point. In Point-to-Point mode, pair the device to the cradle either by inserting it in the cradle (if pairing on insertion is enabled), or by scanning the pairing bar code. In Multipoint-to-Point mode, you can pair up to seven devices to one cradle. To use this feature, scan the multipoint bar code in Multipoint-to-Point Communication on page 4-19. The cradle includes pairing bar codes on both its front and back. To pair the device with the cradle, scan a pairing bar code. A high-low-high-low beep sequence followed by a low-high beep sequence indicates successful pairing and connection to the remote device. A long low, long high beep sequence indicates unsuccessful pairing. Lost Connection to Host If scanned data does not transmit to the cradle's host, ensure that all cables are firmly inserted and the power supply is connected to an appropriate AC outlet, if applicable. If scanned data still does not transmit to the host, reestablish a connection with the host: 1. Disconnect the power supply from the cradle. 2. Disconnect the host interface cable from the cradle. 3. Wait three seconds. 4. Reconnect the host interface cable to the cradle. 5. Reconnect the power supply to the cradle, if the host requires. 6. Reestablish pairing with the cradle by scanning the pairing bar code. Radio Communications The device can communicate with remote devices via Bluetooth Technology Profile Support, or by pairing with a cradle. For radio communication parameters, detailed information about operational modes, Bluetooth Technology Profile Support and pairing, see Chapter 4, Radio Communications. NOTE The pairing bar code that connects the device to a cradle is unique to each cradle. Do not scan data or parameters until pairing completes.

Startup When the device is powered on for the first time, it initializes. The splash screen appears for a short period of time. If the device does not power on, see Resetting the Device on page 1-17. Figure 1-10 Splash Screen Suspending/Powering Off the Device A suspend menu item is accessible from Home screen. On the Home screen, press Menu > Suspend. Resetting the Device See Resetting the MT20X0 on page 2-106. Turning the WLAN Radio On and Off See Enable/Disable Radio on page 2-92. Waking the Device See Waking the MT20X0 on page 2-107. MT2000 series

MT2070/MT2090 User Guide Battery Removal To remove the battery: 1. Press Menu >Suspend to turn off the screen and place the device in suspend mode. 2. With your thumb, press down on the indentation on the battery lock and drag it away from the battery. 3. Lift up the back of the battery and pull it out of the battery well. Figure 1-11 Li-ion Battery Removal Spare Battery Charging Use the Spare Battery charger to charge spare Li-ion batteries. See to Chapter 13, Accessories for more information on spare battery charging. Screen Protector For added protection from scratches the device includes a protective film over the display window. It is recommended you leave this on for added scratch resistance. Battery lock WARNING! The device is not water sealed when the battery is removed.

Lanyard To install the optional lanyard: 1. Insert the loop on the lanyard into the slot at the bottom of the device. Figure 1-12 Insert Lanyard Loop 2. Thread the upper portion of the lanyard into the loop. Figure 1-13 Thread the Loop 3. Pull the clip through the loop over the tether point and tighten into place. Figure 1-14 Insert Loop into Tether Point

Introduction This chapter provides instructions for using and navigating the device.

MT2070/MT2090 User Guide Keypad The keypad contains alphanumeric characters, scroll keys, function keys and an ENT (Enter) key. The keypad is color-coded to indicate the alternate function keys (blue and orange). Note that an application can change the keypad functions so the device's keypad may not function exactly as described. SeeTable 2-1 on page 2-3 for key descriptions. Figure 2-1 MT2070/MT2090 Keypad TAB F F F F 2 4 7 5 8 9 6 3 0 F F F F F ESC ENT ABC DEF MNO GHI PQRS JKL TUV WXVZ ALT CTRL Right soft and CTRL key 4-way Navigation (Up, Down, Right, Left) Backspace and ESC key Cold boot trigger Enter key Orange key Left soft and ALT key Tab and * key Blue key NOTE The device does not have a Power key. To suspend the device go to Home screen; press the left soft key (Menu); scroll to Suspend; press ENT.

2 - 3 Keypad Functionality NOTE The keypad functionality described in Table 2-1 does not necessarily apply to all configurations of the MT20X0. Table 2-1 Keypad Functionality Key Description Press Blue Key Press Orange Key Left Soft Key, ALT Defaults to the left soft key which initiates the action noted on the bottom left of the screen (usually a menu option); ALT key when the Blue function key is enabled. ALT N/A Right Soft Key; CTRL Defaults to the right soft key which initiates the action noted on the bottom right of the screen; CTRL key when the Blue function key is enabled. CTRL N/A Up, Down, Left, Right Defaults to Scroll key allowing up, down, left, right navigation. N/A N/A Tab Defaults to TAB key; asterisk (*) when the Blue function key is enabled. Depending on the screen display, TAB moves from pane to pane in the contents section of a multipane display. * N/A Backspace, ESC Defaults to backspace; ESC when the Blue function key is enabled. Depending on the screen display: Returns to the previous level in the display. Closes the menu and returns to the previous screen. Clears a highlighted field. ESC N/A F1, 1, special characters Defaults to the number 1; F1 when the Blue function key is enabled; characters . , - when the Orange function key is enabled. F1 . , - * See Keypad Multi-tap Configuration on page 2-7. ALT CTRL TAB ESC F

MT2070/MT2090 User Guide * F2, 2, A, B, C, a, b, c Defaults to the number 2; F2 when the Blue function key is enabled; A, B, C, a, b, c when the Orange function key is enabled. In alpha mode (enable Orange function key), the number of key presses determines the letter and case. 1 key press = a 2 key presses = b 3 key presses = c 4 key presses = A 5 key presses = B 6 key presses = C F2 a, b, c, A, B, C * F3, 3, D, E, F, d, e, f Defaults to the number 3; F3 when the Blue function key is enabled; D, E, F, d, e, f when the Orange function key is enabled. In alpha mode (enable Orange function key), the number of key presses determines the letter and case. 1 key press = d 2 key presses = e 3 key presses = f 4 key presses = D 5 key presses = E 6 key presses = F F3 d, e, f, D, E, F * F4, 4, G, H, I, g, h, i Defaults to the number 4; F4 when the Blue function key is enabled; G, H, I, g, h, i when the Orange function key is enabled. In alpha mode (enable Orange function key), the number of key presses determines the letter and case. 1 key press = g 2 key presses = h 3 key presses = i 4 key presses = G 5 key presses = H 6 key presses = I F4 g, h, i, G, H, I Table 2-1 Keypad Functionality (Continued) Key Description Press Blue Key Press Orange Key * See Keypad Multi-tap Configuration on page 2-7. F 2 ABC F 3 DEF F 4 GHI

2 - 5 * F5, 5, J, K, L, j, k, l Defaults to the number 5; F5 when the Blue function key is enabled; J, K, L, j, k, l when the Orange function key is enabled. In alpha mode (enable Orange function key), the number of key presses determines the letter and case. 1 key press = j 2 key presses = k 3 key presses = l 4 key presses = J 5 key presses = K 6 key presses = L F5 j, k, l, J, K, L * F6, 6, M, N, 0, m, n, o Defaults to the number 6; F6 when the Blue function key is enabled; M, N, 0, m, n, o when the Orange function key is enabled. In alpha mode (enable Orange function key), the number of key presses determines the letter and case. 1 key press = m 2 key presses = n 3 key presses = o 4 key presses = M 5 key presses = N 6 key presses = O F6 m, n, o, M, N, 0 * F7, 7, P, Q, R, S, p, q, r, s Defaults to the number 7; F7 when the Blue function key is enabled; P, Q, R, S, p, q, r, s when the Orange function key is enabled. In alpha mode (enable Orange function key), the number of key presses determines the letter and case. 1 key press = p 2 key presses = q 3 key presses = r 3 key presses = s 4 key presses = P 5 key presses = Q 6 key presses = R 7 key presses = S F7 p, q, r, s, P, Q, R, S Table 2-1 Keypad Functionality (Continued) Key Description Press Blue Key Press Orange Key * See Keypad Multi-tap Configuration on page 2-7. F 5 JKL F 6 MNO F7PQRS

MT2070/MT2090 User Guide * F8, 8, T, U, V, t, u, v Defaults to the number 8; F8 when the Blue function key is enabled; T, U, V, t, u, v when the Orange function key is enabled. In alpha mode (enable Orange function key), the number of key presses determines the letter and case. 1 key press = t 2 key presses = u 3 key presses = v 4 key presses = T 5 key presses = U 6 key presses = V F8 t, u, v, T, U, V * F9, 9, W, X, Y, Z, w, x, y, z Defaults to the number 9; F9 when the Blue function key is enabled; W, X, Y, Z, w, x, y, z when the Orange function key is enabled. In alpha mode (enable Orange function key), the number of key presses determines the letter and case. 1 key press = w 2 key presses = x 3 key presses = y 4 key presses = W 5 key presses = X 6 key presses = Y F9 w, x, v, z, W, X, V, Z Home, 0, space Defaults to the number 0; Displays the Home screen when the Blue function key is enabled; space when the Orange function key is enabled. The Home key returns to the Home screen. The space ( ) can be used to: • select/clear check boxes • select an item. Home Note: Under most circumstances pressing the Home key brings the Navigator application to the foreground. However, Home key functionality depends upon the current screen display. This key cannot be programmed. Space Table 2-1 Keypad Functionality (Continued) Key Description Press Blue Key Press Orange Key * See Keypad Multi-tap Configuration on page 2-7. F 8 TUV F 9 WXVZ 0 ]

2 - 7 Keypad Multi-tap Configuration In alpha mode (when the Orange function key is enabled/tapped) the default sequence of multi-tapping a key is lower case first. For example, multi-taps of the 2 key displays 'a', 'b', 'c', 'A', 'B', 'C', lower case first. The multi-tap sequence can be changed by modifying the Multitap.reg file under the "\Platform" directory on the device. For detailed information, refer to the MT2070/MT2090 Integrator Guide, p/n 72E-117858-xx. ENT Press ENT (Enter) to launch an application or select a current/highlighted item. Depending on the screen, press Enter to: • close a display and return to the previous screen. • lock in an entered quantity and highlight an item field. • store data from an item field. • to edit a highlighted item. N/A N/A Orange Press this key once to enable the orange alpha and special character keys. Press the key again to disable alpha and special character keys and return to default key use. When enabled, a filled orange circle displays (see Screen Icons on page 2-9). When no circle displays, orange key functionality is disabled. N/A N/A Blue Press this key once to enable functionality of ALT, CTRL, *, ESC or a function key. When enabled, an empty blue circle displays (see Screen Icons on page 2-9). When no circle displays, blue key functionality is disabled. N/A N/A Table 2-1 Keypad Functionality (Continued) Key Description Press Blue Key Press Orange Key * See Keypad Multi-tap Configuration on page 2-7. ENT

MT2070/MT2090 User Guide Using the Keypad to Navigate Applications The screen is a non-touch screen. Navigation and control of an application is performed using the keypad. Entering Information To enter information: • Use the keypad. • Scan bar code data into data fields. • Use Microsoft® ActiveSync® to synchronize or copy information from the host computer to the device. For more information on ActiveSync, refer to the MT2070/MT2090 Integrator Guide (part number 72E-117858-xx). Entering Information Using the Keypad The alphanumeric keypads produce the 26-character alphabet (A-Z), numbers (0-9), function keys and assorted characters. The keypads’ default characters/functions are printed white, the alpha character/functions are printed orange and the function character/functions are printed blue. See Keypad on page 2-2 for keypad configurations.

2 - 9 Screen Icons Table 2-2 Icons Icon Description Battery Critical low battery (< 5% full); recharge. Battery fault. Battery fault; AC power applied. Low battery; recharge. Low battery; recharge. Battery is 25% full. Battery is 50% full. Battery is 75% full. Battery is fully charged. Low battery; charging using AC power source. Battery 25% full; charging using AC power source. Battery 50% full; charging using AC power source. Battery 75% full; charging using AC power source. Battery is fully charged; AC power source connected.

MT2070/MT2090 User Guide Connections Bluetooth is inactive (STB2078 cradle only). Bluetooth is active (STB2078 cradle only). RS-232 connection is active. USB connection is active. Keypad Functionality One time blue key functionality (see Blue on page 2-7). Unlimited orange key functionality (see Orange on page 2-7). Wireless Signals (MT2090 Only) No wireless signal or not associated. Very low signal. Low signal. Medium signal. Medium signal. Good signal. Excellent signal. Table 2-2 Icons (Continued) Icon Description

2 - 11 Home Screen When the device powers on, the first screen to display is the Home screen. This screen also launches when you press the Home key (see Home, 0, space on page 2-6). Figure 2-2 Home Screen Table 2-3 lists the options available on the Home screen. Use the Up or Down Scroll key to highlight an option in the list and press ENT to launch the screen. MT2070 MT2090 Table 2-3 Home Screen Options Option Description Scan Item On this screen the user can, scan, display and transmit bar code data. See page 2-17. Scan Inventory On this screen the user can enter inventory information and send it to a local file in the Windows CE file system. See page 2-20. Simple Inventory This is a batch inventory application similar to Scan Inventory. It differs in that it transmits data into the MT as scanned. For example, it does not alphabetize or group same bar codes. See page 2-26. ScanToIP The Scan-to-IP application allows you to scan directly to a host PC using your existing WiFi network. The application is pre loaded on newer Motorola MT2090 devices and can be downloaded from the Web to older models.See page 2-32. MCL (MT2070 Only) The MCL application on the device is a simple scanning application which performs scanning and sending bar codes to a host computer. See page 2-35. Image Viewer On this screen the user can preview, snap and save images. See page 2-39.

MT2070/MT2090 User Guide Menu The Home screen Menu provides access to User Settings, Device Status, Battery Status and an About screen. Press the Up or Down Scroll key to select an option. Press ENT to display the appropriate screen. Figure 2-3 Home Screen Menu Config... On this screen the user has access to the following features: • Wireless Companion - see page 2-41. • Settings - see page 2-93. • Rapid Deployment - see page 2-93. • MSP Agent - see page 2-94. • BTExplorer - see page 2-95. • Configure USB - see page 2-102. Utilities... On this screen the user has access to the following features: • File Explorer • Task Manager. See page 2-104. Menu This menu provides access to User Settings, Device Status, Battery Status and an About screen. See page 2-13. Table 2-3 Home Screen Options (Continued) Option Description

2 - 13 User Settings On this screen, make adjustments for the device’s beeper, backlight and time. Press the Up or Down Scroll key to select an option. Figure 2-4 User Settings Screen • Beeper Volume: Scroll to Beeper Volume and press the right or left Scroll key to choose a Low, Medium or High beeper volume. Press the right soft key (Done) to save changes and end the session. • Beeper Frequency: Scroll to Beeper Frequency and press the right or left Scroll key to choose a Low, Medium or High beeper frequency. Press the right soft key (Done) to save changes and end the session. • Backlight: Scroll to Backlight and press ENT to display the Backlight screen. Figure 2-5 Backlight Screen Scroll to the appropriate line. • Brightness: Use the right or left Scroll key to choose a brightness level for the display. • Battery Timeout: Using the keypad, enter a numeric value to set the seconds in which the backlight turns off when the device is exclusively using battery power. • AC Timeout: Using the keypad, enter a numeric value to set the seconds in which the backlight turns off when the device is not powered exclusively by battery power. • Press the right soft key (Done) to save changes and end the session.

MT2070/MT2090 User Guide • Date and Time: With Date and Time highlighted, press ENT to display the Date and Time screen. Figure 2-6 Date and Time Screen • Press TAB to toggle between Date: and Time: fields. • Press the right or left Scroll key to move to sub-fields within Date: and Time:. • Press the Up or Down Scroll key to change values. Press the right soft key (OK) to save changes and end the session. Press the left soft key (Cancel) to end the session without saving changes. • Time Zone: With Time Zone highlighted, press ENT to display the Time Zone screen. Figure 2-7 Time Zone Screen • Press TAB to toggle between Time Zone: and Auto adjust fields. • Press the Up or Down Scroll key to change the time zone. • Press the Space key (see Space key on page 2-6) to check/uncheck the Auto adjust box. Press the right soft key (OK) to save changes and end the session. Press the left soft key (Cancel) to end the session without saving changes.

2 - 15 Device Status This screen displays information about the device: model, serial number, Bluetooth, MAC address and ADCSvcs version. Figure 2-8 Device Status Screen Battery Status This screen displays the device’s battery information. Figure 2-9 Battery Status Screen NOTE MAC: field applies to the MT2090 only.

MT2070/MT2090 User Guide About This screen displays version and copyright information. Figure 2-10 About Screen Suspend On the Home screen (see Figure 2-2 on page 2-11) press Menu > Suspend to place the device in sleep mode. To wake the device, press any key.

2 - 17 Scan Item The Scan Item screen allows the user to transmit bar code data to the host PC. To access Scan Item, start at the Home screen, scroll to Scan Item and press ENT. Figure 2-11 Scan Item Screen The following options are available: • Scan a bar code. The data displays briefly in the Item: field and the bar code data transmits to the host PC (Quantity defaults to a value of one and transmits one bar code.) • Key an SKU or bar code data manually using the keyboard. Press ENT to transmit the data to the host PC. (Quantity defaults to a value of one and transmits one SKU or bar code.) • Press the up Scroll key to access the Quantity field; enter a quantity using the keyboard. Scan a bar code (or enter an SKU/bar code manually and press ENT). The data transmits x times, where x = the quantity entered, with a programmable delay between each transmit. • Select Menu > Options... to set the transmit format (see Menu on page 2-18). Quantity Enter the quantity of SKUs or bar code data to transmit to the host PC (1 to 99999). Quantity defaults to a value of one and transmits one bar code. Item The Item: field is highlighted by default. Scan a bar code or use the numeric keys to manually enter an SKU or bar code. The default symbology type is Code 128.

MT2070/MT2090 User Guide Menu Press the left soft key to display the Menu. Figure 2-12 Scan Item Screen - Menu Options Scroll to Options... and press ENT to display the options screen to set transmit bar code data options. Figure 2-13 Scan Item Screen - Menu - Options • Transmit: When you enter a quantity of two or more on the Scan Item screen, scroll to Transmit: in this display and press the left or right scroll key to select how to transmit bar code data - Together or Separate. • Delimiter: When you select to transmit bar code data Together, the Delimiter: field displays. Scroll to this field and press the left or right scroll key to choose a delimiter method - comma, semi-colon or tab. • Delay: When you select to transmit Separate bar code data, scroll to Delay: and enter the time in milliseconds to separate the transmission of data. • Barcode: Scroll to Barcode: to choose a symbology type - Code 128 or Code 39. • Clear Delay:The number of seconds a bar code clears after transmission. • Cancel: Press to cancel settings and return to previous screen. • Done: Press to save settings and return to previous screen. Transmit: Separate Transmit: Together

2 - 19 About... Displays information about the ScanItem application. Close Press the right soft key to close the screen and return Home. Close Scroll to Close and press ENT to exit and return Home.

MT2070/MT2090 User Guide Scan Inventory The Scan Inventory screen allows the user to enter inventory information and send it to a local file in the Windows CE file system. Set the file type in which to save the inventory data in Menu > Options screen > Format: (see Figure 2-16 on page 2-21). To access Scan Inventory, start at the Home screen, scroll to Scan Inventory and press ENT. Figure 2-14 Scan Inventory Screen - Default View When the Scan Inventory screen displays for the first time, the cursor defaults to the Quantity field. If a quantity is required, it must be entered prior to scanning or entering data in the Item: field. Use the Up or Down Scroll key to move from one field to another. Enter data as necessary. Location Use the keypad to enter a location. Location is an eight character alphanumeric field. Press the orange key to enable the alpha keypad; press the orange key again to enable the numeric keypad. When the alpha keypad is enabled and orange circle appears on the bottom of the screen. Figure 2-15 Scan Inventory Screen - Location The device remembers the location entered throughout the session, until it is changed and stores as the default location in location.xml.

2 - 21 Quantity Quantity defaults to a value of one to transmit one bar code to the host PC. Scroll to Quantity and use the keypad to enter the quantity of SKUs or bar code data to transmit to the host PC (1 to 99999). Item Scroll to Item and scan a bar code or use the keypad to enter an SKU or bar code to transmit to the host PC. The data displays on the screen for 3 seconds or less with a trigger or key press. The default symbology type is Code 128. Menu Press the left soft key to display the Menu. Figure 2-16 Scan Inventory Screen - Menu View Inventory Scroll to View Inventory and press ENT to display a list of the saved inventory items stored in the device. Each row in the list includes location, quantity and bar code/SKU. The current inventory stores in a .txt or .xml file located in the Applications/Inventory folder. If no inventory items were saved, the file does not exist and no contents display. If the file does exist, the items display in a list view with column headers for location, item and quantity. The View Inventory screen has several menu options for maintaining information saved in the inventory file. IMPORTANT Quantity must be entered prior to scanning or entering data in the Item: field.

MT2070/MT2090 User Guide View Inventory Menu The View Inventory menu includes several options to maintain and customize inventory data. On the View Inventory screen press the left soft key to display the menu items. Press the Up or Down Scroll key to select an option. Press ENT to display the appropriate screen. Figure 2-17 View Inventory Menu • Edit Ensure the item to edit is highlighted on the View Inventory screen, then press Menu > Edit. On the Edit Item screen (Figure 2-18) edit the inventory data as needed (scanning is disabled in this view and data must be edited manually). Press TAB to move from field to field. Use the keypad to edit the information in each field. Press the left soft key (Cancel) to cancel the edits and return to the View Inventory screen. Press the right soft key (OK) to save the edits. Figure 2-18 Edit Item Screen NOTE By default the orange key is not active in the Edit Item window. If necessary, press the orange key to enable/disable the alpha key pad.

2 - 23 • Delete Item Ensure the item to delete is highlighted on the View Inventory screen, then press Menu > Delete Item... . The following confirmation dialog displays. Press the left soft key (No) to cancel the delete and return to the View Inventory screen. Press the right soft key (Yes) to delete the selected inventory item. Figure 2-19 Delete Item Dialog • Delete All On the View Inventory screen, press Menu > Delete All... . The following confirmation dialog displays. Press the left soft key (No) to cancel the delete and return to the View Inventory screen. Press the right soft key (Yes) to delete all inventory items listed. Figure 2-20 Delete All Dialog • Transmit Selecting Transmit sends data to the host PC via the configured interface and protocol (such as USB HID keyboard). On the View Inventory screen, press Menu > Transmit to send data. NOTE Data is not deleted after transmission.

MT2070/MT2090 User Guide • Export Exporting formats data in a user friendly layout which can be downloaded from the device. On the View Inventory screen, press Menu > Export. The dialog in Figure 2-21 displays indicating the path of the file to be exported to the Application folder on the device. The default file name and type is export.txt. Press ENT to export all data and return to the View Inventory screen. Figure 2-21 Export Dialog • Save Saving data ensures that data is not lost during a warm or cold boot. For example, when the user inserts a new battery in the device, a save is recommended prior to switching batteries. On the View Inventory screen, press Menu > Save. The following dialog displays indicating a successful save. Press ENT to accept the save and return to the View Inventory screen. Figure 2-22 Save Dialog • Options On the View Inventory screen, press Menu > Options. Save Inventory Scroll to Save and press ENT to save the data to the location specified in the Options dialog. NOTE The export format, text or XML, is specified in Options... on page 2-25.

2 - 25 Options... Scroll to Options and press ENT to configure the inventory application. On this screen, set the file format and the file storage location to save data. The format is specified in an xml file located in the folder \application\inventory. Press the Up or Down Scroll key to move from field to field. Use the keypad to enter a value in the File: field; Press the right or left Scroll key to change the data within all other fields. Figure 2-23 Options Screen • File: Specify a file type. • Format: Specify a Text of XML file format. • Separator: Specify a delimiter (comma, semi-colon or tab). • Grouped: Currently not implemented. • Clear Delay:The time in seconds data is automatically cleared from the display after scanning. • Cancel: Press to cancel settings and return to previous screen. • Done: Press to save settings and return to previous screen. About... Displays information about the ScanInventory application. Close Scroll to Close and press ENT to exit and return Home.

MT2070/MT2090 User Guide Simple Inventory Similar to Scan Inventory, the Simple Inventory screen allows the user to enter and transmit inventory information. It differs from Scan Inventory in that it transmits data the same way the data is scanned into the MT. For example, if the user scans bar codes 123, 456, ABC, 123, 012, ABC in this order, the application transmits the bar codes to the host in the same order: 123 456 ABC 789 123 012 ABC Same data is not grouped or alphabetized. To access Simple Inventory, start at the Home screen, scroll to Simple Inventory and press ENT. Figure 2-24 Simple Inventory Screen - Default View Item When the Simple Inventory screen displays for the first time, the cursor defaults to the Item: field. Scan a bar code or use the keypad to enter an SKU or bar code to transmit to the host PC. The default symbology type is Code 128. Quantity If a quantity is required, it must be entered prior to scanning or entering data in the Item: field. Use the Up or Down Scroll key to move from one field to another. Enter data as necessary. Quantity defaults to a value of one to transmit one bar code to the host PC. Scroll to Quantity and use the keypad to enter the quantity of SKUs or bar code data to transmit to the host PC (1 to 99999). IMPORTANT Quantity must be entered prior to scanning or entering data in the Item: field.

2 - 27 Menu Press the left soft key to display the Menu. Figure 2-25 Simple Inventory Screen - Menu Transmit Selecting Transmit sends data to the host PC via the configured interface and protocol (such as USB HID keyboard). On the Simple Inventory screen, press Menu > Transmit > ENT to send data. View Inventory Scroll to View Inventory and press ENT to display a list of the saved inventory items stored in the device. Each row in the list includes location, quantity and bar code/SKU. The current inventory stores in a .txt or .xml file located in the Applications/Inventory folder. If no inventory items were saved, the file does not exist and no contents display. If the file does exist, the items display in a list view with column headers for location, item and quantity. The View Inventory screen has several menu options for maintaining information saved in the inventory file. NOTE Data is not deleted after transmission.

MT2070/MT2090 User Guide View Inventory Menu The View Inventory menu includes several options to maintain and customize inventory data. On the View Inventory screen press the left soft key to display the menu items. Press the Up or Down Scroll key to select an option. Press ENT to display the appropriate screen. Figure 2-26 View Inventory Menu • Delete Item Ensure the item to delete is highlighted on the View Inventory screen, then press Menu > Delete Item... . The following confirmation dialog displays. Press the left soft key (No) to cancel the delete and return to the View Inventory screen. Press the right soft key (Yes) to delete the selected inventory item. Figure 2-27 Delete Item Dialog

2 - 29 • Delete All On the View Inventory screen, press Menu > Delete All... . The following confirmation dialog displays. Press the left soft key (No) to cancel the delete and return to the View Inventory screen. Press the right soft key (Yes) to delete all inventory items listed. Figure 2-28 Delete All Dialog • Transmit Selecting Transmit sends data to the host PC via the configured interface and protocol (such as USB HID keyboard). On the Simple Inventory screen, press Menu > Transmit > ENT to send data. • Export Exporting formats data in a user friendly layout which can be downloaded from the device. On the View Inventory screen, press Menu > Export. The dialog in Figure 2-21 displays indicating the path of the file to be exported to the Application folder on the device. The default file name and type is export.txt. Press ENT to export all data and return to the View Inventory screen. Figure 2-29 Export Dialog • Save Saving data ensures that data is not lost during a warm or cold boot. For example, when the user inserts a new battery in the device, a save is recommended prior to switching batteries. On the View Inventory screen, NOTE Data is not deleted after transmission. NOTE The export format, text or XML, is specified in Options... on page 2-25.

MT2070/MT2090 User Guide press Menu > Save. The following dialog displays indicating a successful save. Press ENT to accept the save and return to the View Inventory screen. Figure 2-30 Save Dialog • Options On the View Inventory screen, press Menu > Options. Save Inventory Scroll to Save and press ENT to save the data to the location specified in the Options dialog. Options... Scroll to Options and press ENT to configure the inventory application. On this screen, set the file format and the file storage location to save data. The format is specified in an xml file located in the folder \application\inventory. Press the Up or Down Scroll key to move from field to field. Use the keypad to enter a value in the File: field; Press the right or left Scroll key to change the data within all other fields. Figure 2-31 Options Screen • File: Specify a file type. • Format: Specify a Text of XML file format. • Clear Delay:The time in seconds data is automatically cleared from the display after scanning. • Cancel: Press to cancel settings and return to previous screen. • Done: Press to save settings and return to previous screen.

2 - 31 About... Displays information about the ScanInventory application. Close Scroll to Close and press ENT to exit and return Home.

MT2070/MT2090 User Guide Scan-To-IP The Scan-to-IP screen allows the user to scan directly to a host PC using your existing wireless network. The application should be pre loaded on the Motorola MT2090 device. The host application must be installed on your PC or terminal host. Setup • Install the host application on your PC or terminal host. Visit http://www.scan-to-ip.com to download both the Windows host application and the device installer, if necessary. • Run the host application, ScanToIp.exe, from the Scan-to-IP folder on the PC or terminal host. • To access Scan-To-IP, start at the Home screen, scroll to Scan-To-IP and press ENT. Figure 2-32 Scan-To-IP Option on Home Screen • Click the Setup tab. Press the right soft key to display the Setup. Figure 2-33 Scan-To-IP Screen NOTE Scan-to-IP may not be loaded on older devices. In this case, download the application to your PC; establish an ActiveSync connection; run ScanToIpDeviceInstaller.exe to download it to the MT2090.

2 - 33 • Enter the Host (IP) address, or keep the default setting. • Press TAB to Enter the Host port no., or keep the default setting. Figure 2-34 Terminal Host Setup Screen • Click Create pairing barcode and print the bar code (imager units can scan the monitor). Figure 2-35 Host Application - PC Setup Screen

MT2070/MT2090 User Guide • Scan the bar code to pair with the host PC/server (print and scan the bar code or for imager units, scan the bar code directly on the monitor). Figure 2-36 Scan-to-IP Pair Bar Code • The host application and the MT2090 device should now be paired. The device installer can also be used to: • Configure the WLAN settings • Configure scanner settings • Buy and activate an advanced license for additional features. If you have problems or questions, select FAQ at http://www.scan-to-ip.com. Suspend Press the left soft key to suspend the device. (Press any key to wake the suspended device.)

2 - 35 MCL When you select MCL from the Home screen, the MCL-Client loads and the MCL program which loaded on the device runs. Figure 2-37 MCL-CIient Load - Typical View By default, the MCL application on the device is a simple scanning application which performs scanning and sending bar codes to a host computer, and scanning inventory with a timestamp. MCL-Collection is an intuitive, high-productivity software tool used to create, integrate and deploy enterprise, multimodal mobile worker applications quickly and easily. From bar code scanning and data capture on devices to ODBC, WMS, or SAP R/3 connectivity on the host, MCL-Collection provides seamless integration from the computer to host application. For more information refer to the MCL Technologies Start Up Guide for the MT2000 at: http://www.mcl-collection.com. When the MCL-Client loads, the Main Menu screen of the default MCL program loads. On this screen, select the mode (Scan Transmit on page 2-36 or Scan Inventory on page 2-37) of the MCL default scanning application. Figure 2-38 MT2000 Default Application Home Screen - Typical View NOTE The MCL client is pre-licensed on the MT2070 only. The MCL client on the MT2090 requires an activated license to run.

MT2070/MT2090 User Guide Scan Transmit When Scan Transmit is selected on the Main Menu, the Scan & Send screen displays. On this screen the user can manually enter a quantity and scan data to a computer using a tethered cable or a Bluetooth connection via the STB2078 cradle. Figure 2-39 Scan & Send Screen • : Use the keypad to enter a quantity into this field. Scanning is disabled when this field is highlighted. • : Scan a bar code to enter data into this field. After scanning data, the quantity and data are sent to MCL Link. NOTE On the first transmit; the application establishes communication with MCL link which may take several seconds.

2 - 37 Scan Inventory When Scan Inventory is selected on the Main Menu, the Scan Inventory screen displays (Figure 2-40). On this screen the user must enter the location in which the inventory is scanned. When a location is not entered, two short beeps sound indicating an error. 1. Use the keypad to enter a location and press ENT to continue. Figure 2-40 Scan Inventory Screen 2. Upon pressing ENT, the Scan screen displays. Figure 2-41 Scan Inventory Scan Screen 3. : Use the keypad to enter a quantity into this field. Scanning is disabled when this field is highlighted. 4. : Scan a bar code to enter data into this field. Scanned data in this screen is stored on the FFS file system and can be viewed, deleted, or transmitted to MCL Link.

MT2070/MT2090 User Guide 5. Use the right soft key to select MENU. The Inventory Menu displays. Figure 2-42 Inventory Menu Screen 6. Select the appropriate option and press the right soft key (OK) to perform the appropriate action (View Data, Send Data, Delete Last). View Data The View Data screen provides a list of all scanned data including the location, item, quantity, date and time. On this screen, press the right soft key to display menu options to edit a selected record, delete a selected record or delete all records. Figure 2-43 View Data Screen Send Data Select this option to transmit scanned data to the host PC MCL Link application. Delete Last Select this option to delete the last item scanned.

2 - 39 Image Viewer (Devices Equipped with Imagers) The Image Viewer screen allows the user to preview, snap and save images. To access Imager Sample, start at the Home screen, scroll to Imager Sample and press ENT Figure 2-44 Image Viewer Screen Menu Press the left soft key to display the Menu. Figure 2-45 Image Viewer Screen - Menu Preview On Scroll to Preview On and press ENT to display a preview of an image. Point the scan window at the image and press the scan trigger to take a picture. Open Scroll to Open and press ENT to display the File Explorer. Press the Up or Down Scroll key to find an image and press ENT to display it.

MT2070/MT2090 User Guide Options Scroll to Options and press ENT to display the Options screen. Press the up or down Scroll key to select an option to edit and press ENT. Figure 2-46 Options Screen • JPEG Quality: Picture quality indicator. Higher numbers produce better quality pictures and larger file sizes). • Illumination: Press the right and left scroll keys to turn illumination On or Off. The default is Off. Depending on the room lighting, an image captured by the device may appear too dark. The illumination feature allows you to adjust the lighting on the snapshot target. • Preview Aim: Laser emits when the trigger is pulled. About Displays information about the Imager demo application. Close Press the right soft key to close the screen and return Home.

2 - 41 Config To access Config, start at the Home screen, scroll to Config... and press ENT. Figure 2-47 Config... Screens Wireless Companion (MT2090 Only) The Wireless Companion is used to configure and manage the device’s wireless network settings. On the Config... screen press the up or down Scroll key to highlight Wireless Companion and press ENT to display the Wireless Companion menu. Figure 2-48 Config... Wireless Companion Menu MT2070 MT2090 NOTE Some screens and windows pictured in this section are samples and can differ from actual screens.

MT2070/MT2090 User Guide Find WLANs On the Wireless Companion menu, press the up or down Scroll key to highlight Find WLANs and press ENT to display the Find WLANs screen. Figure 2-49 Find WLANs Screen The Find WLANs list displays: • WLAN Networks:Available wireless networks. • Network Type: Type of network. 802.11(a), 802.11(b) or 802.11(g). • Channel: Channel on which the AP is transmitting. • Signal Strength: The signal strength of the signal from the AP. Highlight a network in the list and press ENT to open a pop-up menu which provides two options: Connect and Refresh. Select Refresh to refresh the WLAN list. Select Connect to create a WLAN profile from that network (see Manage Profiles on page 2-42). This opens the Profile Entry screen which allows you to set the values for the selected network. After editing the profile, the device automatically connects to this new profile. Manage Profiles The Manage Profiles screen provides a list of user-configured wireless profiles. Define up to 32 profiles at any one time. On the Wireless Companion menu, press the up or down Scroll key to highlight Manage Profiles and press ENT to display the Manage Profiles screen. Figure 2-50 Manage Profiles Screen

2 - 43 Icons next to each profile identify the profiles current state. The profiles are listed in priority order for use by the automatic roaming feature. Change the order by moving profiles up or down. Edit existing profiles by selecting one in the list and then pressing ENT to display the menu. The menu allows the selected profile to be connected, edited, disabled (enabled) or deleted. (Note: the Disable menu item changes to Enable if the profile is already disabled.) A dialog displays to confirm the users desire to delete a profile, if selected. Changing Profiles A completed profile is a set of configuration settings that can be used in different locations to connect to a wireless network. Create different profiles to have pre-defined operating parameters available for use in various network environments. When the Manage Profiles screen displays, existing profiles appear in the list. To change an existing profile, highlight a profile on the Manage Profiles screen, press ENT to display the menu, scroll to Edit and press ENT. Creating a New Profile Creating a new profile allows the user to configure profile name, ESSID, security, network address information and the power consumption level. Table 2-4 Profile Icons Icon Description No Icon Profile is not selected, but enabled. Profile is disabled. Profile is Cancelled. A Cancelled profile is disabled until a connect or login function is performed through the configuration editor. Profile is currently in use and describes an infrastructure profile not using encryption. Profile is currently in use and describes an infrastructure profile using encryption. Profile is currently in use and describes an ad-hoc profile not using encryption. Profile is currently in use and describes an ad-hoc profile using encryption. Profile is not valid in the device current operating regulatory domain.

MT2070/MT2090 User Guide Profile ID Press the up or down Scroll key on the profile menu and select Add. The Profile Entry dialog displays. Figure 2-51 Profile Entry Screen Profile Name The name and (WLAN) identifier of the network connection. Enter a user friendly name for the device profile used to connect to either an AP or another networked device. Example: The Public LAN. ESSID The ESSID is the 802.11 extended service set identifier. The ESSID is 32-character (maximum) case sensitive string identifying the WLAN and must match the AP ESSID for the device to communicate with the AP. Tab to Next > and press ENT to move to the Operating Mode dialog. Operating Mode Figure 2-52 2-33 Operating Mode/Country Screen NOTE Two profiles with the same user friendly name are acceptable but not recommended.

2 - 45 Operating Mode Select the operating mode (Infrastructure or Ad-Hoc) from the Operating Mode: drop-down list. The operating mode Infrastructure enables the device to transmit and receive data with an AP. Infrastructure is the default mode. Tab to Next > and press ENT to move to the next dialog. Table 2-5 Operating Mode Fields Field Description Operating Mode Infrastructure: Select Infrastructure to enable the device to transmit and receive data with an AP. Infrastructure is the device default mode. Ad Hoc: Select Ad Hoc to enable the device to form its own local network where devices communicate peer-to-peer without APs using a shared ESSID. If Ad-Hoc mode was selected, see Channel on page 2-46. If Infrastructure mode was selected, see Security Mode on page 2-47 Country Country: is used to determine if the profile is valid for the country of operation. The profile country must match the country in the options. page or it must match the acquired country if 802.11d is enabled. Single Country Use: When the device is only to be used in a single country, set every profile country to Allow Any Country. In the Options > Regulatory dialog box (see Figure 2-99 on page 2-77), set the country to the specific country the device is to be used in, and deselect (uncheck) the Enable 802.11d option. This is the most common and the efficient configuration. It eliminates the initialization overhead associated with acquiring a country via 802.11d. Multiple Country Use: When the device may be used in more than one country, select (check) the Enable 802.11d option in the Regulatory Options dialog box (see Figure 2-99 on page 2-77). This eliminates the need for reprogramming the country (in Options > Regulatory) each time a new country is entered. However, this only works if the infrastructure (i.e. APs) support 802.11d (some infrastructures do not support 802.11d, including some Cisco APs). When the Enable 802.11d option is selected, the Options > Regulatory > Country setting is not used. For a single profile that can be used in multiple countries, with infrastructure that supports 802.11d (including Symbol infrastructure), set the Profile Country to Allow Any Country. Under Options > Regulatory, select Enable 802.11d. The Options > Regulatory > Country setting is not used. For a single profile that can be used in multiple countries, but with infrastructure that does not support 802.11d, set the profile country to Allow Any Country, and de-select (uncheck) Enable 802.11d. In this case, the Options > Regulatory > Country setting must always be set to the country the device is currently in. This configuration option is the most efficient and may be chosen for use with any infrastructure. However, the Options > Regulatory > Country setting must be manually changed when a new country is entered. (continued)

MT2070/MT2090 User Guide Channel If Ad-Hoc mode was selected the Ad-Hoc Channel dialog displays. Figure 2-53 Ad-Hoc - Channel Screen Use the Ad-Hoc Channel dialog to configure the required information to create an Ad-Hoc profile. This dialog does not appear if you selected Infrastructure mode. Select a channel number from the Channel drop-down list. NOTE In the case of a country where DFS is implemented in band 5150-5250 MHz, Ad-hoc is not allowed and the user needs to move and select a channel in the 2.4 GHz band. NOTE Ad-hoc channels are specific to the country selected. Table 2-6 Ad-Hoc Channels Band Channel Frequency 2.4 GHz 1 2412 MHz 2 2417 MHz 3 2422 MHz 4 2427 MHz 5 2432 MHz 6 2437 MHz 7 2442 MHz 8 2447 MHz 9 2452 MHz 10 2457 MHz 11 2462 MHz

2 - 47 Security Mode If Infrastructure mode was selected the Security Mode dialog displays. Figure 2-54 Infrastructure - Security Mode/Authentication Type

MT2070/MT2090 User Guide Security Mode Use the Security Mode dialog to configure the Security and Authentication methods. If Ad-Hoc mode is selected, this dialog is not available and authentication is set to None by default. Select the security mode from the Security Mode drop-down list. The selection chosen affects the availability of other choices for Authentication Type and Encryption methods. • LEGACY (Pre-WPA): This mode allows the user to configure protocols not available in the other Security Mode selections: Open authentication / encryption; Open authentication with WEP 40 or WEP 128; and 802.1X authentications that use WEP128 Encryption. • WPA-Personal: This mode allows the user to configure a WPA-TKIP-PSK protocol. • WPA2-Personal This mode allows the user to configure WPA2-PSK protocols with the Advanced Encryption Standard (AES) encryption method. • WPA-Enterprise: This mode allows the user to configure profiles with 802.1X Authentication that uses WPA and TKIP encryption method. • WPA2-Enterprise: This mode allows the user to configure profiles with 802.1X Authentication that uses WPA2 with AES encryption method. Table 2-7 Security Modes Security Mode Authentication Types Encryption Types Pass-phrase/Hexkey Configuration Legacy (Pre-WPA) None, EAP-TLS, EAP-FAST, PEAP, LEAP, TTLS Open, WEP-40 (40/24), WEP-104 (104/24), TKIP, AES Enabled. User input required with pass-phrase/hex key configuration. WPA - Personal None TKIP Enabled. User input required with pass-phrase/hex key configuration. WPA2 - Personal None AES Enabled. User input required with pass-phrase/hex key configuration. WPA - Enterprise EAP-TLS, EAP-FAST, PEAP, LEAP, TTLS TKIP Disabled. No user input required for encryption key. WPA2 - Enterprise EAP-TLS, EAP-FAST, PEAP, LEAP, TTLS AES Disabled. No user input required for encryption key.

2 - 49 Authentication Type Select an available authentication type from the drop-down list. The options listed in the drop-down list are based on the selected Security Mode as shown in Table 2-8. The authentication types, other than None, all use IEEE 802.1x authentication to ensure that only valid users and sometimes servers can connect to the network. Each authentication type uses a different scheme using various combinations of tunnels, username/passwords, user certificates, server certificates and Protected Access Credentials (PACs). Tab to Next > and press ENT. Selecting PEAP, TTLS or EAP-FAST displays the Tunneled Authentication Type dialog. Selecting None displays the Encryption dialog. Selecting EAP-TLS displays the Installed User Certs dialog. Selecting LEAP displays the User Name dialog. Tunneled Authentication Use the Tunneled Authentication Type dialog to select the tunneled authentication options. The content of the dialog differs depending on the Authentication Type chosen. Figure 2-55 Tunneled Authentication Dialog Box Table 2-8 Authentication Options Authentication Description None Use this setting when authentication is not required on the network. EAP-TLS Select this option to enable EAP-TLS authentication. A user certificate is required; validating the server certificate is optional. EAP-FAST Select this option to enable EAP-FAST authentication. This type uses a PAC (Protected Access Credential) to establish a tunnel and then uses the selected tunnel type to verify credentials. PACs are handled behind the scenes, transparently to the user. Automatic PAC provisioning can, depending on the tunnel type, require a user certificate and the validation of a server certificate. Manual PAC provisioning is currently not supported. PEAP Select this option to enable PEAP authentication. This type establishes a tunnel and then based on the tunnel type, uses a user certificate and/or a username/password. Validating the server certificate is optional. LEAP Select this option to enable LEAP authentication. This type does not establish a tunnel. It requires a username and password. TTLS Select this option to enable TTLS authentication. This type establishes a tunnel and then based on the tunnel type, uses a user certificate and/or a username/password. Validating the server certificate is optional.

MT2070/MT2090 User Guide To select a tunneled authentication type: 1. Select a tunneled authentication type from the drop-down list. See Table 2-9 for the Tunnel Authentication options for each authentication type. 2. Select the User Certificate check box if a certificate is required. If the TLS tunnel type that requires a user certificate is selected, the check box is already selected. 3. Tab to Next > and press ENT. The Installed User Certificates dialog displays. Table 2-9 Tunneled Authentication Options Tunneled Authentication Authentication Type Description PEAP TTLS EAP-FAST CHAP X Challenge Handshake Authentication Protocol (CHAP) is one of the two main authentication protocols used to verify the user name and password for PPP Internet connections. CHAP is more secure than PAP because it performs a three way handshake during the initial link establishment between the home and remote machines. It can also repeat the authentication anytime after the link is established. EAP-GTC X X EAP-GTC is used during phase 2 of the authentication process. This method uses a time-synchronized hardware or software token generator, often in conjunction with a user PIN, to create a one-time password. MD5 X Message Digest-5 (MD5) is an authentication algorithm developed by RSA. MD5 generates a 128-bit message digest using a 128-bit key, IPSec truncates the message digest to 96 bits. MS CHAP X Microsoft Challenge Handshake Authentication Protocol (MS CHAP) is an implementation of the CHAP protocol that Microsoft created to authenticate remote Windows workstations. MS CHAP is identical to CHAP, except that MS CHAP is based on the encryption and hashing algorithms used by Windows networks and the MS CHAP response to a challenge is in a format optimized for compatibility with Windows operating systems.

2 - 51 User Certificate Selection If the user checked the User Certificate check box on the Tunneled Authentication dialog or if TLS is the selected authentication type, the Installed User Certificates dialog displays. Select a certificate from the drop-down list of currently installed certificates before proceeding. The selected certificate’s name appears in the drop-down list. If the required certificate is not in the list, install it. Figure 2-56 Installed User Certificates Dialog Box MS CHAP v2 X X X Microsoft Challenge Handshake Authentication Protocol version 2 (MS CHAP v2) is a password-based, challenge-response, mutual authentication protocol that uses the industry-standard Message Digest 4 (MD4) and Data Encryption Standard (DES) algorithms to encrypt responses. The authenticating server challenges the access client and the access client challenges the authenticating server. If either challenge is not correctly answered, the connection is rejected. MS CHAP v2 was originally designed by Microsoft as a PPP authentication protocol to provide better protection for dial-up and virtual private network (VPN) connections. With Windows XP SP1, Windows XP SP2, Windows Server 2003 and Windows 2000 SP4, MS CHAP v2 is also an EAP type. PAP X Password Authentication Protocol (PAP) has two variations: PAP and CHAP PAP. It verifies a user name and password for PPP Internet connections, but it is not as secure as CHAP, since it works only to establish the initial link. PAP is also more vulnerable to attack because it sends authentication packets throughout the network. Nevertheless, PAP is more commonly used than CHAP to log in to a remote host like an Internet service provider. TLS X X EAP TLS is used during phase 2 of the authentication process. This method uses a user certificate to authenticate. Table 2-9 Tunneled Authentication Options (Continued) Tunneled Authentication Authentication Type Description PEAP TTLS EAP-FAST

MT2070/MT2090 User Guide User Certificate Installation There are two methods available to install a user certificate for authentication. The first is to obtain the user certificate from the Certificate Authority (CA). This requires connectivity with that CA. The second method is to install the user certificate from a file that was placed on the device. To install a user certificate from the CA: 1. Tab to Install Certificate and press ENT. The Import Certificate dialog displays. Figure 2-57 Import Certificate Dialog Box 2. Select Import User Cert from Server and select OK. The Install from Server dialog displays. Figure 2-58 Install from Server Dialog Box 3. Enter the User:, Password: and Server: information in their respective text boxes. 4. Tab to Retrieve. A Progress dialog indicates the status of the certificate retrieval, or tab to Exit and press ENT. After the installation completes, the Installed User Certs dialog displays and the certificate is available in the drop-down for selection. NOTE To successfully install a user certificate, the device must already be connected to a network from which the server is accessible.